2024 International HV
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › International › HV › 2024
These records cover every 2024 International HV. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2024 International HV. Newest first.
International Motors, LLC (International) is recalling certain 2024 HV, 2020-2025 MV, and 2019 Workstar 7400 trucks. The caliper may contact a suspension spring or axle U-bolt and prevent the outer brake pad from functioning.
Risk and remedy
Risk
A loss of outer brake pad function can extend the vehicle's stopping distance, increasing the risk of a crash.
Remedy
Dealers will switch the left and right rear air disc brake calipers, replace the rear brake torque plates, and replace the brake pads, free of charge. Owner notification letters were mailed May 12, 2025. Owners may contact International customer service at 1-800-448-7825. International's number for this recall is 25501.
International Motors, LLC (International) is recalling certain 2021-2024 Lonestar, 2021-2025 RH, HV, MV, LT, HX, and 2022 PROSTAR vehicles, equipped with Bendix EC80 Advanced Electronic Control Units (ECU). Electrical noise and low signal to the power line carrier may cause the ECU to incorrectly process commands or stop working.
Risk and remedy
Risk
Safety systems that depend on the ECU (Automatic Traction Control, ABS, Electronic Stability Control, Active Cruise Control, and Collison Mitigation System) may have diminished or lost functionality, increasing the risk of a crash.
Remedy
International will work with Bendix to reprogram the ECU software, free of charge. Owner notification letters were mailed December 16, 2024. Owners may contact International customer service at 1-800-448-7825. International's number for this recall is 24515.
Navistar, Inc. (Navistar) is recalling certain 2024 International HX, LT, RH and 2024-2025 International HV, MV trucks and 2024 IC Bus CE commercial buses. The steering gear assemblies may have been assembled incorrectly with fewer recirculating balls than are required, which may result in a loss of steering control.
Risk and remedy
Risk
A loss of steering control increases the risk of a crash.
Remedy
Dealers will inspect and replace the defective gears, free of charge. Owner notification letters were mailed September 30, 2024. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 24503.
Navistar, Inc. (Navistar) is recalling certain 2024 International HV and International MV trucks. The driver's seat belt tether bolt may not be properly seated in the anchor, causing a bind at the anchor point.
Risk and remedy
Risk
An improperly anchored seat belt tether may not restrain an occupant as intended, increasing their risk of injury during a crash.
Remedy
Dealers will inspect and replace the seat belts as necessary, free of charge. Owner notification letters were mailed February 26, 2024. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 24501.
Navistar, Inc. (Navistar) is recalling certain 2021-2024 International HV, HX, LoneStar, LT, MV, eMV, and RH trucks, and IC Bus CE, 2021-2023 IC Bus RE, and 2022-2023 IC Bus TC Commercial Buses. The anti-lock brake system (ABS) indicator light does not remain illuminated when a malfunction exists, and when the vehicle's ignition switch is on, and the…
Risk and remedy
Risk
An ABS indicator light that fails to remain illuminated will not alert the driver of an ABS malfunction, which could increase the risk of a crash.
Remedy
Towing variant vehicles under this campaign will not be repaired under recall 24V-8918. Dealers will update the software, free of charge. Owner notification letters are expected to be mailed July 24, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23515.
Navistar, Inc. (Navistar) is recalling certain 2022-2024 International HV, International MV trucks, and 2022-2023 IC Bus TC commercial buses. When the parking brake is applied, the automatic transmission is still in drive or reverse position, and the stationary power take-off (PTO) switch is engaged by the operator, the engine may rev and overcome the…
Risk and remedy
Risk
Unexpected vehicle movement can increase the risk of a crash or injury.
Remedy
Dealers will update the Cummins ECM software, free of charge. Owner notification letters are expected to be mailed April 24, 2023. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23504. This recall expands previous NHTSA recall number 20V-810.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010428This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean.
- 11008345This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean. If you are not able to come to a repair direction after completely following the article and filling out the form, please attach the form and requested photos to a case file for further assistance
- 11006681This document will guide the user through installing the upper mounting hardware in place of the missing C-Loop and/or look down mirrors.
- 11002889This document will provide the user with cleaning options and procedures for aluminum bright work parts that become stained or tarnished.
- 11002836The Exhaust Gas Sensor In-Use Monitor Performance Ratio (IUMPR) may operate below the prescribed standard.
- 10253986This document will guide the user to inspect oil pan for any sign of damage that could potentially be created by the front axle set screw
- 10253979This document is to guide users to eliminate brake pedal rattle noise.
- 10253970This document details the procedure that must be followed to ensure proper alternator troubleshooting.
- 10251415Cummins ISB Starting system diagnostics.
- 10251414Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine.
- 10249783A26 & S13 Fuel Gelling
- 1024978224A02 EFIX for addressing BCM programming for no FLR icons/messages in cluster
- 10246233Tire Pressure Monitoring system; Feature Codes 16VLS, 16VUY, 16VVA, 16VVM, or 16VUZ
- 10246231J1939 Data Link Source Address Information
- 10244931Endurant Plumbing Retrofit; only models built with endurant transmission built before 11/01/2023
- 10244926Rebuilding Cylinder Heads on Certain MaxxForce 11/13, N13, and A26 engines; 2010 to present.
- 10244924A26 and S13 Fuel Gelling; only vehicles equipped with International A26 or S13 engines
- 10243610How to request a horsepower quote; all International and Cummins engines
- 10243602HV Enhanced transfer case cooling up-fit
- 10243601Cummins B6.7 Grid Heater Relay
- 10243596General Wheel Speed Sensor Troubleshooting
- 10243595Diagnosis of chassis wander complaints.
- 10241556Starter kicks out after 1 second on MV and HV with Cummins L9 Engines
- 10241555J1939 Data Link Source Address Information
- 10241554J1939 Data Link Troubleshooting
- 10240193Snap-On torque wrench requirement for all big bore engine connecting rod bolts; A26, MaxxForce 13, N13 engines
- 10237470Cummins B6.7 and L9 engines with codes 285 and 286
- 10237468New air compressor incorporates an oil feed dowel O-ring. Only models equipped with 2010 and newer MaxxForce 11/13 engines, all N13, and A26 engines
- 10237465HV Exhaust Side Step Heat Shield Latching Area Cracking
- 10236043Tire Pressure Monitoring systems (TPMS); Only LT, RH, HV, HX, or MV series trucks with feature code 16VLS, 16VUY, 16VVA,16VUZ, or 16VVM
- 10236042New Air compressor Incorporates an oil feed dowel O-ring; only models built with MaxxForce 11/13, N13, or A26 Engines
- 10234021Rebuilding cylinder heads on certain EPA 2010 MaxxForce 11/13, N13, and A26 Engines
- 10234015Cummins Programming guide and fault codes285 & 265; only vehicles built with Cummins B6.7, X15, or L9 engines
- 10234007Telematics installation guidelines - Only units with 500K data link
- 10234000Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI engines or Cummins ISB engine with Allison transmissions
- 10232617Installation of the 7104674C92 Engine Sensor Harness on 2021 and Newer International A26B engines.
- 10232616Rebuilding Cylinder Heads on Certain International MaxxForce 11/13 engines and all International N13 and A26 engines
Every International HV model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.