2015 RAM 5500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2015 RAM 5500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
8 recalls name the 2015 RAM 5500. Newest first.
Chrysler (FCA US, LLC) is recalling certain 2012-2021 RAM 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles. Incorrect information in the Service and Owner's Manuals may cause the flanged lug nuts to be over-tightened, which could result in a broken wheel stud and possible wheel separation.
Risk and remedy
Risk
Wheel separation can cause a vehicle crash.
Remedy
Dealers will update the torque specification in the owner's manual and other published service documents. Dealers will also inspect the vehicle's wheel studs, replacing them if necessary, free of charge. Owner notification letters were mailed on November 30, 2021. Campaign Y36 owner notification letters were mailed on November 30, 2021. Campaign Y26 owner notification letters were mailed on December 1, 2021. Owners may contact FCA US customer service at 1-800-853-1403. FCA US's numbers for this recall are Y26 and Y36.
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb)…
Risk and remedy
Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from…
Risk and remedy
Risk
If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Remedy
Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Chrysler (FCA US LLC) is recalling certain 2016-2017 Ram 3500 Cab Chassis with a Gross Vehicle Weight Rating (GVWR) of less than 10,000 lbs, 2011-2017 Ram 3500, 4500 and 5500 Cab Chassis vehicles, 2009-2017 Ram 1500 and 2010-2017 Ram 2500 and 3500 pickup trucks, all equipped with a column shifter. Pushing the brake pedal for prolonged periods when the…
Risk and remedy
Risk
Being able to shift the transmission without pushing the brake pedal and/or without a key in the ignition can increase the risk of an unintended vehicle rollaway that may result in personal injury or a crash.
Remedy
Chrysler will notify owners, and dealers will update the vehicle software, inspect the BTSI, and, as necessary, replace it, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T79.
Chrysler (FCA US LLC) is recalling certain 2013-2017 RAM 2500, 3500, 3500 Cab Chassis, 4500 Cab Chassis, and 5500 Cab Chassis vehicles, equipped with Cummins 6.7L Turbo Diesel engines that have Concentric-brand water pumps without a vent hole. These water pumps may leak coolant.
Risk and remedy
Risk
The leaking water pump can increase the risk of an engine compartment fire.
Remedy
Chrysler will notify owners, and dealers will replace the water pumps, free of charge. The recall began February 26, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T51.
Chrysler (FCA US LLC) is recalling certain model year 2015 Ram 4500, and 5500 pickup trucks manufactured January 30, 2015, to February 6, 2015. The affected vehicles may have inadequate penetration of the front upper control arm loop to spacer weld, reducing the front suspension stability.
Risk and remedy
Risk
A reduction of suspension stability control could affect control of the vehicle, increasing the risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect and replace any affected upper control arms, free of charge. The recall began on September 17, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R34.
Chrysler (FCA US LLC) is recalling certain model year 2013-2015 Ram 1500, 2500, 3500, 4500, and 5500, 2015 Chrysler 200, Chrysler 300, Dodge Charger, and Dodge Challenger, 2014-2015 Jeep Grand Cherokee, Cherokee, and Dodge Durango, and 2013-2015 Dodge Viper vehicles. The affected vehicles are equipped with radios that have software vulnerabilities that can…
Risk and remedy
Risk
Exploitation of the software vulnerability may result in unauthorized remote modification and control of certain vehicle systems, increasing the risk of a crash.
Remedy
Chrysler will notify and mail affected owners a USB drive that includes a software update that eliminates the vulnerability, free of charge. Optionally, owners may download the update to their own USB drive from http://www.driveuconnect.com/software-update/ or take their vehicle to a Chrysler dealer for immediate installation. In an effort to mitigate the effects of this security vulnerability, Chrysler has had the wireless service provider close the open cellular connection to the vehicle that provided unauthorized access to the vehicle network. This measure may not have been implemented on all vehicles and does not address access by other means that will be remedied by the software update. The recall began on August 25, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R40.
Chryser (FCA US LLC) is recalling certain model year 2014-2015 Ram 4500 and 5500 cab chassis trucks manufactured August 20, 2013, to January 27, 2015 and equipped with 6.4L Hemi engines. The affected vehicles have a maximum governed speed of 106 mph but are fitted with tires that are only rated for a maximum speed of 87 mph.
Risk and remedy
Risk
If the vehicle exceeds the tires' maximum speed rating, the tires may suddenly fail, increasing the risk of a crash.
Remedy
Chrysler has notified owners, and dealers will correct the electronic control unit software to limit the vehicle's speed to 87 mph, free of charge. The recall began on June 10, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R17.
Owner complaints
13 complaints1 involved a fire
What owners report most
Latest complaints
- Engine
Intake air grid heater nut came off and blew the #6 piston and engine needs to be replaced.
- Wheels
While traveling on a highway at speeds in excess of 50mph the 2015 Ram 5500 lost the rear set of dual tires on the passenger side. The wheels came off after all 10-wheel studs failed and broke off. This is the second incident on this same truck despite going through the warranty process and procedures through Stellantis/Ram. No incident or injuries resulted from the failure.
- Fuel system, diesel › Fuel injection system › Fuel rail · Power train › Transfer case (4-wheel drive)
The contact owns a 2015 Ram 5500. The contact stated while driving 69 MPH, the vehicle started vibrating abnormally with abnormal sounds coming from the vehicle. There was no warning light illuminated. The contact was able to park on the side of the road, exited the vehicle, and noticed…
The contact owns a 2015 Ram 5500. The contact stated while driving 69 MPH, the vehicle started vibrating abnormally with abnormal sounds coming from the vehicle. There was no warning light illuminated. The contact was able to park on the side of the road, exited the vehicle, and noticed transmission fluid leaking underneath the vehicle. The contact stated that the transfer case was fractured. The contact was unable to restart the vehicle. The contact stated that the fuel rail, Service 4-WD, and the braking system messages were displayed. The vehicle was not drivable. The contact towed the vehicle to an independent mechanic and was informed that the transfer case needed to be replaced. The vehicle was not diagnosed or repaired. A dealer was not contacted. The manufacturer had not been informed of the failure. The failure mileage was approximately 137,000.
- Engine
Vehicle is 2015 and has 44.4k miles on it. Had it in for a routine oil change and the mechanic showed me that the oil pan is in extremely poor condition with multiple rot spots all over and could fail at anytime. Mopar extended warranty covers oil pans, but they dont cover rust. An oil pan is a…
Vehicle is 2015 and has 44.4k miles on it. Had it in for a routine oil change and the mechanic showed me that the oil pan is in extremely poor condition with multiple rot spots all over and could fail at anytime. Mopar extended warranty covers oil pans, but they dont cover rust. An oil pan is a static part, the only way it could fail is from rust or a catastrophic engine failure where a connecting rod may protrude through it. Seems to be a common problem with these oil pans failing at a high rate. I have a 1977 chevy 289k miles with no problems on that oil pan. Perhaps the metal used in production was of poor quality which caused premature and expedited corrosion.
- Electrical system · Power train
Have had shifting issue's in the past, repair under warranty was trans solenoids. Now, out of warranty, it's the trans wiring harness.
- Electrical system · Engine · Unknown or other
The dpf filter IS saying that its clogged and it won't regin. codes: p0234, p24a2,p0420,p0087,p2228,p1193,p243f,p0102,p203f,p2280
- Electrical system · Power train · Service brakes
Truck was on highway going 70 mph. driver said it started shaking very hard and then heard a very loud bang. was able to keep it under control and bring it to a stop. there were parts of the transfer case all over the road. Drive shaft was bent at a 45 degree angle. wiring was wrapped around yoke, underneath of cab IS damaged, brake system damaged, def system damaged, along with other problems that cant be seen.
- Engine
Vehicle was taken to the dealership due to an issue where white smoke would appear when the engine IS under load. Dealer was unable to repair the issue due to scheduling conflicts. Owner attempted to drive the vehicle to another location for diagnostics. Vehicle caught on fire on the way to another dealer location.
- Steering
Steering drag link broken off on passenger (long arm) side of adjustment sleeve. No impact damage. Part appears to have been improperly manufactured. Only approx 1/3 to 1/2 of the rod was fused together (see picture). vehicle was backing up and turning in a parking lot, slightly downhill with service brakes lightly applied. vehicle IS heavily loaded (electrical bucket truck)
- Engine
TL* the contact owns a 2015 RAM 5500. Upon inspection, the contact noticed coolant leaking from the vehicle. The vehicle was taken to fields chrysler jeep dodge-sanford (750 towne center blvd, sanford, fl), but a leak could not be found. Afterwards, the low coolant indicator illuminated. The…
TL* the contact owns a 2015 RAM 5500. Upon inspection, the contact noticed coolant leaking from the vehicle. The vehicle was taken to fields chrysler jeep dodge-sanford (750 towne center blvd, sanford, fl), but a leak could not be found. Afterwards, the low coolant indicator illuminated. The contact checked the engine compartment and noticed that coolant spewed out onto the undercarriage and electrical wiring. The local dealer (brewbaker dodge chrysler jeep RAM of prattville, 2209 cobbs ford rd, prattville, al) diagnosed that the water pump was defective and needed to be replaced. The vehicle was repaired, but the failure recurred. The vehicle was taken to orlando dodge chrysler jeep RAM (4101 w colonial dr, orlando, fl) where it was initially diagnosed as muddy water on the motor. The failure became more severe after one week. The vehicle was returned to orlando dodge chrysler jeep RAM and the water pump was replaced. The contact received notification of nhtsa campaign number: 17v562000 (engine and engine cooling); however, the parts to do the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Orlando dodge chrysler jeep RAM confirmed that the parts were not available for the recall remedy. The manufacturer was notified of the failure and the contact was referred back to the dealer. The manufacturer was not able to confirm when the parts were to become available. The approximate failure mileage was 50,000. Vin tool confirms parts not available.
- Electrical system
Battery saver mode msg appeared on dash. Truck had 87,000 miles and 2400 hours. Used as a roadside service wrecker. Tested batteries. 1 tested bad. Replaced both batteries. Message comes back at startup on cold mornings. Msg stays on until truck IS warmed later in the day.
- Suspension · Wheels
Front tires uneven wear, tire cupping. Vibration and noisy!
- Tires
Front tires. Tires wear uneven. Mostly passenger side. Cupping of of both. Noticeable vibration. Same thing happened with my 2011 model of the same vehicle.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Post Recall Remedy Brake Transmission Shift Interlock (BTSI) Failure
The Office of Defects Investigation (ODI) has received 14 Vehicle Owner Questionnaire (VOQ) reports and 6 EWR Death & Injury (D&I) reports describing post recall remedy failures of the brake transmission shift interlock (BTSI) system in certain Model Year (MY) 2013-2018 RAM pickup trucks.The subject vehicle models…
The Office of Defects Investigation (ODI) has received 14 Vehicle Owner Questionnaire (VOQ) reports and 6 EWR Death & Injury (D&I) reports describing post recall remedy failures of the brake transmission shift interlock (BTSI) system in certain Model Year (MY) 2013-2018 RAM pickup trucks.The subject vehicle models include 1500, 2500, 3500, 4500, and 5500 trucks equipped with a column mounted shift lever.The failures of the BTSI described in the VOQs occurred on vehicles that had all previously been repaired under recall 17V-821 or 18V-100.Both recalls address a potential condition which can cause the BTSI locking pin to become stuck allowing the transmission to be shifted out of Park without depressing the brake pedal and/or without having a key in the ignition.Shifting the transmission out of Park when not having the brake pedal depressed can result in a vehicle rollaway. ODI is opening this Recall Query (RQ) to review the effectiveness of the 17V-821 and 18V-100 recall remedies, understand the root cause of additional vehicle rollaway incidents, and identify any other possible root cause that may affect the performance of the BTSI system. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
- Front Driveshaft Failure
On December 12, 2019, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 19-017 after receiving three Vehicle Owner Questionnaire (VOQ) reports alleging failures of the front driveshaft and/or transfer case, resulting in conditions of 1) a loss of engine power, 2) loss of steering assist…
On December 12, 2019, NHTSA's Office of Defects Investigation (ODI) opened Preliminary Evaluation (PE) 19-017 after receiving three Vehicle Owner Questionnaire (VOQ) reports alleging failures of the front driveshaft and/or transfer case, resulting in conditions of 1) a loss of engine power, 2) loss of steering assist, 3) loss of foundation brakes, 4) unintended air bag deployment and 5) engine/cab fires from combustible fluids striking hot exhaust components. The VOQs involved model year (MY) 2015 through 2017 RAM 4500 and 5500 vehicles. ODI received information from the vehicle manufacturer [Fiat Chrysler Automobiles (FCA)] via information request letters dated February 28, 2020, and April 21,2020. Supplemental information was received on March 17, 2021. A review of the responsive manufacturer information, and related meetings and presentations, showed that the transfer case failures in 97.5% of the claims did not disable the vehicle. Since analysis showed that a failed driveshaft could result in catastrophic damage to the transfer case as well as other safety risks (i.e. steering/brake failures etc.), ODI shifted the investigation to focus only on the front driveshaft failures. The double cardan universal joint design requires maintenance lubrication within every 8000 miles. Despite an under-hood maintenance reminder label and professional servicing at both dealers and independent repair facilities, the driveshafts were often found to be unlubricated due to lack of awareness, difficulty of the operation or the lack of the special tools needed to perform the work. To increase the maintenance lubrication rates, in the summer of 2021, FCA launched a communications campaign, circulating awareness bulletins, training information, special tool options and instructional videos through more than a dozen channels covering both dealer and independent repair facilities. Additionally, in the fall of 2021, FCA mailed a VIN-specific letter to each registered owner reminding them of the maintenance needs, and also sent a special grease gun adapter to every FCA US dealer and fleet operator with an FCA US dealer code. Since January 2022,NHTSA has not received a complaint of front driveshaft failure due to lack of lubrication that can lead to failure conditions such as loss of engine power, loss of steering assist, loss of foundation brakes, unintended air bag deployment and engine/cab fires. This drop in complaints, the communications campaign launched by the manufacturer, and the absence of reports from the manufacturer, support the closing of this Preliminary Evaluation. The closing of this investigation does not constitute a finding by NHTSA that a safety-related defect does not exist. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
- Software security vulnerability
On July 23, 2015, Fiat Chrysler Automobiles (FCA) launched Safety Recall 15V-461 to remedy security vulnerabilities in approximately 1.4 million model year (MY) 2013 through 2015 vehicles equipped with Uconnect head units (HU) 8.4A (RA3 radio) and 8.4AN (RA4 radio) manufactured by Harman International.On July 24…
On July 23, 2015, Fiat Chrysler Automobiles (FCA) launched Safety Recall 15V-461 to remedy security vulnerabilities in approximately 1.4 million model year (MY) 2013 through 2015 vehicles equipped with Uconnect head units (HU) 8.4A (RA3 radio) and 8.4AN (RA4 radio) manufactured by Harman International.On July 24, 2015, the Office of Defects Investigation (ODI) opened Recall Query, RQ 15-004, to investigate HU security vulnerabilities and remedy effectiveness in the recalled population and to determine whether similar units have been supplied for use in other FCA vehicles.In an August 11, 2015 letter, FCA submitted a second Part 573 safety recall report expanding the scope of the Uconnect RA4 model radio to include additional 7,810 MY 2015 Jeep Renegade vehicles manufactured from September 18, 2014 through June 25, 2015 (Recall 15V-508).Scope analysis indicated that Uconnect radios installed in FCA vehicles not included in recalls 15V-461 or 15V-508 (subject recalls) are not equipped with built-in cellular access or short range wireless communication features and, thus, do not contain the security vulnerabilities addressed by the subject recalls. SUBJECT VEHICLES: MY2014 through 2015 Dodge Durango, Jeep Grand Cherokee and Jeep Cherokee sport utility vehicles; MY2013 through 2015 Ram 1500, 2500, 3500 and 4500/5500 pickup trucks; MY2013 through 2015 Dodge Viper vehicles; and MY2015 Chrysler 200, 300, Jeep Renegade, Dodge Charger and Challenger vehicles.According to FCA, long and short range wireless vulnerabilities identified in the recalled vehicles could allow unauthorized third-party access to, and manipulation of, networked vehicle control systems.Successful exploitation of the vulnerabilities, coupled with reverse engineering of networked microprocessor control modules, could result in unauthorized manipulation of vehicle control systems. This unauthorized manipulation of vehicle controls and systems could expose the driver, vehicle occupants or other highway users to an increased risk of injury.FCA and its network provider, Sprint, conducted a nationwide campaign to block access to a radio communications port that was unintentionally left open.On July 27, 2015, short range wireless vulnerabilities were also blocked.Finally, third party security evaluation and regression testing identified vulnerabilities that were either remedied by Sprint or through updates to the FCA Uconnect software.ODI identified a total of 30 complaints or field reports on unique vehicles submitted by FCA (29) or received by NHTSA (1) alleging incidents of theft from a vehicle or anomalous performance that the owner alleged were caused by, or may have been caused by, remote hacking.Twenty-six (87%) of these reports were submitted after a magazine article was published on July 21, 2015, describing the remote hacking of an FCA vehicle by researchers who were able to affect the operation of various vehicle control systems, including the service brakes, steering, throttle and ignition.Most of the complaints involved vehicle systems that were not safety critical (e.g., complaints related to radio, navigation system, or air-conditioning control) and did not affect vehicle control.Three complaints reported engine stalls.One owner reported sudden unintended acceleration allegedly related to hacking.None of the complaints or field reports reviewed involved the steering and braking vehicle control effects demonstrated by the research hackers prior to the recall.There were no confirmed incidents of hacking in any of the records reviewed by ODI.The remedies completed by Sprint and FCA appear to have eliminated vulnerabilities that mi
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11001020On Board Diagnosis (OBD) Monitor Readiness Information
- 10251783Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10244356LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10243209FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
- 10243208Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
- 102427956.7L New Oil Usage Information Incorrect oil used. This bulletin provides information regarding the correct oil grade to use on the 6.7L Cummins used in the 2023 to 2013 HD Trucks. The following information is intended to eliminate confusion.
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10239957Water Quality When Mixed With Engine Coolant
- 10236933wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
- 10234420Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10231978Uconnect Access Buttons On The Rear View Mirror Are Inoperative
- 10230342Cummins 6.7L Turbocharger Actuator - X93 Warranty Extension This bulletin involves replacing the turbocharger actuator with an updated actuator. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technicianmay find that one or more of the following DTCs have been set: U010C - Lost Communication With Turbocharger/Supercharger Control Module. P003A - Turbocharger Boost Control Module Position Exceeded Learning Limit. P00AF - Turbocharger Boost Control Module Performance. P0046 - Turbocharger Boost Control Circuit Performance.
- 10230189Left Hand Drivers Side Mirror Takes Longer to Defrost Or Clear Than Right Side Passenger
- 10230183No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration
- 10230180Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
- 10229993NUT, Wheel Flange Wheel Nut Service Torque should be 175 N-M.
- 10229988NUT, Wheel Flange Wheel Nut Service Torque should be 190 N-M.
- 10229920RA3 RA4 Radio Enhancements This bulletin involves inspecting and, if required, updating the radio software. A small number of customers may experience one or more of the following: Low battery condition due to the radio remaining powered up after the ignition has been turned off (U.S Markets Only). The Radio may switch from SiriusXM to an AM station by itself. Uconnect registration always present, can not remove Uconnect account. Teleprompter does not appear when pressing the Voice Recognition (VR) button. VR operation cancels while in media mode. Radio may display previous cameras image before displaying the current image.
- 10229890RA2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: Not able to change state of heated seats and/or steering wheel during stop event on Stop/Start vehicles. Touchscreen confirmation beep may be too loud (Grand Cherokee only). U0208-00 - Loss Communication With Heated Seat Control Module (Cherokee only).Improvements: Only allow vehicle settings to be changed in run mode. To help insure settings are properly saved. Always gray out text message soft keys for non-supporting devices. Voice Recognition (VR) improved accuracy.
- 10229888RG2 Or RJ2 Radio Software Enhancements This bulletin involves updating the radio's software. A customer may have experience one or more of the following: Not able to change state of heated seats and/or steering wheel during stop event on Stop/Start vehicles. Touchscreen confirmation beep may be too loud. The radio does not allow selection of the Polish language. The radio fan continually runs at high speed. Customer perception may be the radio fan is too loud.Improvements: Only allow vehicle settings to be changed in run mode. To help insure settings are properly saved. Always gray out text message soft keys for non-supporting devices. Voice Recognition (VR) improved accuracy.
- 10229572Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10229454Cooler - egr
- 102293416.7L New Oil Usage Information This bulletin provides information regarding the correct oil grade to use on the 6.7L Cummins used in the 2019 and newer HD Trucks. The following information is intended to eliminate confusion.
- 10229248Diesel Exhaust Fluid (DEF) Level Gauge Inaccurate Or Stuck This bulletin involves verifying the correct DEF level in the tank and if necessary, replacing the DEF pump module. A small number of customers may comment that their DEF level gauge is stuck for long periods of time or is erratic. The customer may also experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation a technician may find one or more of the following Diagnostic Trouble Codes (DTCs). ? P203B - Reductant Level Sensor Circuit Performance ? P203C - (Diesel Exhaust Fluid) Reductant Level Sensor Circuit Low. ? P203D - (Diesel Exhaust Fluid) Reductant Level Sensor Circuit High.
- 10229185Flash: 6.7L Diagnostic And System Improvements This bulletin involves reprogramming the Engine Control Module (ECM) with the latest available software. Several software improvements are available for vehicles equipped with a Cummins 6.7L turbo diesel.
- 10229118Cummins 6.7L Turbocharger Actuator - X93 Warranty Extension This bulletin involves replacing the turbocharger actuator with an updated actuator. Customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the technicianmay find that one or more of the following Diagnostic Trouble Codes (DTCs) have been set: U010C - Lost Communication With Turbocharger/Supercharger Control Module. P003A - Turbocharger Boost Control Module Position Exceeded Learning Limit. P00AF - Turbocharger Boost Control Module Performance. P0046 - Turbocharger Boost Control Circuit Performance. P0234 - Turbocharger Overboost Condition.
- 10229031Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10228142Pentastar Oil Filter Adapter
- 10228135RA3/RA4 Radio Software Enhancements
- 10228134RA3/RA4 Radio Software Enhancements
- 10228123Center Console Lid Binding This bulletin involves adding a rubber bumper to the console lid to prevent the lid from binding. **This bulletin will help prevent a binding or an audible clicking noise in the center console lid. NOTE: Do not attempt to fix a center console lid that has an existing binding or audible condition by adding the bumper.**
- 102280983.2L - 3.6L Cylinder Head Assy Multiple cylinder head replacement. If cylinder head is replaced on a vehicle more than 1 time for any reason, please call any of the following people.~ First: Ron Dallison ? Cell (248) 292-9510 Ron.dallison@fcagroup.com ~ Second: Joe Lovell - Cell (734) 309-6467 joe.lovell@fcagroup.com~ If a response is not received within 15 mins, then proceed with the necessary repair.~
- 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- 10226283Center Console.
- 10226281Diagnosing A Urea Module That Is Exposed To Diesel Fuel This bulletin involves discussing what will happen to the rubber material used in the urea pump when exposed to diesel fuel. This unit is sometimes referred to as the Selective Catalyst Reductant (SCR) module or the Adblue Delivery Module (ADM). Units exposed to hydrocarbons have a particular failure mode, the rubber heater unit is crinkled and in some cases the metal heater protrudes through the rubber membrane. The rubber material used in this unit is designed to withstand Diesel Exhaust Fluid (DEF) only. Exposure to fluids that contain hydrocarbons (i.e. diesel fuel) will damage the unit beyond repair. Units returned that exhibit this failure mode will have warranty claims that are rejected. Units that exhibit this failure mode should be considered customer abuse and should not be covered under warranty. Use the Hydroscopic test paper (P/N 223-44-863) available through MoparEssentialTools.com to confirm exposure.
- 10226002Guidelines For The Use Of Alternative Diesel Fuels.
- 10225424Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10225287Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
Every RAM 5500 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.