2011 Peterbilt 320
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Peterbilt › 320 › 2011
These records cover every 2011 Peterbilt 320. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2011 Peterbilt 320. Newest first.
PACCAR Incorporated (PACCAR) is recalling certain 1990-2020 Peterbilt 320 and 520 vehicles built with specific amber rear turn signals. The turn signals may also light up with the stop/tail lights when the brakes are applied. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps…
Risk and remedy
Risk
Rear Turn signals that illuminate at the same time as the brake lights may create confusion and impair the effectiveness of the brake lights, increasing the risk of a crash.
Remedy
PACCAR will notify owners, and for trucks with rear amber lights, dealers will add a jumper harness between the chassis electrical harness and amber tail lights, free of charge. The recall began August 1, 2019. Owners may contact PACCAR customer service at 1-940-591-4220. PACCAR's number for this recall is 19PBC.
PACCAR Incorporated (PACCAR) is recalling certain model year 2010-2016 Kenworth T440, T800, and W900 trucks manufactured August 31, 2009, to April 20, 2015, and 2008-2015 Peterbilt 320, 337, 348, 365, 382, and 384 trucks manufactured July 27, 2007, to April 28, 2015, and equipped with certain Cummins Westport ISL G engines. Excessive engine crankcase…
Risk and remedy
Risk
If engine oil comes into contact with a hot surface, there is an increased risk of a fire.
Remedy
Cummins will notify owners on behalf of PACCAR, and Cummins service centers will administer the repairs which include securing the ends of the 90-degree elbow and reprogramming the electronic control module (ECM) with software that can adjust the engine output under misfire conditions to limit crankcase pressures. These repairs will be performed free of charge. The recall began on June 12, 2015. Owners may contact Kenworth customer service at 1-425-828-5000, Peterbilt customer service at 1-940-591-4000 or Cummins Inc. at 1-800-343-7357. PACCAR's number for this recall is 15KWH and 515-G.
PACCAR Incorporated (PACCAR) is recalling certain model year 2009-2015 Peterbilt 320, 365, 367, 388, and 389 trucks manufactured July 21, 2008, to February 28, 2014. The front axle tie rod end clamp bolts may be improperly torqued.
Risk and remedy
Risk
Undertorqued tie rod end clamp bolts are susceptible to corrosion, which may cause loose bolts to separate resulting in a loss of vehicle control and an increased risk of a crash.
Remedy
PACCAR will notify owners, and dealers will replace the front axle tie rod assembly on any vehicle where the factory installed assembly has not been previously replaced, free of charge. Owners were mailed interim notices on May 11, 2015. The recall began on April 4, 2016. Owners may contact Peterbilt customer service at 1-940-591-4220. PACCAR's number for this recall is 215-C.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10188550Information Only Windshield washer pumps have a high No Trouble Found rate. Washer pumps may fail to spray due to a clogged filter.
- 10177021Information Only: This bulletin provides dealers with a battery warranty quick reference guide to ensure the appropriate tests for battery warranty are performed in order to prevent battery warranty claims filed with incorrect or incomplete information.
- 10177019Fix as Fail: For all conventional models, except 387/587, equipped with Side-of-Cab (SOC) exhaust and built from 03/6/2006 to 1/20/2020, the clamps that secure the SOC exhaust stacks may not be tightened properly. This may allow the exhaust stack to rotate and contact the cab or sleeper.
- 10176033Information only: Hendrickson Softek front axle maintenance intervals and requirements.
- 10173212Information Only Vehicles may have the connector seals on the wheel speed sensor incorrectly installed, which may lead to water intrusion and corrosion in some vehicles.
- 10173205Information Only: Proper jump-starting voltage will eliminate high voltage related issues and equipment damage.
- 10172036Information Only: Vehicles may have the connector seal on the wheel speed sensor incorrectly installed, which may lead to sensor corrosion.
- 10169787Information Only - Vehicles built with NAMUX software from 2013 to present may experience accuracy issues with the tachometer. The issue can be temporarily resolved using any one of the included procedures.
- 10169784Fix as Fail: Peterbilt has initiated an improvement to the Model 320/520 power window module. A vapor barrier will be installed over the module to prevent moisture.
- 10168707Information only: Some model 320 and 520 vehicles built before 3/11/2019 may experience loss or loosening of doghouse insulation. Reference the procedure in the attachment section to properly remove and replace the insulation.
- 10168703Information Only: This bulletin provides guidance for repairing an air-conditioning system after internal failure of the A/C compressor.
- 10165583Information Only This bulletin provides information about the California Air Resources Board (CARB) Periodic Smoke Inspection Program (PSIP) and Heavy Duty Vehicle Inspection Program (HDVIP).
- 10164375Fix-As-Fail: Two separate causes have been identified as root cause of intermittent low coolant indicator illumination.
- 10163418Safety Recall: Vehicles fail to confirm with FMVSS/CMVSS No 108 Table 1-a requirements which requires 2 red stop lamps. Vehicles were equipped with additional amber stop lamps which may illuminate when the brake is applied, and may confuse other drivers. Resolution is to remove the amber stop lamps and associated wiring.
- 10162392Information Only - Quick Reference Guide for Electric harness damage repairs.
- 10159674Information Only: Proper instructions for closure of power distribution box cover to prevent corrosion.
- 10154733Information: Bendix ACOM Software version 6.16.5.0 for diagnostics may introduce an unrecoverable error. Notice to dealers to replace this version with older software version until Bendix introduces new version.
- 10143649Information - Recommended Practices for Updating ESA Software
- 10118723Fix-As-Fail: Repair for horizontal exhaust diffuser configurations with broken brackets or cracked diffuser.
Every Peterbilt 320 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.