2019 Hino NV8J
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2019 Hino NV8J. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2019 Hino NV8J. Newest first.
Hino Motor Sales U.S.A., Inc. (Hino) is recalling certain 2018-2019 NE8J, NJ8J, and NV8J trucks. The engine valve train adjustment screw lock nuts may not have been properly tightened manufacturing, possibly resulting in them coming loose within the engine and damaging it.
Risk and remedy
Risk
The damage to the engine may result in it shutting off and increasing the risk of a crash.
Remedy
Hino will notify owners, and dealers will inspect the torque on the valve train adjustment screw lock nuts. If a nut is found missing, the engine will be replaced, free of charge. The recall began on May 18, 2018. Owners may contact Hino customer service at 1-248-699-9390. Hino's number for this recall is AA9Q0.
Hino Motor Sales U.S.A., Inc. (Hino) is recalling certain 2018-2019 NE8J, NJ8J and NV8J trucks. The terminal bolts that secure the main fuse terminals within the fuse block may not have been properly tightened, possibly resulting in electrical arcing and overheating, or an engine shutdown.
Risk and remedy
Risk
An electrical arc or overheating can increase the risk of a fire. An engine shutdown can increase the risk of a crash.
Remedy
Hino will notify owners, and dealers will tighten any loose terminal bolts and replace any damaged electrical harness, free of charge. The recall began on March 10, 2018. Owners may contact Hino customer service at 1-248-699-9390. Hino's number for this recall is M0320.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11000898This article will provide dealership technicians with information on how to open a tech assist case and discuss what is required when opening a Tech Assist Case.
- 11000897After connecting to a truck using DX3, it may be necessary to review or create a DX Diagnostic Report for review.
- 10117661Sb-15-003 correction of workshop manual for hino 2015my (revision of troubleshooting procedure for the dtc p0421)
- 10117660Sb-15-002 correction of workshop manual for 2013 - 2015my (revision of troubleshooting procedure for the dtc p2123)
- 10116069SB - 08 - 005 This document is to inform dealers and workshops of the design change to the hood damper, support bolt and the addition of a support collar.
- 10116060SB ? 06 - 002 Fuel Filter Usage. This bulletin provides technical information for proper Fuel Filter usage as well as an example of damage caused by foreign material allowed to enter the fuel system as a result of using an improper fuel filter.
- 10116059SB ? 06 - 001 DESIGN CHANGE OF ENGINE OIL COOLER HOUSING. The casting for the engine oil cooler housing has been revised to include 2 shallow machined grooves on both sides of the engine oil cooler housing. These grooves aid in the retention of liquid gasket used during engine production. This changed the appearance of the engine oil cooler housing but does not affect function or applicability.
- 10116057Sb - 05 - 005 proper maintenance procedures for grease lubricated front axles
- 10116055SB ? 05 - 008 This document is to inform the dealers about the addition of the pressure sensor cover and related part for the J08E engine.
- 10116054Sb ? 05 - 007 design change of water pipe for J08E
- 10116053SB - 05 - 003 This document is to inform dealers and workshops on procedures to activate exhaust brake operation.
- 10116052SB ? 05 - 010 CORRECTION TO WORKSHOP MANUALS FOR THE J08E ENGINE. a) Resistance between terminals of the air intake pre-heater relay should be 64.0 ? 96.0 Ohms b) Illustration of the air intake pre-heater terminal should be revised. c) Resistance between terminals of the main relay should be 111 Ohms
- 10116051SB - 05 - 004 SPEEDOMETER RECALIBRATION. This document is to inform of the procedure to calibrate the Pulse Adjust Module whenneeded (ex. tire size change, rear carrier ratio change).
- 1011605005 - 011 CORRECTIONS TO WORKSHOP MANUALS FOR J08 ENGINES. The standard gap between ends of the second piston ring and the oil ring.
Every Hino NV8J model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.