2023 International HV
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › International › HV › 2023
These records cover every 2023 International HV. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
11 recalls name the 2023 International HV. Newest first.
International Motors, LLC (International) is recalling certain 2021-2024 Lonestar, 2021-2025 RH, HV, MV, LT, HX, and 2022 PROSTAR vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working.
Risk and remedy
Risk
Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may have diminished or lost functionality, increasing the risk of a crash.
Remedy
International will work with Bendix to reprogram the ECU software, free of charge. Owner notification letters were mailed December 16, 2024. Owners may contact International customer service at 1-800-448-7825. International's number for this recall is 24515.
Navistar, Inc. (Navistar) is recalling certain 2023 International MV and International HV vehicles. The driveshafts can break under certain loading conditions.
Risk and remedy
Risk
A broken driveshaft can separate and cause a loss of drive power, increasing the risk of a crash.
Remedy
Dealers will replace the driveshafts, free of charge. Owner notification letters are expected to be mailed October 16, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23520.
Navistar, Inc. (Navistar) is recalling certain 2021-2024 International HV, HX, LoneStar, LT, MV, eMV, and RH trucks, and IC Bus CE, 2021-2023 IC Bus RE, and 2022-2023 IC Bus TC Commercial Buses. The anti-lock brake system (ABS) indicator light does not remain illuminated when a malfunction exists, and when the vehicle's ignition switch is on, and the…
Risk and remedy
Risk
An ABS indicator light that fails to remain illuminated will not alert the driver of an ABS malfunction, which could increase the risk of a crash.
Remedy
Towing variant vehicles under this campaign will not be repaired under recall 24V-8918. Dealers will update the software, free of charge. Owner notification letters are expected to be mailed July 24, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23515.
Navistar, Inc. (Navistar) is recalling certain 2023 International HV, HX, LT, RH, and Lonestar vehicles. The Intellipark Tractor Park Valve Module (PVM) may intermittently become stuck in the un-parked position and fail to move into the park position when the park switch is activated.
Risk and remedy
Risk
A PVM that fails to move into park can cause a vehicle rollaway, increasing the risk of a crash.
Remedy
Bendix will replace the Intellipark PVM. Owner notification letters were mailed November 3, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23508.
Navistar, Inc. (Navistar) is recalling certain 2023 International HV and 2023-2024 International MV vehicles. The rear axle spring wedge shim may have been incorrectly installed, which can cause U-joint failure and result in driveshaft separation.
Risk and remedy
Risk
Driveshaft separation can cause a loss of drive power and increase the risk of a crash.
Remedy
Dealers will reinstall the rear axle wedge shim, free of charge. Owner notification letters were mailed April 28, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23505.
Navistar, Inc. (Navistar) is recalling certain 2023 International HV and 2023-2024 International MV vehicles. The assembly bolts used to attach the battery box to the mounting bracket may be loose or missing.
Risk and remedy
Risk
Loose or missing bolts can allow the battery box to detach from the vehicle and become a road hazard, increasing the risk of a crash.
Remedy
Dealers will replace and tighten all four bolts, as necessary, free of charge. Owner notification letters were mailed April 28, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23506.
Navistar, Inc. (Navistar) is recalling certain 2022-2024 International HV, International MV trucks, and 2022-2023 IC Bus TC commercial buses. When the parking brake is applied, the automatic transmission is still in drive or reverse position, and the stationary power take-off (PTO) switch is engaged by the operator, the engine may rev and overcome the…
Risk and remedy
Risk
Unexpected vehicle movement can increase the risk of a crash or injury.
Remedy
Dealers will update the Cummins ECM software, free of charge. Owner notification letters are expected to be mailed April 24, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23504. This recall expands previous NHTSA recall number 20V-810.
Navistar, Inc. (Navistar) is recalling certain 2021-2022 International CV, 2022-2023 International HV, 2023 IC 1300 FBC, CE, RE, TC, International MV, HX, LT, RH, and LoneStar vehicles. The hex flange lock nuts, used in the suspension and steering joints, were improperly heat treated and may lose tension over time.
Risk and remedy
Risk
A loss of tension in the steering and suspension joints may lead to steering instability and increase the risk of a crash.
Remedy
Dealers will replace the hex flange lock nuts as necessary, free of charge. Owner notification letters are expected to be mailed January 20, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 22524.
Navistar, Inc. (Navistar) is recalling certain 2023 International LT, International Lonestar, International MV, International HV, International HX, and IC Bus TC Commercial buses. The engine control module (ECM) may experience an internal electrical short-circuit, causing the engine to stall.
Risk and remedy
Risk
An unexpected engine stall can increase the risk of a crash.
Remedy
Cummins will replace the ECM. Owner notification letters were mailed September 26, 2022. Owners may contact Navistar customer service at 1-800-448-7825.
Navistar, Inc. (Navistar) is recalling certain 2022-2023 International HX, HV, LoneStar, LT, MV, RH, IC TC Commercial Bus, and 2022 International WorkStar vehicles. The steering gears may have been assembled incorrectly, which can cause the gear to fracture.
Risk and remedy
Risk
A fractured steering gear can cause a loss of steering control, increasing the risk of a crash.
Remedy
Dealers will inspect the steering gear serial numbers, and replace the steering gears as necessary, free of charge. Interim owner notification letters were mailed August 18, 2022. Remedy parts are expected to become available in mid-October 2022. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 22513.
Navistar, Inc. (Navistar) is recalling certain 2022-2023 International MV, International HV, and 2022 IC RE commercial buses built without a forward radar unit. The warning label notifying the driver that the collision mitigation system is inoperative may be missing.
Risk and remedy
Risk
Failure to warn the driver that the collision mitigation system is inoperative increases the risk of a crash.
Remedy
Navistar will provide a warning label and installation instructions, free of charge. Owner notification letters were mailed June 14, 2022. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 22508.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010428This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean.
- 11006681This document will guide the user through installing the upper mounting hardware in place of the missing C-Loop and/or look down mirrors.
- 11005536The purpose of this document is to guide a user to resolve fault code 285 & 286 for Cummins engines.
- 11002889This document will provide the user with cleaning options and procedures for aluminum bright work parts that become stained or tarnished.
- 11002836The Exhaust Gas Sensor In-Use Monitor Performance Ratio (IUMPR) may operate below the prescribed standard.
- 10253986This document will guide the user to inspect oil pan for any sign of damage that could potentially be created by the front axle set screw
- 10253979This document is to guide users to eliminate brake pedal rattle noise.
- 10253970This document details the procedure that must be followed to ensure proper alternator troubleshooting.
- 10251415Cummins ISB Starting system diagnostics.
- 10251414Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine.
- 10249783A26 & S13 Fuel Gelling
- 10246233Tire Pressure Monitoring system; Feature Codes 16VLS, 16VUY, 16VVA, 16VVM, or 16VUZ
- 10246231J1939 Data Link Source Address Information
- 10244931Endurant Plumbing Retrofit; only models built with endurant transmission built before 11/01/2023
- 10244926Rebuilding Cylinder Heads on Certain MaxxForce 11/13, N13, and A26 engines; 2010 to present.
- 10244924A26 and S13 Fuel Gelling; only vehicles equipped with International A26 or S13 engines
- 10243610How to request a horsepower quote; all International and Cummins engines
- 10243602HV Enhanced transfer case cooling up-fit
- 10243601Cummins B6.7 Grid Heater Relay
- 10243596General Wheel Speed Sensor Troubleshooting
- 10243595Diagnosis of chassis wander complaints.
- 10241556Starter kicks out after 1 second on MV and HV with Cummins L9 Engines
- 10241555J1939 Data Link Source Address Information
- 10241554J1939 Data Link Troubleshooting
- 10240193Snap-On torque wrench requirement for all big bore engine connecting rod bolts; A26, MaxxForce 13, N13 engines
- 10237479N2 telematics module not communicating with OCC systems. Only models built with feature codes 10ADT, 10AEY, 10AEU, 10AEZ, 10AGB, or 10AGC built from 04/04/2019 through 11/01/2022.
- 10237470Cummins B6.7 and L9 engines with codes 285 and 286
- 10237468New air compressor incorporates an oil feed dowel O-ring. Only models equipped with 2010 and newer MaxxForce 11/13 engines, all N13, and A26 engines
- 10237465HV Exhaust Side Step Heat Shield Latching Area Cracking
- 10237456Certain HV 4X4 series trucks built with two-piece driveline may experience vibration when driving at highway speed.
- 10236043Tire Pressure Monitoring systems (TPMS); Only LT, RH, HV, HX, or MV series trucks with feature code 16VLS, 16VUY, 16VVA,16VUZ, or 16VVM
- 10236042New Air compressor Incorporates an oil feed dowel O-ring; only models built with MaxxForce 11/13, N13, or A26 Engines
- 10234021Rebuilding cylinder heads on certain EPA 2010 MaxxForce 11/13, N13, and A26 Engines
- 10234015Cummins Programming guide and fault codes285 & 265; only vehicles built with Cummins B6.7, X15, or L9 engines
- 10234007Telematics installation guidelines - Only units with 500K data link
- 10234000Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI engines or Cummins ISB engine with Allison transmissions
- 10233985Certain HV, LT, and RH Series trucks may have incorrect idle shutdown programmable parameters. Updating the programmable parameters will address this concern.
- 10233982Certain HV, HX, LT, and RH Series trucks may have incorrect idle shutdown programmable parameters. Updating the programmable parameters will address this concern.
- 10232617Installation of the 7104674C92 Engine Sensor Harness on 2021 and Newer International A26B engines.
- 10232616Rebuilding Cylinder Heads on Certain International MaxxForce 11/13 engines and all International N13 and A26 engines
Every International HV model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.