2020 Hyundai Kona

Recalls

2 recalls name the 2020 Hyundai Kona. Newest first.

• Engine

  Apr 28, 2021NHTSA 21V301000158,493 vehicles

  Hyundai Motor America (Hyundai) is recalling certain 2019-2020 Elantra, 2019-2021 Kona and Veloster vehicles equipped with 2.0L Nu MPI engines. The piston oil rings may not have been properly heat-treated, which could result in engine damage.

  Risk and remedy

  Risk

  A damaged engine may stall, increasing the risk of a crash. In addition, oil may leak onto hot exhaust components, increasing the risk of a fire.

  Remedy

  Dealers will inspect and, if necessary, replace the engine, free of charge. In addition, Hyundai will deploy Piston Ring Noise Sensing System (PNSS) software. Owner notification letters were mailed August 24, 2021. Owners may contact Hyundai customer service at 1-855-371-9460.

  Full recall details →

• Equipment › Other › Labels

  Jan 17, 2020NHTSA 20V022000477 vehicles

  Hyundai Motor America (Hyundai) is recalling certain 2020 Kona vehicles. The certification label may indicate incorrect Gross Axle Weight Rating (GAWR). As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) numbers 567, "Certification" and 110, "Tire Selection and Rims."

  Risk and remedy

  Risk

  An incorrect GAWR could result in the vehicle being overloaded, increasing the risk of a crash.

  Remedy

  Hyundai will notify owners, and dealers will install new label stickers displaying the correct GAWR over the affected areas of the certification label, free of charge. The recall began March 2, 2020. Owners may contact Hyundai customer service at 1-855-371-9460. Hyundai's number for this recall is 187.

  Full recall details →

Owner complaints

What owners report most

1. Engine109
2. Power train20
3. Unknown or other17
4. Electrical system11
5. Vehicle speed control7
6. Steering7
7. Forward collision avoidance7
8. Engine and engine cooling4
9. Fuel/propulsion system4
10. Service brakes3

Latest complaints

• Oct 22, 2026OH
  Engine

  My 2020 Kona 2.OL failed an oil test losing 2.5 quarts in 960 miles, stalled on the highway, and blows oil out the tailpipe. Hyundai (Case #43141313) is denying repair coverage because my VIN was excluded from Recall 21V301000. This recall needs to be expanded to include my VIN.

• Oct 13, 2026SC53,976 mi
  Engine
  The contact owns a 2020 Hyundai Kona. The contact stated that while driving at 35 MPH, the accelerator pedal was depressed, but the vehicle hesitated, and there was white smoke coming from the exhaust. The vehicle was towed to an independent mechanic, where the contact was advised to take the…

  The contact owns a 2020 Hyundai Kona. The contact stated that while driving at 35 MPH, the accelerator pedal was depressed, but the vehicle hesitated, and there was white smoke coming from the exhaust. The vehicle was towed to an independent mechanic, where the contact was advised to take the vehicle to a dealer. The dealer was made aware of the failure. The contact referenced an unknown recall; however, the VIN was not associated with a recall related to the failure. The manufacturer was made aware of the failure. The failure mileage was approximately 53,976.

• Sep 29, 2026AR
  Engine
  COMPONENT THAT FAILED: The engine short block piston rings (related to NHTSA recall 203) failed, causing severe cylinder wall scoring. The vehicle is currently located at an authorized Hyundai dealership and is available for manufacturer or NHTSA inspection. SAFETY RISK; The defective piston…

  COMPONENT THAT FAILED: The engine short block piston rings (related to NHTSA recall 203) failed, causing severe cylinder wall scoring. The vehicle is currently located at an authorized Hyundai dealership and is available for manufacturer or NHTSA inspection. SAFETY RISK; The defective piston rings caused severe internal oil consumption, resulting in hydraulic oil starvation. This creates a high risk of sudden engine stalling, catastrophic engine seizure, and complete loss of motive power while driving in traffic. CONFIRMATION AND INSPECTION: Yes, the defect has been confirmed. The current Hyundai dealership performed a boroscope inspection, which physically confirmed severe vertical metal scoring in cylinder 3. They also documented that the engine was 1.5q low on oil with zero external leaks, confirming internal consumption. Despite physical proof of the recall defect, the manufacturer is currently refusing to honor the recall repair. WARNING LAMPS/SYMPTOMS: The check engine light illuminated, logging exhaust camshaft timing correlation codes (P0017). This first April 2026 at 169,000 miles. This timing code is a secondary hydraulic symptom caused by the severe internal oil starvation originating from priary lower block cylinder scoring defect.

• Sep 27, 2026OH
  Engine
  I was fortunate to check my daughter's oil and noticed that it was almost empty. I alerted the dealer because I recently got an oil change and thought there was a leak, but no oil was on the driveway. The dealer performed an oil consumption test. They said it was 1 quart per 1,000 miles and this is…

  I was fortunate to check my daughter's oil and noticed that it was almost empty. I alerted the dealer because I recently got an oil change and thought there was a leak, but no oil was on the driveway. The dealer performed an oil consumption test. They said it was 1 quart per 1,000 miles and this is acceptable. There are other models that are on the recall list, but mine is not. The dealer and Hyundai said that they will not pay for repairs because it is out of warranty. The bigger issue here is that Hyundai is aware of this issue (oil burning fast in these vehicles) and they are not warning owners to check their oil. This is a cute car and it is driven by college age girls who do not think about checking oil. If the oil runs dry, the engine can seize up and the car will stop. This can cause an accident and possible fatality. I am very concerned about the safety of my daughter and others. I have 5 quarts of oil in my daughters trunk to top it off regularly. This information needs to be given to owners of these vehicles to increase awareness of the problem an prevent a tragedy.

• Sep 9, 2026OH
  Engine
  The contact owns a 2020 Hyundai Kona. The vehicle was taken to the dealer to be repaired under NHTSA Campaign Number: 21V301000 (Engine); however, the dealer was unable to perform the recall repair because the vehicle had not experienced a failure associated with the recall and there were no fault…

  The contact owns a 2020 Hyundai Kona. The vehicle was taken to the dealer to be repaired under NHTSA Campaign Number: 21V301000 (Engine); however, the dealer was unable to perform the recall repair because the vehicle had not experienced a failure associated with the recall and there were no fault codes displayed or retrieved associated with the recall. However, an independent mechanic recommended that the engine be replaced. The contact provided the dealer with the fault codes and the failures that the independent mechanic had found; however, the dealer was unable to retrieve the same fault codes. The contact stated that the check engine warning light was illuminated. The manufacturer was notified of the failure and agreed with the dealer and refused additional assistance. The vehicle was not repaired.

• Aug 31, 2026NC72,000 mi
  Engine
  The contact owns a 2020 Hyundai Kona. The contact stated that the vehicle was repaired under NHTSA Campaign Number: 21V301000 (Engine); however, the recall repair failed to prevent the failure from occurring. The contact stated that while driving at various speeds, the vehicle lost motive power and…

  The contact owns a 2020 Hyundai Kona. The contact stated that the vehicle was repaired under NHTSA Campaign Number: 21V301000 (Engine); however, the recall repair failed to prevent the failure from occurring. The contact stated that while driving at various speeds, the vehicle lost motive power and failed to restart using the ignition key. The vehicle was towed to a dealer, Capital Hyundai of Greensboro (801 E Bessemer Ave, Greensboro, NC 27405), where it remained for further diagnosis. The contact stated that during the prior recall repair, the Continuously Variable Valve Timing (CVVT) assembly, Engine Control Module (ECM), and Body Control Module (BCM) were replaced, a solenoid was installed, and the engine was inspected but not replaced. The manufacturer was notified of the failure, and a case was opened. The failure mileage was approximately 72,000.

• Aug 27, 2026MI
  Engine · Power train

  Leaking oil...burns exceptionally fast even with dealership services. Pistons not sealed, melts new spark plugs, misfire on cylinder 3

• Aug 25, 2026MD
  Engine
  My 2020 Hyundai Kona experienced an engine-related malfunction. An authorized Hyundai dealer inspected the vehicle, confirmed diagnostic code P1327, and determined that the complete engine required replacement. Hyundai authorized the replacement, and the vehicle remained out of service for…

  My 2020 Hyundai Kona experienced an engine-related malfunction. An authorized Hyundai dealer inspected the vehicle, confirmed diagnostic code P1327, and determined that the complete engine required replacement. Hyundai authorized the replacement, and the vehicle remained out of service for approximately two weeks. The engine defect created a safety concern because an engine malfunction could cause reduced or complete loss of motive power while driving, increasing the risk of a crash. The dealer inspected and removed the original engine; I do not know whether it remains available for further inspection, but the repair order and diagnostic records are available. I am filing this complaint so NHTSA can document this engine failure and determine whether it is related to NHTSA Campaign 21V301 / Hyundai Recall 203 and whether additional investigation or corrective action is warranted.

• Aug 8, 2026VA
  Engine
  I received the recall, brought the Kona in had the software download. Now the engine code indicates engine issues with the safety code. Hyundai customer service representatives stars because the issue wasn't found and the software download completed this doesn't fall under the recall. I do have an…

  I received the recall, brought the Kona in had the software download. Now the engine code indicates engine issues with the safety code. Hyundai customer service representatives stars because the issue wasn't found and the software download completed this doesn't fall under the recall. I do have an appointment to bring the Kona into the dealership but because Hyundai states it is no longer under the recall I am responsible for the towing and will not be remembursed. When I initially brought the vehicle in I was told if the pistons and engine codes appears under the recall layer on towing and replacement of the engine is covered. I was also told my engine covered up to 150,000 miles. Even through I only have 65,000 Hyndai dealer and customer service stated it is not as this is only if the engine showed signs at the time of the software download. This is absolutely wrong to be treated like this and been advised by my local mechanic this does appear to be part of the recall, will deregulate, or engine could seize up causing a safety issue.

• Aug 4, 2026TX
  Engine · Power train · Suspension
  I am filing a safety complaint against Scott Stark’s South Point Hyundai for selling me a vehicle with an active open safety recall, a blown transmission, an A/C failure, and a dry-rotted tire. Before returning the car for service under a promised 1,000-mile warranty, my sister, who has worked for…

  I am filing a safety complaint against Scott Stark’s South Point Hyundai for selling me a vehicle with an active open safety recall, a blown transmission, an A/C failure, and a dry-rotted tire. Before returning the car for service under a promised 1,000-mile warranty, my sister, who has worked for Corporate Hyundai for 15 years, helped me conduct a full intake baseline inspection at her dealership. We performed a recorded 360-degree video inspection, took high-resolution photos of every square inch, and ran full computer diagnostics, which confirmed zero tool marks on any bolts under the hood or on the transmission, and all diagnostic readings were perfectly recorded. South Point Hyundai kept my vehicle for 10 days for repairs, making excuses about test drives and failing to find technicians. However, a hidden GPS tracker tucked deep under my passenger side carpet meticulously documented every single time the vehicle moved or remained completely stationary on their lot. Upon picking up the vehicle, my sister scanned the car immediately with her diagnostic computer. The readings are now completely erratic and all over the place compared to the baseline corporate readings we documented 10 days prior. Physical inspection reveals that bolts have been turned, internal components have been actively tampered with, and parts have been structurally altered. The evidence directly indicates that this dealership used my personal vehicle as an unauthorized parts donor vehicle to harvest components, severely compromising its mechanical integrity, structural reliability, and overall road safety. This severe tampering has left the vehicle completely unsafe to operate. We possess full video evidence, high-resolution photographs, GPS tracking logs, and comparative corporate Hyundai diagnostic data verifying this severe mechanical fraud. I have turned this info over to Corporate Hyundai, the DMV, and federal enforcement agencies due to safety risks.

• Jul 3, 2026NJFire
  Engine

  The Kona was driven a 1/2 hour before parking the vehicle. The Kona was turned off. Within 5 minutes smoke began wafting from under the hood. When I opened the hood to inspect I found the engine & underside of the hood was engulfed in flames. I closed the hood immediately. The Kona fully ignited with minor explosions & burnt completely to the metal frame within 25 minutes.

• Jun 18, 2026NC
  Engine · Fuel/propulsion system

  The car failed to accelerate on highway on multiple occasions, including when slowing down and then trying to accelerate when pulling out on highways.

• May 28, 2026OH117,000 mi
  Engine
  The contact owns a 2020 Hyunndai Kona. The contact stated while attempting to start the vehicle, the check engine warning light illuminated. The contact's fiance, who is an independent mechanic attached the portable diagnostic tester to the vehicle, and the failure code was P1327. The dealer was…

  The contact owns a 2020 Hyunndai Kona. The contact stated while attempting to start the vehicle, the check engine warning light illuminated. The contact's fiance, who is an independent mechanic attached the portable diagnostic tester to the vehicle, and the failure code was P1327. The dealer was made aware of the failure but provided no assistance. The contact was informed that the repair was not covered under warranty. The contact referenced an unknown recall; however, the VIN was not associated with a recall related to the failure. The manufacturer was made aware of the failure and a case was filed. The contact as advised to take the vehicle to the dealer for diagnostic testing. The failure mileage was approximately 117,000.

• May 27, 2026OR
  Service brakes
  I am receiving an intermittent "check regenerative brake" message. The message will clear automatically and then reappear every three to four weeks. An internet search reveals this is a common error for the Kona. Most people report no repair by the dealer. In several cases, the brakes stopped…

  I am receiving an intermittent "check regenerative brake" message. The message will clear automatically and then reappear every three to four weeks. An internet search reveals this is a common error for the Kona. Most people report no repair by the dealer. In several cases, the brakes stopped working, resulting in collisions. The hydraulic breaks do not work if the regenerative brake system fails leaving you with no way to stop the car. The manufacture has no solution.

• May 15, 2026WA
  Structure › Body
  2020 Hyundai Kona, ~36,300 miles. Driver's side door latch assembly. On or around May 9, 2026, an abnormal mechanical noise began coming from inside the driver's door whenever the key fob lock/unlock button was pressed, consistent with a failing latch actuator. I booked a service appointment, and…

  2020 Hyundai Kona, ~36,300 miles. Driver's side door latch assembly. On or around May 9, 2026, an abnormal mechanical noise began coming from inside the driver's door whenever the key fob lock/unlock button was pressed, consistent with a failing latch actuator. I booked a service appointment, and on May 15, 2026, an authorized Hyundai dealership confirmed the defect and recommended full replacement of the driver's door latch assembly. The vehicle is available for inspection. A latch that does not reliably operate is a serious safety risk. The driver's door is the primary egress point. An intermittent or inoperative latch could prevent emergency exit, block post-collision egress, or prevent first-responder access. The vehicle regularly transports children, increasing the consequence of any failure. No dashboard warning lights, alerts, or messages preceded the failure. This is a mechanical defect that does not trigger electronic warnings. Hyundai TSB 21-BD-006H (May 2021) acknowledges this exact failure mode — door handle inoperative or requiring repeated attempts to open — on the Elantra (AD/ADa) and Tucson (TL). The remedy is full latch assembly replacement, and Hyundai extended warranty coverage on the latch to 10 years / unlimited miles on those models. The 2020 Kona is not named in 21-BD-006H despite exhibiting the identical failure mode at low mileage on a 6-year-old vehicle. The defect appears to extend to the Kona platform and is not currently covered. Vehicle has not been inspected by Hyundai corporate, police, insurance, or independent shops. Filing this complaint to record the cross-platform defect pattern and request that NHTSA evaluate whether the door latch warranty extension should be expanded to include the Kona.

• May 12, 2026PA
  Engine · Vehicle speed control
  The vehicle all shut off as I slowed down for a stop sign. Put in Park turn the key off restarted it got to the next stop sign same thing. Also the red light same had to shut it off put it in put in Park shut off and then restart and step on the gas so I can get through before a car hit me.…

  The vehicle all shut off as I slowed down for a stop sign. Put in Park turn the key off restarted it got to the next stop sign same thing. Also the red light same had to shut it off put it in put in Park shut off and then restart and step on the gas so I can get through before a car hit me. Happened several times till I finally got the car home done it started knocking loudly and shut off just as I got into my driveway. Check the oil. The oil is fine. Occasionally the oil light would come on if you put in Dr.. It is knocking really loud. The engine light keeps flashing constantly. I called Brown Dobb Hyundai in Easton Pennsylvania. They told me this recall has nothing to do with my car because of the VIN number. But everything that is happening to it is is under recall 187. But because of the VIN number they are insisting it’s not my car. What can I do before I get in an accident? I don’t have any other cars to rely on. I have a son with Autism and I am a single mother. What else can I do? I had this car not even three months.

• May 11, 2026PA
  Engine

  Engine light comes on starts flashing as well as the oil light occasionally. If you slow down or have to stop it completely shuts down you have to put in park and restart the car to get anywhere and start stopping in front in the middle of traffic. So if you slow down to go up a hill or anything, it just stops completely. Also making a clicking or grinding sound not sure.

• Apr 25, 2026RICrash1 injury
  Service brakes · Vehicle speed control

  I stopped my car foot on brake put it in park and it accelerated on its own and forced me to crash into a concrete wall still not wanting to stop

• Apr 17, 2026WI
  Engine
  On February 27, 2026, my 2020 Hyundai Kona (Recall 203) suffered a catastrophic engine stall while driving, requiring an emergency tow. The dealership (Rosen Hyundai) and Hyundai Motor America are refusing to perform the Safety Recall 203 remedy unless I first pay $4,715.26 for a timing repair. I…

  On February 27, 2026, my 2020 Hyundai Kona (Recall 203) suffered a catastrophic engine stall while driving, requiring an emergency tow. The dealership (Rosen Hyundai) and Hyundai Motor America are refusing to perform the Safety Recall 203 remedy unless I first pay $4,715.26 for a timing repair. I was also required to pay $453.05 for wiring repairs just to "enable" the recall test, yet the recall remains unaddressed because of a financial paywall. I am reporting an obstruction of a federal safety recall by the manufacturer.

• Apr 10, 2026CA146,000 mi
  Power train
  The contact owns a 2020 Hyundai Kona. The contact stated that during a regular maintenance visit, the contact was informed that there was a leak coming from the front axle transfer case, which was initially unrepaired. The vehicle was subsequently taken to a dealer in Colorado, where the seal was…

  The contact owns a 2020 Hyundai Kona. The contact stated that during a regular maintenance visit, the contact was informed that there was a leak coming from the front axle transfer case, which was initially unrepaired. The vehicle was subsequently taken to a dealer in Colorado, where the seal was replaced. However, while an oil change service was being performed later, it was discovered that the failure recurred because the previous repair was performed incorrectly. The first failure was for an inoperable seal, and the second failure was due to an improper repair. The third inspection confirmed that the seal had not been installed correctly during the prior service. The dealer was notified of the failure. The vehicle was not repaired. The manufacturer was notified of the failure. The failure mileage was 146,000.

• Apr 6, 2026NY
  Engine · Unknown or other

  Basically normal driving the car stalled. It slowed to a stall. I had to restart the car. This has happened a couple to times.

• Apr 1, 2026NYFire
  Unknown or other
  On 3/29/26 my Kona caught fire while parked in the front left side of the engine and burned completely within eight minutes. This is not an electric car. Prior to that I drove the car all day with no incident. It was later in the evening around 5:40 PM. I had driven from my house to a restaurant…

  On 3/29/26 my Kona caught fire while parked in the front left side of the engine and burned completely within eight minutes. This is not an electric car. Prior to that I drove the car all day with no incident. It was later in the evening around 5:40 PM. I had driven from my house to a restaurant which is about 6.8 miles from my house. I parked my car and then my son-in-law noticed that my engine was smoking. My husband went to check to see if it was the radiator, but he noticed that it was fire and we called [XXX] . I know there are no recalls for my car, but I wanted to report it to you. The car only had 44,900 miles on it and was only serviced by West Nyack Hyundai. The last service was on 1/19/26. If you have any questions, you can email me at [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

• Mar 25, 2026NC
  Engine
  My car was taken in as a part of recall bulletin 203 for improperly heated piston rings treated pistons rings that result in premature engine failure and possible fire on 12/5/25. The knock sensor test was performed and the KSDS software was installed. On 3/12/26 my daughter who was on the way…

  My car was taken in as a part of recall bulletin 203 for improperly heated piston rings treated pistons rings that result in premature engine failure and possible fire on 12/5/25. The knock sensor test was performed and the KSDS software was installed. On 3/12/26 my daughter who was on the way home from a trip called because her checking engine light started flashing and the engine was knocking. We had it towed to Hyundai and they are denying service under the recall stating improper codes yet one of the codes is P1327 KSDS detection which is related to the rod bearing failure the car currently has. They are trying to make me pay $4600 out of pocket plus the tow bill when this is directly related to the recall.

• Mar 19, 2026CA
  Engine · Power train · Steering
  My 2020 Hyundai Kona (VIN: [XXX] ) has a persistent engine stalling safety defect that matches Recall 203 (22-01-042H, NHTSA Campaign 21V301000 – Nu 2.0L Atkinson Engine Inspection and Replacement). The recall addresses improperly heat-treated piston oil rings causing cylinder bore scuffing…

  My 2020 Hyundai Kona (VIN: [XXX] ) has a persistent engine stalling safety defect that matches Recall 203 (22-01-042H, NHTSA Campaign 21V301000 – Nu 2.0L Atkinson Engine Inspection and Replacement). The recall addresses improperly heat-treated piston oil rings causing cylinder bore scuffing, accelerated oil consumption, abnormal knocking, and potential engine stall while driving (increasing crash/fire risk).I first brought the vehicle to Corona Hyundai for repeated stalling while driving. They performed the recall vibration inspection and software update (Campaign 974), stated the test passed, and declared the vehicle "fixed", safe and "good-to-go" Immediately after pickup, the stalling returned worse: approximately 60-80 miles later on XX near the XXX exit (four-lane high-speed highway), the engine completely stalled at 65 mph while merging for an exit. This caused vehicles and semi-trucks behind me to swerve dangerously and very nearly collide with me. The vehicle stalled four more times on the way to my destination in [XXX] .I then took it to the nearest dealer, Carlsbad Hyundai for safety reasons. They performed the vibration inspection again, which also "passed," yet the real-world symptoms would continue unchanged: accelerated oil consumption (I monitor the dipstick and refill regularly), sputtering, knocking noises, and complete engine stalls (dozens of incidents, especially on local roads and turns). The vehicle remains undrivable due to imminent stall risk while moving and putting myself, my passengers and other commuters at high risk of severe injury or death.Both dealers and Hyundai Customer Care (Case #XXX) have refused further action, stating the vibration test passed, they cannot duplicate the concern, and no additional claim can be submitted for engine replacement. Hyundai's TSB [XXX] requires only the vibration inspection; engine replacement is authorized if "NO PASS" – no separate oil consumption test or monitored drive INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.

• Mar 11, 2026SC108,000 mi
  Engine
  The contact owns a 2020 Hyundai Kona. While the contact’s son was driving the vehicle on the highway at an undisclosed speed, there was a knocking sound coming from the engine and the vehicle failed to stop as intended. The gear shifter was shifted into neutral(N) and restarted; however, the engine…

  The contact owns a 2020 Hyundai Kona. While the contact’s son was driving the vehicle on the highway at an undisclosed speed, there was a knocking sound coming from the engine and the vehicle failed to stop as intended. The gear shifter was shifted into neutral(N) and restarted; however, the engine failed shortly afterwards, and the vehicle was unable to restart. No warning lights were illuminated. The vehicle was towed to an independent mechanic, where it was diagnosed with piston rings failure and low engine oil. The vehicle was not repaired. The manufacturer was notified of the failure, where it was confirmed that the VIN was included in NHTSA Campaign Number: 21V301000 (Engine); however, the recall repair was already performed. The approximate failure mileage was 108,000.

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Pedestrian alert sounds

  DP22005Opened Jan 27, 2023Closed Aug 7, 2023Recall 22V063000
  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for…

  NHTSA received a petition on or about July 18, 2022, requesting that Federal Motor Vehicle Safety Standard (FMVSS) 141 be applied to all electric and hybrid vehicles operating in the United States. The petition can be reviewed at NHTSA.gov under ODI Number 11486072. FMVSS 141 establishes performance requirements for pedestrian alert sounds for motor vehicles. The standard applies to hybrid and electric vehicles that have a gross vehicle weight rating of 4,536 KG or less or are defined as low-speed vehicles. The standard became fully applicable to all such vehicles manufactured on or after March 1, 2021.On January 27, 2023, NHTSA opened Defect Petition (DP) 22-005 to evaluate the subject matter described in the petition. On June 24, 2023 and as supplemented on June 25, 2023, the petitioner notified NHTSA he was withdrawing his petition. The petitioner indicated that, based on his review of data, there is no justification for asserting potential benefits that could be derived from actions sought by my petition. Based on the petitioner's withdrawal, DP22-005 is closed. Closure of this DP does not represent a determination by NHTSA regarding the subject matter of the petition.

• Loss of Motive Power

  DP22003Opened Sep 12, 2022Closed Dec 12, 2023
  The National Highway Traffic Safety Administration (NHTSA) received a letter dated July 13, 2022, petitioning the Agency to initiate a safety defect investigation into loss of motive power allegations attributed to oil drain pan assembly failures on certain Hyundai Motor America, Inc. and Kia America, Inc. vehicles…

  The National Highway Traffic Safety Administration (NHTSA) received a letter dated July 13, 2022, petitioning the Agency to initiate a safety defect investigation into loss of motive power allegations attributed to oil drain pan assembly failures on certain Hyundai Motor America, Inc. and Kia America, Inc. vehicles spanning Model Years (MY) 2005-2021. The Petitioners cited examples of complaints indicating that the subject vehicles were experiencing rapid loss of engine oil due to oil drain plug back outs, resulting in loss of motive power and/or catastrophic engine damage. Additional complaints were provided which alleged that the oil drain pans lack sufficient structural integrity and are susceptible to cracking. The petition itself can be reviewed at NHTSA.gov under ODI number 11481745. On September 12, 2022, the Office of Defects Investigation (ODI) opened Defect Petition (DP22-003) to evaluate the Petitioners’ request. The Petitioners have provided additional complaints within four supplemental letters dated January 31, 2023, March 21, 2023, May 23, 2023, and August 4, 2023. ODI’s evaluation included the review and analysis of the complaints and supporting information submitted by the Petitioners, as well as additional complaints submitted directly to NHTSA which referenced either the oil drain plug or a crack in the oil pan. After reviewing the available data, ODI has not identified evidence that would support opening a defect investigation into the oil drain pan assemblies of the subject vehicles. Based on a review of the available information, a loss of motive power resulting from an oil drain plug back out has not occurred between the initial sale of a vehicle and the completion of its first oil change. If during an oil change service, a technician fails to remove the existing drain plug gasket before installing a new gasket, it is likely that a proper seal between the drain plug and the oil pan will not be made. An improper seal between the drain plug and oil pan could lead to the backing out on the drain plug, resulting in the sudden loss of oil while driving. Additionally, the provided examples of oil pan cracks were localized to the immediate vicinity of the oil drain plug and/or appeared to be the result of direct-contact with a tool during servicing.  There is no information to support that a vehicle-based defect exists relating to the oil pan assembly, and instead the documented incidents are related to the failure to follow the proper maintenance procedures during oil change service. In October 2023, Hyundai published a Technical Service Bulletin (TSB) that provided detailed instructions for oil change service on its gasoline powered vehicles, specifically highlighting the need to remove and replace the existing drain plug gasket prior to reinstalling the drain plug. After a thorough review of the material submitted by the petitioner, the information already in NHTSA's possession, and the potential risks to motor vehicle safety implicated by the petitioners' allegations, NHTSA does not believe that a formal investigation is warranted. Therefore, the petition is denied. A Federal Register Notice (FRN) further detailing NHTSA’s reasons for denial of the petition will be published. The reference numbers for the complaints to NHTSA cited by the petitioner can be found in the petition submission documents in the public file for DP22-003. To review those complaints and the additional complaints ODI added to its evaluation which are cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11000788A class settlement against Hyundai Motor America (HMA) that had alleged that certain 2011 2022 model year Hyundai vehicles that were not equipped with an engine immobilizer (called the Class Vehicles) contain design flaws, including the failure to manufacture the Class Vehicles with an anti-theft device called an engine immobilizer, that make them susceptible to theft and damage. Class Vehicles manufactured without an engine immobilizer have traditional turn-key-to-start ignition systems.
• 11000314A class settlement against Hyundai Motor America (HMA) that had alleged that certain 2011 2022 model year Hyundai vehicles that were not equipped with an engine immobilizer (called the Class Vehicles) contain design flaws, including the failure to manufacture the Class Vehicles with an anti-theft device called an engine immobilizer, that make them susceptible to theft and damage. Class Vehicles manufactured without an engine immobilizer have traditional turn-key-to-start ignition systems.
• 10251285This bulletin contains information about the proper removal of the windshield wiper blade protective cover on all models. If the protective cover is not removed correctly, there is a possibility of the rubber insert and rail spring becoming partially separated on the inner side of the wiper blade, which could lead to poor wiping performance and/or possible scratching of the windshield glass. Follow the procedure in this bulletin to properly remove the windshield wiper blade protective cover on all new wiper blades.
• 10251282Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. Campaign 9A8 has also been released to provide a revised software update to certain 2018 model year Elantra vehicles. For certain vehicles that cannot be upgraded with the software under Campaign 993, Hyundai is offering customers an anti-theft ignition cylinder protector to be installed on their vehicle. This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock anti-theft solutions available from HMA through Hyundai dealerships.
• 10251276This bulletin provides the service procedure to: 1) Upgrade the IBU/BCM (Integrated Body Control Unit/Body Control Module) to revise the OEM Hyundai burglar alarm system operation and ignition start logic and 2) Install two anti-theft decals for the front windows. Additional decals may also be installed in the rear windows at customers discretion.
• 10251275Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers an anti-theft ignition cylinder protector to be installed on their vehicle. This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock anti-theft solutions available from HMA through Hyundai dealers.
• 10249707Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10247611Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), and anti-theft ignition cylinder protector campaign (Campaign 9A5) in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be upgraded with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10247189This bulletin provides important checkpoint guidelines when performing engine oil and filter change services.
• 10245579Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10245578Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10244992Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10241874Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32). This Dealer Best Practices Guide provides information to assist dealership personnel with customer questions relating to the immobilizer software upgrade, window decals and steering wheel lock ant-theft solutions available from HMA through Hyundai dealers.
• 10241849Some models from service campaign 993 (IBU/BCM Software Update and Decals Application) equipped with the Hyundai OEM remote start system may exhibit the horn honking when remote starting the vehicle after receiving the software update. This bulletin provides the procedure to update the remote start module to eliminate the horn honking during remote start operation.
• 10240087This Service Information bulletin provides information on how to update the Apple Carplay software from Hyundais Navigation Updates page. The current version of Google Maps has 10 times the data transmission compared to the previous version. As a countermeasure, an update with a frame skip logic has been added to resolve the data congestion with Google Maps.
• 10240081Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993), combined with an anti-theft steering wheel lock campaign (Campaign P32), in response to an increase in thefts of certain 2011-2022MY Hyundai vehicles not equipped with engine immobilizers targeted through social media. For certain vehicles that cannot be updated with the software (Campaign 993), Hyundai is offering customers steering wheel locks at the dealer (Campaign P32).
• 10240080Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10238353Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10237189Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10235566Hyundai applies a Paint Protection Film (PPF) on new vehicles before delivery to dealerships. It provides a barrier between the paint and contaminants, such as rail dust, acid rain, and industrial fallout. In rare cases, the paint can become clouded under the PPF. These spots are the result of moisture trapped between the PPF and the paint.
• 10235556Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10235555Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993) in response to an increase in thefts of certain Hyundai vehicles not equipped with engine immobilizers targeted through social media. In November 2021, engine immobilizers became standard on all Hyundai vehicles produced.
• 10235341Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10233549Hyundai has launched an anti-theft software upgrade and window decal campaign (Campaign 993) in response to an increase in thefts of certain Hyundai vehicles not equipped with engine immobilizers targeted through social media. In November 2021, engine immobilizers became standard on all Hyundai vehicles produced.
• 10233547Certain Hyundai vehicles may not be equipped with an immobilizer. This bulletin provides the service procedure to update the IBU/BCM (Integrated Body Control Unit/Body Control Module), to revise the OEM Hyundai burglar alarm system operation and ignition start logic, and installation of two anti-theft decals for the front windows.
• 10230907Certain 2018-2022MY Kona (OS) vehicles equipped with 2.0L engines and 4WD may exhibit transfer case oil leaks and/or an oil smell caused by the transfer case pinion oil seal overheating. This bulletin describes the procedure to update the 4WD electronic control module (ECU) and to inspect the transfer pinion area for leakage. If a leak is detected, the transfer case pinion oil seal will need to be replaced.
• 10230904This bulletin provides information regarding condensation related to the accumulated moisture in the headlamp, rear combination lamp, daytime running lamp (DRL), or fog lamp. This TSB illustrates the various causes of condensation inside the lamp assembly. Lamp assembly replacement is NOT necessary in most cases. This condition can be eliminated by turning on the lamps with the engine running for several minutes or during normal driving operation.
• 10217258Effective June 2, 2008, Federal Motor Vehicle Safety Standard 110 (FMVSS 110) established a threshold for correcting load carrying capacity information indicated on tire placards when vehicle weight has been increased before retail sale. This limit is the lesser of 1.5% of GVWR or 100 pounds. If the total added weight exceeds the lesser of the limit, a label must be added to the driver-side B-pillar within 25mm (1 inch) of the original tire placard.
• 10217251Follow the guidelines outlined in this bulletin to inspect and clean or replace certain components of the engine intake system accordingly during engine short block or sub-assembly replacement.
• 10215599Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10213724Hyundai is conducting a service campaign 974 to enhance the knock sensor logic with the Cylinder Noise Diagnostic System (CNDS) software update. CNDS is to detect abnormal cylinder wall scuffing or noise of the engine block before potentially severe engine damage occurs. If abnormal noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously. In addition, DTC P1327 will be recorded in the ECM.
• 10213721Certain vehicles (listed below) equipped with 7-speed Double Clutch Transmissions (DCT) may exhibit abnormal vibration at low speeds. This bulletin outlines the procedures for diagnosing clutch judder, updating the Transmission Control Unit (TCU) with revised logic, and/or replacing the Double Clutch.
• 10213718Hyundai is conducting a service campaign to enhance the knock sensor logic with the Cylinder Noise Diagnostic System (CNDS) software update. CNDS is to detect abnormal cylinder wall scuffing or noise of the engine block before potentially severe engine damage occurs. If abnormal noise is detected, the Malfunction Indicator Lamp (MIL) will blink continuously. In addition, DTC P1327 will be recorded in the ECM.
• 10211680Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10211678Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing.
• 10203272Certain vehicles may develop a bearing noise within the Motor Driven Power Steering (MDPS) column worm shaft assembly. If bearing noise is heard, follow the procedure in this bulletin to replace the worm shaft bearing
• 10190044This bulletin provides the service procedure for engine connecting rod bearing clearance testing. Perform the procedure outlined in this bulletin to fulfill the Bearing Clearance Test inspection requirements to determine next required steps.
• 10190038This bulletin provides best practice recommendations when performing brake service procedures.
• 10189991When using Wireless CarPlay, the system may intermittently auto disconnect. When Wireless CarPlay is disconnected, a pop up message Phone Not Responding. Please reconnect it and try again will appear on the radio screen.
• 10189989This bulletin provides the inspection procedure and repair guidelines for certain vehicles listed below.

Every Hyundai Kona model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.