2018 Isuzu Npr
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2018 Isuzu Npr. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2018 Isuzu Npr. Newest first.
Diesel Modification Center LLC. (Diesel Modification Center) is recalling certain 2018-2019 Isuzu NQR ,NRR, and NPR vehicles modified to be equipped with dual steering. The keystock may become dislodged from the steering cross shaft and cause unexpected loss of right hand steering.
Risk and remedy
Risk
Unexpected loss of steering increases the risk of a crash.
Remedy
Diesel Modification Center will notify owners, and dealers will verify the keystock is in place or replace it, as necessary. In addition, the set screw will be retorqued and a stamp will be drifted in the keyed slot to ensure the keystock stays in the correct position, free of charge. The recall began November 11, 2019. Owners may contact Diesel Modification Center customer service at 1-256-457-1726.
Unicell Body Company Inc. (Unicell) is recalling certain 2017-2019 Chevrolet Express and GMC Savanna, 2018-2019 Hino 155, Ford Econoline and Transit and Isuzu NPR, and 2018 Ram ProMaster-based vehicles equipped with ASA Electronics Voyager monitors used to display the back-up camera image. The affected monitors may revert back to the factory default…
Risk and remedy
Risk
The driver may inadvertently turn the wrong direction to avoid an object behind the vehicle, increasing the risk of a crash.
Remedy
Unicell will work with ASA Electronics to notify owners and offer a remedy, free of charge. The recall began May 9, 2019. Owners may contact ASA Electronics customer service 1-800-384-4400 or Unicell at 1-716-853-8628.
Isuzu Technical Center of America, Inc. (Isuzu) is recalling certain 2018 Isuzu NPR and 2019 Isuzu NPR-HD and NPR-XD vehicles. These vehicles have a brake switch and nylon retainer that may not have been properly secured into the steel brake pedal assembly bracket.
Risk and remedy
Risk
If the brake switch and nylon retainer are not properly secured, the switch can detach from the bracket causing the brake lights to illuminate whether or not brake pedal is depressed, the shift interlock will not operate and the accelerator pedal input will be disabled resulting in the inability to accelerate. These conditions can increase the risk of a crash.
Remedy
Isuzu has notified owners, and dealers will inspect the seating of the retainer, and re-seat the retainer clip or replace the retainer clip, if necessary, free of charge. The recall began on April 24, 2018. Owners may contact Isuzu customer service at 1-866-441-9638. Isuzu's number for this recall is V1801.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10244941This bulletin provides information with regards to the Isuzu Commercial Vehicle (CV) Service Policies and Procedures Manual (SPPM). The Isuzu CV SPPM (sections 2.15 and 2.16) provides detailed procedures related to vehicle storage up to and beyond 30 days. Performing these required procedures at the specified intervals will properly maintain vehicles until they are retailed. Failure to follow the procedures outlined may result in repairs and additional costs that could have been avoided. We are providing dealers with this brief overview of the recommended procedures as a reminder to maintain older inventory. Failures resulting from improper, or lack of, storage procedures are not covered under the vehicle factory warranty.
- 10237146This bulletin outlines the procedures for using the Alpine Exchange Program (the "Exchange Program"). The Exchange Program must be used when any Alpine radio or other component covered by this bulletin is repaired under warranty and may also be used for radio and component repairs not covered under warranty. Contact Alpine directly for pricing and payment methods applicable to radio and component repairs not covered under warranty.
- 10225521We have received reports of the front turn signal lenses cracking on Isuzu vehicles. These lenses are cracking from the effects of being washed with alkaline detergents. Alkaline detergents are typically used in industrial settings and are reactive with the paint, metals, and other materials used to make up the exterior components of Isuzu vehicles. Isuzu recommends that only neutral detergents be used when washing Isuzu vehicles. However, if alkaline detergents are used to wash an Isuzu vehicle, it is crucial that all traces of the detergent are rinsed away with water or wiped off as necessary. Allowing alkaline detergent to dry on the turn signal lenses will cause them to crack. Each Isuzu vehicle is originally equipped with an Owner's Manual that includes guidelines for the proper exterior maintenance of the vehicle. The following guidelines are typical of those found in an Isuzu Owner's Manual concerning the use of detergents on a vehicle's exterior.
- 10218932Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback. This bulletin was revised to add a Parts Warranty Form
- 10218927Isuzu Commercial Truck of America, Inc. (ICTA) is providing the following procedural recommendations to improve dealer efficiency when submitting Parts Warranty claims. We strongly recommend dealers follow these procedures in order to avoid delays in Parts Warranty claim payments and/or claim chargeback.
- 10217004The Isuzu Commercial Truck of America (ICTA) Service Technical Assistance Center (TAC) provides diagnostic support to Isuzu dealer technicians repairing Isuzu vehicles in and out of vehicle warranty. A TAC case number will be issued solely for information tracking purposes and future contact reference.
- 10217001The following is a list of the Isuzu-recommended Threebond product part numbers identified in the various Isuzu Workshop Manuals and bulletins. If a Threebond product is unavailable, we recommend that you utilize the chart below to find equivalent of similar products (when available) from Loctite and Permatex.
- 10201566In an effort for continuous improvement, Isuzu has a need to obtain Mimamori ECU
- 10178754Isuzu diesel engines available in the above affected vehicles meet the california air resource board's (carb) optional idling emissions standard of 30 grams per hour of oxides of nitrogen (nox) with no increase in the emission of other regulated pollutants. As a result these vehicles have been approved as "certified clean idle" and are "exempt" from the engine shutdown system (ess) requiremnet pursuant ot section 1956.8 of title 13, california code of regulations. As required by the ess regulation, for "certificed clean idle" vehicles, isuzu has introduced a tamper resistance "certified clean idle" label located on the driver's side door panel. It IS important that this label remain, permanently, on the vehicle to identify it as "certified clean idle." carb requires this label as evidence that, at hte time of manufacture, the engine installed met the applicable emission standards. Should the label be found missing or damged during an inspection, a citation and penalties may be issued. If the vehicle IS operated in california with a damaged or missing clean idle label, isuzu recommends vehicle operators follow the 5 minute ess requirement by manually turning off the engine. Following this ess requiremnet will keep the vehicle operation compliant until a replacement label can be installed. "Clean air idle" labels are printed with a serial number and registered to an individual vin. As a result, a replacemnet label will also include a new serial number which must be registered to the vehicle's vin by the manufacturer. The below information IS provided to assit in acquiring, replacing and registering a replacement label.
- 10178753This information IS being issued to help dealers identify apotenetial source for fuel contamination. If a customer's complaint leads to the discovery of contaminated fuel, the source of the contamination must be found and repaired. Contaminated fuel may result in many different failures. Some examples of these failures are: plugged fuel filters, poor engine performace, check engine light illumination, fuel system (lines and tank) corrosion (rust), etc... Isuzu's failure investigations have found a common occurance of the fuel filler neck being installed incorrectly. This poor installation will allow unwanted material to enter the fuel tank contaminating the fuel. Use the information below to confirm the fuel filler neck IS installed correctly. If the filler neck installation IS incorrect, use the information below to repair the fuel filler neck. Detailed information regarding fuel filler neck installation can be found in isuzu's body builder guide.
Every Isuzu Npr model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.