2016 Mazda CX-5
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mazda › CX-5 › 2016
These records cover every 2016 Mazda CX-5. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2016 Mazda CX-5. Newest first.
Mazda North American Operations (Mazda) is recalling certain 2016 CX-5 vehicles. The LED Daytime Running Lights (DRL) may fail while driving.
Risk and remedy
Risk
If the DRL fails, the vehicle's visibility may be reduced to other drivers on the road, increasing the risk of a crash.
Remedy
Mazda will notify owners, and dealers will inspect the headlights, and replace the sealing gasket or headlight assemblies, as necessary, free of charge. The recall began March 20, 2020. Owners may contact Mazda customer service at 1-800-222-5500 Option 4. Mazda's number for this recall is 4320A.
Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15…
Risk and remedy
Risk
If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
Remedy
Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31…
Risk and remedy
Risk
If the steering knuckle separates from the strut assembly, it can cause a loss of steering control, increasing the risk of a crash.
Remedy
Mazda will notify owners, and dealers will inspect the lower mounting nuts and bolts that secure the front strut assembly to the steering knuckle. If the bolts are loose, they will be replaced and then correctly tightened, free of charge. The recall is expected to begin May 20, 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9316D.
Mazda North American Operations (Mazda) is recalling certain model year 2014-2016 Mazda CX-5 vehicles manufactured June 27, 2013, to February 2, 2016. The affected vehicles have a fuel filler pipe that may rupture in the event of a crash. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number…
Risk and remedy
Risk
A rupture of the fuel filler pipe may result in a fuel leak, increasing the risk of a fire.
Remedy
Mazda will notify owners, and dealers will alter the attachment between the fuel filler pipe and the left rear side of the bracket of the fuel filler pipe, free of charge. The recall began on February 25, 2016. Owners may contact Mazda customer service at 1-800-222-5500, option 6. Mazda's number for this recall is 9216B.
Pilkington North America, Inc. (Pilkington) is recalling certain replacement windshields, model FW04026 GTY, manufactured November 23, 2015, to December 16, 2015 for use in Mazda CX-5 vehicles that are equipped with the Smart City Brake Support system. The affected windshields have a bracket mounted on the inside to hold a laser sensor or LIDAR device for…
Risk and remedy
Risk
If the bracket loosens or detaches from the windshield, the safety features of the Smart City Brake Support system may be disabled and therefore increase the risk of a crash.
Remedy
Pilkington will contact the wholesalers and retailers that purchased the windshields to try to identify the affected customers. The affected windshields will be replaced, free of charge. This recall began on February 15, 2016. Owners may contact Pilkington at 1-844-278-7230.
Owner complaints
512 complaints31 involved a crash10 involved a fire13 injuries
What owners report most
Latest complaints
- Electrical system · Visibility/wiper
My windshield wipers stopped working completely. I am unable to see out my front window properly while its raining. Yes the dealership said that my front body control module needs to be replaced which is the same issue that other Mazdas from the same era have had safety recalls for (nhtsa campaign…
My windshield wipers stopped working completely. I am unable to see out my front window properly while its raining. Yes the dealership said that my front body control module needs to be replaced which is the same issue that other Mazdas from the same era have had safety recalls for (nhtsa campaign 19v272000). No it hasn't been inspected by anyone other than a Mazda dealership. The front wipers slowly stopped working. First the highest setting didn't work at all, then the wipers would work sporadically, and now they don't work at all.
- Seats
I own a 2016 Mazda CX-5 Grand Touring and discovered two brown, burn-like marks on the lower seatback of a heated front seat. I suspect the seat heater overheated and damaged the upholstery. The discoloration is concentrated in the lower back/lumbar area, and I have photographs documenting it. I…
I own a 2016 Mazda CX-5 Grand Touring and discovered two brown, burn-like marks on the lower seatback of a heated front seat. I suspect the seat heater overheated and damaged the upholstery. The discoloration is concentrated in the lower back/lumbar area, and I have photographs documenting it. I am concerned that continued use could cause further overheating, burns to an occupant, or a fire. I am reporting this as a seat-heater safety defect and requesting investigation.
- Suspension
Rear subframe corrosion on this vehicle. I am in a winter road salt region, the materials used for this vehicle's subframe are not compatible with consistent driving in this region. Similar vehicles (not mine?) were subject to a recall for the front subframe, but nothing for the rear. This rear…
Rear subframe corrosion on this vehicle. I am in a winter road salt region, the materials used for this vehicle's subframe are not compatible with consistent driving in this region. Similar vehicles (not mine?) were subject to a recall for the front subframe, but nothing for the rear. This rear subframe issues caused multiple failures of virtually every component of the rear suspension - control arms, rear springs, etc. The repair cost for JUST the subframe was $3813. Not repairing it was not an option - the vehicle had failed mandatory State of Maine inspection (a safety thing, if I'm not mistaken). This should be a Mazda problem, not a me problem. I contacted Mazda USA about this issue and got no response.
- Suspension
Rear subframe corrosion on this vehicle. I am in a winter road salt region, the materials used for this vehicle's subframe are not compatible with consistent driving in this region. Similar vehicles (not mine?) were subject to a recall for the front subframe, but nothing for the rear. This rear…
Rear subframe corrosion on this vehicle. I am in a winter road salt region, the materials used for this vehicle's subframe are not compatible with consistent driving in this region. Similar vehicles (not mine?) were subject to a recall for the front subframe, but nothing for the rear. This rear subframe issues caused multiple failures of virtually every component of the rear suspension - control arms, rear springs, etc. The repair cost for JUST the subframe was $3813. Not repairing it was not an option - the vehicle had failed mandatory State of Maine inspection (a safety thing, if I'm not mistaken). This should be a Mazda problem, not a me problem. I contacted Mazda USA about this issue and got no response.
- Electrical system · Service brakes
The contact owns a 2016 Mazda CX-5. The contact stated while driving at an undisclosed speed, the electric parking brake module warning light was illuminated and the "Brake failure. Vehicle unsafe to drive," message was displayed on the instrument panel. The vehicle was taken back to the residence.…
The contact owns a 2016 Mazda CX-5. The contact stated while driving at an undisclosed speed, the electric parking brake module warning light was illuminated and the "Brake failure. Vehicle unsafe to drive," message was displayed on the instrument panel. The vehicle was taken back to the residence. The failure occurred on several different occasions. The contact expressed concern that the brakes could engage while the vehicle was in motion. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The failure mileage was approximately 84,000.
- Electrical system · Unknown or other
Repeated Failure and Rebooting of Mazda Connect Infotainment System I am the owner of a 2016 Mazda CX-5. The factory Mazda Connect infotainment system has developed a recurring defect in which the system repeatedly reboots to the Mazda logo while driving. Prior to complete failure, the navigation…
Repeated Failure and Rebooting of Mazda Connect Infotainment System I am the owner of a 2016 Mazda CX-5. The factory Mazda Connect infotainment system has developed a recurring defect in which the system repeatedly reboots to the Mazda logo while driving. Prior to complete failure, the navigation system became intermittent and Bluetooth connectivity frequently disconnected, requiring repeated attempts to reconnect devices. The system now continuously cycles through the startup screen, making navigation, hands-free phone functions, and system settings inaccessible. These repeated reboots occur while the vehicle is in motion and are distracting to the driver. The flashing and rebooting screen repeatedly draws the driver's attention away from the road and interferes with the use of navigation and hands-free communication features that are intended to promote safe driving. After researching this issue, I found numerous reports from other Mazda owners experiencing the same symptoms involving the Mazda Connect system, navigation SD card, and Connectivity Master Unit (CMU). The frequency and similarity of these reports suggest that this is a widespread and well-known defect rather than an isolated incident. Because this defect affects driver attention and the safe operation of the vehicle's communication and navigation functions, I respectfully request that Mazda and the National Highway Traffic Safety Administration investigate this matter and require Mazda to issue a recall or establish a repair program for affected vehicles. Vehicle: 2016 Mazda CX-5 Mileage: 70k
- Electrical system
The contact owns a 2016 Mazda CX-5. The contact stated that while driving 70 MPH with the cruise control activated, the cruise control cancellation switch failed to operate as intended after several attempts or while depressing the brake pedal. No warning light was illuminated. In addition, the…
The contact owns a 2016 Mazda CX-5. The contact stated that while driving 70 MPH with the cruise control activated, the cruise control cancellation switch failed to operate as intended after several attempts or while depressing the brake pedal. No warning light was illuminated. In addition, the contact was able to deactivate the cruise control using the main cruise control power switch. The vehicle was taken to a local dealer to be diagnosed; however, the cause of the failure was not yet determined. The vehicle was not repaired. The manufacturer was made aware of the failure by the local dealer. The failure mileage was approximately 91,000.
- Electrical system · Unknown or other
In 2024 I started having problems with my battery replaced it 3 times last time with a Mazda battery per Mazda advice. The car started to jerk while driving took it back to Mazda said it could be fuel injectors. They cleaned them and problem persists. Took it back they cleaned purve valve and then…
In 2024 I started having problems with my battery replaced it 3 times last time with a Mazda battery per Mazda advice. The car started to jerk while driving took it back to Mazda said it could be fuel injectors. They cleaned them and problem persists. Took it back they cleaned purve valve and then I broke down while leaving on [XXX] . Called service dept called police since it was in the middle of the blvd. And in traffic. We were lucky no one hit us. They took my car gave me a loaner had it for 10 days. Couldn’t find any problems. Then in 4/2025 it completely died at my home I called Mazda they were able to jump the battery and had it for a month. Couldn’t find any problem. And now we are in 5/2026 my car was in my drive without out being driven for 3 days and now is dead once again. But it is so dead that I cannot open with fob and dash board is black. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Engine · Engine and engine cooling › Exhaust system › Emission control › Catalytic convertor
The contact owns a 2016 Mazda CX-5. The contact stated that the engine light illuminated. The vehicle was taken to an independent mechanic diagnosed with a sensor failure and needing to replace a catalytic converter. The oxygen sensors were repalced.r was replaced by an independent mechanic.…
The contact owns a 2016 Mazda CX-5. The contact stated that the engine light illuminated. The vehicle was taken to an independent mechanic diagnosed with a sensor failure and needing to replace a catalytic converter. The oxygen sensors were repalced.r was replaced by an independent mechanic. The vehicle stalled while reversing. The manufacturer was not notified of the issue. The approximate failure mileage was 131,860.
- Visibility/wiper
(I am the owner of the car and am filling this out for my daughter who was driving it at the time, I was not with her during the incident) While driving down the road in the rain the wipers just stopped working. I have not had any dealers ID the specific problem yet. We replaced the wiper 20amp…
(I am the owner of the car and am filling this out for my daughter who was driving it at the time, I was not with her during the incident) While driving down the road in the rain the wipers just stopped working. I have not had any dealers ID the specific problem yet. We replaced the wiper 20amp fuse and it did not fix the problem. There were no warning lamps and there are still no warning lamps. My safety was put into danger when I could not see out the window. I was nearly at work so I waited for the rain to slow down some was able to make it to work. The rain cleared while I was at work and it has not rained since. It is available for inspection upon request.
- Power train
Any time the vehicle has been sitting with the engine off and has been given enough time to “cool down”, upon starting the vehicle and switching from PARK to DRIVE, the vehicle will violently lurch forward while attempting to reach 2nd gear. This is dangerous behavior that is not normal for any…
Any time the vehicle has been sitting with the engine off and has been given enough time to “cool down”, upon starting the vehicle and switching from PARK to DRIVE, the vehicle will violently lurch forward while attempting to reach 2nd gear. This is dangerous behavior that is not normal for any vehicle. There is clearly something wrong with either the transmission or the way the software communicates with the transmission. When the engine is within normal temperature it doesn’t display this dangerous behavior. A similar TSB was issued for the 2nd generation of CX5s but not for this generation of CX5s
- Steering · Suspension
I was slowly turning left into an alley when I heard a loud noise, the front of my car dropped, and the car immediately stopped and was immovable. Upon getting out of the car, it appears some joint separated from the wheel.
- Engine · Fuel/propulsion system · Vehicle speed control
My wife was driving our 2016 Mazda CX-5, and was getting ready to pull into our daughters' driveway. My wife slowed down to a stop before entering the driveway. She gave the vehicle some gas to move forward. She stated that there was a pause, then the vehicle accelerated forward slamming into the…
My wife was driving our 2016 Mazda CX-5, and was getting ready to pull into our daughters' driveway. My wife slowed down to a stop before entering the driveway. She gave the vehicle some gas to move forward. She stated that there was a pause, then the vehicle accelerated forward slamming into the garage door and the corner of the garage/house. There was also a Tesla parked inside the garage that was knocked back about a foot and a half. The distance from the edge of driveway and street to the garage door is about 27 feet. This happened at 1:30 PM. The weather conditions were great, sunny and dry. Thankfully, no one was hurt. If my wife was another foot to the right, she would have hit the support post for the upper balcony, and there would have been a good chance of the balcony falling on top of her. Or, if someone was standing in front of my wife when she entered the driveway, they could have seriously been hurt! There were no warning lights on prior to the accident. This happened last Sunday, April 19, 2026. We had the car towed to a local body shop on the same day as the accident. The vehicle was towed away the very next day to our insurance company's salvage lot in Bakersfield. I do have all the information, address and phone number, of the lot where our car was towed to. Hopefully, the car can still be inspected by the proper authorities. Thank you for your time!
- Power train › Driveline › Constant velocity joint · Service brakes, hydraulic › Foundation components › Disc › Caliper
The contact owns a 2016 Mazda CX-5. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the vehicle, and the message “Smart Brake Malfunction” was displayed. The vehicle was taken to an independent mechanic, where it was diagnosed with catastrophic…
The contact owns a 2016 Mazda CX-5. The contact stated that while driving at an undisclosed speed, there was an abnormal sound coming from the vehicle, and the message “Smart Brake Malfunction” was displayed. The vehicle was taken to an independent mechanic, where it was diagnosed with catastrophic brake caliper failure. The contact was unsure if the vehicle needed to be repaired. The vehicle was then taken to the dealer, where it was diagnosed, and it was determined that the passenger’s side inner CV joint had failed and needed to be replaced. The vehicle was not repaired. The dealer informed the contact that the vehicle could not be driven due to the severe failure. The manufacturer was not made aware of the failure. The approximate failure mileage was 125,385.
- Fuel/propulsion system
High pressure fuel pump has been replaced twice in less than a year. Car has less than 100,000 miles. Both times the fuel pump went out while driving, causing loss of acceleration and stalling of vehicle. Had to be towed to shop both times.
- Engine
Vehicle was taken to an authorized Mazda dealership for 60,000-mile service; coolant system drained and refilled. Immediately after service, check engine light illuminated (P011A – engine coolant temperature sensor correlation issue). Dealership retained vehicle, drove ~300 miles, performed a…
Vehicle was taken to an authorized Mazda dealership for 60,000-mile service; coolant system drained and refilled. Immediately after service, check engine light illuminated (P011A – engine coolant temperature sensor correlation issue). Dealership retained vehicle, drove ~300 miles, performed a second coolant flush; issue persisted. Dealer determined heater core clogged, attributed to coolant contamination/corrosion introduced during service. Another CX-5 at the same dealership experienced the same issue. Safety Concerns: Heater and coolant system failure may affect cabin comfort and engine temperature monitoring. Occurred immediately after authorized service, suggesting procedural or system-related defect. Noted in Mazda Technical Service Bulletin 07-007/19 as a known issue. Attempts at Resolution: Mazda offered partial goodwill assistance (~$775–$875) and assigned partial responsibility to the customer. Multiple attempts to escalate with Mazda Customer Experience (Case manager Betty) have not resulted in a satisfactory resolution. Dublin Mazda dealership service department, Mr. Frank Gozales (866-502-9912) mentioned original coolant by Mazda has caused this issue on 2016, and 2017 Mazda CX5 and is Mazda problem. I am requesting NHTSA review of this issue for potential defect or safety investigation.
- Back over prevention › Sensing system › Camera · Electrical system
My screen begins to change the display without me touching it. It has interrupted my GPS directions, causing me to get lost. It has gotten worse over time, now causing my back up camera to either not display at all or become partially blocked by another application randomly starting on the screen.…
My screen begins to change the display without me touching it. It has interrupted my GPS directions, causing me to get lost. It has gotten worse over time, now causing my back up camera to either not display at all or become partially blocked by another application randomly starting on the screen. My emergency brake lights flash on my dash, and auto technicians tell me it is a malfunction with the electrical system, not something in my brake system that needs to be replaced. We have tried that. These problems I have been told are not the responsibility of the manufacturer. I don’t understand why. It is distracting, alarming, and because it is getting more frequent with more systems being affected, it puts the driver in danger. This is not due to wear and tear - it is due to a faulty electrical program.
- Fuel/propulsion system
The fuel pump system needed to be replaced completely, although the mileage is just around 60000 miles.
- Air bags
Airbag light is flashing. Independent shop found code B00C1:93-8B. OCS Sensor B. Shop sent owner to dealer for inspection & repair. Charged $57.24. Dealer found DTC B00C1 passenger seat occupant classification sensor b. Replacement cost for the part $1,110.13, plus shop fess and tax for a total…
Airbag light is flashing. Independent shop found code B00C1:93-8B. OCS Sensor B. Shop sent owner to dealer for inspection & repair. Charged $57.24. Dealer found DTC B00C1 passenger seat occupant classification sensor b. Replacement cost for the part $1,110.13, plus shop fess and tax for a total repair cost of this critical safety item would be $1,197.29. I did not have this service performed due to the high price. This safety item should be covered by the manufacturer. I recently learned that a dealer may not sell a car with this safety issue so I want it fixed and covered by Mazda.
- Electrical system · Seats
I noticed smoke filling the inside of my car. I looked over at the passenger seat, and my coat was on fire. I poured my drink on it, pulled over, and threw the coat out of the car. I saw a large hole in the lumbar area of the passenger seat, and it was glowing red and putting out a lot of heat. The…
I noticed smoke filling the inside of my car. I looked over at the passenger seat, and my coat was on fire. I poured my drink on it, pulled over, and threw the coat out of the car. I saw a large hole in the lumbar area of the passenger seat, and it was glowing red and putting out a lot of heat. The seat heater was on, so I immediately turned it off. It was obvious that the fire has started inside the seat, and there was no other fire source in car--ie. lit cigarette, lighter, etc. If someone had been sitting there, they would have serious burns. The seat will need to be replaced.
- Seats
Leather heated seats .. safety put at risks because I suffered burns on my bottom (butt) from the driver seat getting too hot to the point where it burned the seat itself as well , and made a brown burn mark on the seat … Both of my cheeks got burned .. this can in the long run cause skin damage and worse case scenario cancer. No it hasn’t been inspected No warning lamps
- Suspension
With no prior warning, just after turning into driveway, my car got stuck and would not move. It gave clicking sounds and would not move no matter which gear it was in. The towing service person needed a dolly in order to safely lift the vehicle onto the towing bed because the front, driver’s side…
With no prior warning, just after turning into driveway, my car got stuck and would not move. It gave clicking sounds and would not move no matter which gear it was in. The towing service person needed a dolly in order to safely lift the vehicle onto the towing bed because the front, driver’s side tire would not move and was pushing into the fender. So far, the control arm and axel are completely separated from the car. Further investigation is ongoing to determine the extent of the spontaneous injury. This all happened without warning.
- Electrical system
Passenger side seat heater overheated and burned upholstery.
- Electrical system · Seats
I was driving down the road and started smelling smoke then looked over and my passenger seat was in flames.
- Electrical system · Seats
The front passenger seat heating system caught fire and burned through the fabric and my dog's seat. The fumes made me and my dog nauseous.i had to swerve across the highway and stop on the shoulder to extinguish the seat fire/burn. The fuse was pulled for safety. The seat IS in storage for inspection. Mazda will be contacted.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011141Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: seats, steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions.
- 11009654The SKYACTIV-DRIVE FW6A-EL AT uses Automatic Transmission Fluid (ATF) Type: FZ. Only use ATF-FZ to fill or top off the fluid level. ATF-FZ is specially designed for use in the SKYACTIV-DRIVE series AT. It is a low viscosity formula with less friction for better fuel economy. NOTE: ATF-FZ is colored blue for easy identification.
- 11009644Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 11008577Some customers may complain about scratches on the instrument cluster lens.
- 11007029For improvement of electrical diagnosis, the SKYACTIV Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV vehicles and compare suspect terminal drag with a known good terminal. To measure the voltage/resistance avoiding any terminal damage.
- 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 11007018Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way.
- 11007013Auxiliary key blank cutting procedure. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
- 11007010Some customer's might state that they notice fluid or oil leaking/dripping on the ground when the vehicle is parked. For this concern, inspect the vehicle for any trace of a fluid or oil leak and use the following examples as a guide to determine if it is severe enough to require a repair, or just to clean the area and monitor it at the next service.
- 11007009Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 11006998Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
- 11006987In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealers responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the Speedometer Replacement Label. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazdas vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 11006917Some customers may complain that their liftgate does not open. This can mean a range of things, from the liftgate not unlatching to the power liftgate (PLG) not opening automatically. If you confirm that the customer's concern is that the liftgate does not unlatch correctly, follow the repair information below.
- 11005671Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11005528Front Brake Noise Symptom 1: Some vehicles may exhibit a click noise when first moving forward or reverse from a stop OR when first applying the brakes while moving forward at slow speeds. This is caused by deteriorated grease between the brake pads and the shim, the front brake pads move upward/downward along with the brake rotors during brake application. When the vehicle moves or the brakes are applied the next time, the front brake pads move to the other side, which causes a click noise. Front Brake Noise Symptom 2: Some vehicles may exhibit the brakes having an unusual noise or vibration when applying the brake. This is caused by rust on the brake disk plates surface. Rear Brake Noise Symptom 1: Some vehicles may exhibit a squeak noise from the rear brakes while braking lightly and occurs more frequently when driving at slow speeds. The noise is caused by poor contact between the guide plate and the mounting support. To eliminate this concern, the material of the pads has been changed to copper-free and the specification of the shims has been changed to a coated spring with tape. Rear Brake Noise Symptom 2: Some vehicles equipped with an electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise.
- 11003398Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11003397Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
- 11003396Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 10254191Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
- 10252508Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 10252507Due to limitations, certain vehicles from 2016 to current models might display an inaccurate transmission part number in the Global Electronic Parts Catalog (GEPC). To provide support in such cases, a temporary lookup guide has been developed for assistance.
- 10251387Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10251368Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
- 10244679If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10244671Some customers may complain of signs of oil on the struts or shock absorbers. In most cases the oil that is present is normal, and a result of the oil that remains on the shaft during the normal sweeping process of the shaft seal. Follow the inspection guidelines below to determine if the condition is a result of the normal sweeping process or a failure of the shaft seal.
- 10243569Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10243568Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 10243545Front Brake Noise Symptom 1: Some vehicles may exhibit a click noise when first moving forward or reverse from a stop OR when first applying the brakes while moving forward at slow speeds. This is caused by deteriorated grease between the brake pads and the shim, the front brake pads move upward/downward along with the brake rotors during brake application. When the vehicle moves or the brakes are applied the next time, the front brake pads move to the other side, which causes a click noise. Front Brake Noise Symptom 2: Some vehicles may exhibit the brakes having an unusual noise or vibration when applying the brake. This is caused by rust on the brake disk plates surface. Rear Brake Noise Symptom 1: Some vehicles may exhibit a squeak noise from the rear brakes while braking lightly and occurs more frequently when driving at slow speeds. The noise is caused by poor contact between the guide plate and the mounting support. To eliminate this concern, the material of the pads has been changed to copper-free and the specification of the shims has been changed to a coated spring with tape. Rear Brake Noise Symptom 2: Some vehicles equipped with an electric parking brake (EPB) may exhibit a grinding noise from the rear brakes when braking. This may be caused by the rear brake pads not having the capability to remove the rust from the rear brake discs. The red rust accumulated on the discs is exposed to high temperatures during braking, and consequently the rust turns black. As the black rust is too hard to be removed by the brake pads, the rust progress is accelerated, resulting in the grinding noise.
- 10241637Some customers may complain about scratches on the instrument cluster lens.
- 10240496Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10238697Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way. NOTE: The antistatic effect does not deteriorate with this procedure.
- 10238695Some customers may complain of a lack of power under heavy load without any warning lights or DTCs. This concern may be due to a loose or detached hood weatherstrip, which can cause a blockage or restriction in the air intake system.
- 10238663Some vehicles may exhibit oil leakage from the drive belt auto tensioner and rattling noises from the engine compartment. This may be caused by insufficient sealing at the drive belt auto tensioner damper when the auto tensioner fully operates under both high ambient temperature and high load conditions. To eliminate this concern, the shape of the drive belt auto tensioner damper has been changed.
- 10237217Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
- 10237216If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10237215Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
- 10237199Some vehicles may experience the check engine light and automatic transaxle warning light ON with one or more of these DTCs stored in the TCM memory (P0842, P0847, P0872, P0877, P0780, P1738).
- 10235414Some vehicles may exhibit wear/peel-off of the leather steering wheel surface causing a poor appearance. This concern may be caused by an insufficient wear resistance of the steering wheel surface.
- 10233704Some customers may report an odor or water in the HVAC system and upon inspection, the cabin air filter may be found to be wet.
Every Mazda CX-5 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.