2000 Toyota Corolla
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Toyota › Corolla › 2000
These records cover every 2000 Toyota Corolla. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
5 recalls name the 2000 Toyota Corolla. Newest first.
Ride control IS recalling certain front strut mounts branded as gabriel ride control or arvinmeritor, p/nos. 142435, 142193, 142305, 142303, sold as replacement equipment for the vehicles listed above. the affected front strut mounts did not contain a weld joint between the bearing housing and the rate plate.
Risk and remedy
Risk
The absence of the weld can allow the strut to come out of its mounting position under certain extreme driving conditions which could cause damage to surrounding vehicle components increasing the risk of a crash.
Remedy
Ride control will notify owners of record and replace the affected parts free of charge. the safety recall began on march 15, 2010. owners may contact ride control at 1-248-458-1396.
Sabersport IS recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
K2 motor IS recalling 1,921 aftermarket headlamps of various models sold for use on the above listed vehicles. these headlamps are missing the amber side reflex reflector which fails to conform with the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment."
Risk and remedy
Risk
Without the amber side reflex reflectors, the lighting visibility may be affected, possibly resulting in a vehicle crash.
Remedy
K2 motor will notify owners and offer a full refund. the recall began on decemeber 17, 2008. owners may contact K2 motor at 1-909-839-2992.
Certain aj motorsport combination lamps sold as replacement lamps for use on the above listed passenger vehicles. combination lamps not equipped with amber side reflectors fail to conform with the requirements of federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Lack of amber side reflectors in the lamps will decrease lighting visibility to other drivers and may possibly result in a vehicle crash.
Remedy
Aj motorsport will notify owners and offer reimbursement for the lamps. the recall began on july 31, 2006. owners may contact aj motorsport at 626-618-2026.
Certain pro-a motors corner lamps, turn signals, and headlights sold as replacement lamps for use on certain passenger vehicles listed above. some combination lamps that are not equipped with amber side reflectors fail to conform to federal motor vehicle safety standard no. 108, lamps, reflective devices, and associated equipment.
Risk and remedy
Risk
Without the amber reflectors, the vehicle will be poorly illuminated, possibly resulting in a vehicle crash without warning.
Remedy
Pro-a motors will notify owners and offer to repurchase the lamps. the recall began on april 3, 2006. owners may contact pro-a motors at 323-838-2988.
Owner complaints
145 complaints22 involved a crash3 involved a fire18 injuries1 deaths
What owners report most
Latest complaints
- Electrical system
The contact owns a 2000 Toyota Corolla. The contact stated that while the vehicle was parked and unoccupied for under an hour, a fire started inside the cabin of the vehicle. The fire was self-extinguished. Neither a Fire Department nor a Police report was filed. The vehicle was not destroyed…
The contact owns a 2000 Toyota Corolla. The contact stated that while the vehicle was parked and unoccupied for under an hour, a fire started inside the cabin of the vehicle. The fire was self-extinguished. Neither a Fire Department nor a Police report was filed. The vehicle was not destroyed; however, the middle interior of the center console was destroyed. The vehicle was towed to the residence, and an independent mechanic inspected the vehicle and informed the contact that the fire had originated in the power outlet. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was 200,000.
- Engine
2000 toyota corolla burning excessive amounts of oil. I'm having to add a quart everytime I put gas in. I drive from destination to destination for work and having to oil IS a safety concern as the light does not come on until it IS empty.
- Seat belts · Structure › Body
I own a 1998 corolla and a 2000 corolla both have drivers seat belt issuses. In each case the belt receiver will not latch
- Air bags
Takata recall: I did not receive a recall notice about my airbags and I'm trying to find out if my car was ever recalled for defective airbags. toyota will only tell me if the car IS under a recall presently. if it ever was, the notice might have been sent to the previous owner that I bought the car from in 2001. If there ever was a recall on the airbags, doesn't toyota still need to replace them??
- Engine and engine cooling
2000 toyota corolla. consumer writes in regards to while driving vehicle check engine warning light illuminated, followed by heavy smoke pouring from underneath hood and noticed radiator cap was missing due to a negligent act by an establishment who serviced his vehicle.. *ld the radiator cap…
2000 toyota corolla. consumer writes in regards to while driving vehicle check engine warning light illuminated, followed by heavy smoke pouring from underneath hood and noticed radiator cap was missing due to a negligent act by an establishment who serviced his vehicle.. *ld the radiator cap was not secured after having an oil change. two independent mechanics stated the head gasket was completely destroyed and the engine block was warped and a complete engine replacement was needed as a direct result of neglecting to place the radiator cap back on the radiator. *Jb
- Engine
The 1zzfe engine design burns exessive amounts of oil. known to have poor ring design. toyota refuses to honor warranty. now I am up to 1 quart consumption per tank of fuel.
- Air bags
TL* the contact owns a 2000 toyota corolla. The contact received a notification of nhtsa campaign number: 15v286000 (air bags) however, the recall part was not available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not notified of the issue. The contact had not experienced a failure.
- Structure › Body
The headliner on the back side of the vehicle IS coming apart
- Engine and engine cooling
2000 toyota corolla. consumer writes in regards to cam belt fractured, ruining the engine. *smd
- Seat belts
Tl*the contact owns a 2000 toyota corolla. The contact stated that the vehicle's seat belt failed to latch and restrain the driver. The failure recurred on several occasions. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was 135,000.
- Suspension
2000 toyota corolla. Consumer asking for reimbursement for vehicle repairs from a recall issued for vehicle. *Ta consumer sent additional correspondence. *smd the consumer stated it cost $930 to replace both struts. *Jb updated 01/22/15. *Jb
- Engine
Excessive oil consumption issue on our 2000 toyota corolla. check engine light IS on and indicates needing a new catalytic converter. however, that IS an effect of the cause of excessive burning of oil. I add approx 1-2 quarts of oil every 250-400 miles. if highway driving, I easily add 1…
Excessive oil consumption issue on our 2000 toyota corolla. check engine light IS on and indicates needing a new catalytic converter. however, that IS an effect of the cause of excessive burning of oil. I add approx 1-2 quarts of oil every 250-400 miles. if highway driving, I easily add 1 quart of oil every 100 miles of driving. this appears to be an issue with 1zz-fe 1.8L engines from 1998-2002 based on numerous complaints of exactly the same issue. since this condition does not manifest itself until out of the powertrain warranty, this will never be a warranty or recall issue unless toyota admits there was a design flaw. *tr
- Electrical system · Exterior lighting
Driving to work going 55 mph about 10 minutes into my trip I smelled a burning smell and I soon didn't have any headlight or daytime running light.took to repair shop,they replace drl module but as soon as it was connected,that new module burnt also,so I can only drive my car during daytime,i have no headlight at all,i only have signal lights and brake light.could this be a manufacturing defect. *tr
- Power train
TL* the contact owns a 2000 toyota corolla. The contact stated that the shift interlock lever malfunctioned, causing the vehicle to roll back ward after being secured it park. The vehicle was not taken to the dealer. The manufacturer was made aware of the failure. The vehicle was not repaired. The failure and current mileage was 110,000.
- Electronic stability control (esc) · Steering · Vehicle speed control
I purchased a used 2000 toyota corolla from a dealership in the area in april 2013 - I found that when driving in excess of 65 mph, the car started shaking and controlling it was difficult - IS there a possible recall of this year/make/model that was never fixed? *tr
- Fuel/propulsion system · Suspension · Unknown or other
The vehicle keeps bogging out. The fuel system keeps failing and the struts sound and feel like they are going to collapse
- Steering
It appears as if the steering wheel IS not in proper control and vehicle seems to wander at higher speeds. When making turn, at times the vehicle will turn a lot and sometimes it would turn in lot lesser i.e. I would not have proper judgment of how much vehicle would turn and this becomes very…
It appears as if the steering wheel IS not in proper control and vehicle seems to wander at higher speeds. When making turn, at times the vehicle will turn a lot and sometimes it would turn in lot lesser i.e. I would not have proper judgment of how much vehicle would turn and this becomes very much evident when making turn at slightly higher speeds then 30-35 miles/hour.. I have done everything my dealer and my auto mechanics had suggested like changing the tires twice , replacing rotor, brake pads, getting alignment done etc. please let me know if you have any further questions regarding this complaint. *tr
- Tires
Tires driven on local streets and highways for 38,000 miles. all four tires suffered a deep crack, the full circumference of the tire on the inside sidewall approximately one inch above the wheel rim. the failure caused severe handling problems with the car. the tires had on the car for 2 years. *js
- Tires
Tires driven on local streets and highways for 38,000 miles. all four tires suffered a deep crack, the full circumference of the tire on the inside sidewall approximately one inch above the wheel rim. the failure caused severe handling problems with the car. the tires had on the car for 2 years. *js
- Tires
Tires driven on local streets and highways for 38,000 miles. all four tires suffered a deep crack, the full circumference of the tire on the inside sidewall approximately one inch above the wheel rim. the failure caused severe handling problems with the car. the tires had on the car for 2 years. *js
- Tires
Tires driven on local streets and highways for 38,000 miles. all four tires suffered a deep crack, the full circumference of the tire on the inside sidewall approximately one inch above the wheel rim. the failure caused severe handling problems with the car. the tires had been on the car for 2 1/2 years. *js
- Engine and engine cooling › Engine · Engine and engine cooling › Exhaust system · Engine and engine cooling › Exhaust system › Emission control · Engine and engine cooling › Exhaust system › Emission control › Catalytic convertor
I own a 2000 toyota corolla with a 1.8L engine that IS full of sludge and now visibly burns 1 quart of oil every 200-300 miles and will not pass inspection due to the oil being burned in the exhaust. I have had to replace several catalytic converters due to becoming clogged from the amount of oil…
I own a 2000 toyota corolla with a 1.8L engine that IS full of sludge and now visibly burns 1 quart of oil every 200-300 miles and will not pass inspection due to the oil being burned in the exhaust. I have had to replace several catalytic converters due to becoming clogged from the amount of oil burning through the engine. this problem has existed since the car had about 55,000 miles on it and local toyota garage has either denied there being a problem or they have tried to sell me on numerous other expensive repairs such as front and rear main bearings and seals, allegedly warped head, etc. vehicle now has close to 100K miles. the vehicle will not now pass state emissions inspection and IS essentially worthless. there are thousands of like reports in researching but never seems to have been addressed. other models and years have been included in a class action suits that was successful for the exact same issue, but I can't find that this vehicle has been successfully addressed. *kb
- Seat belts
Toyota corolla 2000 gives false seat belt warning. Seat belt warning blinks eventhough seat belt IS secured. False warning (in all the safety regulations that I have studied) IS just as bad since trust can not be relied on. *tr
- Steering
Single vehicle collision involving year 2000 toyota corolla. occupant in vehicle indicates decedent driver made statement that he was unable to turn steering wheel thus causing collision. independent witness following behind the vehicle indicates that vehicle drifted to the side of the road for…
Single vehicle collision involving year 2000 toyota corolla. occupant in vehicle indicates decedent driver made statement that he was unable to turn steering wheel thus causing collision. independent witness following behind the vehicle indicates that vehicle drifted to the side of the road for long period of time immediately prior to collision consistent with a movement which would be caused by a locking and non-functioning steering wheel. we understand other year 2000 toyota vehicles are being recalled with a defect involving a locking of the steering wheel. collision caused one death (driver), two children were sent to the trauma center at uc davis hospital in sacramento california, one adult front passenger remains at uc davis hospital in sacramento california in serious condition. california highway patrol was notified of this information but appears not to be taking any action regarding inspection of vehicle. vehicle and component are preserved intact near sacramento california and are available for inspection. *Tr
- Electrical system · Equipment · Equipment › Recreational vehicle/trailer
I was driving my toyota corolla and everything worked. nothing out of the ordinary happened. I was able to accelerate, brake, listen to the radio, ac on high and get 30mpg in the city. something must be wrong with my car. nhtsa and the media has convinced me that I might die while driving my toyota and yet I feel just as safe as ever. please help me. thank you. *Tr
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
- 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
- 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
- 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
- 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
- 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
- 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
- 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
- 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
- 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
- 10197476Replacement vin plates.
- 10197473Product general information.
- 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
- 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
- 10174891TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
- 10174890TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
- 10171405TSB: Vehicles may display evidence of a fluid leak or fluid seep from powertrain components. This bulletin explains how to determine the differences between a fluid leak versus a fluid seep. Cases that are determined to be a ?leak? should be repaired accordingly and will be covered under warranty if applicable. Cases that are determined to be a ?seep? should be documented on the repair order and inspected at the next service interval. Follow the Repair Information in this bulletin to determine if the concern in question is a fluid leak or fluid seep and review the Repair Procedure section to address the condition. NOTE This bulletin applies to ALL powertrain fluids excluding fuel and coolant.
- 10152205TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
- 10145776Update on Technician Certification Requirements.
- 10145749Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10145748Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10143953TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.
- 10143927TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. T-SB-0043-14. ? Applicability has been updated to include 2017 ? 2018 model year Toyota vehicles. Service Bulletin No. T-SB-0043-14 is obsolete and any printed versions should be discarded. The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system. NOTE New security provisions are required to obtain a reset passcode. It is critical to review the instructions for this new process BEFORE attempting to get a passcode in the new system.
- 10133915Toyota vehicles are equipped with SRS, including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devices did not perform as expected, please follow the steps in the recommendations section below.
- 10133654TSB: REVISION NOTICE November 22, 2017 Rev1: ? Applicability has been updated to include 2014 ? 2018 model year vehicles. Any previous printed versions of this bulletin should be discarded. In the event that a Toyota vehicle becomes submerged in water, many components may be physically damaged. Electrical and electronic components, including wiring harnesses, are particularly susceptible to corrosion and subsequent malfunction. Although any flooding can be damaging, salt water flooding elevates the potential for abnormal conditions and may increase risks due to its highly corrosive and conductive nature. Salt residue also continues to corrode and remain conductive even after a vehicle dries. This bulletin is intended to assist with safe handling and inspection of flood damaged vehicles and to provide basic guidance on likely needed repairs.
- 10133649TSB: OBSOLETE NOTICE November 21, 2017: This bulletin is now obsolete. Please see T-SB-0304-17.
- 10132812Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position Sensor Circuit) and/or P0340 (Camshaft Position Sensor Circuit) due to inconsistent rotational speed of the engine's crankshaft.
- 10132715TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased.
Every Toyota Corolla model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.