2008 Toyota Corolla

Recalls

6 recalls name the 2008 Toyota Corolla. Newest first.

• Air bags › Frontal › Driver side › Inflator module

  Oct 17, 2019NHTSA 19V741000928,220 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2016 4Runner, 2003-2006 Tundra, 2003-2013 Corolla, 2009-2010 Corolla Matrix, 2004-2005 RAV4, 2002-2007 Sequoia, 2011-2013 Sienna, 2008-2012 Scion xB, 2008-2009 Lexus IS-F, 2007-2012 Yaris and Lexus ES350, 2010-2017 Lexus GX460, 2002-2010 Lexus SC430, 2006-2012 Lexus IS250 and IS350…

  Risk and remedy

  Risk

  An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.

  Remedy

  Toyota will notify owners. Depending on the vehicle model, dealers will replace the front driver inflator, front passenger airbag inflator, the airbag assembly, or the front passenger airbag sub-assembly and inflator. The recall began November 20, 2019. Owners may contact Toyota customer service at 1-888-270-9371 or Lexus customer service at 1-800-255-3987. Toyota's numbers for this recall are J0A, J0B, and J0C. Lexus' numbers for this recall are JLI, JLJ, and JLK.

  Full recall details →

• Air bags › Frontal › Passenger side › Inflator module

  Aug 28, 2019NHTSA 19V627000229,460 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2003-2008 Corolla, 2005-2008 Corolla Matrix, and Pontiac Vibe vehicles equipped with a front passenger air bag assembly replaced under a prior recall. The air bag may not unfold as designed during inflation under high temperature conditions, possibly resulting in the air bag not…

  Risk and remedy

  Risk

  An improperly inflated air bag increases the risk of injury during a crash.

  Remedy

  Toyota will notify their owners. Pontiac Vibe owners will be notified by GM. Dealers will replace the front passenger air bag assembly or sub-assembly, free of charge. Toyota owners may contact Toyota customer service at 1-888-270-9371. Toyota's numbers for this recall are K1Q and K0Q. Pontiac owners may contact GM customer service at 1-800-762-2737. GM's number for this recall is N192273760.

  Full recall details →

• Air bags › Frontal › Passenger side › Inflator module

  Mar 3, 2016NHTSA 16V127000147,242 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2010 Lexus SC vehicles manufactured August 3, 2007, to July 30, 2010, 2008 Toyota Corolla vehicles manufactured May 25, 2007, to December 21, 2007, 2008 Toyota Corolla Matrix vehicles manufactured June 1, 2007, to December 18, 2007, and 2008 Pontiac Vibe vehicles…

  Risk and remedy

  Risk

  In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.

  Remedy

  The recall began on March 25, 2016 for Toyota and Lexus vehicle owners. The recall began on June 23, 2016 for GM owners. The respective dealers will either replace the front passenger air bag inflator or the entire front passenger air bag assembly depending on the model. Owners may contact Toyota customer service at 1-800-331-4331, or Pontiac customer service at 1-800-762-2737. This recall expands recall 15V-285.

  Full recall details →

• Air bags › Frontal › Passenger side › Inflator module

  Mar 2, 2016NHTSA 16V12800071,163 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2008-2010 Lexus SC vehicles manufactured August 3, 2007, to July 30, 2010, 2008 Toyota Corolla vehicles manufactured June 1, 2007, to December 21, 2007, 2008 Toyota Corolla Matrix vehicles manufactured June 1, 2007, to December 18, 2007, and 2008 Pontiac Vibe vehicles…

  Risk and remedy

  Risk

  In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.

  Remedy

  The recall began on March 25, 2016 for Toyota and Lexus vehicle owners. The recall began on June 8, 2016 for GM owners. The respective dealers will either replace the front passenger air bag inflator or the entire front passenger air bag assembly depending on the model. Owners may contact Toyota customer service at 1-800-331-4331, or Pontiac customer service at 1-800-762-2737. This recall expands recall 15V-286.

  Full recall details →

• Engine and engine cooling

  Aug 26, 2010NHTSA 10V3840001,128,659 vehicles

  Toyota IS recalling certain model year 2005-2008 corolla and corolla matrix vehicles. the engine control module (ecm) for the subject models equipped with the 1zz-fe engine and two-wheel drive may have been improperly manufactured. there IS a possibility that a crack may develop at certain solder points or on varistors on the circuit board.

  Risk and remedy

  Risk

  There are a variety of warnings and consequences associated with the defect. the engine warning lamp could be illuminated, harsh shifting could result, the engine may not start, or the engine could shut off while the vehicle IS being driven. an engine shutoff while the vehicle IS being driven increases the risk of a crash.

  Remedy

  Dealers will inspect the production number of the ecm and replace the ecm if necessary. this service will be performed free of charge. toyota will mail an interim owner notification the middle of september 2010 to advise owners of this defect and recall. this interim notification will inform owners that they will receive a future notification when parts become available to have the free remedy performed on their vehicle. The safety recall began on november 29, 2010. owners may contact toyota at 1-800-331-4331.

  Full recall details →

• Equipment › Other › Labels

  Feb 3, 2010NHTSA 10V036000153,418 vehicles

  Southeast toyota IS recalling certain model year 2005-2011 passenger vehicles for failing to comply with the requirements of federal motor vehicle safety standard no. 110, "tire selection and rims." these vehicles were sold without the requisite load carrying capacity modification labels.

  Risk and remedy

  Risk

  A driver may overload a vehicle which may increase the risk of a crash.

  Remedy

  Dealers will mail to consumers the corrected label or the customer will have the option for dealers to install the label free of charge. the safety recall began on may 27, 2010. owners may contact southeast toyota at 1-800-301-6859.

  Full recall details →

Owner complaints

What owners report most

1. Air bags138
2. Vehicle speed control54
3. Engine and engine cooling33
4. Electrical system22
5. Engine21
6. Service brakes, hydraulic17
7. Power train13
8. Steering12
9. Suspension11
10. Service brakes7

Latest complaints

• Sep 10, 2026CA
  Electrical system
  The engine will lose power and shut off while driving. It will proceed to not start and strand the driver. Other models in the genera of my car had this issue with the engine control module, so Im not sure why my VIN does not have a recall. My mechanic isolated the problem to either a fuse or the…

  The engine will lose power and shut off while driving. It will proceed to not start and strand the driver. Other models in the genera of my car had this issue with the engine control module, so Im not sure why my VIN does not have a recall. My mechanic isolated the problem to either a fuse or the ECM. I took the vehicle for a test drive and it failed again. By shutting off when driving out of nowhere this is a huge safety issue and could cause an accident. The ECM is a component that should never fail on a vehicle. Improper soldering caused this issue.

• Nov 10, 2024CA
  Air bags

  The airbag indicator red light has turned on without any collision or accident.

• Oct 15, 2024CA135,000 miCrash1 injury
  Air bags
  The contact owns a 2008 Toyota Corolla. The contact stated while the driver was idling in an intersection and making a left turn, another vehicle crashed into the front passenger side of the vehicle causing it to turn 180 degrees during the impact. The air bags did not deploy. The bumper detached…

  The contact owns a 2008 Toyota Corolla. The contact stated while the driver was idling in an intersection and making a left turn, another vehicle crashed into the front passenger side of the vehicle causing it to turn 180 degrees during the impact. The air bags did not deploy. The bumper detached during the crash. The vehicle was towed to the residence. A dealer was not contacted. The vehicle was not diagnosed or repaired. The contact stated that the driver sustained a fractured wrist and whiplash that required medical attention via the hospital. A police report was filed. The manufacturer was not notified of the failure. The approximate failure mileage was 135,000.

• Mar 15, 2024TX130,000 mi
  Air bags

  The contact owns a 2008 Toyota Corolla. The contacted stated that the air bag warning light was illuminated. The vehicle was not taken to be diagnosed or repaired. The dealer and the manufacturer were not notified of the failure. The failure mileage was approximately 130,000.

• Sep 20, 2023DE
  Fuel/propulsion system
  The plastic fuel tank has a heat shield below it that keeps the fuel tank from getting too hot, and from debris hitting it. There is a strap that goes around the fuel tank. The heat shield has this plastic piece that holds on to the strap. On my car, this plastic piece snapped off and the heat…

  The plastic fuel tank has a heat shield below it that keeps the fuel tank from getting too hot, and from debris hitting it. There is a strap that goes around the fuel tank. The heat shield has this plastic piece that holds on to the strap. On my car, this plastic piece snapped off and the heat shield was rattling loose against the exhaust pipe and exposing the fuel tank. I took my car to a Toyota dealer (Glen Mills, PA) and was told the only way to fix that plastic piece is to replace the whole heat shield and fuel tank strap. Even though this was due to their defective piece. I was told it would be $950 for this repair. I was forced to deny the repair due to the obscene price tag and took it to a dealer for a temporary fix until Toyota can be reasonable with their price. Upon further research, this plastic piece is known to break off on this type of car frequently. After watching many videos and going through many forums of people having the same issue, it seems Toyota is known for charging an outrageous price for this. To me, it appears they know this piece is defective and will be recalled at some point, and are trying to make money off of unsuspecting people. I would appreciate this being investigated further.

• Sep 13, 2023MD168,841 miCrash1 injury
  Air bags
  The contact owns a 2008 Toyota Corolla. The contact stated that while driving approximately 10 MPH a second vehicle crashed into the front driver's side of the vehicle. During the crash, the front driver's side air bag deployed and the contact sustained multiple fractured ribs and a left ankle…

  The contact owns a 2008 Toyota Corolla. The contact stated that while driving approximately 10 MPH a second vehicle crashed into the front driver's side of the vehicle. During the crash, the front driver's side air bag deployed and the contact sustained multiple fractured ribs and a left ankle injury which required medical treatment. The contact indicated that upon the vehicle's impact, the air bag did not immediately deploy and was delayed contributing to the rib injuries sustained. A police report was taken at the scene. The vehicle was destroyed and towed away. The cause of the failure was not determined. The manufacturer was notified of the failure. The local dealer was not notified. The failure mileage was 168,841.

• Jun 14, 2023NC
  Structure › Body

  I am the original owner of my car since the end of 2007. For some strange reason, my car just suddenly started to show large signs of rust on the roof. This is apparently a very common issue with the similar timeframe of model years. This is a manufacturing defect from the beginning as Toyota did not properly paint the car properly.

• Sep 4, 2022MI
  Unknown or other
  The ODO meter of my Corolla 2008 model has not been functioning since around November 2021 when it stopped at 299,999 mile. Recently in August 2022, I asked a Toyota dealership, named Fox Toyota located in Rochester Hills, MI, to fix the issue, but they told me they couldn't do it and I needed to…

  The ODO meter of my Corolla 2008 model has not been functioning since around November 2021 when it stopped at 299,999 mile. Recently in August 2022, I asked a Toyota dealership, named Fox Toyota located in Rochester Hills, MI, to fix the issue, but they told me they couldn't do it and I needed to look for other repair shop. Then I contacted Toyota Brand Engagement Center and requested them to fix because it appeared to be a Toyota manufacturing or design issue. They also refused their responsibility to do the repair. I attach the photos of ODO meter and vehicle. Please have Toyota take corrective actions on this issue. Thank you for your support in advance.

• Sep 9, 2021NM
  Electrical system · Engine

  Engine light stays on

• Jul 28, 2021CA215,000 mi
  Air bags

  The contact owns a 2008 Toyota Corolla. The contact stated that while driving at an undisclosed speed, the air bag warning light illuminated. The vehicle was taken to the local dealer. The vehicle was not diagnosed nor repaired. The contact declined the diagnostic fees. The manufacturer was notified of the failure. The failure mileage was approximately 215,000.

• May 5, 2021OH
  Air bags

  Airbag light comes on and off possibility of 600.00 fee

• Nov 20, 2020GACrash2 injuries
  Air bags · Seat belts

  Seatbelt didn't tighten up initially during a wreck causing more extensive injury. Then tightened up snatching passenger into seat from midair causing additional damage. Vehicle was going straight and was hit by a car who ran a left turn arrow on a city street. Wreck was under 50mph but passenger had extensive damage due to seatbelt malfunction. .

• Jun 4, 2020SC46,183 mi
  Unknown or other · Wheels
  Multiple times my car has slid on the pavement upon an abrupt stop. Deer in my travel routes are abundant. But on june 2, 2020 I heard a noise as I was driving. It appeared to be a suspension problem. I pulled over and inspected the car. The tire having over half it's tread threw a belt or had a…

  Multiple times my car has slid on the pavement upon an abrupt stop. Deer in my travel routes are abundant. But on june 2, 2020 I heard a noise as I was driving. It appeared to be a suspension problem. I pulled over and inspected the car. The tire having over half it's tread threw a belt or had a huge bulge in the tire. It went from a noise to a load grumbling sound and a lot of vibration very quickly. The sliding was ongoing and I assumed because the car was small and light but never had this sliding effect from multiple other small cares I've owned. Then the tire bulge. I researched the tire and it appears cooper tire has major issues with their tires but this tire size I did not see as a recall. (Mst p185/65r15 mc strategy bw 88T(N)) if I were on the interstate I could have lost control or flipped the car at a fast speed. Speed limit was 45mph where the tire separation happened. I'm now scared to death to even think of using a cooper tire. I can only imagine that as a novice driver this would cause multiple accidents. Fortunately I have driven professionally for multiple years and know to prepare for the extra 20 feet or more skid that IS not preventable with these tires when stopping abruptly. the tire were professionally installed july 2, 2012 with 23126 miles on the odometer. Now miles are 46184. I can provide picture and tires purchase receipt if needed. *tr

• Feb 6, 2020NY
  Air bags

  2008 toyota corolla. Consumer writes in regards to passenger airbag inflator safety recall. *Ld the consumer stated the dealer was attempting to charge for parts and labor on a recall repair. The vehicle was not repaired. *Js

• Nov 16, 2019VI
  Air bags

  There has been a recall on my vehicle and the recall has been unresolved thus far.

• Aug 19, 2019FL168,000 miCrash1 injury1 death
  Tires · Wheels

  Purchase a set of pirelli P4 tires dot XL 886A 3017 195/65r15 six months ago and kept going back to fix the tire. It kept loosing air and going flat. So after the six months past I had a blow out of the same tire that was going flat. And it almost kill me.

• Aug 10, 2019RI
  Air bags

  Air bag was replaced and light won't go off, causing inspection failure

• Oct 15, 2018DC
  Air bags
  TL* takata recall. The contact owns a 2008 toyota corolla. The contact received notification of nhtsa campaign numbers: 15v285000 (air bags) and 16v127000 (air bags). The part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the…

  TL* takata recall. The contact owns a 2008 toyota corolla. The contact received notification of nhtsa campaign numbers: 15v285000 (air bags) and 16v127000 (air bags). The part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. North bakersfield toyota scion (19651 industry parkway drive, bakersfield, california, (661) 615-1100) was made aware of the recall in september of 2017 and stated that parts were unavailable. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.

• Sep 11, 2018TX123,000 mi
  Power train
  When the car IS first started in IS reved up at 2000rpm. When driving 40mph & up or from third to fourth gear the rpms reve up to 3000rpm before shifting. Car also feels like hard shifting from first to second, lags when taking a turn and pressing gas at same time. Check engine light has now came…

  When the car IS first started in IS reved up at 2000rpm. When driving 40mph & up or from third to fourth gear the rpms reve up to 3000rpm before shifting. Car also feels like hard shifting from first to second, lags when taking a turn and pressing gas at same time. Check engine light has now came on p0741. Feels like pushing the max when trying to get fast speeds. Also feels like when slowing down that the transmission IS still in high gear and rmps are high. When stopped and foot on the brake the transmission still feels like it's trying to go forward. As driving on highway at 70 mph the transmission surges loses power at high speeds. I have been told the the torque converter solenoid IS not operating correctly on the transmission which IS causing these issues. This IS also the same issue we have with our 2005 toyota corolla, same code same problems. This IS a defective that seems to be the issue in corolla automatic transmission.

• Aug 22, 2018WA141,229 mi
  Air bags

  Srs light IS on not flashing. Continuously illuminated. Car was parked not moving I washed it and filled washer fluid reservoir fluid spilled so I rinsed it off when I was done I moved my car and srs light was on. I believe the senor shorted out when it got wet.

• Apr 2, 2018CACrash
  Vehicle speed control

  2008 toyota corolla. consumer writes in regards to vehicle sudden unintended acceleration. *smd the consumer stated the vehicle side swiped another vehicle. The consumer requested the to be reimbursed. *Js

• Feb 22, 2018TX260,000 miCrash
  Air bags

  My car was involved in an accident that was bad enough that the airbags should have activated, but did not. This was after I had the recall on the airbags repaired at the dealer in late 2017. Who can I address this problem with?

• Dec 12, 2017UT
  Air bags
  I had my car checked because a light came on on my dash on 12/6/17 so I had it checked and it ended up being my tire pressure was low, but the monitor they hook up indicated that my passenger airbag was affected, so I took it into toyota and they looked at me like I was dumb and just told me that…

  I had my car checked because a light came on on my dash on 12/6/17 so I had it checked and it ended up being my tire pressure was low, but the monitor they hook up indicated that my passenger airbag was affected, so I took it into toyota and they looked at me like I was dumb and just told me that they put air in my tires and everything was fine. so on 12/12/17 my maintenance required light came on and I had o'reilys check with there monitor and again it red flagged the passenger airbag, I knew it was time for an oil change so I figured that's why my maintenance required light was on but what concerns me IS the airbag. according to my notes, I had my airbags supposedly replace in july of 2016 and I am not sure if a light would come on indicating something was wrong with the airbags but I need to find out if after a 1 1/2 years why I would have a problem with my airbag???? Could this be related to the recall and how do I find out (other than going in to toyota) that they actually replaced the recalled airbag???) they tell me they did but doesn't my vin number have to be kept track of somewhere besides the specific dealer that I went to??? They treated me like crap and told me it was an $89 diagnostic fee and if it was an airbag would cost between $500-$700 dollars. I need to know more information on the previous airbag recall as I am beginning to wonder if it was never fixed because I have never had to have my car checked for lights coming on so I feel that I have been driving for 1 1/2 years with faulty airbags.

• Dec 1, 2017IA198,000 miCrash2 injuries
  Air bags

  October 9, 2017 I was rear-ended, hit at 35 mph. This hit I was sitting. I was side swiped at 40- 45 mph, moving at this time. I was again rear-ended at 50- 55 mph, stopped. And then I was backed into, in the front end of my car at 20-25 mph. How come no airbags go off?

• Nov 24, 2017CA98,000 mi
  Air bags

  I found airbag recall number 16v340

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Desiccated Air Bag Inflator Rupture

  EA21002Opened Sep 17, 2021Open
  From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…

  From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

• Low-speed surging

  DP14003Opened Sep 19, 2014Closed Apr 29, 2015
  The Agency received a petition on September 11, 2014 requesting an investigation into, low-speed surging in the 2006-2010 Toyota Corolla [vehicles] with ETCS-i, in which the brakes fail to stop the vehicle in time to prevent a crash.NHTSA conducted a technical review of the material cited and provided by the…

  The Agency received a petition on September 11, 2014 requesting an investigation into, low-speed surging in the 2006-2010 Toyota Corolla [vehicles] with ETCS-i, in which the brakes fail to stop the vehicle in time to prevent a crash.NHTSA conducted a technical review of the material cited and provided by the petitioner, material Toyota submitted in response to a NHTSA formal request, interviews with complainants and manufacturer representatives, as well as the results of testing of the complaint vehicle.Taking into account the allocation of agency resources, agency priorities, and the likelihood that an additional investigation would result in a finding that a defect related to motor vehicle safety exists, NHTSA has concluded that further investigation of the issues raised by the petition is not warranted.The agency accordingly has denied the petition.The official petition denial, as published in the Federal Register, is available in the document file for this defect petition, as well as copies of reference material related to the denial.Regarding the VOQs associated with the closing of this investigation, the scope as defined by the petitioner is MY 2006 through 2010 Toyota Corollas.Of the 163 VOQs submitted by the petitioner, 149 are within that specific population (11 of the 163 were outside the model and model year scope of investigation as defined by the petitioner and 3 VOQs were submitted by owners from foreign countries) and 6 of the 163 are duplicate submissions.Therefore, there are 143 unique vehicles vins are within the specific population.Of the 143 only 105 fit the alleged defect category as defined by the petitioner.The single complaint and crash noted in the Failure Report above is the petitioner's VOQ.The 143 VOQs are: 10165337, 10166526, 10209540, 10216514, 10256808 (duplicate with 10266580 and 10335955), 10272505, 10293497, 10293688, 10294727, 10297407, 10298012, 10302217, 10302877, 10303106, 10303469, 10303730, 10304192, 10305748, 10305845, 10306012, 10306480, 10307953, 10310973, 10311137, 10311176, 10311185, 10311756, 10312246, 10312272 (duplicate with 10343088), 10312771, 10313972, 10314880, 10315240, 10315442, 10315836, 10315927, 10316192, 10316627, 10316643, 10316800, 10316952, 10317128, 10317598, 10317725, 10317804, 10317894, 10317972, 10317978, 10318562, 10319589, 10320693, 10320720, 10322163, 10322213, 10322333, 10322415, 10324355, 10325755, 10326481, 10327623, 10328492, 10328519, 10329537, 10330026 (duplicate with 10356866), 10330952, 10332679, 10334005 (duplicate with 10340570 and 10547602), 10334028, 10334628, 10334936, 10336649, 10339772, 10339969, 10341515, 10342670, 10342932, 10343174, 10344874, 10345714, 10348120, 10350342, 10351112, 10352668, 10352691, 10353587, 10358767, 10359645, 10360875, 10360905, 10361254, 10363529, 10363685, 10363866, 10364127, 10366100, 10366413, 10369073, 10369494, 10371991, 10376535, 10376721, 10377193, 10379320, 10380210, 10381365, 10381849, 10382018, 10392618, 10396747, 10402827, 10412382, 10433860, 10437011, 10437801, 10450183, 10461118, 10479582, 10482133, 10489344, 10494568, 10496026, 10499932, 10520195, 10521013, 10523677, 10534094, 10537426, 10543949, 10549101, 10551478, 10552563, 10558153, 10562577, 10564980, 10566370, 10572873, 10578871, 10579722, 10587140, 10597296, 10621449, and 10637908 (which is the petitioner's VOQ and not one of the 163 submitted with the petition).The three VOQs that were submitted from foreign countries: 10303105, 10303749, and 10308974. The eleven VOQs that are out of the specified population by model or model year: 10447756, 10453401, 10490200, 10507434, 10521377, 10563214, 10563585, 10575230, 10583796, 10584534,

• Frontal Air Bag Non-deployment

  DP11001Opened Apr 7, 2011Closed Aug 19, 2011
  The Office of Defects Investigation (ODI) received a defect petition requesting that it open an investigation of model year (MY) 2008 Toyota Corolla vehicles for the failure of the frontal air bags to deploy during an alleged serious crash. The petitioner alleges that the frontal air bags in their MY 2008 Corolla…

  The Office of Defects Investigation (ODI) received a defect petition requesting that it open an investigation of model year (MY) 2008 Toyota Corolla vehicles for the failure of the frontal air bags to deploy during an alleged serious crash. The petitioner alleges that the frontal air bags in their MY 2008 Corolla failed to deploy during a 55-mph frontal impact with a large animal (a deer).The petitioner also filed a complaint with the agency (see ODI 10327470 for further details of the incident and the petition submitted to the agency).ODI has reviewed the petition, assessed consumer complaints on the MY 2008 Toyota Corolla and similar vehicles, analyzed statistics derived from NHTSA's Fatality Analysis Reporting System (FARS) and its National Automotive Sampling System (NASS), and evaluated crash tests of the subject vehicles.Based on its review, ODI does not believe that a safety-related defect trend currently exists for air bag non-deployment in the subject vehicles.Therefore, in view of the need to allocate and prioritize NHTSA's limited resources to accomplish the agency's safety mission, the petition is denied.However, the agency will continue to monitor this event and will take further action if warranted by changing future circumstances.For more information, see the Federal Register notice in the DP11-001 file (www-odi.nhtsa.dot.gov/defects).

• Engine Stall

  EA10006Opened Aug 18, 2010Closed Sep 16, 2010Recall 10V387000
  On August 26, 2010, Toyota submitted a Defect Information Report to the National Highway Traffic Safety Administration (NHTSA) regarding problems with Engine Control Modules that could result in engine stall while driving in certain model year (MY) 2005 through 2008 Toyota Corolla, Corolla Matrix and Pontiac Vibe…

  On August 26, 2010, Toyota submitted a Defect Information Report to the National Highway Traffic Safety Administration (NHTSA) regarding problems with Engine Control Modules that could result in engine stall while driving in certain model year (MY) 2005 through 2008 Toyota Corolla, Corolla Matrix and Pontiac Vibe vehicles equipped with the 1ZZ-FE engine and two-wheel drive and manufactured between April 19, 2004 and January 2, 2008.Toyota's report indicated that cracks may develop at certain solder point or on varistors on the ECMs.According to Toyota, such cracks generally resulted in engine warning lamp illumination, harsh shifting or engine no-start.In some cases, if the cracking occurs on particular solder points or varistors, the engine could stop while the vehicle is being driven.Toyota will notify owners of subject vehicles that they should return their vehicles to a Toyota or Pontiac dealer.Dealers will be instructed to inspect the production number of the ECM for each vehicle and replace the ECM if necessary.On November 30, 2009, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE09-054) to investigate alleged engine stall while driving in model year (MY) 2006 Toyota Corolla and Corolla Matrix vehicles.In its response to ODI's information request, submitted on March 2, 2010, Toyota indicated that it had identified two possible conditions with ECMs used in MY 2005 through 2007 Toyota Corolla and Matrix vehicles:1) cracks forming between the IC and the board caused by an improperly cured conformal coating applied to the circuit boards after the soldering process is completed; and 2) cracks occurring in a variable resistor (varistor) due to overheating.During the manufacturing process a glass coating is created on the surface of the varistor.Between March and August 2010, Toyota began collecting ECMs from the field to further investigate failure modes that may result in engine stall.Toyota also conducted durability testing on ECMs collected from in-use vehicles to assess whether the problems may be a continuing trend. In addition, they conducted durability testing in order to assess whether this problem was a continuing trend.Toyota found that 4 of 32 collected ECMs malfunctioned after thermal shock testing.Toyota also confirmed that cracking could develop at solder points on the ECM circuit board that could lead to engine stall while driving and that this trend was likely to continue.The manufacturer failure data in this resume is limited to MY 2005 through 2007 Toyota Corolla and Corolla Matrix vehicles.Based on Toyota's recall, this Engineering analysis has been closed.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005119This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005061This Service Bulletin provides updated non-electric water pump leak inspection and diagnostic tips for some 2008 2025 model year Toyota vehicles.
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10251076FAQ: Customer Frequently Asked Questions
• 10251075DP: The subject vehicles are equipped with a front passenger airbag. A part inside the airbag could explode, shooting sharp metal fragments at vehicle occupants. This could cause serious INJURY or DEATH. ? Added Dealer Procedures for Do No Drive Advisory ? Updated BEC contact information ? Revised Warranty Claim Filing Instructions to streamline customer convenience items during repair ? Added creatives materials from Vendor Partners i.e, sample letters and sample tags ? Removed several obsolete sections
• 10251074FAQ: Customer Frequently Asked Questions
• 10251073DP: The subject vehicles are equipped with a front passenger airbag. A part inside the airbag could explode, shooting sharp metal fragments at vehicle occupants. This could cause serious INJURY or DEATH. ? Added Dealer Procedures for Do No Drive Advisory ? Updated BEC contact information ? Revised Warranty Claim Filing Instructions to streamline customer convenience items during repair ? Added creative materials from Vendor Partners i.e, sample letters and sample tags ? Removed several obsolete sections
• 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10227898TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process.
• 10220174TSB: Some 2005 ? 2022 model year Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty smell is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this service bulletin is to provide general guidelines and procedures for odor remediation. This service bulletin provides a guide on how to prepare the interior of the vehicle prior to an odor remediation being performed, as well as contact information for an approved vendor who will arrange the remediation, and instructions on how to prepare the interior of the vehicle for reassembly once the remediation has been completed. Refer to all model and model year specific Repair Manuals and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This service bulletin is to provide a general overview and direction for the odor remediation process
• 10217806CSP: Takata CSP Coverage Job Aid - published 7.28.2022
• 10217804CSP: On July 30, 2018, a settlement of claims for Economic Loss related to Takata airbag inflators was approved for full implementation. The settlement includes Toyota?s agreement to provide a Customer Support Program (?CSP?) for 2002-2019 model year (MY) vehicles originally equipped with certain Takata airbag inflators or repaired under a recall with Takata airbag inflators to provide coverage for repairs of the airbag inflator contained in the airbag module. This CSP letter is to help clarify how to administer this coverage in accordance with the settlement. This is NOT a recall or a campaign, but is provided to reassure owners that Toyota stands behind the reliability of our vehicles.
• 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
• 10210375TSB: This Service Bulletin includes procedures to replace damaged or loose front carpet floor retainer(s) without replacing the carpet assembly. Follow the Repair Procedure in this bulletin to replace the loose or damaged carpet floor retainer(s).

Every Toyota Corolla model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.