2006 Lexus GS
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2006 Lexus GS. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2006 Lexus GS. Newest first.
Toyota IS recalling certain model year 2006-2009 lexus IS and model year 2006-2007 lexus GS vehicles. due to insufficient tightening of the fuel pressure sensor connected to an engine fuel delivery pipe with nickel phosphorus plating, there IS a possibility that, over time, the pressure sensor could loosen. if loosening occurs, fuel could leak past a…
Risk and remedy
Risk
Fuel leakage, in the presence of an ignition source, could result in a fire.
Remedy
Dealers will inspect for fuel leakage from the threaded portion of the fuel pressure sensor and if a fuel leak IS not confirmed, dealers will further tighten the fuel pressure sensor with the proper torque. if a fuel leak IS confirmed, the gasket between the sensor and the fuel deliver pipe will be replaced with a new one, and the sensor will be tightened with the proper torque. this service will be performed free of charge. the safety recall began on march 7, 2011. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling certain model year 2005-2006 avalon, model year 2004-2006 highlander, model year 2004-2006 lexus RX, and model year 2006 lexus GS and IS vehicles. brake fluid containing polymers IS used that acts as lubricants for certain brake system components. if replacement brake fluid IS used that does not contain such polymers, or that contains…
Risk and remedy
Risk
A leak of brake fluid could lead to a change in brake pedal feel and overtime a degradation in braking performance increasing the risk of a crash.
Remedy
Dealers will replace the seal with a newly designed one. this service will be performed free of charge. the safety recall began on november 15, 2010. owners may contact toyota at 1-800-331-4331 and lexus at 1-800-255-3987.
Toyota IS recalling 214,570 my 2006-2008 lexus IS, my 2006-2007 GS and my 2007-2008 LS passenger vehicles equipped with aluminum fuel delivery pipes (fuel rails). ethanol fuels with a low moisture content will corrode the internal surface of the fuel rails. as this condition progresses, the engine malfunction indicator light may illuminate.
Risk and remedy
Risk
Over time, the corrosion may create a pinhole resulting in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a fire.
Remedy
Dealers will inspect and replace the fuel delivery pipes free of charge. the recall IS expected to begin during february 2009. owners may contact toyota/lexus at 1-800-255-3987.
On certain vehicles, high stress areas may have been created in two specific fuel pipes located in the engine compartment. combined with other factors such as the presence of corrosive agents in fuel, a crack may form over time leading to fuel leakage from the fuel line(s).
Risk and remedy
Risk
Fuel leakage in the presence of an ignition source could result in a fire.
Remedy
Dealers will replace the two involved fuel lines with newly designed lines free of charge. the recall began on december 15, 2007. owners may contact lexus at 1-800-255-3987.
On certain passenger vehicles, if the front seat belt retractors (both driver and front passenger) become locked, they may not release due to a component of the emergency locking system. if the seat belt IS locked in this condition, the occupant may not be able to properly fasten the seat belt.
Risk and remedy
Risk
An occupant not properly wearing a seat belt may have an increased risk of injury during a crash.
Remedy
Dealers will replace the front seat belt assemblies. the recall began on april 21, 2006. owners may contact lexus at 1-800-255-3987.
On certain vehicles, due to improper assembly of the air bag inflator, which IS used in the side air bag, the curtain shield air bag, and the knee air bag assembly, some inflators were produced with an insufficient amount of the heating agents necessary for proper air bag deployment. in this condition, the expansion force of the gas may be insufficient to…
Risk and remedy
Risk
This may increase the risk of injury to the occupant in the involved seating position in the event of a crash.
Remedy
Dealers will replace the specific srs air bag. the recall began on april 6, 2006. owners may contact toyota at 1-888-270-9371, scion at 1-866-548-1851, or lexus at 1-800-255-3987.
Owner complaints
44 complaints2 involved a crash2 injuries1 deaths
What owners report most
Latest complaints
- Unknown or other
6.The crash involved complex vehicle systems that may have been manipulated using advanced techniques. I have it documented as a PDF files, can email anytime...
- Power train
I have been facing transmission issues that require the vehicle to shift up to move even at low speeds, with the transmission shifting either hard or smoothly, and often unnecessarily to a higher gear. This issue is rare but occurs frequently. I think this is a factory defect because I have been seeing lots of YouTube videos where they mention that the transition in these cars feels jerky, sluggish, etc.
- Unknown or other
Front windshield is loose and vibrates/flutters when driving. The car has not been in an accident and has no apparent rust. It has been garaged and is available for inspection. There are no warning indicators. My concern is that the windshield could unseat or break while driving. Self…
Front windshield is loose and vibrates/flutters when driving. The car has not been in an accident and has no apparent rust. It has been garaged and is available for inspection. There are no warning indicators. My concern is that the windshield could unseat or break while driving. Self inspection shows the windshield is loose when gentle pressure is applied from both internal top sides of window. A possible related issue is damage to rearview mirror where mirror coating is damaged to the point where it is unusable.
- Unknown or other
ECM is not functioning properly it is a safety as the car when downshifting jumps and it can be easy to lose control of the vehicle. I’ve taken it to a few people and there was a service bulletin and recall for the ECM but not on my VIN number it has not been inspected there are no check engine lights on the vehicle but ir continues to very hard shift from 2nd to 1st.
- Fuel/propulsion system
My Lexus GS430 has a fuel rail leak that is leaking into the engine bay and has a strong smell of fuel into the cabin of the car. It is especially strong in the cabin when the heat or air conditioning is utilized. It is extremely dangerous and after researching I have found that it a problem with several of the Lexus lines of cars built around the 2006-2008 models.
- Engine
Car is consuming excessive amounts of oil. A quart every 200 miles or so. Also even after doing an oil change the car is not leaking the oil but burning it. Please enforce The National Traffic and Motor Vehicle Safety Act (originally enacted in 1966 and now recodified as 49 U.S.C. Chapter 301). Contacted lexus but the car is out of warranty. The car is burning too much oil leading to more pollutants.
- Electrical system · Engine · Fuel/propulsion system
Car wouldn’t start. Had it diagnosed and found out my fuel pressure sensor had melted and was leaking fuel had it replaced bug still smell gas in and around car. Car was under recalm for same issue years back and was serviced at the dealership. So I don’t see how im liable for repairs if it was a problem when the car came off the assembly line
- Air bags · Forward collision avoidance › Warnings
I was hit head on and all the other airbags went off except for my steering wheel airbag. I broke my nose and ripped of part of my lip and needed over 30 stitches. I also job have painful scaring on my face. I was wearing my seat belt as well. The insurance company has the vehicle now so I…
I was hit head on and all the other airbags went off except for my steering wheel airbag. I broke my nose and ripped of part of my lip and needed over 30 stitches. I also job have painful scaring on my face. I was wearing my seat belt as well. The insurance company has the vehicle now so I don't know if it's available for inspection I don't know if it's been inspected by anyone. I didn't see any specific warning lights connected to the steering wheel or airbag system Although there were lights for the tire sensors.
- Electrical system · Unknown or other
I am having transmission problem along with ecu problems. Car has rough down shifting problems when in motion . After doing research many lexus GS models have those common issues.
- Electronic stability control (esc) · Steering
The steering wheel locked up while coming off the highway. I had to pull over to side of the road and eventually have the car towed. The steering wheel IS still locked this day. I can't turn it left or right. I could have gotten into a accident with the sudden lost of power steering to my vehicle
- Power train
Transmission needs to be replaced. Not shifting out of third and jerking
- Visibility/wiper
The backing on the glass of the rear-view mirror has disintegrated encumbering visibility and diminishing the mirror's purpose and function. Lexus has a fix for this problem by replacing the glass but the dealers are not making it available. Instead, the dealers are forcing us to purchase a new…
The backing on the glass of the rear-view mirror has disintegrated encumbering visibility and diminishing the mirror's purpose and function. Lexus has a fix for this problem by replacing the glass but the dealers are not making it available. Instead, the dealers are forcing us to purchase a new mirror at a cost of $1400 plus tax and the cost of installation. Mirrors are a basic component of all vehicles and proper visibility while driving IS a must. I don't think it IS unreasonable to believe that the mirrors should last the entire life of the vehicle, especially on a luxury vehicle. Lexus should be replacing the glass at no cost. *tr
- Visibility/wiper
Inside rearview mirror has progressively developed black markings over past several years throughout the mirror obstructing my rearview vision in both daylight and after dark. very well documented by other lexus owners. lexus has not and IS not planning on any recalls but this IS a clear safety…
Inside rearview mirror has progressively developed black markings over past several years throughout the mirror obstructing my rearview vision in both daylight and after dark. very well documented by other lexus owners. lexus has not and IS not planning on any recalls but this IS a clear safety risk and has caused several close encounters as I had my vision obstructed and nearly caused several traffic accident due to obstructed view. have presented this concern to lexus numerous times but without acknowledgement that this IS a safety concern but the replacement mirror IS $1000. I am the sole owner since purchased new in 2005, garaged home and work, extremely well maintained at lexus dealership since new and with each service, it IS discussed but without support for replacement. clearly IS manufacturer defect in production and increasing safety concern. *tr
- Unknown or other
The rear view mirror has developed black spots within the glass and IS impossible to see out of it. There IS tsb (l-sb-0043-16} but not a recall... The lexus belonged to my father that passed away and never really drove the car
- Electronic stability control (esc) · Engine · Fuel/propulsion system
Vsc/check engine light on
- Service brakes
ABS module unit failure does not provided proper pressure to brake on time ..very slow response time to brake ...
- Visibility/wiper
Interior rearview mirror developed black markings throughout mirror making it almost impossible to visualize rearview traffic. the response from lexus IS that the glass itself or the materials behind the glass are breaking down resulting in the functional loss of the rearview mirror which now has…
Interior rearview mirror developed black markings throughout mirror making it almost impossible to visualize rearview traffic. the response from lexus IS that the glass itself or the materials behind the glass are breaking down resulting in the functional loss of the rearview mirror which now has become dangerous for driving. Has been progressively getting worse over past several years. lexus IS aware of this defect and occurs in a number of their older models but IS not accepting responsibility for repairing or replacing mirror which costs the consumer almost $2000 for a new replacement which IS financially unobtainable for many owners.
- Electrical system · Electronic stability control (esc) · Vehicle speed control
Hello everyone -- I have 06 lexus gs300. I had a rebuilt transmission, new valve six solenoids. Because I had harsh on the 2 to 1 downshift. That didn't fixed the problem, and they told me about the ecu the new computer will cost me $1550 on top of the $2200 I had to pay for the transmission and…
Hello everyone -- I have 06 lexus gs300. I had a rebuilt transmission, new valve six solenoids. Because I had harsh on the 2 to 1 downshift. That didn't fixed the problem, and they told me about the ecu the new computer will cost me $1550 on top of the $2200 I had to pay for the transmission and labor too. Their should be a recall notice. How can we alert lexus of this problem and shift the cost to them for their repairs?
- Electrical system · Power train
Transmission problem shifting from 1 to 3 and don't shift up more than that ,mechanic asked to change the transmission cause its major problem for this car . too many people complaining about that .
- Visibility/wiper
Rear view mirror reflection IS degrading and causing poor visibility, therefore affecting safety and resale value of vehicle. Lexus issued a tsb 0186-09 but no recall. It IS a $2000 repair. We have owned 5 lexus vehicles, 3 purchased new, and only the 2006 GS 300, purchased new, IS exhibiting this issue. This IS an issue that has been reported by others.
- Visibility/wiper
My rearview mirror IS complete deteriorated to a point that it can no longer see any object in the mirror. It has become a safety issue the replacement mirror will cost more than $1800 from lexus it IS a safety device not like radio or power window. We bought a lexus not pinto. What a disappointment!
- Engine
My lexus 2006 gs300 has misfire problem at 108355 miles, with error codes ps300, 301, and 302. spoke with dealership (longo lexus), and they told me the customer satisfactory program (csp) IS already expired to free repair by lexus in 2016. if lexus has defective valve spring that caused the…
My lexus 2006 gs300 has misfire problem at 108355 miles, with error codes ps300, 301, and 302. spoke with dealership (longo lexus), and they told me the customer satisfactory program (csp) IS already expired to free repair by lexus in 2016. if lexus has defective valve spring that caused the carbon build up, then they should send us the safety recall letter, and I have never received any. that's very irresponsible in their part.
- Air bags · Engine
I took my car into the dealer twice for the oil consumption issues during the period they offered it. I was turned away both times and only after the "repair period" ended was I informed that there was one to begin with. I've read about multiple people having the recall performed who had the same…
I took my car into the dealer twice for the oil consumption issues during the period they offered it. I was turned away both times and only after the "repair period" ended was I informed that there was one to begin with. I've read about multiple people having the recall performed who had the same problem as me. My care now needs two to three quarts of oil per month and I was screwed out of my repair. Now we have the airbag light. I've read quite a few things online about temporarily repairing this airbag harness myself but thats not a solution to the actual problem. My children are in this vehicle daily and not having a fully functional airbag system IS not at all safe.
- Engine
Vehicle idling rough when coming to a stop. Consuming oil at high rate. car has actually stopped running while driving. I have been attempting to have this issue resolved with the dealer and lexus since the vehicle was purchased.
- Seat belts
Takata recall. driver's side seat belt does not retract or operate properly.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Unintended and Uncontrolled Acceleration
On February 16, 2010, NHTSA's Office of Defects Investigation (ODI) opened RQ10-003 to determine whether the scope of prior Toyota recalls relating to potential unintended acceleration were sufficiently broad, including, among others, Toyota recalls 07E-082, 09V-388, 10V-017, and 10V-023.NHTSA also requested…
On February 16, 2010, NHTSA's Office of Defects Investigation (ODI) opened RQ10-003 to determine whether the scope of prior Toyota recalls relating to potential unintended acceleration were sufficiently broad, including, among others, Toyota recalls 07E-082, 09V-388, 10V-017, and 10V-023.NHTSA also requested information regarding potential electronic causes of unintended acceleration in Toyota and Lexus vehicles.I. Pedal Interference from Floor mats, Carpet Covers and Plastic Pads in Carpets.During the RQ10-003 investigation, ODI reviewed a large volume of documents to assess whether additional vehicles should be recalled.Following the agency's analysis, NHTSA requested that Toyota recall additional vehicles.Toyota complied with the agency's request.The details of these recalls are set forth more fully in Toyota's reports to NHTSA pursuant to 49 CFR Part 573.These recalls are as follows:Recall 11V-112: (1) model year (MY) 2004-2006 Toyota Highlander and Highlander Hybrid; and, (2) MY 2004-2007 Lexus RX330,RX350, and RX400h (hybrid model). The total estimated population under this recall is 769,379 vehicles.This recall remedies potential accelerator pedal entrapment caused by a loose floor carpet cover (trim panel). Recall 11V-113: (1) MY 2003-2009 through 2009 Toyota 4Runner; (2) MY 2006-2010 Toyota RAV4; and, (3) MY 2008-2011 Lexus LX570.The total estimated population under this recall is 1,381,000 vehicles.This recall supplements recall 09V-388 and remedies potential accelerator pedal entrapment by an unsecured floor mat.Recall 11V-115: (1) MY 2006-2007 Lexus GS300 (all wheel drive vehicles); and, (2) MY 2006-2007 Lexus GS350 (all wheel drive vehicles). The total estimated population under this recall is 19,647 vehicles.This recall remedies potential accelerator pedal entrapment caused by inadequate clearance between the pedal linkage and a plastic pad embedded in the vehicle's carpet.II. Potential Electronic Causes of Unintended Acceleration.After NHTSA opened RQ10-003, NHTSA launched a ten-month study of potential electronic causes of unintended acceleration in Toyota vehicles.NHTSA launched the study in the spring of 2010 in light of concerns aired in Congressional hearings.NHTSA enlisted engineers at the National Aeronautics and Space Administration (NASA) with expertise in areas such as computer controlled electronic systems, electromagnetic interference and software integrity to assess whether electronic systems or electromagnetic interference played a role in incidents of unintended acceleration in Toyota vehicles.That study has concluded.Two reports are associated with the study and are available on NHTSA's website.NASA's report is entitled Technical Support to the National Highway Traffic Safety Administration (NHTSA) on the Reported Toyota Motor Corporation (TMC) Unintended Acceleration (UA) Investigation, NESC Assessment No. TI-10-00618 (Jan. 18, 2011).NHTSA's report is entitled Technical Assessment of Toyota Electronic Throttle Control (ETC) Systems (Feb. 2011).Both reports should be read in conjunction with each other. As stated in its report, NASA did not find an electronic cause of large throttle openings that can result in unintended acceleration incidents. NHTSA did not find a vehicle-based cause of unintended acceleration incidents other than the physical pedal interference causes that are being addressed by Toyota's recalls. This RQ is closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007456Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006162Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11005121Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11005063Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11003650To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11003648The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003643Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003642Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003641Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 11003595To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11003593The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003588Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003587Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003586Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 10214355Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
- 10209023TSB: Some 2005 ? 2022 model year Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10207945POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Lexus. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Lexus.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10205383Spots in Window Glass - vehicle exterior
- 10205352Windshield Wiper Blade Maintenance and cleaning
- 10205346Auto matic Transmission Replacement kPrecautions
- 10205331Immobilizer and Smart Key Reset
- 10179697TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.
- 10179601TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.
- 10177780TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. ST004-01, SU001-08, and L-SB-0174-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Lexus vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.
- 10176283Safety Recall and Service Campaign - Technician Certification Requirements
- 10174889TSB: OBSOLETE NOTICE April 06, 2020: This bulletin is now obsolete. Please see L-SB-0008-20. Replacement Certification Labels and VIN Plates
- 10174888TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.
- 10172827TSB: February 06, 2020: This bulletin is now obsolete. Please see L-SB-0003-20.
- 10164328TSB: REVISION NOTICE July 01, 2019 Rev1: G1668 Applicability has been updated to include 2019 ? 2020 model year Lexus vehicles. G2158 The Techstream Preparation and Process Overview sections have been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-SB-0021-14. G1765 Applicability has been updated to include applicable 2018 models and 2016 ? 2018 model year RC 300 and 2015 ? 2018 model year RC 350 vehicles. ? Applicability has been updated to exclude 2001 ? 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Lexus-specific control unit
- 10159694TSB: OBSOLETE NOTICE April 4, 2019: This bulletin is now obsolete. Please see L-SB-0017-19.
- 10133657TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90. Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Vehicle replacement certification labels (vinyl label installed on driver door or door post) and VIN lates (metal plate riveted to dashboard) may be available from Lexus, provided the request meets one of the criteria listed in this Service Bulletin.
- 10133651TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Lexus vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.
- 10132902TSB: REVISION NOTICE November 10, 2016 Rev1: ? Applicability has been updated to include 2015 ? 2017 model year applicable Lexus vehicles. ? The Parts Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2006 ? 2017 model year Lexus vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.
- 10132625TSB: Revision Notice: Applicability section has been updated to include 2016-2017 applicable model year Lexus vehicles. The Repair Procedure section, Required Tools & Equipment section, and the Repair Procedure section has been updated. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
- 10132074Beginning in 1998, Lexus introduced side airbags as optional equipment. Lexus does NOT recommend replacement of original seat covers with non-Lexus leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Lexus may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Lexus leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Lexus strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Lexus strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.
- 10131836TSB: REVISION NOTICE March 22, 2017 Rev2: ? Applicability has been updated to include 2016-2017 model year Lexus vehicles. ? February 11, 2015 Rev1: Applicability has been updated to include 2006 ? 2015 model year Lexus vehicles. On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat. The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. Use the following procedure to address this condition.
- 10129210TSB: OBSOLETE NOTICE January 22, 2018: This bulletin is now obsolete. Please see L-SB-0001-18.
- 10046239Lexus: illumination of malfunction indicator lamp (check engine light) may be exhibit, intermittently, under certain driving conditions, with rough idling, runs rough coming to stop or misfiring of engine after cold startup. Models 2006 gs300 and 2006-10 IS 250 and IS 250C.
- 10045639Lexus: precaution information on removal, inspection, installation of accelerator pedal sensor assembly, which requires no lubrication. Models 2001-13 ct200h, es300, 300H, 330, 350, gs300, 350, 450, 450H, 460, gx460, 470, hs250h, IS f, is250, 250C, 350, 350C, lfa, ls430, 460, 600H, lx470, 570, rx330, 350, 400H, 450H, sc430.
- 10039124Toyota: transmission or park/neutral switch installation information.
Every Lexus GS model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.