2020 Hyundai Ioniq Hybrid
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Hyundai › Ioniq Hybrid › 2020
These records cover every 2020 Hyundai Ioniq Hybrid. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Owner complaints
17 complaints3 involved a crash1 involved a fire1 injuries
What owners report most
Latest complaints
- Electrical system · Power train · Steering
While attempting a slow right turn from a complete stop at an intersection, I heard a loud thunk sound followed by an immediate loss of power steering response. The steering wheel spun freely with little resistance while the front tires did not respond proportionally. I was able to safely pull…
While attempting a slow right turn from a complete stop at an intersection, I heard a loud thunk sound followed by an immediate loss of power steering response. The steering wheel spun freely with little resistance while the front tires did not respond proportionally. I was able to safely pull over. Upon restarting the vehicle it produced an abnormal wheezing sound suggesting additional mechanical stress. At the time of the failure the vehicle had approximately 40,000 miles, which I believe represents a premature failure for a safety-critical steering component. The vehicle was brought to a Hyundai dealership for inspection. The dealer pulled diagnostic fault codes, found none, performed a 20-minute test drive, and returned the vehicle stating they could not find anything wrong. No physical inspection of the steering components was performed. The failure condition — a slow full-lock turn from a complete stop — was never specifically replicated during the dealer's test drive. The problem has not been confirmed or repaired by the dealer. The vehicle is available for inspection. My safety and the safety of other drivers was put at risk by the sudden and unexpected loss of steering control. No warning lights appeared prior to or during the failure.
- Electrical system
The charge controller failed twice and one of the times I was out on a dangerous road where there wasn’t a safe spot to pull over. It was very sketchy.
- Unknown or other
The horn on my 2020 Hyundai Ioniq has stopped working. I checked the fuses and they are all good. Hyundai currently has several other models with recalls or at least known to fail. Yes my vehicle is available for inspection and no I have not had it looked at yet… dealer wants to keep it for 3-5…
The horn on my 2020 Hyundai Ioniq has stopped working. I checked the fuses and they are all good. Hyundai currently has several other models with recalls or at least known to fail. Yes my vehicle is available for inspection and no I have not had it looked at yet… dealer wants to keep it for 3-5 days to diagnose and further, given the nature of the issue, I don’t feel I should be responsible for any fees involved in doing so. It poses me a major safety concern as I cannot warn other cars of potential collision etc. Unfortunately, this problem does not have any type of warning message to let you know. I had to find out by trying to use my horn when someone almost hit me. This appears to me as a Hyundai manufacturing issue that also affects the Ionic line.
- Unknown or other
See attached document for complaint
- Power train
The contact owns a 2020 Hyundai Ioniq Hybrid. The contact stated that while idle, releasing the brake and pressing the accelerator, the vehicle would jolt forward before accelerating. The failure would occur intermittently and had become progressively more pronounced. There were no warning lights…
The contact owns a 2020 Hyundai Ioniq Hybrid. The contact stated that while idle, releasing the brake and pressing the accelerator, the vehicle would jolt forward before accelerating. The failure would occur intermittently and had become progressively more pronounced. There were no warning lights illuminated. During the most recent occasion, the vehicle jolted forward so aggressively that it caused the contact to have whiplash. The contact had to refrain from work due to the whiplash symptoms sustained, such as neck pain and nausea. The vehicle was taken to the dealer twice, and the dealer was not able to diagnose the cause of the failure. The dealer was able to experience the failure described when inspecting the vehicle. The vehicle was not repaired. The manufacturer was informed of the failure and confirmed the vehicle was not covered under warranty or recall. The manufacturer filed a complaint. The failure mileage was approximately 60,000.
- Unknown or other
Car has two horns, both STOPPED working completely about 2 1/2 years ago and were replaced by the Hyundai dealer in Florence, SC. High pitch horn failed again about 1 year ago, and low pitch horn has now failed. Local Hyundai dealership in Pensacola, FL npow wants $800 to replace what should be…
Car has two horns, both STOPPED working completely about 2 1/2 years ago and were replaced by the Hyundai dealer in Florence, SC. High pitch horn failed again about 1 year ago, and low pitch horn has now failed. Local Hyundai dealership in Pensacola, FL npow wants $800 to replace what should be fully covered. Car now has 75,00 miles so they say it us out of warrenty. But, a safety issue on a known problem (per Hydai frum on line and personal experience) should be fully covered by Hyundai.
- Service brakes
The Hyundai Ioniq was designed with a dual clutch system for the electric motor and gas motor. This was done to disengage and engage either separately when necessary for low power, regen braking, etc. However, this design heavily impacts the behavior of the brakes and safety of the vehicle overall.…
The Hyundai Ioniq was designed with a dual clutch system for the electric motor and gas motor. This was done to disengage and engage either separately when necessary for low power, regen braking, etc. However, this design heavily impacts the behavior of the brakes and safety of the vehicle overall. When the brakes are applied, the ECU will turn off the gas engine to conserve gas in regen braking mode. Additionally, the ECU will downshift the transmission. Downshifting the transmission and disengaging the gas engine become an issue because conducting both actions removes significant resistance in braking. Causing the vehicle to lurch when the downshift occurs while also increasing stopping distance. This downshift can be felt when braking as both loss of brake power and vehicle lurch. The system also does not account for this brake power loss by increasing brake booster response.
- Equipment adaptive/mobility › Vehicle controls › Speed control · Lane departure › Lane keep › Automatic steering
The contact owns a 2020 Hyundai Ioniq. The contact stated that while driving 70 MPH with the adaptive cruise control and lane keep assist features activated, the check engine warning light suddenly illuminated and the steering wheel seized causing the driver to lose control of the steering and the…
The contact owns a 2020 Hyundai Ioniq. The contact stated that while driving 70 MPH with the adaptive cruise control and lane keep assist features activated, the check engine warning light suddenly illuminated and the steering wheel seized causing the driver to lose control of the steering and the vehicle crashed into a concrete barrier. After restarting the vehicle, the check engine warning light was no longer illuminated and the vehicle operated as normal. No injuries were reported and no police report was taken. The cause of the failure was not determined. The manufacturer and local dealer were not notified of the failure. The failure mileage was 37,859.
- Electrical system · Unknown or other
***2020 HYUNDAI IONIQ TURNS ITSELF ON, WITHOUT HUMAN ASSISTANCE OR MODERATION. HUMAN DOES NOT NEED TO BE IN THE CAR FOR THIS TO HAPPEN, MEANING IT COULD OCCUR 24/7, SANS DRIVER, AND IS A SAFETY ISSUE.*** *Months of random electrical odd events. Example: the car does not know it’s off or Not…
***2020 HYUNDAI IONIQ TURNS ITSELF ON, WITHOUT HUMAN ASSISTANCE OR MODERATION. HUMAN DOES NOT NEED TO BE IN THE CAR FOR THIS TO HAPPEN, MEANING IT COULD OCCUR 24/7, SANS DRIVER, AND IS A SAFETY ISSUE.*** *Months of random electrical odd events. Example: the car does not know it’s off or Not shifting correctly *June 6, 2023 - 8am - I entered the car and got settled. The steering wheel is locked…it was not like that the last time I was in the car. I turned the car on, shifted to reverse, and the steering wheel remained locked. I couldn’t fix it so I decided to get out of the car and call for service. *June 6 2023 - Attempting to leave the car. Put the car in park, set the parking break, turned car off, and opened door to get out. When my left foot touched the pavement the Ioniq turn itself back on. I thought I had messed up but nope. I took several videos. I could not leave the car bc it would NOT STAY SHUT OFF. *June 6, 2023 - Called Hyundai service. They could do nothing but had service drivers out and I would get a call back, meantime I had to stay inside the running car. I kept trying the ignition button to get it to stay off. FINALLY randomly unlocked the steering wheel so I drove to the service center. *June 6, 2023 - Hyundai has had my car for 7 days without being officially written up and service started. I cannot get an update from them and have no loaner. I will be taking an UBER there tomorrow to check in person.
- Structure › Body
The contact owns a 2020 Hyundai Ioniq. The contact stated that while driving approximately 35 MPH a sudden booming sound occurred near the front passenger’s side of the vehicle. After stopping to inspect the vehicle it was discovered that the front driver’s side wheel well and bumper dislodged and…
The contact owns a 2020 Hyundai Ioniq. The contact stated that while driving approximately 35 MPH a sudden booming sound occurred near the front passenger’s side of the vehicle. After stopping to inspect the vehicle it was discovered that the front driver’s side wheel well and bumper dislodged and was rubbing against the front passenger’s side wheel. The contact was able to adjust the damaged body part from rubbing against the wheel and continued to drive the vehicle. The cause of the failure was not yet determined. The local dealer and manufacturer were not yet notified of the failure. The failure mileage was 46,650.
- Lane departure › Assist
The lane departure keep system has a major firmware bug. When the car is moving along a sweeping right hand turn from the farthest left lane, the vehicle senses that the car is going to cross the lane line to the right and jerks the steering wheel back towards dead center. This throws the vehicle…
The lane departure keep system has a major firmware bug. When the car is moving along a sweeping right hand turn from the farthest left lane, the vehicle senses that the car is going to cross the lane line to the right and jerks the steering wheel back towards dead center. This throws the vehicle towards the left hand curb. The driver must react quickly to jerk the wheel back to the proper position. This takes a reasonable amount of force that not all drivers may possess. Hyundai dealer service technicians are aware of this issue but can only "detune" the system to make it slightly less sensitive.
- Electrical system · Fuel/propulsion system · Vehicle speed control
While on cruise control when climbing a hill, a warning appears telling me that the EV has failed and that I should stop driving the vehicle. At the time the warning appears the cruise control shuts off and the car slow dramatically. All 5 times this has happened the vehicles behind me have had…
While on cruise control when climbing a hill, a warning appears telling me that the EV has failed and that I should stop driving the vehicle. At the time the warning appears the cruise control shuts off and the car slow dramatically. All 5 times this has happened the vehicles behind me have had to slam on their brakes in order to avoid running me over. Once it was a triaxle dump truck, fully loaded, he went off the right side of the road and almost hit the guardrails to avoid the collision. The car has been tested at our dealership (Jenkins Hyundai) and they have confirmed the issue.
- Electrical system · Unknown or other
My horn failed and was replaced in March of 2021. It stopped working again in January of 2022. The dealer replaced the horn the first time and another horn is on order with an unknown date of when the part will be available. This is a safety concern for me. I drive in the country and many deer…
My horn failed and was replaced in March of 2021. It stopped working again in January of 2022. The dealer replaced the horn the first time and another horn is on order with an unknown date of when the part will be available. This is a safety concern for me. I drive in the country and many deer run in the road. There has also been an incident where a child ran infront of my car while in my home city. Not having a horn poses a risk to me and others. I would not expect a car that is less than 2 years old to have a horn go out twice. I have driven 50 years and have never had a horn break. There was no warning prior to horn failure nor do I know how long the horn was broke.
- Structure › Body · Unknown or other
Received this code from the car: DTC C223986 DTC System CHASSIS DTC Sub System LKAS But NO ONE can tell me what it means...
- Unknown or other
On June 10, 2021, when driving from Topeka, KS to Park Ridge, IL, there was a failure in both the Adaptive Cruse Control System as well as the Lane Keeping Assistance System. The ACC system started the car moving forward from a complete stop without my intent and the LKA turned the car to the…
On June 10, 2021, when driving from Topeka, KS to Park Ridge, IL, there was a failure in both the Adaptive Cruse Control System as well as the Lane Keeping Assistance System. The ACC system started the car moving forward from a complete stop without my intent and the LKA turned the car to the right striking a semi trailer that was completely stopped. Additionally there was no warning from the Forward Collision Warning system
- Structure › Body
Glass spontaneously cracked
- Electrical system · Electronic stability control (esc) · Service brakes
On 3/27/2020 I purchased a hyundai ioniq 2020 which advertised on the window sticker vehicle includes advanced safety features bind spot collision avoidance assist and rear cross traffic collision avoidance assist. unfortunately, the manufacturer notified me on 8/24/2020 that the vehicle was not…
On 3/27/2020 I purchased a hyundai ioniq 2020 which advertised on the window sticker vehicle includes advanced safety features bind spot collision avoidance assist and rear cross traffic collision avoidance assist. unfortunately, the manufacturer notified me on 8/24/2020 that the vehicle was not manufactured as advertised. The features can't be added after the manufacturing process. the manufacturer offered me $500 for my inconvenience when I requested a vehicle buy-back to repurchase the like kind vehicle with the included safety features.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Pedestrian alert sounds
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for…
NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10251285This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
- 10247189This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
- 10243318This bulletin provides the procedure to update the Hybrid Control Unit (HCU) / Low DC/DC Converter (LDC) software logic to eliminate internal P-DTCs (that are not viewable) in certain 2019-2021MY IONIQ Hybrid (AE HEV) and 2021MY IONIQ Plug-in Hybrid (AE PHEV) vehicles.
- 10240087This Service Information bulletin provides information on how to update the Apple Carplay software from Hyundais Navigation Updates page. The current version of Google Maps has 10 times the data transmission compared to the previous version. As a countermeasure, an update with a frame skip logic has been added to resolve the data congestion with Google Maps.
- 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
- 10235346When servicing any of the specified vehicles below with the corresponding DTCs, C2416, Motor Short or Open LH (EPB) or C2417 Motor Short or Open RH (EPB), follow the step-by-step procedures in this bulletin.
- 10230904This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
- 10217258Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
- 10217251Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
- 10215599Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
- 10213725If you are servicing an applicable model with Hybrid Drive Motor (Traction Motor) improper operation or any DTC listed in the related shop manual, Motor Control System, refer to the shop manual for diagnosis. If the diagnosis indicates a faulty hybrid drive motor, refer to the Service Procedure and replace the hybrid drive motor.
- 10211680Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
- 10211678Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
- 10203272Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing
- 10191793This bulletin describes the procedure to update the EPB (Electronic Parking Brake) ECU to revise the logic of setting DTC C2416, Motor Short or Open LH (EPB) or C2417 Motor Short or Open RH (EPB) from vibrations while driving on certain roads.
- 10190044This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
- 10190038This bulletin provides best practice recommendations when performing brake service procedures.
- 10189991When using Wireless CarPlay, the system may intermittently auto disconnect. When Wireless CarPlay is disconnected, a pop up message Phone Not Responding. Please reconnect it and try again will appear on the radio screen.
- 10189989This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.
- 10185443When using Wireless CarPlay, the system may intermittently auto disconnect. When Wireless CarPlay is disconnected, a pop up message Phone Not Responding. Please reconnect it and try again will appear on the radio screen.
- 10183963This bulletin describes the procedure to inspect and identify fluid which may appear around the brake caliper area.
- 10183960This bulletin provides tire vibration service procedures, including how to optimize vehicle vibration performance. For all wheel/tire balance claims, the Tire Balance Data Sheet must be fully completed including imbalance and Road Force Variation (RFV) data. The Data Sheet can be found at the end of this bulletin.
- 10182327Certain 2020 MY Ioniq Plug-In (AE PHEV), Ioniq Hybrid (AE HEV), and 2020 - 2021 MY Sonata Hybrid (DN8 HEV) may exhibit a check engine light ON with a DTC P17A0 (Navigation Control Module). This bulletin describes the procedure to install an Audio Video Navigation (AVN) software update to address the condition stated above.
- 10182304This bulletin provides information and procedures for collecting OBD In Use Monitor Performance Ratio (IUMPR) data on certain 2019-2021MY vehicles at California dealers. This reporting is mandated by CARB (California Air Resources Board).
- 10181006This bulletin describes the procedure to replace the fuse cover that may be out of specification.
- 10180985Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly.
- 10180981This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
- 10179246Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft assembly.
- 10179244This bulletin provides information regarding replacement of the column-mounted Motor Driven Power Steering (MDPS) system as separate components.
- 10178175This bulletin provides information regarding condensation related to moisture accumulation in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. The TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes, or during normal driving operation.
- 10176182This bulletin provides information on tire maintenance best practices and procedures for dealers and customers to maximize tire life and performance.
- 10176178This bulletin describes the general guidelines to help disinfect and protect vehicle exterior/interior surfaces using recommended safe chemical products.
Every Hyundai Ioniq Hybrid model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.