2019 Hyundai Kona

Recalls

1 recall names the 2019 Hyundai Kona. Newest first.

• Engine

  Apr 28, 2021NHTSA 21V301000158,493 vehicles

  Hyundai Motor America (Hyundai) is recalling certain 2019-2020 Elantra, 2019-2021 Kona and Veloster vehicles equipped with 2.0L Nu MPI engines. The piston oil rings may not have been properly heat-treated, which could result in engine damage.

  Risk and remedy

  Risk

  A damaged engine may stall, increasing the risk of a crash. In addition, oil may leak onto hot exhaust components, increasing the risk of a fire.

  Remedy

  Dealers will inspect and, if necessary, replace the engine, free of charge. In addition, Hyundai will deploy Piston Ring Noise Sensing System (PNSS) software. Owner notification letters were mailed August 24, 2021. Owners may contact Hyundai customer service at 1-855-371-9460.

  Full recall details →

Owner complaints

What owners report most

1. Engine138
2. Unknown or other21
3. Power train19
4. Electrical system18
5. Fuel/propulsion system10
6. Engine and engine cooling9
7. Vehicle speed control9
8. Forward collision avoidance9
9. Lane departure7
10. Air bags5

Latest complaints

• Oct 24, 2026TX
  Engine · Unknown or other

  I have a 2019 Kona that has an issue with excessive oil consumption. I know that Hyundai issued a recall for this problem in 2019 Konas, but they claim my car isn’t included in that recall, and they refuse to help me. It feels like a scam on Hyundai’s part. my plate is: [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Oct 23, 2026KY
  Engine

  My vehicle was brought into Kerry Hyundai of Alexandria in December 2025 and is still there. It was brought in for warranty work. The original complaint was oil consumption. It is supposedly getting a replacement engine but it has been 10 months of them giving me the run around. I feel this timeline is unreasonable.

• Oct 20, 2026FL
  Engine · Power train
  My 2019 Hyundai Kona (VIN: [XXX]) experiences violent shaking and complete engine stalling in active traffic when braking, creating an immediate safety hazard on public roads. This directly mirrors the failure mechanics of Safety Recall 203 ([XXX]). Upon inspection, physical evidence of massive…

  My 2019 Hyundai Kona (VIN: [XXX]) experiences violent shaking and complete engine stalling in active traffic when braking, creating an immediate safety hazard on public roads. This directly mirrors the failure mechanics of Safety Recall 203 ([XXX]). Upon inspection, physical evidence of massive silver aluminum metal flakes was discovered clogging the VVT solenoid mesh screens, originating from internal cylinder/piston ring degradation. However, the dealership Universal Hyundai in [XXX] (RO# XXX) issued a fraudulent diagnostic report stating 'no metal found' to evade recall liability. Hyundai Motor America subsequently closed corporate case XXXwithout an internal engine or borescope inspection. I have retrieved the vehicle under financial protest and possess full photographic evidence of the aluminum contamination. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Oct 16, 2026FL
  Engine
  While driving my 2019 Hyundai Kona with the 2.0L engine, the engine suddenly began making a loud knocking sound. Immediately after exiting the highway onto a main street, the vehicle stalled in active traffic, causing a sudden loss of motive power and creating a significant safety hazard. The…

  While driving my 2019 Hyundai Kona with the 2.0L engine, the engine suddenly began making a loud knocking sound. Immediately after exiting the highway onto a main street, the vehicle stalled in active traffic, causing a sudden loss of motive power and creating a significant safety hazard. The first Hyundai dealership documented an engine knock and reported diagnostic trouble codes P0011, P0014, P0017, and P0366, involving camshaft timing and correlation. I was subsequently informed that the engine had suffered a catastrophic internal failure. A second Hyundai dealership later diagnosed a connecting-rod bearing failure affecting Cylinder 2. My vehicle is covered by Hyundai Recall 203, which concerns defective piston oil rings that can lead to abnormal oil consumption, engine damage, and potentially engine stalling. The vehicle previously passed Hyundai’s recall inspection/software procedure, but the engine has now experienced a catastrophic mechanical failure involving knocking and sudden stalling while driving. Hyundai has declined to replace the engine under the recall and has attributed the failure to an out-of-warranty maintenance/oil-related issue. I am also concerned about the reliability of the diagnostic process: the first dealership initially told me that a compression test had been performed and supported its conclusion about the engine failure, but later confirmed that no compression test had actually been performed. I am concerned that the prior recall remedy or inspection did not adequately identify or prevent the defect, and that an affected vehicle was allowed to remain in service until it suffered sudden engine failure and loss of motive power in traffic. I am requesting that NHTSA investigate whether this failure is related to Recall 203 and whether the recall remedy adequately protects owners whose vehicles initially passed the inspection but later experience engine damage, knocking, or stalling.

• Oct 13, 2026NY
  Engine · Suspension · Vehicle speed control
  Large amounts of oil slipped past the damaged rings into the engine. Oil could not stay no matter how many oil changes and proper maintenance. Hard metal shards got loose into the engine causing the engine to blow. Many codes came up in the diagnoses done by a Hyundai dealership. This has been…

  Large amounts of oil slipped past the damaged rings into the engine. Oil could not stay no matter how many oil changes and proper maintenance. Hard metal shards got loose into the engine causing the engine to blow. Many codes came up in the diagnoses done by a Hyundai dealership. This has been reported to be a common complaint and problem with this make and model/year of the car. It should not be my responsibility to fix. Its 100% a manufacturer error. Please assist me!

• Sep 30, 2026IA
  Engine
  On September 11, 2026, while driving my 2019 Hyundai Kona Limited 1.6L Turbo on the highway, the vehicle suffered a sudden and dangerous loss of propulsion. The engine began vibrating violently, lost power significantly, and a strong chemical burning smell entered the cabin. I was forced to pull…

  On September 11, 2026, while driving my 2019 Hyundai Kona Limited 1.6L Turbo on the highway, the vehicle suffered a sudden and dangerous loss of propulsion. The engine began vibrating violently, lost power significantly, and a strong chemical burning smell entered the cabin. I was forced to pull over immediately in traffic to avoid a catastrophic fire or highway collision. The vehicle had to be towed to McGrath Hyundai. The official dealership inspection (RO# 949326) confirmed severe internal manufacturing defects: cylinder wall scoring on cylinders 2, 3, and 4 due to premature piston ring wear, which caused massive oil fouling on the spark plugs and total ignition failure. This defect creates an immediate highway safety hazard and risk of engine fire due to oil entering the combustion chamber. Hyundai Motor America refuses to issue a safety recall for this 1.6L Gamma engine defect, leaving consumers driving unsafe vehicles with active loans.

• Sep 29, 2026CA90,000 mi
  Engine · Vehicle speed control
  The contact owns a 2019 Hyundai Kona. The contact stated that prior to purchasing the vehicle, the contact was informed that the vehicle had been previously repaired under recall. The contact stated that while driving approximately 25 – 35 MPH, and releasing the accelerator pedal, the vehicle…

  The contact owns a 2019 Hyundai Kona. The contact stated that prior to purchasing the vehicle, the contact was informed that the vehicle had been previously repaired under recall. The contact stated that while driving approximately 25 – 35 MPH, and releasing the accelerator pedal, the vehicle independently accelerated. The contact stated that the dealer was contacted. The vehicle was taken to the dealer to be diagnosed, and it was determined that the engine needed to be replaced. The VIN was not included in NHTSA Campaign Number: 21V301000 (ENGINE). The failure mileage was 90,000.

• Sep 19, 2026TX
  Structure › Body
  My Blue Hyundai Kona Ultimate paint is peeling from the roof. This can create a hazard if the paint chips in large pieces and flys obstructing visibility. The paint chipping is also close to the front windshield which can block the path of the wiper blades. Hyundai has acknowledged that certain…

  My Blue Hyundai Kona Ultimate paint is peeling from the roof. This can create a hazard if the paint chips in large pieces and flys obstructing visibility. The paint chipping is also close to the front windshield which can block the path of the wiper blades. Hyundai has acknowledged that certain year vehicles have a manufactures default of delaminated paint that could possible fly off in sheets. However, they have only recalled white colored vehicles for repair while doing nothing about other colored vehicles.

• Sep 16, 2026NH
  Engine

  I took my vehicle to a dealership for a recall and they refused to honor it. They made excuses and performed an unrelated service.

• Sep 14, 2026NY
  Engine
  Vehicle starting using extreme amounts of oil, lose acceleration and stalling while driving and making klicking noises. All symptoms point to Hyundai recall 203 (NHTSA campaign number 21V301000). Dealer and manufacturer refuse to fix it, citing lack of extended warranty and high mileage, as well…

  Vehicle starting using extreme amounts of oil, lose acceleration and stalling while driving and making klicking noises. All symptoms point to Hyundai recall 203 (NHTSA campaign number 21V301000). Dealer and manufacturer refuse to fix it, citing lack of extended warranty and high mileage, as well as insist of oil consumption test that would require me to drive the vehicle for another 1000 miles for them to be able to determine the oil consumption. Because I don't fee it is safe to drive the vehicle, I declined the test, but was willing to allow the dealer's service employees to drive it. They refused. I ended up donating the vehicle to Kars for Kids and notified them about the situation.

• Sep 7, 2026TX
  Engine · Fuel/propulsion system · Power train
  My 2019 Hyundai Kona SE (2.0L Nu MPI/Atkinson engine) was previously subject to NHTSA Recall 21V301000 (Hyundai Recall 203) for defective piston oil rings that can chip and cause accelerated oil consumption, engine knocking, and stalling. That recall's remedy was performed under a prior owner in…

  My 2019 Hyundai Kona SE (2.0L Nu MPI/Atkinson engine) was previously subject to NHTSA Recall 21V301000 (Hyundai Recall 203) for defective piston oil rings that can chip and cause accelerated oil consumption, engine knocking, and stalling. That recall's remedy was performed under a prior owner in December 2021. In November 2025, a Hyundai dealership installed a Cylinder Noise Diagnostic System (CNDS) software update (Service Campaign 974) specifically meant to detect this defect's vibration signature before it causes engine damage. Approximately 7,000-8,000 miles and about nine months after that software update, the vehicle stalled unexpectedly while being driven on two separate occasions, with no check-engine light or other warning beforehand. A third stall left the vehicle unable to restart. It was towed to a service station, which found no engine oil and no external leak. A Hyundai dealership subsequently diagnosed cracked valves that allowed approximately 5 quarts of oil to burn through the engine, and determined the engine requires complete replacement. This is the same failure mode (oil consumption/engine damage leading to stalling) that the original recall and the 2025 software update were both meant to prevent, and the software gave no advance warning before the stalling occurred. The vehicle and dealership diagnosis are available for inspection upon request.

• Aug 18, 2026CT81,000 mi
  Engine
  The contact's daughter owns a 2019 Hyundai Kona. The contact stated that while her daughter was driving 40 MPH, smoke started coming from under the hood. The vehicle lost power and came to a stop in front of a convenience store, blocking the entrance. Several unknown warning lights were…

  The contact's daughter owns a 2019 Hyundai Kona. The contact stated that while her daughter was driving 40 MPH, smoke started coming from under the hood. The vehicle lost power and came to a stop in front of a convenience store, blocking the entrance. Several unknown warning lights were illuminated. The driver called the Fire Department, and it was confirmed that the engine compartment displayed severe heating damage. There was no fire. The firemen on the scene recommended that the vehicle be towed. The vehicle was towed to an independent mechanic, and the contact was informed that the failure was a known failure and might be covered under an extended warranty program. The vehicle was towed to the dealer, where it was diagnosed and determined that the engine had seized. No electrical failure was found. The dealer initially offered to cover 95% of the cost of the repair. The manufacturer was notified of the failure and offered to cover 85% of the cost of the repair, but the contact declined. The contact stated that the Knock Sensor Detection System (KSDS) software update had previously been completed on the vehicle; however, the update failed to prevent the engine failure. The manufacturer informed the contact that the extended warranty could not be applied due to a transfer of ownership to the contact's daughter. The failure mileage was approximately 81,000.

• Aug 18, 2026OR
  Engine · Vehicle speed control
  The engine was spewing oil into the air filter and also out of a hose near the turbo. It was also consuming high amounts of oil, yes its available for inspection. I was driving on a busy public highway and my car lost power and would not accelerate no the problem has not been confirmed as of yet…

  The engine was spewing oil into the air filter and also out of a hose near the turbo. It was also consuming high amounts of oil, yes its available for inspection. I was driving on a busy public highway and my car lost power and would not accelerate no the problem has not been confirmed as of yet vehicle has not received official inspection yet there was zero warning lamps, messages, or any indicator of any kind that there was a problem. there still isnt

• Jul 16, 2026TX
  Engine
  The vehicle suffered a sudden, severe loss of power while driving, causing the engine to stall unexpectedly. This created an immediate hazard to myself and other motorists on the road, as I was forced to navigate a dead vehicle out of active traffic without power steering or power braking assist.…

  The vehicle suffered a sudden, severe loss of power while driving, causing the engine to stall unexpectedly. This created an immediate hazard to myself and other motorists on the road, as I was forced to navigate a dead vehicle out of active traffic without power steering or power braking assist. Prior to the total failure, the engine exhibited severe mechanical knocking, loss of acceleration, and high oil consumption without any visible external oil leaks. This engine failure is a direct result of the manufacturing defect detailed in NHTSA Safety Recall 203 (NHTSA Campaign 21V301000) concerning improperly heat-treated piston oil rings that cause severe cylinder scuffing and engine stall. Although the software update (Campaign 974) was previously completed on this VIN, the physical defect was never mechanically repaired. The software update failed to prevent the physical, defectively manufactured components from destroying the engine. Hyundai is refusing to honor the safety campaign and replace the failed engine because the recall database incorrectly lists the recall status as "completed."

• Jul 8, 2026VA
  Structure › Body

  First notice was exterior top railing coating wearing down after just 3 years of having car. Notified dealership of this issue and was stated that my car was out of warranty. (Now 7yo) Exterior Paint is peeling off hood; exposing primer layering, as well as in some spots, the main body itself. This is a known defect caused by factory laquer coating and of which dealership states they STILL will not cover repair.

• Jun 26, 2026FL
  Engine
  My 2019 Hyundai Kona has been burning oil, I’ve done great upkeep on it, including topping the oil off in between services. This is because it obviously has been burning oil, well recently it started stalling, then starting/turning it over has been acting up. The RPM’s have not been stable at all…

  My 2019 Hyundai Kona has been burning oil, I’ve done great upkeep on it, including topping the oil off in between services. This is because it obviously has been burning oil, well recently it started stalling, then starting/turning it over has been acting up. The RPM’s have not been stable at all an I’ve ran two diagnostic test on it, they came back as a “camshaft error” I can’t remember the exact code at the moment. However the mechanics I have questioned said it’s probably from the oil pressure being messed up from the oil burning up. Whether it be the sensor not regulating properly or the engine itself not getting enough lubricant. I have heard from others with Hyundais an it’s not just Kona’s, people are saying they burn through their oil fairly quickly compared to other cars they’ve had. With that being said, the car now stalls in traffic and the check engine light came on finally, that’s when we first ran diagnostics. Which I have had diagnostics ran at one place I go to for oil changes, a one at a Meineke, and soon to be a third at Autozone because I need to get the exact code again. I’m worried because my mom an I have been sharing this vehicle and the stalling makes it dangerous, it can be put in neutral and restarted but I have a service appointment with a dealership to see what they can do, however I feel this is happening from something caused straight from the manufacturer, not improper care or overuse. So I’m filing a complaint because if you stall while crossing traffic and could not restart, or know how to restart it, you could get in a wreck. This all seemed to start happening as well right after the vehicle rolled over 100,000 miles, go figure right? An if you needed to inspect this happening it would not be hard to do, all you would have to do is turn over the engine, then drive it for a bit an it will eventually stall, an you could also see the RPM’s bouncing and the noises it makes.

• Jun 16, 2026GA113,000 mi
  Engine · Engine and engine cooling
  The contact owns a 2019 Hyundai Kona. The contact stated that the vehicle had experienced excessive oil consumption. The contact stated that while driving 70 MPH on the highway, the vehicle stalled. The contact was unable to pull over to the side of the road. The contact was able to restart the…

  The contact owns a 2019 Hyundai Kona. The contact stated that the vehicle had experienced excessive oil consumption. The contact stated that while driving 70 MPH on the highway, the vehicle stalled. The contact was unable to pull over to the side of the road. The contact was able to restart the vehicle and continued driving. The contact stated that the failure recurred while driving into a parking lot. The battery warning light illuminated on several occasions. Additionally, the contact stated that the check engine and low oil pressure warning lights were intermittently illuminated. The vehicle was taken to Auto Zone and to an independent mechanic, where it was diagnosed and determined that the piston oil ring failure had caused low oil pressure, which resulted in the timing failure. The failure was related to NHTSA Campaign Number: 21V301000 (ENGINE). The dealer and the manufacturer were notified of the failure but denied a loaner vehicle or towing assistance to the dealer located 75 miles away. The vehicle was not repaired. The failure mileage was approximately 113,000.

• Jun 9, 2026TX100,000 mi
  Engine
  The contact owns a 2019 Hyundai Kona. The contact stated that while driving on several occasions at various speeds, the AWD warning light illuminated and was reset each time the vehicle was restarted. The contact also stated that over a couple of months, while downshifting, stopping, or…

  The contact owns a 2019 Hyundai Kona. The contact stated that while driving on several occasions at various speeds, the AWD warning light illuminated and was reset each time the vehicle was restarted. The contact also stated that over a couple of months, while downshifting, stopping, or decelerating, the vehicle stalled on several occasions. Additionally, the contact stated that while driving at approximately 30 MPH, the Check Engine warning light illuminated. The vehicle was then taken to an AutoZone, where a handheld diagnostic machine retrieved diagnostic trouble codes: P0017 (crankshaft) and P0171 (system too lean), and it was observed that the oil reservoir was empty. Two quarts of oil were added to the vehicle. The contact stated that after being serviced, the vehicle was idling high and stalled while driving at unknown speeds on several occasions. The vehicle was taken to a dealer, where it was diagnosed with a sheared timing pin, and it was determined that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was approximately 100,000.

• Jun 8, 2026TN105,000 mi
  Engine and engine cooling
  The contact owns a 2019 Hyundai Kona. The contact stated that while making left turns on several occasions, the vehicle stalled. The vehicle was shifted into park (P) and restarted. The vehicle was not diagnosed or repaired. However, during routine maintenance, an independent mechanic noticed that…

  The contact owns a 2019 Hyundai Kona. The contact stated that while making left turns on several occasions, the vehicle stalled. The vehicle was shifted into park (P) and restarted. The vehicle was not diagnosed or repaired. However, during routine maintenance, an independent mechanic noticed that the oil reservoir was empty, and an oil change was completed. The manufacturer was notified of the failure. The failure mileage was approximately 105,000.

• Jun 4, 2026CA
  Electrical system · Engine
  Vehicle (2019 Kona) is subject to Recall 203 (piston ring/bore defect). On XXX Puente Hills Hyundai refused the mandatory physcial inspection, instead attempting to charge $1,100 for 'leak repairs.' An independent inspection by Valvoline on XXX confirmed the engine is dry with no leaks, proving…

  Vehicle (2019 Kona) is subject to Recall 203 (piston ring/bore defect). On XXX Puente Hills Hyundai refused the mandatory physcial inspection, instead attempting to charge $1,100 for 'leak repairs.' An independent inspection by Valvoline on XXX confirmed the engine is dry with no leaks, proving the dealer's claim was fraudulent. Following a recent ECU update, the vehicle triggered a P0420 code—a known symptom of the internal engine damage covered by Recall 203. My Hyundai Corporate Case (#XXX) is currently stalled as the dealer refuses to provide technician notes or perform the safety inspection. I am operating an unsafe vehicle with documented internal mechanical failure. Requesting immediate intervention for a physical cylinder inspection. Please refer to the attached document (SUMMARY OF EVENTS) for the full chronology, supporting evidence, and email correspondence related to the dealership's refusal to perform Recall 203. See attached PDF (Evidence_Email_Correspondence) for documentation of the dealership's refusal to provide technician notes and their unprofessional communication regarding this safety recall. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• May 22, 2026TX78,000 mi
  Engine
  The contact owns a 2019 Hyundai Kona. The contact observed excessive oil consumption, which has progressively caused the vehicle to stall 2 to 3 times per week. While the engine can be restarted, it idles and runs roughly immediately afterward. Additionally, the contact noted a distinct smell of…

  The contact owns a 2019 Hyundai Kona. The contact observed excessive oil consumption, which has progressively caused the vehicle to stall 2 to 3 times per week. While the engine can be restarted, it idles and runs roughly immediately afterward. Additionally, the contact noted a distinct smell of burning oil exiting from the exhaust system. The contact referenced NHTSA Campaign Number: 21V301000 (ENGINE) however, the VIN was not included in the recall repair. The vehicle was taken to a independent mechanic where it was diagnosed to have excessive oil consumption. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 78,000.

• May 21, 2026FL120,132 mi
  Engine · Engine and engine cooling
  The contact owns a 2019 HYUNDAI Kona. The contact stated while driving the vehicle at an undisclosed speed, he noticed he had an engine knock, and noticed that the engine was consuming a good amount of oil with no warning lights or oil leaks. The contact pulled over to the side when the knock…

  The contact owns a 2019 HYUNDAI Kona. The contact stated while driving the vehicle at an undisclosed speed, he noticed he had an engine knock, and noticed that the engine was consuming a good amount of oil with no warning lights or oil leaks. The contact pulled over to the side when the knock started and noticed the vehicle was starving of oil although a recent oil change shows it was recent. The vehicle was taken to a dealer where it was diagnosed to have poor service, and engine sludge although dealer stated there was none. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 120,132.

• May 20, 2026VT
  Engine · Power train

  96,247 mi Engine knock and complete oil loss within 3,000 miles of last oil change Symptoms consistent with NHTSA Recall 21V301 (Hyundai Recall 203) and Warranty Extension TXXM coverage

• May 20, 2026MA
  Engine
  Vehicle frequently and quietly stalls while driving in active traffic, creating an immediate safety hazard. Vehicle is a 2019 Kona with the 2.0L Nu MPI engine, which is the exact subject of NHTSA Safety Recall 21V301 (Recall 209). Hyundai Motor America (Case #42541672) is actively refusing to honor…

  Vehicle frequently and quietly stalls while driving in active traffic, creating an immediate safety hazard. Vehicle is a 2019 Kona with the 2.0L Nu MPI engine, which is the exact subject of NHTSA Safety Recall 21V301 (Recall 209). Hyundai Motor America (Case #42541672) is actively refusing to honor or inspect the vehicle under the safety recall mandates, claiming a lack of dealership service history overrides a federal safety defect.

• May 6, 2026CA
  Engine

  Engine blew a head gasket so had to have the engine rebuilt @ a cost of $13,000. Car only had 22,500 miles on it. I think that should instigate a recall.

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Pedestrian alert sounds

  DP22005Opened Jan 27, 2023Closed Aug 7, 2023Recall 22V063000
  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for…

  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.

• Loss of Motive Power

  DP22003Opened Sep 12, 2022Closed Dec 12, 2023
  The National Highway Traffic Safety Administration (NHTSA) received a letter dated July 13, 2022, petitioning the Agency to initiate a safety defect investigation into loss of motive power allegations attributed to oil drain pan assembly failures on certain Hyundai Motor America, Inc. and Kia America, Inc. vehicles…

  The National Highway Traffic Safety Administration (NHTSA) received a letter dated July 13, 2022, petitioning the Agency to initiate a safety defect investigation into loss of motive power allegations attributed to oil drain pan assembly failures on certain Hyundai Motor America, Inc. and Kia America, Inc. vehicles spanning Model Years (MY) 2005-2021. The Petitioners cited examples of complaints indicating that the subject vehicles were experiencing rapid loss of engine oil due to oil drain plug back outs, resulting in loss of motive power and/or catastrophic engine damage. Additional complaints were provided which alleged that the oil drain pans lack sufficient structural integrity and are susceptible to cracking. The petition itself can be reviewed at NHTSA.gov under ODI number 11481745. On September 12, 2022, the Office of Defects Investigation (ODI) opened Defect Petition (DP22-003) to evaluate the Petitioners’ request. The Petitioners have provided additional complaints within four supplemental letters dated January 31, 2023, March 21, 2023, May 23, 2023, and August 4, 2023. ODI’s evaluation included the review and analysis of the complaints and supporting information submitted by the Petitioners, as well as additional complaints submitted directly to NHTSA which referenced either the oil drain plug or a crack in the oil pan. After reviewing the available data, ODI has not identified evidence that would support opening a defect investigation into the oil drain pan assemblies of the subject vehicles. Based on a review of the available information, a loss of motive power resulting from an oil drain plug back out has not occurred between the initial sale of a vehicle and the completion of its first oil change. If during an oil change service, a technician fails to remove the existing drain plug gasket before installing a new gasket, it is likely that a proper seal between the drain plug and the oil pan will not be made. An improper seal between the drain plug and oil pan could lead to the backing out on the drain plug, resulting in the sudden loss of oil while driving. Additionally, the provided examples of oil pan cracks were localized to the immediate vicinity of the oil drain plug and/or appeared to be the result of direct-contact with a tool during servicing.  There is no information to support that a vehicle-based defect exists relating to the oil pan assembly, and instead the documented incidents are related to the failure to follow the proper maintenance procedures during oil change service. In October 2023, Hyundai published a Technical Service Bulletin (TSB) that provided detailed instructions for oil change service on its gasoline powered vehicles, specifically highlighting the need to remove and replace the existing drain plug gasket prior to reinstalling the drain plug. After a thorough review of the material submitted by the petitioner, the information already in NHTSA's possession, and the potential risks to motor vehicle safety implicated by the petitioners' allegations, NHTSA does not believe that a formal investigation is warranted. Therefore, the petition is denied. A Federal Register Notice (FRN) further detailing NHTSA’s reasons for denial of the petition will be published. The reference numbers for the complaints to NHTSA cited by the petitioner can be found in the petition submission documents in the public file for DP22-003. To review those complaints and the additional complaints ODI added to its evaluation which are cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11000788A class settlement against Hyundai Motor America (HMA) that had alleged that certain 2011 2022 model year Hyundai vehicles that were not equipped with an engine immobilizer (called the Class Vehicles) contain design flaws, including the failure to manufacture the Class Vehicles with an anti-theft device called an engine immobilizer, that make them susceptible to theft and damage. Class Vehicles manufactured without an engine immobilizer have traditional turn-key-to-start ignition systems.
• 11000314A class settlement against Hyundai Motor America (HMA) that had alleged that certain 2011 2022 model year Hyundai vehicles that were not equipped with an engine immobilizer (called the Class Vehicles) contain design flaws, including the failure to manufacture the Class Vehicles with an anti-theft device called an engine immobilizer, that make them susceptible to theft and damage. Class Vehicles manufactured without an engine immobilizer have traditional turn-key-to-start ignition systems.
• 10251285This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
• 10251282Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. Campaign 9A8 has also been released to provide a revised software update to certain 2018 model year Elantra vehicles. For certain vehicles that cannot be upgraded with the software under Campaign 993, Hyundai is offering customers an anti-theft ignition cylinder protector to be installed on their vehicle. This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock anti-theft solutions available from HMA through Hyundai dealerships.
• 10251276This bulletin provides the service procedure to: 1) Upgrade the IBU/BCM (Integrated Body Control Unit/Body Control Module) to revise the OEM Hyundai burglar alarm system operation and ignition start logic and 2) Install two anti-theft decals for the front windows. Additional decals may also be installed in the rear windows at customers discretion.
• 10251275Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers an anti-theft ignition cylinder protector to be installed on their vehicle. This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock anti-theft solutions available from HMA through Hyundai dealers.
• 10249707Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10247611Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10247189This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
• 10245579Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10245578Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10244992Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10241874Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10241849Some models from service campaign 993 (IBU/BCM Software Update and Decals Application) equipped with the Hyundai OEM remote start system may exhibit the horn honking when remote starting the vehicle after receiving the software update. This bulletin provides the procedure to update the remote start module to eliminate the horn honking during remote start operation.
• 10240087This Service Information bulletin provides information on how to update the Apple Carplay software from Hyundais Navigation Updates page. The current version of Google Maps has 10 times the data transmission compared to the previous version. As a countermeasure, an update with a frame skip logic has been added to resolve the data congestion with Google Maps.
• 10240081Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32).
• 10240080Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10238353Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10237189Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
• 10235556Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10235555Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993) in response to an increase in thefts of certain Hyundai vehicles not equipped with engine immobilizers targeted through social media. In November 2021, engine immobilizers became standard on all Hyundai vehicles produced.
• 10235341Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10233549Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993) in response to an increase in thefts of certain Hyundai vehicles not equipped with engine immobilizers targeted through social media. In November 2021, engine immobilizers became standard on all Hyundai vehicles produced.
• 10233547Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10230907Certain 2018-2022MY Kona (OS) vehicles equipped with 2.0L engines and 4WD may exhibit transfer case oil leaks and/or an oil smell caused by the transfer case pinion oil seal overheating. This bulletin describes the procedure to update the 4WD electronic control module (ECU) and to inspect the transfer pinion area for leakage. If a leak is detected, the transfer case pinion oil seal will need to be replaced.
• 10230904This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
• 10217258Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
• 10217251Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
• 10215599Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10213724Hyundai is conducting a service campaign 974 to enhance the knock sensor logic with the Cylinder Noise Diagnostic System (CNDS) software update. CNDS is to detect abnormal cylinder wall scuffing or noise of the engine block before potentially severe engine damage occurs. If abnormal noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously. In addition, DTC P1327 will be recorded in the ECM.
• 10213721Certain vehicles (listed below) equipped with 7-speed Double Clutch Transmissions (DCT) may exhibit abnormal vibration at low speeds. This bulletin outlines the procedures for diagnosing clutch judder, updating the Transmission Control Unit (TCU) with revised logic, and/or replacing the Double Clutch.
• 10213718Hyundai is conducting a service campaign to enhance the knock sensor logic with the Cylinder Noise Diagnostic System (CNDS) software update. CNDS is to detect abnormal cylinder wall scuffing or noise of the engine block before potentially severe engine damage occurs. If abnormal noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously. In addition, DTC P1327 will be recorded in the ECM.
• 10211680Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10211678Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10203272Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing
• 10190044This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
• 10190038This bulletin provides best practice recommendations when performing brake service procedures.
• 10190035This bulletin describes the procedure to install a protection cover over the In-Cable Control Box (ICCB) to protect against drops, bumps, or shock.
• 10189989This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.

Every Hyundai Kona model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.