2011 Mercedes-Benz E550

Recalls

3 recalls name the 2011 Mercedes-Benz E550. Newest first.

• Air bags › Frontal › Passenger side › Inflator module

  Jan 9, 2019NHTSA 19V010000288,779 vehicles

  Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2014 C250, C300 4Matic, C350, C63 AMG, E350 4Matic Coupe, E350 Cabrio, E350 Coupe, SLS AMG Cabrio, SLS AMG Coupe, 2014-2015 C250 Coupe, C350 4Matic Coupe, C350 Coupe, C63 AMG Coupe, GLK 350, GLK250 BlueTec 4Matic, GLK350 RWD, 2015-2017 E400 4Matic Coupe, E400 Cabrio, E400 Coupe, 2014-2017 E550 Cabrio, and…

  Risk and remedy

  Risk

  An inflator explosion may result in sharp metal fragments striking the passenger or other occupants resulting in serious injury or death.

  Remedy

  MBUSA will notify owners, and dealers will replace the passenger frontal air bag module, free of charge. The recall began March 29, 2019. Owners may contact MBUSA customer service at 1-800-367-6372.

  Full recall details →

• Air bags › Frontal › Passenger side › Inflator module

  May 26, 2016NHTSA 16V363000258,163 vehicles

  Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2008-2011 C300 Sedan, C300 4matic Sedan, C350 Sedan, C63 AMG Sedan vehicles, 2010-2011 GLK350, GLK350 4-Matic and E350 Coupe vehicles, 2011 SLS AMG, E350 Convertible, E550 Coupe and E550 Convertible vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii…

  Risk and remedy

  Risk

  An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.

  Remedy

  MBUSA will notify owners, and dealers will replace the passenger frontal air bag modules, free of charge. Owners were sent an interim notification October 2016. A second notice will be mailed when remedy parts are available. Owners may contact MBUSA customer service at 1-877-496-3691.

  Full recall details →

• Air bags › Frontal › Driver side › Inflator module

  Feb 11, 2016NHTSA 16V081000711,159 vehicles

  Mercedes-Benz USA, LLC. (MBUSA) is recalling certain model year 2009-2010 ML320 BlueTec 4Matic, GL320 BlueTec 4Matic and R320 CDI 4Matic, 2011 E350 Cabriolet and E550 Cabriolet, 2009-2011 ML350, ML350 4Matic, ML550 4Matic, ML63 AMG, and C63 AMG, 2010-2011 ML450 4Matic Hybrid, E350 Coupe, E350 4Matic, E550 Coupe, E550 4Matic, and E63 AMG, 2011-2012 GL350…

  Risk and remedy

  Risk

  In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.

  Remedy

  MBUSA will their notify owners, and Fiat Chrysler will notify the affected Chrysler owners. Dealers for the respective brands will replace the driver's frontal air bag module, free of charge. This recall began November 2016. Mercedes-Benz owners may contact MBUSA customer service at 1-800-367-6372 and Chrysler owners may contact Fiat Chrysler customer service at 1-800-853-1403.

  Full recall details →

Owner complaints

What owners report most

1. Air bags32
2. Suspension20
3. Unknown or other3
4. Service brakes2
5. Engine2
6. Fuel/propulsion system2
7. Visibility/wiper1
8. Electrical system1
9. Lane departure1
10. Power train1

Latest complaints

• Apr 30, 2024MA
  Unknown or other
  Wood trim throughout the car is cracking and falling off the car on the dash board as well as the doors and the rear side panels. The trim pieces that remain on the car are very sharp and jagged and are a significant risk for cuts in day to day use. In the event of an accident a passenger could be…

  Wood trim throughout the car is cracking and falling off the car on the dash board as well as the doors and the rear side panels. The trim pieces that remain on the car are very sharp and jagged and are a significant risk for cuts in day to day use. In the event of an accident a passenger could be seriously injured from this jagged wood . My car is a 2011 E550 convertible, the W207 platform, the very same car in 4 door form the W212 platform, from model year 2010-2016 is fully covered for wood replacement as NHTSA has deemed it a safety issue. I have been told by Mercedes Benz corporate there is no coverage for my car, they suggested I report this safety issue to NHTSA in the hopes of having this safety issue addressed as quickly as possible. I respectfully request help in getting the issue with the wood in my car covered under the same safety consideration. Thank you.

• Jan 4, 2023NY
  Suspension
  The vehicle felt like it was all over the road at highway speeds. Took it to a mechanic and the rear subframe had become weakened with premature rust. The mounting point for one of the rear suspension arms had broken off of the subframe and was making contact with my gas tank. I called the…

  The vehicle felt like it was all over the road at highway speeds. Took it to a mechanic and the rear subframe had become weakened with premature rust. The mounting point for one of the rear suspension arms had broken off of the subframe and was making contact with my gas tank. I called the dealer to see if there were any recalls. No recalls for this issue however there are a few reports on this website. I have also been on forums for my vehicle and it is a VERY common problem on these vehicles. From what i gather this is a widespread issue, and the fact that it could possibly puncture a gas tank and cause serious injury that something should be done to correct the concern.

• Nov 15, 2022TXFire
  Electrical system · Engine · Unknown or other

  The issue with the vehicle's electrical causing power to the starter to stay on even after the vehicle is in the park and turned off, the starter's Solenoid and other electrical parts burn, its a serious fire hazard and needs to be addressed immediately.

• Nov 15, 2022TX
  Suspension › Front › Springs › Air suspension system
  When I parked my car there was a loud hissing sound near left front end but no smoke or anything from under the hood. When I drove it again I received a warning of (MALFUNCTION) when I was turning left the front left tire was grinding on the actual car and barely made it home. The car warning…

  When I parked my car there was a loud hissing sound near left front end but no smoke or anything from under the hood. When I drove it again I received a warning of (MALFUNCTION) when I was turning left the front left tire was grinding on the actual car and barely made it home. The car warning turned red and said pull over car too low. When I parked the car the front left side is now sitting on tire and touching the ground. Unable to drive. Not been investigated by a mechanic, insurance, etc. There was also an airbag warning before this issue. The contact has stated that she is disabled, and the vehicle is not currently drivable.

• Sep 6, 2022AZ
  Lane departure › Blind spot detection · Unknown or other

  The passenger door will not open from the inside. The vehicle has not been inspected by any parties yet. No warning messages are currently displayed.

• Jun 14, 2022MA
  Suspension
  The air suspension started leaning heavily on one side after being parked for 12+ hours. And 2 days ago, while warming up the car, air suspension did not stop pumping air until front right air strut blew up. It was really loud and unexpected, I was lucky the car was not driven when the explosion…

  The air suspension started leaning heavily on one side after being parked for 12+ hours. And 2 days ago, while warming up the car, air suspension did not stop pumping air until front right air strut blew up. It was really loud and unexpected, I was lucky the car was not driven when the explosion happened. Checking through forums, most people who own W212 E-Class with airmatic suspension have issues with car lowering over night. This is a big Safety concern that might lead to blow out of the strut(or multiple)

• Dec 9, 2021CA
  Power train
  Transmission cooler which i manufactured inside the radiator failed causing transmission fluid to mix with anti-freeze/coolant, now the transmission slips and per recommendation from a mercedes dealership the vehicle needs a new transmission, torque converter, radiator, radiator cap, new upper and…

  Transmission cooler which i manufactured inside the radiator failed causing transmission fluid to mix with anti-freeze/coolant, now the transmission slips and per recommendation from a mercedes dealership the vehicle needs a new transmission, torque converter, radiator, radiator cap, new upper and lower radiator hoses, new upper and lower radiator overflow hoses, new thermostat and the entire cooling system to be flushed and the transmission lines to be flushed, estimated at $11,200 for the repair

• Sep 1, 2020TN132,000 mi
  Structure › Body

  The sun roof makes a loud cracking noise when you hit certain bumps or dips in the road. It does it more when the weather IS hot. I have noticed that certain models years have been recalled. This car definitely has a sunroof issue and its had this problem since I purchased it about a year ago

• Aug 28, 2020IL68,972 miCrash1 injury
  Air bags
  TL* takata recall. The contact owns 2011 mercedes benz E550. The contact stated that while her son was driving 5 mph, another vehicle crashed into the front driver side of the vehicle and the air bag failed to deploy. the driver sustained injuries to the head but did not seek medical attention. A…

  TL* takata recall. The contact owns 2011 mercedes benz E550. The contact stated that while her son was driving 5 mph, another vehicle crashed into the front driver side of the vehicle and the air bag failed to deploy. the driver sustained injuries to the head but did not seek medical attention. A police report was filed. The vehicle was towed to a body shop. For the body work of the accident. The contact received nhtsa recall campaign number: 16v081000 (air bags) the vehicle was not taken to a dealer but the contact called mercedes-benz of westmont (200 e ogden ave, westmont, il 605590 and was informed them of the failure. The dealer informed the contact that part was not available for the repair. The vehicle was not taken to a dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 68,972. Part distribution disconnect. ## vin passed ## mercedes-benz e550w4 2011 ##

• Jul 7, 2020AZ40,000 mi
  Suspension

  The air suspension leaks

• Oct 16, 2019CA
  Air bags

  I have been receiving recall notices for over a year and the dealer makes an appointment and then cancels the appointment. they have never returned my calls regarding this recall except to cancel the appointments I have had my other recalled vehicle repaired almost a year ago. When can I get my vehicle repaired? the dealer IS mercedes-benz of stevens creek.

• Oct 15, 2019WV
  Air bags
  TL* takata recall. The consumer owns a 2011 mercedes-benz E550. The consumer stated that the recall notice for nhtsa campaign number: 16v081000 (air bags) was received. After contacting astorg auto of charleston (5 dudley farms ln, charleston, west va), the consumer was informed that the parts…

  TL* takata recall. The consumer owns a 2011 mercedes-benz E550. The consumer stated that the recall notice for nhtsa campaign number: 16v081000 (air bags) was received. After contacting astorg auto of charleston (5 dudley farms ln, charleston, west va), the consumer was informed that the parts needed for the recall remedy were still not available. The manufacturer was not notified. The consumer had not experienced a failure. Vin tool confirms parts not available. *Bf consumer has stated that vehicle was repaired.*as

• Oct 4, 2019IL
  Air bags
  TL* the contact owns a 2011 mercedes-benz E550. The contact received notification of nhtsa campaign numbers: 16v081000 and 19v010000 (air bags). The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The contact called mercedes-benz of nashville (630…

  TL* the contact owns a 2011 mercedes-benz E550. The contact received notification of nhtsa campaign numbers: 16v081000 and 19v010000 (air bags). The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The contact called mercedes-benz of nashville (630 bakers bridge ave, franklin, tn 37067, (800) 770-5582) and scheduled an appointment. The manufacturer from atlanta called the contact and informed him that he was not supposed to receive the recall notification because it was a mistake. The contact had not experienced a failure. Vin tool confirms parts not available. *Tr consumer stated the matter has been successfully resolved. No further action IS required.*jb

• Sep 10, 2019KS
  Air bags
  TL* the contact owns a 2011 mercedes-benz E550. The contact stated that nhtsa campaign number: 19v010000 (air bags) exceeded a reasonable amount of time for repair. The contact received the recall notification in 2015. The contact spoke with an unknown dealer and was informed that the part was not…

  TL* the contact owns a 2011 mercedes-benz E550. The contact stated that nhtsa campaign number: 19v010000 (air bags) exceeded a reasonable amount of time for repair. The contact received the recall notification in 2015. The contact spoke with an unknown dealer and was informed that the part was not available. The manufacturer was not contacted. The contact had not experienced a failure. Vin tool confirms parts not available.

• Aug 19, 2019CA
  Air bags
  TL* takata recall. The contact owns a 2011 mercedes-benz E550. The contact received notification of nhtsa campaign numbers: 16v081000 (air bags) and 16v363000 (air bags). The contact stated that the manufacturer exceeded a reasonable amount of time to repair the vehicle. Mercedes-benz of beverly…

  TL* takata recall. The contact owns a 2011 mercedes-benz E550. The contact received notification of nhtsa campaign numbers: 16v081000 (air bags) and 16v363000 (air bags). The contact stated that the manufacturer exceeded a reasonable amount of time to repair the vehicle. Mercedes-benz of beverly hills (9250 beverly blvd, beverly hills, ca 90210, (310) 659-2980) was contacted and confirmed that parts were not available for the recall remedy. The manufacturer was made aware of the issue and was not able to confirm when the parts were to become available. The contact had not experienced a failure. Vin tool confirms parts not available. *bf consumer stated the car IS now fixed.*jb

• Aug 6, 2019PA
  Air bags
  TL* the contact owns a 2011 mercedes-benz E550. The contact received notification of nhtsa campaign numbers: 16v081000 and 19v010000 (air bags). The contact stated that euro motorcars devon mercedes-benz (located at 214 lancaster ave, devon, pa 19333, (610) 687-1500) exceeded a reasonable amount of…

  TL* the contact owns a 2011 mercedes-benz E550. The contact received notification of nhtsa campaign numbers: 16v081000 and 19v010000 (air bags). The contact stated that euro motorcars devon mercedes-benz (located at 214 lancaster ave, devon, pa 19333, (610) 687-1500) exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and stated that the part was not available for the repair. The contact had not experienced a failure. Parts distribution disconnect.

• Jul 10, 2019CA
  Air bags
  TL* takata recall. The contact owns a 2011 mercedes-benz E550. The contact received a recall notification for nhtsa campaign numbers: 16v081000 (air bags) and 16v363000 (air bags). The contact stated that the manufacturer exceeded a reasonable amount of time to repair the vehicle. Walter…

  TL* takata recall. The contact owns a 2011 mercedes-benz E550. The contact received a recall notification for nhtsa campaign numbers: 16v081000 (air bags) and 16v363000 (air bags). The contact stated that the manufacturer exceeded a reasonable amount of time to repair the vehicle. Walter mercedes-benz of riverside (3213 adams st, riverside, ca 92504) confirmed that parts were not available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

• Jul 1, 2019AZ64,000 mi
  Suspension
  Air suspension appears to be leaking. After sitting in my garage overnight the body of the 2011 mercedes E550 IS lowered by almost 2 inches. When I start the car after sitting less than 24 hours, a prompt on the dash information screen indicates "vehicle rising, please wait". The mercedes has just…

  Air suspension appears to be leaking. After sitting in my garage overnight the body of the 2011 mercedes E550 IS lowered by almost 2 inches. When I start the car after sitting less than 24 hours, a prompt on the dash information screen indicates "vehicle rising, please wait". The mercedes has just over 64,000 miles. In research of the issue, it appears to be a chronic malfunction with the W212 mercedes air suspension system, as well as several hundred to 1-2 thousand dollar repair.

• Jun 26, 2019MD
  Air bags
  TL* takata recall. The contact owns a 2011 mercedes-benz E550. The contact received a recall notification for nhtsa campaign numbers: 16v081000 (air bags) and 19v010000 (air bags). The contact stated that the manufacturer exceeded a reasonable amount of time to repair the vehicle. Euro motorcars…

  TL* takata recall. The contact owns a 2011 mercedes-benz E550. The contact received a recall notification for nhtsa campaign numbers: 16v081000 (air bags) and 19v010000 (air bags). The contact stated that the manufacturer exceeded a reasonable amount of time to repair the vehicle. Euro motorcars (7020 arlington rd, bethesda, md 20814) confirmed that parts were not available to perform the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. Vin tool confirms parts not available.

• Jun 17, 2019HI70,000 mi
  Suspension

  Slow leak of air shocks until the vehicle IS now completely down and unable to rise.

• May 7, 2019TX95,000 mi
  Suspension

  The airmatic suspension on this vehicle has premature wear as do many others. The air shock components leak air causing the car to lower dangerously to the ground. It occurs stationary, while in motion, at various driving situations.

• Apr 11, 2019MS92,000 mi
  Suspension
  "Car too low" warning came on when I got in my car and drove about a block; I pulled over, looked around the entire car and then got back into my car; the 'car too low' warning had disappeared; the next morning I noticed that the right front tire was almost touching the fender; I contacted a local…

  "Car too low" warning came on when I got in my car and drove about a block; I pulled over, looked around the entire car and then got back into my car; the 'car too low' warning had disappeared; the next morning I noticed that the right front tire was almost touching the fender; I contacted a local foreign car repair shop and was informed that the suspension had failed and that both shocks (which I was told had air bags) needed to be replaced; I have not driven this car 500 miles since I purchased it the 1ST of february of this year (2019) but now since this has happened and with research this seems to be a problem with the mercedes car; if I had known I would not have purchased it.

• Apr 8, 2019CA
  Air bags
  TL* takata recall. The contact owns a 2011 mercedes-benz E550. The contact received notification of nhtsa campaign numbers: 16v081000 (air bags) and 16v363000 (air bags). The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Mercedes-benz of san…

  TL* takata recall. The contact owns a 2011 mercedes-benz E550. The contact received notification of nhtsa campaign numbers: 16v081000 (air bags) and 16v363000 (air bags). The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Mercedes-benz of san francisco (500 8TH st, san francisco, ca 94103, (415) 673-2000) was contacted and confirmed that the parts were available for the recall remedy. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect. air bag replaced.*jb

• Mar 9, 2019CA84,511 mi
  Suspension

  Leak in air suspension. Front of car drops down when stationary for a few hours.

• Nov 17, 2018CA
  Suspension
  I've had problems with these air suspensions, it appears they are made to fail to make the owner spend money every year, I've had all types of malfunctioning without anything major happening to the car. I spent over 2500$ replacing the rear suspension after it spontaneously started malfunctioning…

  I've had problems with these air suspensions, it appears they are made to fail to make the owner spend money every year, I've had all types of malfunctioning without anything major happening to the car. I spent over 2500$ replacing the rear suspension after it spontaneously started malfunctioning being uneven etc.. And now not long after the rear ones messed up I'm having problems with the front ones. It IS totally unacceptable these products function with fragility and leave the owner in a precarious position because the car will lower itself to a height where the car IS unable to drive leaving the driver to pay potential thousands of dollars... and if the actual pump malfunctions you are looking at at least 6!grand for one part. I've already been taken for about 10000 from mercedes last year alone.. Please hold mercedes liable for future repairs to these air suspensions. Although nothing has happened the front IS malfunctioning now and I don't have thousand to shell out again to mercedes

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Desiccated Air Bag Inflator Rupture

  EA21002Opened Sep 17, 2021Open
  From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…

  From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

• Rear brake line failure

  DP20004Opened Apr 24, 2020Closed Oct 9, 2020
  On April 10, 2020, NHTSA's Office of Defects Investigation (ODI) received a defect petition from Mr. Surjit Singh alleging premature corrosion of the rear brake lines in his 2013 Mercedes-Benz E350 sedan. The petitioner states that he was recently informed by a Mercedes dealer service department that his car had…

  On April 10, 2020, NHTSA's Office of Defects Investigation (ODI) received a defect petition from Mr. Surjit Singh alleging premature corrosion of the rear brake lines in his 2013 Mercedes-Benz E350 sedan. The petitioner states that he was recently informed by a Mercedes dealer service department that his car had severely rusted brake lines that need[ed] to be replaced immediately at a cost of about $3300. He further stated that the dealer service advisor informed him that he had seen the issue on many cars like his. The petitioner requested ?that NHTSA launch an investigation into this serious issue of rusting brake lines on [his] 2013 Mercedes E350.? The brake line corrosion reported by the petitioner did not result in brake line leakage or any compromise in brake system performance before it was detected in a dealer vehicle inspection. The petitioner submitted a complaint to NHTSA documenting his experience (NHTSA ID 11319024).On April 24, 2020, ODI opened Defect Petition DP20-004 to evaluate the petitioner?s request. ODI conducted a search for all consumer complaints and Early Warning Reporting (EWR) data related to allegations of brake line corrosion or leakage in 2013 Mercedes-Benz E350 sedans and similarly equipped vehicles. The 2013 E350 is a fourth-generation Mercedes-Benz E-Class vehicle (W212 platform), which was first sold in the United States in 2009 as a 2010 model. Mercedes-Benz sold approximately 245 thousand model year 2010 through 2015 E-Class sedan and wagon vehicles in the United States with the same brake line design as the petitioner?s vehicle.ODI?s search for complaints and EWR data in 2013 Mercedes E350 vehicles found no additional records related to the alleged defect. Expanding the search to all W212 platform vehicles identified just one incident, a complaint alleging unspecified brake line corrosion and leakage in a 2011 Mercedes-Benz E550 (NHTSA ID 10902081). The complaint did not allege that the brake line leakage resulted in reduced brake performance, crash, or injury. The resulting failure rate of 0.4 failures per hundred thousand vehicles is extremely low for a population that includes vehicles that have been in service for over ten years. After reviewing the available data, ODI has not identified evidence of a defect trend in the subject E-Class vehicles that would support opening a defect investigation into premature brake line corrosion failure. NHTSA is authorized to issue an order requiring notification and remedy of a defect if the Agency?s investigation shows a defect in design, construction, or performance of a motor vehicle that presents an unreasonable risk to safety. 49 U.S.C. ?? 30102(a)(9), 30118. Since the information before the Agency is not indicative of a vehicle-based defect, it is unlikely that any investigation opened because of granting this petition would result in an order concerning the notification and remedy of a safety-related defect. Therefore, upon full consideration of the information presented in the petition and the potential risks to safety, the petition is denied. The denial of this petition does not foreclose the Agency from taking further action if warranted or the potential for a future finding that a safety-related defect exists based upon additional information the agency may receive.A Federal Register notice further detailing NHTSA?s reasons for denial of the petition will be forthcoming.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11010907Complaint The flap of the reversing camera opens and closes by itself during forward travel. This happens several times during the trip. The customer notices the sound of opening and closing. No camera image is displayed in the head unit. The reversing camera or the 360 system functions normally when activated manually or by engaging drive range "R". This behavior occurs again during each driving cycle. Cause This is not a malfunction, but an intended system behavior: Calibration of the reversing camera is in progress. For this, the cover on the camera is opened for max. 5 cumulative minutes in forward travel. The calibration can be performed if the vehicle speed is < 35 km/h and the steering wheel angle is < 10 (for early vehicles from MFA2 facelift model series such as A-Class, CLA, etc., the 35 km/h (~22 MPH) opening limit may only be reached after the SCN coding is replaced). If the speed of 35 km/h (~22 MPH) is exceeded, the camera retracts and the calibration is therefore aborted. The sequence is started again once the speed returns to the range of 18 km/h (~11 MPH). Remedy Complete the calibration successfully. For this, the vehicle must be driven forwards for a certain time (usually significantly less than one minute) at a speed < 35 km/h (~22 MPH) and a steering wheel angle < 10. This should occur during daylight and without a vehicle following too closely (the camera must be able to see the asphalt). When calibration is successful, the camera flap closes automatically at an unchanged speed. For the rest of the driving cycle, the camera now only opens if the customer requests this, for example by applying the reverse gear. When starting a new driving cycle (ignition change), another calibration is required. The customer can generally perform calibration at the first attempt when a speed in the range between 15 km/h (~9 MPH) and 35 km/h (~22 MPH) is briefly maintained and can therefore play a significant role in reducing the actuation frequency and therefore also the noticeability of the noise to a minimum. In the case of early MFA2 facelift vehicles (A-Class, CLA, etc.), the parking control unit may have to be SCN-coded again to have the complete speed window available for the calibration.
• 11010818Complaint Transmission control unit Y3/8n4 (fully integrated transmission control unit (VGS)) not listed in quick test and/or no communication possible with VGS. Cause Transmission control unit Y3/8n4 Remedy It is important that LI54.15-P-057373 is processed before replacing any component parts (transmission 722.9). After processing and complying with the above documents, perform a reset on the transmission control unit Y3/8n4 (VGS) (ignition reset), check that the transmission connector is seated correctly and inspect the PINs for concerns. If communication with the VGS cannot be established afterwards, the component part 'electrohydraulic controller unit (EHS)' must be replaced, as it is not possible to transfer the valve characteristics under the above-mentioned conditions. Installation of a VGS repair kit is not permitted in this case.
• 11009122Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer line by animal. 5. Seal on heating washer fluid reservoir/washer fluid reservoir. Remedy Replace defective component parts only. Do not replace any adjacent component parts that are intact. Note: Repair kits for washer line hoses do exist to allow patches for line damage.
• 11008873Complaint Tension-releasing impact of the propeller shaft with the force-free in D "KID" function, after vehicle has stopped. Cause The tension-releasing jolt in the drivetrain originates as a result of the "release" of energy stored when braking through the force-free switch after stopping. It is suspected that the longitudinal bearing is being placed under tension here as a result of the vehicle "dropping off". Remedy 1. Mark the installation position of the joint prior to the removal (picture a+b). This is important for vehicles with a weighted drivetrain ex factory to ensure correct installation after operations have been completed. 2. Clean and degrease propeller shaft toothing. The toothing must be free of grease, e.g. through the use of a brake cleaner. Do not use wire brushes, else the surface could be damaged (picture c). 3. Coat propeller shaft toothing with A 000 989 16 08 Antifriction coating. Coat the entirety, ensuring that the subsurface is no longer visible. When doing so, only coat the outer toothing. Ensure that the coat is not too thick, otherwise the coating could chip (picture d). 4. Observe the drying time of at least 1 hour. 5. Lightly grease the propeller shaft toothing at the outer and inner toothing with A 001 989 44 51 12 Grease (picture e).
• 11008323Complaint Headlamps fogged or droplets forming. Cause Due to its outlet openings, the headlamp is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate into the headlamp. This can lead to the formation of condensation on the lens of the headlamp. The headlamps comply with all applicable US standards and regulations. Remedy Check housing cover of lamp unit for natural fogging or condensation as per LI82.10-P-078301. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. Note: Order service covers and desiccant packs based on the validity description. 1. Remove headlamps. 2. Remove all grommets from outlet openings. 3. Seal vent openings with sealing profile. Important: All openings must be sealed carefully for the pressure compensation diaphragm to work properly! 4. Remove existing service cover. 5. Place desiccant packs into the new service covers and bolt down (Picture_01). 6. Glue the new diaphragm onto the intended surface at the service cover (Picture_02). Note: The bonding surface must be clean and dry. 7. Attach service cover with desiccant pack at headlamp. 8. Install headlamp. To ensure that the desiccant pack (absorption) acts effectively, the headlamp has to be air-sealed. Observe or check the following points for this: 1. Seals at the central connector must all be present and correctly fitted (Picture_03). 2. The new transparent diaphragm must be correctly bonded (Picture_04). 3. Check headlamp housing for any external damage.
• 11008091Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protruding material residues of the microphone cutout at the headliner, e.g. with a soldering iron. The microphone must be seated in the headliner as shown in picture "2". 4. Push microphone from behind until it is firmly pressed into the headliner 5. Maintain pressure and press/clip cap into microphone from the front. Note: The cover cap must be clearly heard and felt to engage. 6. This procedure must be carried out on both microphones (B25/20 and B25/21) Note: It is recommended to replace the cover caps. The non-woven cloth in the cover cap protects the microphone from soiling and must not be removed. NOTE: The information contained in this document is intended for use by trained, professional technicians with the knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz vehicles, using Mercedes-Benz approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes resulting in the same or similar symptoms or conditions described in this document, and trained professional service technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained in this document does not guarantee warranty coverage nor does it extend the vehicles warranty in any way.
• 11008064In our continuing efforts to ensure the proper performance and quality of your vehicle, we are writing to inform you that on certain Model Year 2011-2018 C-Class, E-Class, S-Class, G-Class, CL, CLS, ML, GL, GLE, GLS, GLC, SL, and AMG GT vehicles with 6 and 8 cylinder gasoline engines, the software of the engine control unit may not meet current specifications. Under certain conditions, the catalyst heating might not work. Therefore, an Emission Service Campaign is being conducted to remedy the situation. Our records indicate that your vehicle is included in the affected population of vehicles.
• 11007974Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front Fog Lamps Leaking or Fogged". 1. Prepare headlamp/check for external damage: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for correct seating of the Gore-diaphragm/correct latching of the cover caps. 2. If the headlamp exhibits any external damage, replace the headlamp. For headlamps with an open system 1. Check the headlamps for any external damage and seal off the vent then make sure the cover caps are latched correctly into place. 2. If the headlamp exhibits any external damage, replace the headlamp. Note: A headlamp with external damage is not a warranty or goodwill case. 2. Leak test of headlamp with overpressure: Connect test adapter to pressure tester. (Figure 1) Check test adapter for leak tightness. To do so, connect plug and coupling (picture 2) and apply a maximum overpressure of 30 mbar. The pressure must remain constant. If the pressure does not remain constant, use a new adapter. Seal all the outlet openings using sealing compound and the given diaphragm with the plunger (picture 3). (Picture 4) Make allowance for the different headlamp variants here (there are different outlet openings). Check if the headlamp needs to be removed to gain access to the diagnostic socket on the headlamp housing. Plug the adapter onto the diagnostic socket on the headlamp housing. (Picture 5). Apply a maximum of 30 mbar overpressure to the headlamp housing. Note: If the maximum overpressure of 50 mbar is exceeded the headlamp seal will be damaged. If a pressure drop of less than 10 mbar is measured within 30 seconds, the headlamp is not leaky and the problem is down to natural physical fogging. If a pressure drop of more than 10 mbar is measured within 30 seconds, the headlamp is leaky. Note: The leaky position can be localized with the aid of soap suds. Replace any leaky headlamps. Note: Desiccant packs can be installed for headlamps that are not leaky. See: LI82.10-P-064766 Fogged headlamp, desiccant pack installed - open ventilation system LI82.10-P-078304 Fogged headlamp, desiccant pack installed - closed ventilation system
• 11007790Complaint Headlamps fogged or droplets forming. Cause Due to the housing cover with pressure compensation diaphragm, the headlamps are a "closed system". This means that the headlamps are protected against acid gases, dirt and exhaust gas. However, moisture can still enter from two sources. Through absorption and desorption (the commonest cause) or through permeation. Moisture is either absorbed by the plastic material and, when the light source is switched on, it is released from the plastic by desorption, or the moisture penetrates through the plastic materials of the headlamp from outside (permeation). This can lead to the formation of condensation on the lens of the headlamp. The headlamps comply with all applicable US standards and regulations. Remedy Check headlamps for natural fogging or condensation as per LI82.10-P-078301. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. Note: Order service covers and desiccant packs based on the validity description. 1. Remove existing service cover with diaphragm (Picture_01 (1)). 2. Insert desiccant packs (Picture_01 (2)) into new service covers with diaphragm and seal with protective grille and bolt down (Picture_01 (3)). Note: One desiccant pack is required for each small service cover, and two desiccant packs are required for each large service cover. 3. Stick the supplied diaphragm onto the new service cover and attach at the headlamp. Note: The bonding surface must be clean and dry. 4. If the headlamp housing has an additional 2nd diaphragm, this must be covered over with masking tape. Note: The bonding surface must be clean and dry. To ensure that the desiccant pack (absorption) acts effectively, the headlamp has to be air-sealed. Observe or check the following points for this: 1. Seals at the central connector must all be present and correctly fitted (Picture_02). 2. The new transparent diaphragm must be correctly bonded (Picture_03). 3. Check headlamp housing for any external damage.
• 11007753Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 C/+64.4 F) and connect the exhaust extraction. Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the hood or trunk. 4. Switch on the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Clearing fogged/condensed halogen/xenon headlamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4F). Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine. 3. Open the hood. 4. Switch off the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Note: If there is no visible reduction in the formation of condensation, check the headlamp for a defect. (See Remedy 2) It is not physically possible to defog the headlamps completely. Fogging does not impair the operation or the service life of the headlamp. Remedy 2 A Damaged headlamp can be identified as follows: 1. Check the headlamp for external damage and that the cover caps and the diaphragm are correctly seated. 2. Check the electrical connectors of the plugs and pins. 3. Check for leak tightness in accordance with LI82.10-P-078307. The test can only be conducted on headlamps. 4. If the headlamp or the rear lamp has any external damage, replace the component part in accordance with the WIS instructions. Note: External damage to the headlamp/rear lamp or faulty seating of the cover caps does not present a warranty or goodwill case. With headlamps, it is possible to install desiccant packs if the problem occurs repeatedly. Open ventilation system: LI82.10-P-064766. Closed ventilation system LI82.10-P-078304
• 11007750Complaint Dynamic seat function or multicontour system inoperative Noises from area of lateral support bladder Cause Lateral support bladder leaking Remedy Replacement of complete air cushion insert.
• 11006658Mercedes-Benz AG ("MBAG"), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (MY) C-Class, E-Class, S-Class, G-Class, CL, CLS, ML, GL, GLE, GLS, GLC, SL, and AMG GT (204, 205, 207, 212, 213, 217, 221, 222, 463, 216, 218, 166, 292, 253, 231, and 190 platforms) vehicles with 6 and 8 cylinder gasoline engines, the software of the engine control unit may not meet current specifications. Under certain conditions, the catalyst heating might not work. MBUSA will conduct an Emission Service Campaign. An authorized Mercedes-Benz dealer will update the engine control unit software on the affected vehicles. Affected customers will be notified via First Class letter to have the update performed on their vehicle.
• 11005294Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress).
• 10252770As previously reported, to enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a Settlement regarding claims relating to allegations that the 590 Mars Red paint available as an original, exterior color option for certain models of Mercedes-Benz vehicles may experience peeling, flaking, or bubbling of the exterior paint or clear coat. This Mars Red paint is sometimes referred to as Fire Opal. The purpose of this update is to alert you that: 1. The Settlement has received final approval. The Settlement will go into effect on March 11, 2024. As of that date, customers are eligible to receive extended warranty coverage under the Settlement. 2. Under the Settlement, an eligible customer might receive extended warranty coverage as of the date the vehicle is presented to your dealership OR certain customers might have validated Qualified Future Repair claims, making them eligible for a different level of coverage. To determine if a customer: (a) is eligible for extended warranty coverage; and (b) what level of warranty coverage is available to them, please refer to the Service Packages section in VMI/Netstar. 3. Damage code 21800 (damage type 00) must be used for warranty claims covered pursuant to the Settlement. Please note that you should only claim for the percentage of warranty repair cost reflected in VMI/Netstar (see below, e.g., for Period Two, claim only 50% of warranty repair cost). 4. Before the dealership agrees to perform any work: The customer should be given a Repair Order containing: (1) an estimate for the repair, (2) the portion covered under the extended warranty; and (3) the customers contribution amount for the repair, if applicable. The customer must agree to pay their contribution amount for the repair and sign the Repair Order before the repair is performed.
• 10248162Crease formation on genuine leather seat covers in vehicles with low mileage Objects left on the seats for extended periods of time (pressure marks). Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). Light initial creases due to vehicle handling. Light creases in the outer covers originating from the production process (missing finish). Heat treatment of the seat covers using heat gun and plastic wedge. Be very careful to not overheat the seat material!
• 10246055In our continuing efforts to assure the proper performance of Mercedes-Benz products and to enhance the satisfaction of our customers, Mercedes-Benz USA (MBUSA) is extending the warranty coverage on the fuel filter unit for Partial Zero Emission Vehicles (PZEV) from the original New Vehicle Limited Warranty of 4 years / 50,000 miles to 15 years/150,000 miles (whichever occurs first), and applies to the vehicle regardless of ownership. Why the warranty extension? On certain Model Year 2010 2011 C / E / GLK Class Mercedes-Benz vehicles, a potential fuel seepage from the fuel filter flange could result in the fuel odor and/or an activation of the check engine Malfunction Indicator Lamp (MIL). . Any repairs under this warranty extension must be performed by an authorized Mercedes-Benz dealership. If your preferred authorized Mercedes-Benz dealership performs a diagnosis and confirms that your vehicle has the issue, the repair will be covered under this extended warranty and performed at no cost to you. This extended warranty does not apply to any other components or conditions beyond the ones mentioned above, and standard warranty terms apply, including the exclusions with respect to extra expenses, as identified in the Service and Warranty Information booklet.
• 10241790The Mercedes me connect services cannot be activated. The remote status data does not update. Error in N112/9 - control unit for telematics services (HERMES). In the HERMES control unit log, under the "URL" tab, the value DEFAULT is stored for "atpServerUrl" and/or "rcsServerUrl". Please carry out a re-commissioning of the control unit N112/9 - Control unit for telematics services (HERMES), which includes both a software update as well as coding. The fault will be rectified by the newly included coding. As a result of the software update to the current software of the control unit N112/9 - Control unit for telematics services (HERMES), this fault will no longer occur in future.
• 10235996Additional information around the recent recall announcement affecting approximately 705,983 Mercedes-Benz passenger vehicles involving Takata driver-side airbags containing PSDl-5 type inflators
• 10235978Recall Campaign announcement for Takata driver airbags.
• 10235972Enclosed for your information and pursuant to part 579.5, please find our latest Service and Warranty Bulletins for March, 2016
• 10235673To enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a settlement regarding claims relating to allegations that the Burl Walnut Trim in model year 2010 to 2016 Mercedes-Benz E-Class (212 platform) vehicles is defective. This Burl Walnut Trim is also sometimes referred to as Burred Walnut.
• 10233796Mercedes-Benz USA, LLC (MBUSA) has extended the warranty for the rear subframe on the vehicles listed below, from the original New Vehicle Limited Warranty of 4 years/50,000 miles to 20 years/unlimited miles, and applies to the vehicle regardless of ownership. This warranty extension applies to the replacement of the rear subframe under the standard warranty terms and conditions in the even the subframe experiences corrosion with perforation (holes). The extended warranty is applicable to the following vehicles: Model Year Model (platform) WIS reference 2005 - 2011 SLK-Class (R171) AR35.10-P-0010V 2012 - 2017 SLK-Class (R172) AR35.10-P-0010V 2012 - 2016 CLS-Class (C218) AR35.10-P-0010EW 2013 - 2016 SL-Class (R231) AR35.10-P-0010RK 2008 - 2015 C-Class Sedan/Coupe (W/C204) AR35.10-P-0010CW 2010 - 2015 GLK-Class (X204) AR35.10-P-0010CW 2010 - 2016 E-Class Sedan/Wagon (W/S212) AR35.10-P-0010EW 2010 - 2017 E-Class Coupe/Cabrio (C/A207) AR35.10-P-0010CW All models require cavity preservation on the rear axle carrier after the replacement according to AR35.10-P-0010-03A.
• 10233794Why the warranty extension? On certain Model Year 2011-2016 CL/CLS/S/E/ML/SL/G/GL/GLE-Class vehicles with V8 engines, the exhaust valve assembly might not work properly and result in an engine misfire and potential illumination of the check engine Malfunction Indicator Lamp (MIL).
• 10233780Mercedes-Benz USA, LLC (MBUSA) has extended the warranty for the rear subframe on the vehicles listed below, from the original New Vehicle Limited Warranty of 4 years/50,000 miles to 20 years/unlimited miles, and applies to the vehicle regardless of ownership. This warranty extension applies to the replacement of the rear subframe under the standard warranty terms and conditions in the event the subframe experiences corrosion with perforation (holes). The extended warranty is applicable to the following vehicles: Model Year Model (platform) WIS reference 2005 - 2011 SLK-Class (R171) AR35.10-P-0010V 2012 - 2017 SLK-Class (R172) AR35.10-P-0010V 2012 - 2016 CLS-Class (C218) AR35.10-P-0010EW 2013 - 2016 SL-Class (R231) AR35.10-P-0010RK 2008 - 2015 C-Class Sedan/Coupe (W/C204) AR35.10-P-0010CW 2010 - 2015 GLK-Class (X204) AR35.10-P-0010CW 2010 - 2016 E-Class Sedan/Wagon (W/S212) AR35.10-P-0010EW 2010 - 2017 E-Class Coupe/Cabrio (C/A207) AR35.10-P-0010CW All models require cavity preservation on the rear axle carrier after the replacement according to AR35.10-P-0010-03A.
• 10232321Mercedes-Benz USA, LLC (MBUSA) has extended the warranty for the rear subframe on the vehicles listed below, from the original New Vehicle Limited Warranty of 4 years/50,000 miles to 20 years/unlimited miles, and applies to the vehicle regardless of ownership. This warranty extension applies to the replacement of the rear subframe under the standard warranty terms and conditions in the event the subframe experiences corrosion with perforation (holes). The extended warranty is applicable to the following vehicles: Model Year Model (platform) Model Year Model (platform) 2005 - 2011 SLK-Class (R171) 2008 - 2015 C-Class Sedan/Coupe (W/C204) 2012 - 2017 SLK-Class (R172) 2010 - 2015 GLK-Class (X204) 2012 - 2016 CLS-Class (C218) 2010 - 2016 E-Class Sedan/Wagon (W/S212) 2013 - 2016 SL-Class (R231) 2010 - 2017 E-Class Coupe/Cabrio (C/A207) Only the following damage code can be claimed for the replacement of the rear subframe due to corrosion with perforation: Damage Code: 35441 47 Always check VMI to determine if a vehicle is covered under this 20 years/unlimited miles extended warranty. Please
• 10231042To enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a settlement regarding claims relating to allegations that the Burl Walnut Trim in model year 2010 to 2016 Mercedes-Benz E-Class (212 platform) vehicles is defective. This Burl Walnut Trim is also sometimes referred to as Burred Walnut. The purpose of this NCU update is to alert you that: 1. The settlement went into effect on January 23, 2023. Customers are now eligible to receive extended warranty coverage and may start contacting authorized Mercedes-Benz dealerships to schedule an appointment for the repairs. 2. Before scheduling a repair appointment and ordering replacement parts kits: The customer should be given a repair order containing: (1) an estimate for the repair, (2) the portion covered under the extended warranty; and (3) the customers contribution amount for the repair, if applicable. The customer must agree to pay their contribution amount for the repair and sign the repair order before the parts kit can be ordered.
• 10207199Complaint The range of the integrated garage door opener (GTO) is too short. Cause 1. Vehicles equipped with infrared windows and/or a heated windshield may suffer from complaints involving low transmission power. 2. When comparing the range between the integrated GTO and the garage door hand transmitter, the garage door hand transmitter is tested outside the vehicle. 3. The garage door hand transmitter is being aimed towards the garage door, but the vehicle is in a different position. 4. The garage door drive is old. Remedy 1. The lower level of transmission power is mainly perceived by customers who did not have any infrared windows (code 595) or all-round infrared windows (code 596) or heated windshield (code 597) in their previous model or who have another model without this special equipment in their fleet. The loss in transmission has technical reasons, i.e. a thin metal film is fitted in the windows. Please consider these codes and advise the customer accordingly! Replacing parts does not remedy the problem. 2. Perform the comparison test between the integrated GDO and the garage door hand transmitter under identical conditions. The garage door hand transmitter must be inside the vehicle and must be held at the height of the inside rearview mirror. 3. The customer instinctively aims the garage door hand transmitter towards the door. However, the transmission direction of the integrated GDO depends on the position of the inside rearview mirror, and thus depends directly on the position of the vehicle relative to the receiving antenna of the garage door drive.
• 10207198Complaint The garage door hand transmitter cannot be initialized with the integrated garage door opener in the inside rearview mirror. Cause 1. The integrated garage door opener (GDO) is not compatible with the opening system installed in the garage. 2. The garage door drive uses a rolling code system. In contrast to the fixed code system, the LED in the mirror in this case flashes green after programming. 3. When the handheld remote control is initialized with the integrated GDO, the distance between the handheld remote control and the GDO is too long or too short. 4. The maximum programming time of the hand transmitter was exceeded. The hand transmitter switches itself off after 10s to 20s. However, the garage door opener needs up to 30s to learn the code. 5. The maximum programming time of the integrated GDO was exceeded. The integrated GDO has aborted programming unsuccessfully. 6. The GDO cannot be programmed after replacement (See #9). 7. The batteries of the hand transmitter are too weak. 8. A part of the signal was not registered correctly. 9. The GDO is not programmed to US standards. 10. Errors with Chamberlin MyQ, Liftmaster MyQ, or Craftsman AssureLink systems causing loss of synchronization. Remedy Note: The numbering of the remedies refers to the numbering of the causes. 1. Installation of a universal receiver. Order via the Homelink Hotline. 2. In the case of garage door drives with rolling code system, synchronization of the garage door drive must also be performed. 3. Keep the correct distance when initializing! This can vary between 5 and 20 cm depending on the system. If the initialization attempt is unsuccessful, repeat the initialization process, changing the distance between the hand transmitter and the mirror.
• 10205247Traffic information service and posibly the voice control, nonfunctional after navigation software update.
• 10205239"Anti-theft protection activated".
• 10205237The COMAND unit does not start or the display remains dark.
• 10205236"Metadata loss- Please reimport all media data".
• 10205234Software update of COMAND Online control unit.
• 10205233Mobile phone cotacts are not transferred completely.
• 10205229No/poor radio reception in AM frequency range.
• 10205228No/poor radio reception in AM frequency range.
• 10205147Ticking or pulsing noise from high-pressure pump and/or fuel injectors.
• 10186142Unmotivated Reaction from Park Assist - model series 213 facelift / 238 facelift with option code 235 (active par- king assist) and option code 501 (surround view system)
• 10186141NTG5.5: Incorrect time shown on instrument cluster, COMAND display, and analog clock
• 10186135If the customer brakes sharply from a speed of > 30mph, without ABS intervention, there is a single cracking noise from the area of the ESP hydraulic unit

Every Mercedes-Benz E550 model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.