2016 Mack Cxu
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2016 Mack Cxu. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
1 recall names the 2016 Mack Cxu. Newest first.
Mack Trucks, Inc. (Mack) is recalling certain model year 2015 and 2016 CXU and LEU trucks manufactured May 20, 2014, to March 24, 2015, equipped with certain Haldex Life Seal Type 30/30 Long Stroke Air Brake Actuators manufactured from January 9, 2014, through February 3, 2015. The affected actuators may have an incomplete attachment of the internal rubber…
If the diaphragm is not completely attached, there may be internal leakage from the service section past the diaphragm, potentially trapping air pressure in the parking brake section. This air pressure in turn, if not vented, may prevent full release of the actuator unit, and may induce brake drag and may result in overheated wheelend service brakes, increasing the risk of a fire.
Mack will notify owners, and dealers will inspect the brake actuator and replace, as necessary, free of charge. The recall began March 20, 2015. Owners may contact Mack customer service at 1-610-709-2131. Mack's number for this recall is SC0387.
Second occurrence of below happening, first time being 11/28/25, and most recently 11/05/25. Clutch engaged uncommanded while stopped with service brakes engaged. Truck kept trying to power through the service brakes until it was forcefully stalled out with service brakes. Truck is start-able immediately afterwards, but not drivable with engine stop warning lamp illuminated and a error message "Neutral Gear Not Secured" Nearly rear ended a stopped vehicle in front of truck, so yeah, slight safety concern of uncommanded movement of vehicle. Has not been looked at by independent shop or manafacterer, nothing has been inspected, mechanics within company vehicle is operated by currently researching into problem and waiting for stated problem to occur again. Refrencing a previous investigation here that i believe is related; PE 20-005
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
On April 28, 2020, the Office of Defects Investigation (ODI) opened PE20-005 to investigate reports of 2013-2015 Mack CHU and CXU trucks equipped with mDrive transmissions continuing to push forward when stopping, possibly increasing the risk of a crash. After more field reports were discovered, the scope of the investigation was expanded to cover MY 2013-2016 vehicles. The mDrive transmission is Mack's version of Volvo's I-Shift transmission, an automated manual transmission that allows gear shifting without the use of a clutch pedal. Early I-Shift transmissions were recalled (13V-268) to address a missing redundant clutch disengagement switch that could prevent the clutch from automatically disengaging when the brake was applied. If a loss of signal from the brake air pressure switch occurred, the clutch would remain engaged while braking.Although Mack's mDrive transmission adopted the latest Volvo I-Shift design and was built with the redundant clutch switch, ODI received field reports alleging that the mDrive transmission would not disengage when coming to a stop like the Volvo I-Shift transmissions in recall 13V-268.After more than a year of information requests, data exchanges and grouping, and analyzing data, ODI was able to correlate two versions of transmission software (ID 23084009 and ID 23084004), with two frequently replaced parts ('solenoid valve' and 'cylinder assy clutch') as outliers. However, Mack dismissed the replacement parts as being normal service parts for worn clutch systems.According to Mack, unlike the I-Shift recall, loss of one or more of the switches would not keep the clutch engaged but might cause a delay in the clutch disengaging, possibly due to the software/control system settings, the worn parts and system reaction time.To demonstrate the possible switch failure outcomes, Mack outfitted a subject model truck with a panel that could disable each switch on command. During test drives at the Mack facility, the demonstrator truck stopped when the brake was applied each time, and the truck did not stall when the brake was applied, even when the clutch was engaged. Even though failure of one of the switches could delay clutch disengagement, the stopping distance would still be shorter than one of the recalled Volvo I-Shift transmission trucks. With this information, as well as a lack of known crash incidents related to this complaint, ODI concludes that the Mack vehicles do not present an unreasonable risk to motor vehicle safety. Although ODI is closing this PE, Mack/Volvo should continue improving the transmission control unit software to further refine the clutch disengagement strategy. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. Claims are still being submitted and the Agency will continue to monitor the issue and reserves the right to take further action if warranted by new circumstances.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.