2017 International HX
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › International › HX › 2017
These records cover every 2017 International HX. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2017 International HX. Newest first.
Navistar, Inc. (Navistar) is recalling certain 2017-2018 International ProStar and 9900i trucks, 2018-2019 International LT trucks, 2017-2019 International LoneStar and HX trucks and 2017 International PayStar trucks, equipped with Cummins ISX15 or X15 diesel engines. In certain driving conditions, such as on a long down-hill grade, the fuel line may burst…
Risk and remedy
Risk
If the fuel line bursts, fuel may leak onto the road resulting in a roadway hazard for other motorists. The engine may also stall without warning, resulting in the vehicle's inability to restart, increasing the risk of a crash.
Remedy
Cummins will notify the affected owners and dealers will replace the nylon fuel line with a steel fuel line, free of charge. Navistar issued owners an interim notification on October 11, 2018. The recall began November 21, 2018. Owners may contact Navistar customer service at 1-800-448-7825, or Cummins customer service at 1-800-286-6467.
Navistar, Inc. (Navistar) is recalling certain 2017-2019 International HX severe service diesel trucks equipped with feature code 04091 (dual air brake system) and 04AZY (Antilock Brake System (ABS) with 6 channel Electronic Stability Protection (ESP)). The air supply line to the SR7 roll stability valve may have been improperly routed to the ATR6 brake…
Risk and remedy
Risk
During a stability control oversteer event when there are slippery road conditions, the parking brakes may be modulated unintentionally, potentially causing a loss of control and increasing the risk of a crash.
Remedy
Navistar will notify owners, and dealers will reroute the SR7 roll stability valve supply line to the ATR6 brake control valve control port, free of charge. The recall began on June 12, 2018. Owners may contact Navistar customer service at 1-800-448-7825. Navistar's number for this recall is 18504.
Navistar, Inc. (Navistar) is recalling certain model year 2017 International ProStar, LoneStar, PayStar, HX, and 9900 trucks equipped with a Cummins ISX15L engine using certain engine control modules (ECM). These ECM's may experience an internal electrical short that can cause a fuse to blow, resulting in an unexpected engine stall without the ability to…
Risk and remedy
Risk
An engine stall can increase the risk of a crash.
Remedy
Cummins will notify owners, and Cummins dealers will replace the ECM, free of charge. The recall began on July 8, 2016. Owners may contact Cummins customer service at 1-800-343-7357 or Navistar customer service at 1-331-332-1590.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010428This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean.
- 11006680This document will guide the user through repairing frame cracks and installing inner and outer frame reinforcement on HX models with C1 frame rail feature code 001cgc.
- 11002889This document will provide the user with cleaning options and procedures for aluminum bright work parts that become stained or tarnished.
- 11002887The purpose of this article is to describe all aspects of the A26 connecting rod replacement repair processes.
- 10254008Certain International vehicles built with A26 engines does meet the emission requirements for J1939-Stationary Test
- 10253979This document is to guide users to eliminate brake pedal rattle noise.
- 10253970This document details the procedure that must be followed to ensure proper alternator troubleshooting.
- 10251414Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine.
- 10251409Suggested alignment target values when performing a vehicle axle alignment.
- 10249783A26 & S13 Fuel Gelling
- 10248310Cracked air cleaner housings; only Pre 2021 HX series trucks with Cummins X15 and feature code 12VBG - cowl mounted air cleaner.
- 10246231J1939 Data Link Source Address Information
- 10244926Rebuilding Cylinder Heads on Certain MaxxForce 11/13, N13, and A26 engines; 2010 to present.
- 10244924A26 and S13 Fuel Gelling; only vehicles equipped with International A26 or S13 engines
- 10243610How to request a horsepower quote; all International and Cummins engines
- 10243596General Wheel Speed Sensor Troubleshooting
- 10243595Diagnosis of chassis wander complaints.
- 10243594Certain International N13 engines may be noncompliant to the required On Board Diagnostics (OBD) Monitor, Manufacturers Self-Test (MST) for over-boost, Exhaust Gas Recirculation (EGR) low flow, and EGR high flow monitors. Under certain conditions, this noncompliance may result in the failure to detect an increase in regulated air pollutants.
- 10241558HX, PayStar, and 9900 Transmission Shifter Disengaging
- 10241555J1939 Data Link Source Address Information
- 10241554J1939 Data Link Troubleshooting
- 10240193Snap-On torque wrench requirement for all big bore engine connecting rod bolts; A26, MaxxForce 13, N13 engines
- 10238858QLS Emergency Calibration Revert Process
- 10238857This Emissions Recall applies to truck models for which, per agreement with EPA and CARB, Navistar, Inc. provided an emergency calibration for International A26 engines when a DEF Quality Sensor (DQS) was not available. This action addressed the Diesel Exhaust Fluid (DEF) Quality Sensor failures in the field and the unavailability of parts due to the worldwide chip shortage. This recall is step two of this program designed to revert all affected vehicles back to the certified calibration and to provide them with the latest improved DQS and Coolant Control Valve (CCV) designs. Additionally, the emergency calibration and the restoration to the certified calibration with the latest improved DQS and Coolant Control Valve (CCV) designs have no effect on vehicle Emissions.
- 10237468New air compressor incorporates an oil feed dowel O-ring. Only models equipped with 2010 and newer MaxxForce 11/13 engines, all N13, and A26 engines
- 10237462QLS Emergency Calibration Revert Process
- 10237447Per agreement with EPA and CARB, Cummins, Inc. provided an emergency calibration for Cummins ISB, B6.7, ISL9, L9, and X15 engines when a DEF Quality Sensor (DQS) was not available. This action addressed the Diesel Exhaust Fluid (DEF) Quality Sensor failures in the field and the unavailability of parts due to the worldwide chip shortage. This recall is step two of this program designed to revert all affected vehicles back to the certified calibration and to provide them with the latest improved DQS and Coolant Control Valve (CCV) designs. Additionally, the emergency calibration and the restoration to the certified calibration with the latest improved DQS and Coolant Control Valve (CCV) designs have no effect on vehicle Emissions.
- 10236042New Air compressor Incorporates an oil feed dowel O-ring; only models built with MaxxForce 11/13, N13, or A26 Engines
- 10234021Rebuilding cylinder heads on certain EPA 2010 MaxxForce 11/13, N13, and A26 Engines
- 10234015Cummins Programming guide and fault codes285 & 265; only vehicles built with Cummins B6.7, X15, or L9 engines
- 10234007Telematics installation guidelines - Only units with 500K data link
- 10234000Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI engines or Cummins ISB engine with Allison transmissions
- 10232616Rebuilding Cylinder Heads on Certain International MaxxForce 11/13 engines and all International N13 and A26 engines
- 10231068QLS Emergency ECM Calibration; only models equipped with Cummins B6.7, X15, L9, or International A26 engines
- 10227464A26 connecting rod replacement process; only models with A26 engines built before November 2019.
- 10227455J1939 Data link source address information
- 10227446QLS Emergency Calibration. applies to 2016 and newer Cummins B6.6, X15, and L9 engines and all A26 engines
- 10227433HX series rear crossmember cracking.
- 10222490Pico Scope CCOS (Crankcase Separator Test)
- 10219330PicoScope Test One Channel RCT
Every International HX model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.