2019 International HV
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › International › HV › 2019
These records cover every 2019 International HV. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
11 recalls name the 2019 International HV. Newest first.
Navistar, Inc. (Navistar) is recalling certain 2018-2021 International HV, 2019-2021 International RH, 2019-2022 International MV, and 2022 International HX vehicles. A software error in the Body Control Module (BCM) may allow the vehicle to overcome the park brake during power-take-off (PTO) operation.
Risk and remedy
Risk
A parking brake that does not hold can allow the vehicle to move unexpectedly and increase the risk of a crash or injury.
Remedy
Dealers will update the BCM software, free of charge. Owner notification letters are expected to be mailed April 24, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23503.
Navistar, Inc. (Navistar) is recalling certain 2018-2021 International HV, 2018-2020 International HX, 2018-2021 International LT and International RH vehicles. The connecting rod wrist pin may crack, resulting in connecting rod failure.
Risk and remedy
Risk
Connecting rod failure can cause an engine shutdown, increasing the risk of a crash.
Remedy
Dealers will install new knock detection software to warn the driver prior to engine connecting rod failure, and replace connecting rods as necessary, free of charge. Owner notification letters were mailed February 24, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 22518.
Navistar, Inc. (Navistar) is recalling certain 2018-2019 International WorkStar, International DuraStar, 2019-2021 International HV, International MV, and IC Bus RE Commercial Bus vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Risk and remedy
Risk
A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy
Dealers will inspect the rail threads, and replace the rail as necessary, free of charge. Owner notification letters were mailed on June 21, 2021. Owners may contact Navistar customer service at 1-800-448-7825.
Navistar, Inc. (Navistar) is recalling certain 2019 International WorkStar and International HV vehicles equipped with Meritor MX-14-120 EVO steer axles. The axles may have insufficient lubrication, which may result in damage to the wheel end bearings.
Risk and remedy
Risk
If the bearings are damaged, the wheel may separate and cause a sudden loss of vehicle control, increasing the risk of crash.
Remedy
Navistar will notify owners, and dealers will inspect the steer axle wheel hubs for proper fluid level and repair any damaged wheel end components and spindles, as necessary, free of charge. The recall began May 1, 2020. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 20503.
Navistar, Inc. (Navistar) is recalling certain 2017-2020 International WorkStar and International DuraStar, 2018-2019 IC 1300 FBC Commercial and IC HC Commercial, 2018-2021 IC CE Commercial, International MV and International HV, and 2019-2021 IC TC Commercial buses with Cummins B6.7 diesel engines with a fuel module option number FS90301 or FS90453. The…
Risk and remedy
Risk
A fire increases the risk of injury. An engine stall can increase the risk of a crash.
Remedy
Cummins will notify the affected Navistar customers and dealers will disable the fuel heater by either installing a plug in place of the heater or otherwise rendering the fuel heater inoperable and removing the fuse supplying electrical power to the fuel heater and installing a cover over the wire harness connector, free of charge. The recall began May 28, 2020. Owners may contact Cummins customer service at 1-800-286-6467.
Navistar, Inc. (Navistar) is recalling certain 2019-2020 International MV and HV, 2018-2020 Workstar, and 2018-2019 Durastar vehicles equipped with feature codes 12VXT and 12VXU. With the parking brake applied and the automatic transmission in the 'Drive' or 'Reverse' position, when the stationary PTO switch is engaged by the operator, the engine RPM will…
Risk and remedy
Risk
Unintended vehicle movement increases the risk of a crash.
Remedy
Navistar will notify owners, and dealers will update the Engine Control Module to enable the PTO neutral interlock, free of charge. The recall began January 16, 2020. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 19518.
Navistar, Inc. (Navistar) is recalling certain 2017-2020 International DuraStar and WorkStar, 2018-2020 IC Bus CECB, International HV and MV, 2018-2019 IC Bus 1300 FBC and HCCB, and 2019-2020 IC Bus TCCB vehicles equipped with Cummins B6.7 diesel engines with fuel module option number FS90301 or FS90453. The electric fuel heater within the fuel module may…
Risk and remedy
Risk
A fire increases the risk of injury. An engine stall can increase the risk of crash.
Remedy
Cummins will notify the affected Navistar owners. Cummins dealers will replace the fuel heater with a newly designed fuel heater, free of charge. The recall began May 2, 2019. Owners may contact Cummins customer service at 1-800-286-6467 or Navistar customer service at 1-800-448-7825.
Navistar, Inc. (Navistar) is recalling certain 2019 International HV, MV, 2018-2019 HX, LT, RH, LoneStar, ProStar, WorkStar, and 2018 TranStar automated manual transmission vehicles, equipped with certain Eaton ECA heavy-duty truck clutches. An internal component in the clutch assembly may fail, possibly resulting in unintended vehicle movement.
Risk and remedy
Risk
Unintended vehicle movement can increase the risk of a crash.
Remedy
Navistar will notify owners, and dealers will recalibrate the Transmission Control Module (TCM), free of charge. The recall began January 18, 2019. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18518.
Navistar, Inc. (Navistar) is recalling certain 2019 International MV and 2018-2019 International HV trucks equipped with option for combined trailer stop and turn lights. When a trailer is connected to one of the affected vehicles, the trailer brake lights may not illuminate when the truck's brakes are used.
Risk and remedy
Risk
If the trailer brake lights fail to illuminate, other drivers may not be warned of the vehicle slowing, increasing the risk of a crash.
Remedy
Navistar will notify owners, and dealers will relocate the trailer brake light circuits from the trailer turn signal circuits to the vehicle brake light circuits, free of charge. The recall began October 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18514.
Navistar, Inc. (Navistar) is recalling certain 2019 International HX, DuraStar, WorkStar, HV, LoneStar, LT, MV, and RH vehicles, and IC Bus HC, CE, and RE vehicles equipped with long stroke brake chambers and spring actuated parking brakes. The spring actuated parking brake may be improperly crimped to the long stroke service brake chamber, causing a…
Risk and remedy
Risk
An air leak or separation of the spring brake chamber can increase the needed stopping distance, increasing the risk of a crash.
Remedy
Navistar will notify owners, and dealers will replace the brake chamber assemblies from the suspected lot, free of charge. The recall began October 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18512.
Navistar, Inc. (Navistar) is recalling certain 2018-2019 International WorkStar, DuraStar, LoneStar, LT, ProStar, RH and IC Bus HC, 2018 International TranStar, 2019 International HV and MV trucks and transit buses. The front driver and passenger seat belt anchor D-ring bolt may break in the event of a crash. As such, these vehicles fail to comply with…
Risk and remedy
Risk
If the D-ring bolt breaks during a crash, the seat occupant may not be properly restrained, increasing their risk of injury.
Remedy
Navistar has notified owners, and dealers will replace the D-ring bolt depending on the information found on the seat belt label, free of charge. The recall began May 23, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18505.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010428This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean.
- 11005536The purpose of this document is to guide a user to resolve fault code 285 & 286 for Cummins engines.
- 11002889This document will provide the user with cleaning options and procedures for aluminum bright work parts that become stained or tarnished.
- 10254008Certain International vehicles built with A26 engines does meet the emission requirements for J1939-Stationary Test
- 10253986This document will guide the user to inspect oil pan for any sign of damage that could potentially be created by the front axle set screw
- 10253979This document is to guide users to eliminate brake pedal rattle noise.
- 10253970This document details the procedure that must be followed to ensure proper alternator troubleshooting.
- 10251415Cummins ISB Starting system diagnostics.
- 10251414Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine.
- 10249783A26 & S13 Fuel Gelling
- 10246233Tire Pressure Monitoring system; Feature Codes 16VLS, 16VUY, 16VVA, 16VVM, or 16VUZ
- 10246231J1939 Data Link Source Address Information
- 10244926Rebuilding Cylinder Heads on Certain MaxxForce 11/13, N13, and A26 engines; 2010 to present.
- 10244924A26 and S13 Fuel Gelling; only vehicles equipped with International A26 or S13 engines
- 10243610How to request a horsepower quote; all International and Cummins engines
- 10243602HV Enhanced transfer case cooling up-fit
- 10243601Cummins B6.7 Grid Heater Relay
- 10243596General Wheel Speed Sensor Troubleshooting
- 10243595Diagnosis of chassis wander complaints.
- 10241556Starter kicks out after 1 second on MV and HV with Cummins L9 Engines
- 10241555J1939 Data Link Source Address Information
- 10241554J1939 Data Link Troubleshooting
- 10240193Snap-On torque wrench requirement for all big bore engine connecting rod bolts; A26, MaxxForce 13, N13 engines
- 10238860Fifth Wheel Unlock - Trailer Lamp Detection Calibration. Only models equipped with BCM feature code 597017
- 10238858QLS Emergency Calibration Revert Process
- 10238857This Emissions Recall applies to truck models for which, per agreement with EPA and CARB, Navistar, Inc. provided an emergency calibration for International A26 engines when a DEF Quality Sensor (DQS) was not available. This action addressed the Diesel Exhaust Fluid (DEF) Quality Sensor failures in the field and the unavailability of parts due to the worldwide chip shortage. This recall is step two of this program designed to revert all affected vehicles back to the certified calibration and to provide them with the latest improved DQS and Coolant Control Valve (CCV) designs. Additionally, the emergency calibration and the restoration to the certified calibration with the latest improved DQS and Coolant Control Valve (CCV) designs have no effect on vehicle Emissions.
- 10237479N2 telematics module not communicating with OCC systems. Only models built with feature codes 10ADT, 10AEY, 10AEU, 10AEZ, 10AGB, or 10AGC built from 04/04/2019 through 11/01/2022.
- 10237470Cummins B6.7 and L9 engines with codes 285 and 286
- 10237468New air compressor incorporates an oil feed dowel O-ring. Only models equipped with 2010 and newer MaxxForce 11/13 engines, all N13, and A26 engines
- 10237462QLS Emergency Calibration Revert Process
- 10237456Certain HV 4X4 series trucks built with two-piece driveline may experience vibration when driving at highway speed.
- 10237447Per agreement with EPA and CARB, Cummins, Inc. provided an emergency calibration for Cummins ISB, B6.7, ISL9, L9, and X15 engines when a DEF Quality Sensor (DQS) was not available. This action addressed the Diesel Exhaust Fluid (DEF) Quality Sensor failures in the field and the unavailability of parts due to the worldwide chip shortage. This recall is step two of this program designed to revert all affected vehicles back to the certified calibration and to provide them with the latest improved DQS and Coolant Control Valve (CCV) designs. Additionally, the emergency calibration and the restoration to the certified calibration with the latest improved DQS and Coolant Control Valve (CCV) designs have no effect on vehicle Emissions.
- 10236043Tire Pressure Monitoring systems (TPMS); Only LT, RH, HV, HX, or MV series trucks with feature code 16VLS, 16VUY, 16VVA,16VUZ, or 16VVM
- 10236042New Air compressor Incorporates an oil feed dowel O-ring; only models built with MaxxForce 11/13, N13, or A26 Engines
- 10234021Rebuilding cylinder heads on certain EPA 2010 MaxxForce 11/13, N13, and A26 Engines
- 10234015Cummins Programming guide and fault codes285 & 265; only vehicles built with Cummins B6.7, X15, or L9 engines
- 10234007Telematics installation guidelines - Only units with 500K data link
- 10234000Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI engines or Cummins ISB engine with Allison transmissions
- 10232616Rebuilding Cylinder Heads on Certain International MaxxForce 11/13 engines and all International N13 and A26 engines
- 10232615Service Diagnostic Software (SDS) Template to enable Recall 22518 connecting rod knock detection software. Only vehicles with International A26 Engine
Every International HV model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.