2007 Lexus GS
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2007 Lexus GS. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2007 Lexus GS. Newest first.
Toyota IS recalling certain model year 2006-2009 lexus IS and model year 2006-2007 lexus GS vehicles. due to insufficient tightening of the fuel pressure sensor connected to an engine fuel delivery pipe with nickel phosphorus plating, there IS a possibility that, over time, the pressure sensor could loosen. if loosening occurs, fuel could leak past a…
Risk and remedy
Risk
Fuel leakage, in the presence of an ignition source, could result in a fire.
Remedy
Dealers will inspect for fuel leakage from the threaded portion of the fuel pressure sensor and if a fuel leak IS not confirmed, dealers will further tighten the fuel pressure sensor with the proper torque. if a fuel leak IS confirmed, the gasket between the sensor and the fuel deliver pipe will be replaced with a new one, and the sensor will be tightened with the proper torque. this service will be performed free of charge. the safety recall began on march 7, 2011. owners may contact toyota at 1-800-331-4331.
Toyota IS recalling 214,570 my 2006-2008 lexus IS, my 2006-2007 GS and my 2007-2008 LS passenger vehicles equipped with aluminum fuel delivery pipes (fuel rails). ethanol fuels with a low moisture content will corrode the internal surface of the fuel rails. as this condition progresses, the engine malfunction indicator light may illuminate.
Risk and remedy
Risk
Over time, the corrosion may create a pinhole resulting in fuel leakage. Fuel leakage, in the presence of an ignition source, could result in a fire.
Remedy
Dealers will inspect and replace the fuel delivery pipes free of charge. the recall IS expected to begin during february 2009. owners may contact toyota/lexus at 1-800-255-3987.
Owner complaints
25 complaints2 involved a crash
What owners report most
Latest complaints
- Air bags · Structure › Body · Wheels
We were crossing under the light to go to the gas station and we believe the car that hit us ran a red light. It caused right rear damage and side airbags to deploy. There's a metal piece in the tire and its undriveable.
- Air bags
SRS Driver side knee air bag DTC B1861
- Visibility › Rearview mirrors/devices
The anti-reflective coating on the rear view mirror on the inside of the car is coming through the mirror causing black spots that obscure vision out the back of the car. This issue affects all 2006-2011 Lexus gs models. All oem replacements online have this happen to some degree. I bought this car…
The anti-reflective coating on the rear view mirror on the inside of the car is coming through the mirror causing black spots that obscure vision out the back of the car. This issue affects all 2006-2011 Lexus gs models. All oem replacements online have this happen to some degree. I bought this car a couple months ago, this was an issue from the day I bought it and most likely started many years prior in my specific model.
- Fuel system, gasoline
The contact owns a 2007 Lexus GS350. The contact stated that the vehicle hesitated to start and there was a fuel odor inside the vehicle. Additionally, the contact stated that the vehicle was jerking while driving. The check engine warning light was illuminated. The vehicle was taken to a local…
The contact owns a 2007 Lexus GS350. The contact stated that the vehicle hesitated to start and there was a fuel odor inside the vehicle. Additionally, the contact stated that the vehicle was jerking while driving. The check engine warning light was illuminated. The vehicle was taken to a local mechanic, where it was diagnosed with engine misfire and defective fuel injectors. The vehicle was repaired; however, the failure persisted. The contact referenced NHTSA Campaign Number: 20V012000 (Fuel System, Gasoline) however, the VIN was not included in the recall. The vehicle was not repaired. The manufacturer was not made aware of the failure. The approximate failure mileage was 170,000.
- Engine
My vehicle has been making noises on start-up and in time it makes the same knocking noise while idling. I brought my car to my mechanic and he says it’s my VVTI system failing and should be remedied under campaign 13V395000. The problem is holding Lexus accountable since it’s not an open recall…
My vehicle has been making noises on start-up and in time it makes the same knocking noise while idling. I brought my car to my mechanic and he says it’s my VVTI system failing and should be remedied under campaign 13V395000. The problem is holding Lexus accountable since it’s not an open recall under my VIN. I’ve contacted Lexus directly and confirmed this service was not completed. My VIN is listed on your site as being a potential for this issue. Please help, thanks.
- Engine
Oil consumption, I have to add 2 quarts every 1300 miles
- Engine
Because of the design, the rings stick causing oil consumption and engine wear. it smokes when driven. this affects these vehicles approximately years 06 - 11. They revamped the engine after 11 to fix the problem. they should repair our engines
- Engine
Low oil light came on 1000 miles after oil change at lexus dealership. Car was low 2.5 quarts of oil. Blue grey smoke was coming out of the car during acceleration and car smelled like poison inside very unsafe. Car has been dealer maintained for everything. Car was certified pre owned as well. At…
Low oil light came on 1000 miles after oil change at lexus dealership. Car was low 2.5 quarts of oil. Blue grey smoke was coming out of the car during acceleration and car smelled like poison inside very unsafe. Car has been dealer maintained for everything. Car was certified pre owned as well. At 100,000 miles oil consumption test was done and was in fact proved to be burning oil. Car IS burning way too much oil. I've had 4 other vehicles none have burned oil. This IS unacceptable and I might have to buy a new engine soon. Please help me out. Thank you.
- Steering
No power steering
- Visibility/wiper
Auto dimming glass has started to deteriate causing black streaks and impairing visibility. This IS don't a surface level scratch, this IS underneath the glass and a faulty product.
- Air bags
Showing airbag alert lighting on dashboard
- Air bags
Drivers side knee airbag reporting codes of short in squib circuit which comes and goes. Airbag light IS on when active. also randomly reports a code with open in squib circuit which also comes and goes. History reports has the codes active and clear. codes are present and will not clear at this…
Drivers side knee airbag reporting codes of short in squib circuit which comes and goes. Airbag light IS on when active. also randomly reports a code with open in squib circuit which also comes and goes. History reports has the codes active and clear. codes are present and will not clear at this time. this IS happening in all scenario's of movement and parked conditions. codes are still present when started in the morning after being parked overnight.
- Exterior lighting
Left low beam headlight intermittently turn off. Need to turn off headlight for brief period causing a safety hazard in order for both headlights to turn back on. Seems to be known problem with this particular year/model.
- Visibility/wiper
Inner rear view mirror discoloration including black streaks and spots make it impossible to safely observe behind vehicle. Lexus has an internal "secret" safety tsib l-sb-0043-16 but refuses to acknowledge it or perform a repair, claiming it IS not the subject of a official recall. This IS a known…
Inner rear view mirror discoloration including black streaks and spots make it impossible to safely observe behind vehicle. Lexus has an internal "secret" safety tsib l-sb-0043-16 but refuses to acknowledge it or perform a repair, claiming it IS not the subject of a official recall. This IS a known issue for many lexus owners and IS widespread across numerous lexus models over the years of 2006 through 2009 and includes gs300, gs350, gs430, gs450h and gs460. I called the "lexus guest experience center" at their 800 number and they were evasive and combative with absolutely one goal in mind: no safety issue will be covered without being forced into coverage through a recall even though the service bulletin clearly covers the vin of my 2007 gs350 and clearly identifies the defective mirror. Searches across the internet show many complaints by owners of lexus refusing to fix this defective mirror. https://repairpal.com/the-inside-rear-view-mirror-may-become-discolored-857 https://repairpal.com/the-inside-rear-view-mirror-may-become-discolored-318 https://www.clublexus.com/forums/gs-3rd-gen-2006-2011/735645-black-scratches-on-rear-view-mirror.html https://www.clublexus.com/forums/is-2nd-gen-2006-2013/652097-about-black-spots-on-rearview-mirror-2.html https://www.clublexus.com/forums/gs-3rd-gen-2006-2011/556707-rearview-mirror-question.html
- Unknown or other
Torque converter clutch pressure control solenoid issue
- Unknown or other · Visibility/wiper
Rear view mirror IS being discolored with black spots
- Electrical system › Wiring › Fuses and circuit breakers · Exterior lighting
TL* the contact owns a 2007 lexus gs350. During rainy weather or while the vehicle was at a car wash, water would leak into the headlight casing. The issue caused the fuses to fail. The vehicle was taken to a dealer where the headlights were replaced; however, the failure recurred. The manufacturer was not notified of the failure. The vin was unknown. The approximate failure mileage was 45,000.
- Exterior lighting
Passenger side headlight intermittently stops working while in motion and/or stopped. Trusted repair shop said headlight ballast IS bad and that the driver's side ballast IS starting to make noise as if it IS going bad as well. They have repaired many lexus cars with this problem. This IS a known…
Passenger side headlight intermittently stops working while in motion and/or stopped. Trusted repair shop said headlight ballast IS bad and that the driver's side ballast IS starting to make noise as if it IS going bad as well. They have repaired many lexus cars with this problem. This IS a known issue on this year, make and model of the car. In some cases, drivers have had both headlights shut off at once. Lexus requires a complete headlight assembly to replace the bad ballast, a cost of over $2500 for both sides. Given that this IS a known problem and potentially dangerous should both headlights shut off at the same time while driving at night, I was surprised to find that there has never been a recall for this problem.
- Electrical system · Hybrid propulsion system
TL* the contact owns a 2007 lexus GS. While reversing at approximately 3 mph, the contact struck a pole. There were no injuries. The vehicle stalled and would not start and the check hybrid indicator illuminated. The vehicle restarted after 40 minutes, but the warning indicator was still…
TL* the contact owns a 2007 lexus GS. While reversing at approximately 3 mph, the contact struck a pole. There were no injuries. The vehicle stalled and would not start and the check hybrid indicator illuminated. The vehicle restarted after 40 minutes, but the warning indicator was still illuminated. The vehicle was driven to the contact's residence and the warning indicator was no longer illuminated. The dealer diagnosed that the hybrid battery was faulty and needed replacement. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 102,000.
- Visibility/wiper
Rear view mirror defective : scratched and dis colored
- Service brakes
The lexus dealer once again (the first instance was in december 2013 at 45,533 miles and required replacement of pads and rotors.) reported during routine maintenance that the rear brake caliper pins were seized and had to be cleaned and lubricated (neither action IS a lexus scheduled preventive…
The lexus dealer once again (the first instance was in december 2013 at 45,533 miles and required replacement of pads and rotors.) reported during routine maintenance that the rear brake caliper pins were seized and had to be cleaned and lubricated (neither action IS a lexus scheduled preventive maintenance activity.). as in the first instance, it IS fortunate that no accident resulted from these seized calipers. *tr
- Engine
Heard pop from engine lost power. Was able to drive off highway at 10 miles per hour or less with engine banging. Made it to my mechanic who said that the engine rocker arm in cylinder 3 broke.lexus was no help, as my 5 year engine warrant expired. *tr
- Steering
As I was driving, all the sudden I had a difficult time to make turns. I noticed that the p/s light IS on. I have done some researches on the internet and I found out that several toyota & lexus vehicles have been recalled for power steering and emc failure problem. So when I contacted the…
As I was driving, all the sudden I had a difficult time to make turns. I noticed that the p/s light IS on. I have done some researches on the internet and I found out that several toyota & lexus vehicles have been recalled for power steering and emc failure problem. So when I contacted the dealer, they told me all the recall on my vehicle has been done and there IS no emc failure recall at this moment. but there was a emc recall on the previous year model. I assume that they might be using the same parts on my car and that should be recalled as well. *tr
- Service brakes
The brakes always make alot of noise and just hate the car. *tr
- Exterior lighting
Both headlights went out while driving in the rain at night. I am told this IS a very common problem, water gets into the sealed head lamp and shorts out the balist. *Tr I was almost hit as another car pulled out in front of me before I realized both head lights had shorted out. they turn back on once reset but go out with out warning.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Unintended and Uncontrolled Acceleration
On February 16, 2010, NHTSA's Office of Defects Investigation (ODI) opened RQ10-003 to determine whether the scope of prior Toyota recalls relating to potential unintended acceleration were sufficiently broad, including, among others, Toyota recalls 07E-082, 09V-388, 10V-017, and 10V-023.NHTSA also requested…
On February 16, 2010, NHTSA's Office of Defects Investigation (ODI) opened RQ10-003 to determine whether the scope of prior Toyota recalls relating to potential unintended acceleration were sufficiently broad, including, among others, Toyota recalls 07E-082, 09V-388, 10V-017, and 10V-023.NHTSA also requested information regarding potential electronic causes of unintended acceleration in Toyota and Lexus vehicles.I. Pedal Interference from Floor mats, Carpet Covers and Plastic Pads in Carpets.During the RQ10-003 investigation, ODI reviewed a large volume of documents to assess whether additional vehicles should be recalled.Following the agency's analysis, NHTSA requested that Toyota recall additional vehicles.Toyota complied with the agency's request.The details of these recalls are set forth more fully in Toyota's reports to NHTSA pursuant to 49 CFR Part 573.These recalls are as follows:Recall 11V-112: (1) model year (MY) 2004-2006 Toyota Highlander and Highlander Hybrid; and, (2) MY 2004-2007 Lexus RX330,RX350, and RX400h (hybrid model). The total estimated population under this recall is 769,379 vehicles.This recall remedies potential accelerator pedal entrapment caused by a loose floor carpet cover (trim panel). Recall 11V-113: (1) MY 2003-2009 through 2009 Toyota 4Runner; (2) MY 2006-2010 Toyota RAV4; and, (3) MY 2008-2011 Lexus LX570.The total estimated population under this recall is 1,381,000 vehicles.This recall supplements recall 09V-388 and remedies potential accelerator pedal entrapment by an unsecured floor mat.Recall 11V-115: (1) MY 2006-2007 Lexus GS300 (all wheel drive vehicles); and, (2) MY 2006-2007 Lexus GS350 (all wheel drive vehicles). The total estimated population under this recall is 19,647 vehicles.This recall remedies potential accelerator pedal entrapment caused by inadequate clearance between the pedal linkage and a plastic pad embedded in the vehicle's carpet.II. Potential Electronic Causes of Unintended Acceleration.After NHTSA opened RQ10-003, NHTSA launched a ten-month study of potential electronic causes of unintended acceleration in Toyota vehicles.NHTSA launched the study in the spring of 2010 in light of concerns aired in Congressional hearings.NHTSA enlisted engineers at the National Aeronautics and Space Administration (NASA) with expertise in areas such as computer controlled electronic systems, electromagnetic interference and software integrity to assess whether electronic systems or electromagnetic interference played a role in incidents of unintended acceleration in Toyota vehicles.That study has concluded.Two reports are associated with the study and are available on NHTSA's website.NASA's report is entitled Technical Support to the National Highway Traffic Safety Administration (NHTSA) on the Reported Toyota Motor Corporation (TMC) Unintended Acceleration (UA) Investigation, NESC Assessment No. TI-10-00618 (Jan. 18, 2011).NHTSA's report is entitled Technical Assessment of Toyota Electronic Throttle Control (ETC) Systems (Feb. 2011).Both reports should be read in conjunction with each other. As stated in its report, NASA did not find an electronic cause of large throttle openings that can result in unintended acceleration incidents. NHTSA did not find a vehicle-based cause of unintended acceleration incidents other than the physical pedal interference causes that are being addressed by Toyota's recalls. This RQ is closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007456Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11006162Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11005121Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11005063Some 2005 2024 Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
- 11003650To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11003648The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003643Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003642Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003641Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 11003595To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11003593The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Lexus paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain, frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. BO029-91. The entire bulletin has been updated. Service Bulletin No. BO029-91 is obsolete
- 11003588Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Lexus vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003587Lexus vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination. Follow the Removal Procedure in this bulletin to remove the RapgardTM protective film within 90 days from initial application. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-PG004-94. The entire bulletin has been updated.
- 11003586Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid. Follow the Repair Procedure in this bulletin to clean vehicles that may have been subjected to contamination by airborne iron particles such as rail dust during rail transportation or extended storage near industrial areas.
- 10214355Lexus Safety Recall and Service Campaign - Technician Certification Requirements 4.13.2022
- 10209023TSB: Some 2005 ? 2022 model year Lexus vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
- 10207945POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Lexus. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Lexus.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10205383Spots in Window Glass - vehicle exterior
- 10205352Windshield Wiper Blade Maintenance and cleaning
- 10205346Auto matic Transmission Replacement kPrecautions
- 10205331Immobilizer and Smart Key Reset
- 10190468Lexus Safety Recall and Service Campaign - Technician Certification Requirements
- 10179697TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.
- 10179601TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address this condition.
- 10177780TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. ST004-01, SU001-08, and L-SB-0174-08. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Be sure to review the entire content of this service bulletin before proceeding. This Service Bulletin provides best practice procedures for vehicle pulling complaint, diagnosis, and repair for 2002 ? 2021 model year Lexus vehicles. This information supplements Repair Manual procedures when the symptoms are: ?Vehicle Pulling: The vehicle moves to the right or left when the driver holds the steering wheel while driving straight ahead without exerting steering effort. ?Steering Wheel Off Center: The vehicle travels straight, but the steering wheel is not pointed straight ahead. The vehicle is not pulling. Before repairing a vehicle pulling to one side, it is necessary to clearly identify the cause of the pulling condition. Frequently, pulling to one side is diagnosed as a wheel alignment concern. However, the actual cause may be related to the lateral force generated by the tires, vehicle damage, road crown or worn components. Performing a wheel alignment when tire force is the cause could result in the wheel alignment being set at a value outside of specifications. This could then cause other problems such as uneven tire wear, etc. A customer may notice a pull to the left when in the left lanes of travel and notice a pull to the right or no pull when traveling in the right lanes of travel on the very same section of roadway. This road crown effect is environmental and cannot be corrected with suspension adjustments or any other wheel or tire modification discussed in this bulletin.
- 10176283Safety Recall and Service Campaign - Technician Certification Requirements
- 10174889TSB: OBSOLETE NOTICE April 06, 2020: This bulletin is now obsolete. Please see L-SB-0008-20. Replacement Certification Labels and VIN Plates
- 10174888TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, PG002-90, L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003 93, and PG002-90. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1990 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin.
- 10172827TSB: February 06, 2020: This bulletin is now obsolete. Please see L-SB-0003-20.
- 10164328TSB: REVISION NOTICE July 01, 2019 Rev1: G1668 Applicability has been updated to include 2019 ? 2020 model year Lexus vehicles. G2158 The Techstream Preparation and Process Overview sections have been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. L-SB-0021-14. G1765 Applicability has been updated to include applicable 2018 models and 2016 ? 2018 model year RC 300 and 2015 ? 2018 model year RC 350 vehicles. ? Applicability has been updated to exclude 2001 ? 2003 model year ES 300 vehicles. Service Bulletin No. L-SB-0021-14 is obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Flash reprogramming allows the Electronic Control Unit (ECU) software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines the use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information. NOTE ECU is a Lexus term used to describe integrated computerized devices responsible for managing the operation of a system or subsystem. For the purposes of this bulletin, the term ECU is used as a generic label for the following SAE J1930 standard references: ? Powertrain Control Module (PCM) ? Engine Control Module (ECM) ? Transmission Control Module (TCM) ? Any other Lexus-specific control unit
- 10159694TSB: OBSOLETE NOTICE April 4, 2019: This bulletin is now obsolete. Please see L-SB-0017-19.
- 10133657TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90. Service Bulletin Nos. L-SB-0048-08, PG007-07, PG016-01, PG015-01, PG004-97, PG003-97, PG003-93, and PG002-90 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. Vehicle replacement certification labels (vinyl label installed on driver door or door post) and VIN lates (metal plate riveted to dashboard) may be available from Lexus, provided the request meets one of the criteria listed in this Service Bulletin.
- 10133651TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Lexus vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.
- 10132902TSB: REVISION NOTICE November 10, 2016 Rev1: ? Applicability has been updated to include 2015 ? 2017 model year applicable Lexus vehicles. ? The Parts Information section has been updated. Any previous printed versions of this bulletin should be discarded. Some 2006 ? 2017 model year Lexus vehicles may exhibit odors naturally occurring from the HVAC system and/or related environmental factors. Although there is no way to eliminate these odors, follow the General Procedure in this bulletin to minimize the odors experienced.
- 10132625TSB: Revision Notice: Applicability section has been updated to include 2016-2017 applicable model year Lexus vehicles. The Repair Procedure section, Required Tools & Equipment section, and the Repair Procedure section has been updated. Flash reprogramming allows the ECU software to be updated without replacing the ECU. Flash calibration updates for specific vehicle models/ECUs are released as field-fix procedures described in individual Service Bulletins. This bulletin details the Techstream ECU flash reprogramming process and outlines use of the Technical Information System (TIS) and the Calibration Update Wizard (CUW). Flash calibration updates can only be applied to the vehicle/ECU combination for which they are intended. ECUs have internal security that will not allow them to be programmed with another ECU?s information.
- 10132074Beginning in 1998, Lexus introduced side airbags as optional equipment. Lexus does NOT recommend replacement of original seat covers with non-Lexus leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Lexus may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Lexus leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Lexus strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Lexus strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.
- 10131836TSB: REVISION NOTICE March 22, 2017 Rev2: ? Applicability has been updated to include 2016-2017 model year Lexus vehicles. ? February 11, 2015 Rev1: Applicability has been updated to include 2006 ? 2015 model year Lexus vehicles. On some vehicles, when Rapgard? is removed, the paint may have a stained appearance. These stains appear to be under the clear coat. The stain patterns are usually under wrinkles in the Rapgard?. These wrinkles sometimes trap water and cause the paint to stain from the trapped moisture, especially on horizontal surfaces, such as the hood, roof and trunk. Stains can be removed by heating the stained surface to remove the trapped moisture. Use the following procedure to address this condition.
- 10129210TSB: OBSOLETE NOTICE January 22, 2018: This bulletin is now obsolete. Please see L-SB-0001-18.
- 10045639Lexus: precaution information on removal, inspection, installation of accelerator pedal sensor assembly, which requires no lubrication. Models 2001-13 ct200h, es300, 300H, 330, 350, gs300, 350, 450, 450H, 460, gx460, 470, hs250h, IS f, is250, 250C, 350, 350C, lfa, ls430, 460, 600H, lx470, 570, rx330, 350, 400H, 450H, sc430.
- 10039124Toyota: transmission or park/neutral switch installation information.
Every Lexus GS model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.