2007 BMW 525I
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2007 BMW 525I. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2007 BMW 525I. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2008-2011 128i and 2007-2011 328i, 328xi, 328i xDrive, 525i, 525xi, 528i, 528xi, 530i, 530xi, X3 3.0si, X3 xDrive30i, X5 xDrive30i, Z4 3.0i, Z4 3.0si and Z4 sDrive30i vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Risk and remedy
Risk
An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.
Remedy
BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. Interim letters were mailed on November 27, 2017. Owners will receive a second notification by the end of October 2018. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America LLC (BMW) is recalling certain model year 2006 325i, 325xi, 330i, 330xi sedans and 325xi sports wagons, model year 2007 328i, 328xi, 335i, 335xi sedans and 328i and 328xi sports wagons, model year 2006-2007 525i, 525xi, 530i, 530xi, 550i sedans and 530xi sports wagons, model year 2006 760i sedans, model year 2006-2007 750i, 750Li, and…
Risk and remedy
Risk
Should the system fail, in the event of a crash, the front passenger air bag would be deactivated, increasing the risk of personal injury.
Remedy
BMW will notify owners with an interim notification letter in January 2014 since parts are not currently available. When parts are available, BMW sent a second letter in August and dealers will repair the occupant detection mat to eliminate the possibility that it may crack, free of charge. Additionally, owners of model year 2006-2007 3 Series with standard seats, 5 Series with comfort seats, and Z4 models, will receive an extended warranty on their front passenger seat occupant detection mat. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Owner complaints
72 complaints3 involved a crash2 involved a fire5 injuries
What owners report most
Latest complaints
- Unknown or other
Unknown, the car shut down on me two time in a month.
- Air bags
The contact owns a 2007 BMW 535I. The contact stated that while operating the vehicle, the passenger’s side air bag warning light remain illuminated, indicating a possible failure to the air bag system. The cause of the failure was not yet determined. The local dealer was notified of the failure. The manufacturer was not yet notified. The failure mileage was 100,000.
- Air bags
The contact owns a 2007 BMW 525I. The contact stated that the air bag warning light was illuminated. The dealer was notified of the failure. The vehicle was not diagnosed nor repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 102,000.
- Engine and engine cooling
The contact owns a 2007 BMW 525I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling). The vehicle was taken to the dealer for the recall repair however, upon retrieving the vehicle, the contact noticed that the vehicle was shaking while driving at…
The contact owns a 2007 BMW 525I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling). The vehicle was taken to the dealer for the recall repair however, upon retrieving the vehicle, the contact noticed that the vehicle was shaking while driving at various speeds. The contact stated that the failure had worsened while at a complete stop. Over time, the service engine warning light illuminated. The dealer was notified of the failure and the contact was placed on an indefinite hold until the call disconnected. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was 284,191.
- Engine
The contact owns a 2007 BMW 525i. The contact stated that while driving at approximately 75-85 MPH, she smelled smoke coming from the hood of the vehicle. The contact was unsure if any warning lights illuminated. The vehicle was taken to an independent mechanic where he referenced NHTSA Campaign…
The contact owns a 2007 BMW 525i. The contact stated that while driving at approximately 75-85 MPH, she smelled smoke coming from the hood of the vehicle. The contact was unsure if any warning lights illuminated. The vehicle was taken to an independent mechanic where he referenced NHTSA Campaign Number: 22V119000 (Engine And Engine Cooling) , but the vehicle was not diagnosed for the failure. The dealer was not notified of the failure. The manufacturer was not notified of the failure. The approximate failure mileage was 189,000.
- Engine and engine cooling
The contact owns a 2007 BMW 525i. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The…
The contact owns a 2007 BMW 525i. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Engine and engine cooling
The contact owns a 2007 BMW 525i. The vehicle had previously been serviced by the dealer under an unknown NHTSA campaign; however, the failure recurred with a burning odor detected. Additionally, several unknown warning lights were illuminated. The contact then received notification of NHTSA…
The contact owns a 2007 BMW 525i. The vehicle had previously been serviced by the dealer under an unknown NHTSA campaign; however, the failure recurred with a burning odor detected. Additionally, several unknown warning lights were illuminated. The contact then received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The dealer was made aware of the failure but confirmed that parts were not yet available. The manufacturer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The failure mileage was 34,406. VIN tool confirms parts not available.
- Electrical system · Exterior lighting · Visibility/wiper
I purchased said automobile from my neighbor for my son to drive. I figured it was a good car to buy because it was serviced by Hendrick BMW (Charlotte, NC) only and regularly. BMW's also have a reputation for being safe as well as reputable so this also weighed into my decision. Fast forward 18…
I purchased said automobile from my neighbor for my son to drive. I figured it was a good car to buy because it was serviced by Hendrick BMW (Charlotte, NC) only and regularly. BMW's also have a reputation for being safe as well as reputable so this also weighed into my decision. Fast forward 18 months. The passenger rear brake bulb went out. We replaced the bulb, it worked for a short time, then went out. We replaced the bulb again. This time it didnt work. About a week later the front passenger side head light went out, then the other side. We took it to Hendrick BMW for repair. Hendrick has told us the car wiring basically needs to be replaced due to the protective coat wearing off and corroding the bare wire underneath. The headlights/ brake light will also need to be replaced due to the corrosion blowing out the bulb. For the front headlight the whole assembly needs to be replaced at a tremendous cost. I performed a google search on this and found many, many instances of the same issue. Ive seen many of these cars while casually driving around town. It would seem to be a MAJOR issue if an active drivers head and tail lights suddenly stopped working on a busy road. Also due to the cost most people probably wouldnt fix the issue on their own and drive the car anyway causing an ever bigger safety issue. I have never had this issue with any other vehicle brand ive owned. Ive looked into this issue with other brands and most tell me they use wiring which will not do this. I am not sure why BMW would not do the same. The car is also up for inspection. The car will not pass inspection unless I pony up over $6k ($2500 NADA value) to fix. My taxes are also due. In NC you cant pay the tax unless the car passes inspection. This is costing me daily penalties in addition to the major safety issue. I believe the NHTSA has a duty to look into this major manufacturing defect and have BMW provide remedy to those other unfortunate folks who are experiencing the same issue.
- Power train
Transmission goes in to safe mode suddenly on the freeway at high speed randomly and slows down making it dangerous situation. Code p17ec .
- Electrical system · Exterior lighting
Headlight wiring insulation rot lead to failed high and low beams on driver side and intermittent failures of both beams on passenger side. See photo for exampole of disintegrated wiring on driver high beam wiring harness. only known option IS to buy a complete new headlight assembly ($1250+…
Headlight wiring insulation rot lead to failed high and low beams on driver side and intermittent failures of both beams on passenger side. See photo for exampole of disintegrated wiring on driver high beam wiring harness. only known option IS to buy a complete new headlight assembly ($1250+ per side) or attempt diy. this problem IS well-known and has long been reported by other BMW E60 (5 series 2004-2010) owners at bimmerfest.com and 5sriest.net. See these urls for more information: https://www.bimmerfest.com/forums/showthread.php?t=798640 https://www.bimmerfest.com/forums/showthread.php?t=883000 https://5series.net/forums/e60-e61-parts-accessories-mods-22/opening-up-e60-headlights-138473/
- Engine · Unknown or other
The nhtsa database IS showing a recall for my car has not been completed. However I am currently in south korea with my car and the dealership here IS telling me that the recall has been completed. this IS a conflict. I can not ship my car back to the us without this recall being cleared. can someone provide me documentation showing that the recall has been satisfied.
- Electrical system
2007 BMW 525I. Consumer writes in regard to reimbursement for the recalled positive battery cable connection. *As *js
- Engine
TL* the contact owns a 2007 BMW 525I. The contact received notification of nhtsa campaign number: 17v683000 (engine and engine cooling). The part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. An unknown BMW…
TL* the contact owns a 2007 BMW 525I. The contact received notification of nhtsa campaign number: 17v683000 (engine and engine cooling). The part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. An unknown BMW dealer in hemet, california was made aware of the recall and stated that the parts were unavailable. The manufacturer was made aware of the issue. The contact stated that the engine overheated on more than one occasion. The failure mileage was unknown. Vin tool confirms parts not available.
- Engine
TL* the contact owns a 2007 BMW 525I. Upon driving the vehicle for several minutes, an unknown odor was detected in the vehicle. There were no warning indicators illuminated. The vehicle was not taken to an independent mechanic or dealer for diagnostic testing. The contact received notification of…
TL* the contact owns a 2007 BMW 525I. Upon driving the vehicle for several minutes, an unknown odor was detected in the vehicle. There were no warning indicators illuminated. The vehicle was not taken to an independent mechanic or dealer for diagnostic testing. The contact received notification of nhtsa campaign number: 17v683000 (engine and engine cooling); however, the parts do to the repair were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The dealer (BMW of ocala 5145 sw college rd, ocala, fl 34474, (352) 861-0234) was contacted and confirmed that the parts were not available for the recall remedy. The manufacturer was not made aware of the issue. The failure mileage was 56,000. Vin tool confirms parts not available.
- Air bags · Seat belts
My warning light "fault in the passenger restraint system" illuminated when I turned the car on. has not come off.
- Engine
Overheated, I have spent over $3000 to repair the overheat problem, it keep coming back
- Service brakes
I was driving my 2007 BMW 525I on a city street and when I attempted to stop at a stop sign the brakes were non existent. the brake pedal lost all of its pressure and went all the way down without stopping the vehicle. I could not stop at the stop sign and the only way to stop was using the…
I was driving my 2007 BMW 525I on a city street and when I attempted to stop at a stop sign the brakes were non existent. the brake pedal lost all of its pressure and went all the way down without stopping the vehicle. I could not stop at the stop sign and the only way to stop was using the emergency brake which barely stopped the vehicle. the brakes would not work so I was unable to drive the vehicle. after further inspection under my hood, I found a broken brake vacuum hose which broke apart and this was the cause of the brake system failure. I was very lucky not to be injured.
- Steering
Lights of the steering wheel its been lock came out, the car was park and was ready to go to work, but when I turned on the light show up on the panel, and the steering wheel was not lock, I was able to turn it,, I turn it off and on again and the light still on
- Electrical system
My BMW drivers seat get so hot it feels like it's about to catch fire ( I don't have heated seats } sometimes in motion sometime after I shut ti off
- Steering
The car will not start, a steering lock malfunction and a engine malfunction message appear. Had BMW mechanics try to resolve problem. Changed steering lock mechanism, reprogram modules, change several sensors, place new battery and even replace the dme. The only thing that seems to partially allow the car to start IS to "reset the cas" with a computer.
- Steering
At 51000 miles a red light with a steering wheel and a padlock appeared on the dash. The car starts and steers ok with the red steering lock light on. There are no mechanical issues with the car but the light and a message stating go to a safe place before turning the car off. I brought it to the…
At 51000 miles a red light with a steering wheel and a padlock appeared on the dash. The car starts and steers ok with the red steering lock light on. There are no mechanical issues with the car but the light and a message stating go to a safe place before turning the car off. I brought it to the dealer and they tell me the whole steering column has to be replaced to get rid of the red light and the message on the navigation screen. this was after replacing the steering column switch cluster at a cost of $1033.there was an internal fault of the steering sensor causing the ABS light to show up on the dash. apparently BMW has built in defects that show up on the dash as a warning light . There are no mechanical problems related to the warning light but a very costly fix to have the warning light removed. the service advisor at the BMW dealership said he didn't quote me on the steering column replacement because it wasn't worth doing. so I am driving this BMW with a red dash light showing a steering wheel and a padlock with a message on the navigation screen telling me to drive to a safe place before turning the engine off because the engine may not start again. after going on line and doing some research the steering wheel/padlock light issue IS a common problem. BMW needs to issue a recall on both of these items and repair them free of charge when they occur. *tr
- Air bags
TL* the contact owns a 2007 BMW 525I. While the vehicle was parked, "passenger restraint system" was displayed across the message board. The failure recurred on numerous occasions. The vehicle was taken to a dealer where it was diagnosed that the passenger side mat sensor needed to be replaced. The…
TL* the contact owns a 2007 BMW 525I. While the vehicle was parked, "passenger restraint system" was displayed across the message board. The failure recurred on numerous occasions. The vehicle was taken to a dealer where it was diagnosed that the passenger side mat sensor needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The vin was excluded from nhtsa campaign number: 13v564000 (air bags). The failure mileage was 131,000.
- Air bags
TL* takata recall. The contact owns a 2010 (na) BMW 525I. The contact received notification of nhtsa campaign number: 15v318000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The…
TL* takata recall. The contact owns a 2010 (na) BMW 525I. The contact received notification of nhtsa campaign number: 15v318000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact stated that the air bag light illuminated when the vehicle was turned on, and sometimes remained illuminated. The vin and failure mileage were not provided. Parts distribution disconnect.
- Steering
My steering wheel IS locked and car cannot start.
- Electrical system · Exterior lighting
Went to replace my front headlamp bulbs after headlamp failure while operating my vehicle at night, on a winding road, in rural texas. Mechanic pulled the "sealed" housing, and discovered that the majority of the wires in the headlamp assembly had faulty insulation. the insulation had "flaked" off…
Went to replace my front headlamp bulbs after headlamp failure while operating my vehicle at night, on a winding road, in rural texas. Mechanic pulled the "sealed" housing, and discovered that the majority of the wires in the headlamp assembly had faulty insulation. the insulation had "flaked" off to the point that many of the wires were exposed, causing a short circuit, and failure of the headlamp. researched the issue on many forums, and it IS a common occurrrence. Replacement costs of each headlamp assembly IS approx $1500. the use of subpar insulation appears to be the cause of this safety issue.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249437The basic conditions for initializing the power windows are not met.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10247567Engine will crank but not start. There is no communication with the integrated fuel module (TFE) whendiagnosing with ISTA. The following two fault codes will be stored in the DME: 032B43 - Low fuel pressure system, electric fuel pump: pressure value too low CDA594 - Message (- 0x33E) missing, receiver DME, transmitter TFE
- 10245422Customers may state that the alarm system (DWA) is not active after locking their unoccupied vehicle. Depending on the vehicles equipment and settings, no acoustic or optical confirmation (folding the mirrors/blinking confirmation) is noticeable. Additionally, the red anti-theft alarm LED in the interior mirror does not briefly flash every 2 seconds, indicating the alarm is armed.
- 10194296Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
- 10182619Discharged Battery Energy Diagnosis Must Be Performed: The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle "discharged battery" complaints. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion, with all results taken into consideration. Without performing the energy diagnosis test plan, the root cause of the discharged battery cannot be identified. This increases the chances of a repeat repair.
- 10181214Power Reduction, FC2A82 Intake VANOS and/or FC2A87 Exhaust VANOS Camshaft Fault: The ?Service Engine Soon? (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If theignition is cycled, the engine then usually performs normally.
- 10175267Power Reduction FC2A82 Intake VANOS and/or FC2 A87 Exhaust VANOS Camshaft Fault: The "Service Engine Soon" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled the engine then usually performs normally.
- 10162428Various Electrical Problems Caused by Water Ingress. Water ingress into the luggage compartment may cause various electrical problems or faults associated with the MPM (Micro Power Module); PDC (Park Distance Control); M-ASK (Multi-Audio System Controller); CCC (Car Communication Computer); CID (Control Information Display); TCU (Telematics Control Unit); LOGIC-7 (Top Hi-Fi); RDC (Tire Pressure Monitor) or SDARS (Satellite Radio Receiver) control modules. In most cases, the water collects in the spare wheel recess. CAUSE: Insufficient sealing may allow water to enter the luggage compartment due to the vacuum generated while driving.
- 10162416"Power Reduction, FC 2A82 Intake VANOS and/or FC 2A87 Exhaust VANOS Camshaft Faults are Stored in DME. The ""Service Engine Soon"" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled, the engine then usually performs normally. The following faults are stored in the DME: * 2A82 VANOS intake - stiff; jammed mechanically * 2A87 VANOS exhaust - stiff; jammed mechanically * 130108 VANOS intake: control fault, position not reached * 130308 VANOS exhaust: control fault, position not reached For the N54 engine, the following secondary faults may also be stored: * 120408 Charge-air pressure control, cut-out: Boost pressure accumulation blocked * 3100 Boost-pressure control, deactivation - boost-pressure buildup prohibited CAUSE The VANOS faults can be caused by an insufficient oil pressure supply to the inlet VANOS adjustment unit. To effectively move the camshafts to the target positions in the specified time and under all engine conditions, sufficient oil pressure supply to the VANOS control pistons must always be available. If engine operation requires the VANOS system to quickly advance or retard the intake or exhaust camshaft, faults may be stored if the camshaft is ""late"", or does not reach the target position. In this situation, engine power may be reduced and a check control message is displayed. The consequential fault 3100 or 120408 can also be set in the DME fault memory as well."
- 10152289"?CLASS ACTION LAW SUIT SETTLEMENT: WATER INTRUSION AND ACCUMULATION IN THE TRUNK (E60)/REAR CABIN WELL AREA (E61). INFORMATION BMW of North America, LLC (?BMW NA?) is has entered into a court approved ?nationwide settlement? with this Class Action?s lawsuit plaintiffs. Class Allegations In their complaint, the plaintiffs allege that:Model Year 2004 to 2010 BMW 5 Series E60 (Sedans) and Model Year 2006 to 2010 E61 (Sport Wagons) vehicles (""Preliminary Class Vehicles"") have defectively designed sunroofs drains which, if they become clogged, causes water intrusion and accumulation in the trunk/rear cabin well area of these vehicles. As a result, over time, this can potentially damage the electrical components and wiring that is located in the lowest part of the well area. Final Settlement Class Vehicles US specification Model Year 2007 to 2010 BMW 5 Series E60 (Sedans) and E61 (Sport Wagons) vehicles (""Final Settlement Class Vehicles"") registered and operated in the US (including Puerto Rico). Cass Members US residents (including Puerto Rico) who purchased or leased a Class Vehicle. Settlement Terms for Final Settlement Class Vehicles For eligible vehicles, the free inspection is available one-time (repair/claim dates) beginning on 8/28/2017 but no later than the extended date of 11/21/2018, Class Members will be permitted to bring their Class Vehicle to an authorized BMW center to have the free one-time inspection and control module relocation procedure performed. SI B01 28 17 (DC 54 12 90 01 00) CLASS ACTION LAWSUIT SETTLEMENT: WATER INTRUSION AND ACCUMULATION IN THE TRUNK (E60)/REAR CABIN WELL (E61) AREA, MAY APPLY. FOR ELIGIBLE VEHICLES, AN INSPECTION AND APPLICABLE CORRESPONDING REPAIRS ARE AVAILABLE ONE-TIME (REPAIR/CLAIM DATES) BEGINNING ON 8/28/2017 BUT NO LATER THAN THE EXTENDED DATE OF 11/21/2018. CLASS ACTION LAWSUIT SETTLEMENT: WATER INTRUSION AND ACCUMULATION IN THE TRUNK (E60)/REAR CABIN WELL (E61) AREA, SERVICE INFORMATION BULLETIN SI
- 10151335Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware.
- 10151323ELV Does Not Release. The customer complains of a no-crank, no-start situation. The condition may be intermittent. The ELV (Electric Steering Lock) warning is shown in the Instrument Cluster.
- 10151300N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints This Service Information bulletin and attachment supersedes SI B11 06 16 dated April 2016.. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
- 10151247N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
- 10151119SI B84 03 14 February 2016 Communication Systems Technical Service This Service Information bulletin supersedes SI B84 03 14 dated October 2014. SUBJECT Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures CAUSE Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware CORRECTOPM None available at this time. We are currently working with the device manufacturer on a solution.
- 10151115SUBJECT Audio System Speaker Testing. For audio system speaker testing there is a NED (Non Electrical Diagnosis) Test Plan available. CAUSE We previously recommended use of the Audio Test CD (ATC) from BMW. This CD has been discontinued.
- 10151068This Service Information bulletin supersedes SI B07 03 14 dated October 2015. Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Fault codes stored in vehicles being serviced are not being diagnosed, leading to repeat repair visits (source- Analysis of FASTA data and repeat repair visit reports). INFORMATION Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) to find their root cause during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
- 10151023Whistling Noise Coming from the Center Vent - A/C is Off . A very high pitched whistling or beeping noise is heard coming from the center vents. The flow of refrigerant through the expansion valve at certain temperature differentials.
- 10150385"CCC - ""Please Insert Navigation DVD"" Appears on CID. The navigation map DVD cannot be read or detected. The message ""Please insert navigation DVD"" appears in the CID (Central Information Display). The navigation system is inoperative. This situation may also occur when upgrading to a new navigation map. The old map is recognized but the new one is not. CAUSE Faulty DVD drive; read error due to hardening of the anti-vibration gel on the read head"
- 10150330"Discharged Battery: Energy Diagnosis Must Be Performed. The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle ""discharged battery"" complaints. A discharged battery can have various causes, most of which do not concern the battery itself. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to www.batteryuniversity.com/parttwo-42B.htm For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion with all results taken into to consideration. The procedure as outlined below contains information that will guide the technician into properly repairing the vehicle and getting paid for a warranty claim. CAUSE Refer to the ""Procedure"" section of this Service Information for details."
- 10150130The vehicle position is missing or incorrect on the navigation map. The navigation system integrated in the Car Information Computer (CIC) is not calibrated correctly.
- 10150099N54 Engine: Fuel Pressure Control Test Plan Error. INFORMATION Not applicable.
- 10150095Intermittent Hydraulic Valve Adjuster (HVA) Noise. An occasional ticking or rattling noise from the camshaft hydraulic valve lifters (HVA) may occur during cold engine starts, due to frequent short-distance driving, or the noise may occur for an extended period of time even though the engine is at operating temperature. Improved parts were phased into production beginning on 10/1/2008 and fully implemented on November 31st 2008.
- 10150065"BMW NA has agreed to extend the emissions warranties of the turbocharger's wastegate to: ??8 years or 82,000 miles, whichever occurs first, as determined from the vehicle's original in-service date select the ""Vehicle Comment"" button to display the extended coverage information. The terms of the original New Vehicle/SAV Limited Warranty and applicable emissions warranty still apply. BMW NA will not provide warranty coverage to any Settlement Class Member's vehicle containing modifications or alterations to the turbocharger or its wastegates (software, hardware or otherwise), or evidencing other conditions not normally covered under the original New Vehicle/SAV Limited Warranty or applicable emissions warranty. Modifications excluded from warranty coverage include any aftermarket parts that affect the turbocharger system, or if there are other conditions that would normally exclude it from warranty coverage."
- 10149605Battery Replacements. A failed battery in the vehicle is being replaced with a battery of a different size and type, which can lead to additional labor to retrofit the differently sized battery. CAUSE In the past, the 110 AH Lead acid battery was not available. The 90/92 AH AGM battery was installed as an alternative replacement; this required retrofitting.
- 10149589"N54 Engine: Diagnosis of Cold Start Rough Running with Misfire Faults. The customer may complain that during the cold start in the morning, the engine runs very roughly and the Service Engine Soon lamp is illuminated. Various misfire fault codes (e.g., 29CC, 29D2, 29D1, 29D0, 29C0, 29CF) may be stored in the DME control module. The engine rough running complaint can be reproduced on a cold start in the workshop. During the course of diagnosis, the spark plugs, removed from the misfiring cylinders after the problem was reproduced, are found to be soaked (""wet"") with fuel, while the injector tips are covered with a layer of carbon deposit. Possible cause: high-pressure injector failure (leakage or incorrect spraying pattern) due to internal wear or unfavorable stock of tolerances IMPORTANT: For comprehensive N54 drivability diagnostics, always refer to the ""N54 Engine Diagnostic Fault Tree"" file (the current version ""02_14_13"" is found as a PDF attachment to SI B12 55 06)."
- 10149382iPhone: Connection Failures with iOS 7. There are various connectivity failures with the iPhone using iOS 7. Some examples are listed below: z Call disconnection z Contact List incomplete z General connection failures Apple software iOS 7 and its variants
- 10149279Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Analysis of FASTA data and repeat repair visit reports indicates that there are many fault codes that are stored in the above vehicles, but they are not diagnosed to identify their root cause. Fault codes that are not diagnosed to find their root cause can lead to a repeat repair visit to the workshop by the customer. Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
- 10148423Check Control Messages Related to Battery Charge During Cold Ambient Temperatures. On cold days with an outside ambient temperature of less than 15F, customers may notice a check control message related to the battery that is displayed on the instrument cluster and the control information display. Under these conditions, the vehicle starts. Various power management faults can be stored: z 213901 - Power management: Reduction or shutdown of individual electrical consumer z 8040BD - Reset or deactivation of Terminal 30F z 8040B9 - De-activation of terminal 30B: Top start capability limit reached z 8020E8 - Reset or deactivation of terminal 30F z 800E89 - FRM: start capability limit reached with lights active during stationary mode z 93076B - Deactivation of terminal 30B: upper start capability limit reached z 93076A - Deactivation of terminal 15: upper start capability limit reached, but deactivation preventer active z 93076C - Deactivation of terminal 30B: upper start capability limit reached, but deactivation preventer or legal loads active z 930769 - Deactivation of terminal 15: upper start capability limit reached Note: When the outside temperatures drop below 46F, the charging system is switch to full charge. CAUSE z The check control message (ID 229) is caused by a heavily discharged battery. z The check control message is triggered when the current state of charge (SoC) of the battery approaches the minimum SoC that is required to start the vehicle (start capability limit). z In low outside ambient temperatures, the start capability limit of the vehicle is higher. Therefore it takes more energy from the battery to start a cold engine. z Without the early warning of the check control message, the current state of charge would drop below the start capability limit and the vehicle would not start. z The vehicle's intelligent power management system actively takes measures to increase the charge of the battery, such as increasing idle speed and reducing or shutting
- 10148376Previously assigned radio channels to the satellite radio "Presets" list have been erased and radio channels selected from the list "All channels" menu cannot be stored in the "Presets" list. The problem occurred after the recently implemented Sirius/XM channel lineup change. The data handling between the satellite radio receiver (SDARS-Exbox) and the Car Communication Computer (CCC head unit) has been corrupted.
- 10148276Traffic Information Is Inoperative. The traffic information is intermittently or permanently inoperative. * Traffic flow is not displayed on the navigation map. * The traffic list is empty. 1. The Offboard Availability (backend) system is unavailable and is not sending traffic information. 2. The traffic information feature is not activated correctly.
- 10148273Check Control Messages Related to Battery Charge During Cold Ambient Temperatures. On cold days with an outside ambient temperature of less than 15F, customers may notice a check control message related to the battery that is displayed on the instrument cluster and the control information display. Under these conditions, the vehicle starts. Various power management faults can be stored: * 213901 - Power management: Reduction or shutdown of individual electrical consumer * 8040BD - Reset or deactivation of Terminal 30F * 8040B9 - De-activation of terminal 30B: Top start capability limit reached * 8020E8 - Reset or deactivation of terminal 30F * 800E89 - FRM: start capability limit reached with lights active during stationary mode * 93076B - Deactivation of terminal 30B: upper start capability limit reached * 93076A - Deactivation of terminal 15: upper start capability limit reached, but deactivation preventer active * 93076C - Deactivation of terminal 30B: upper start capability limit reached, but deactivation preventer or legal loads active * 930769 - Deactivation of terminal 15: upper start capability limit reached Note: When the outside temperatures drop below 46F, the charging system is switch to full charge. CAUSE * The check control message (ID 229) is caused by a heavily discharged battery. * The check control message is triggered when the current state of charge (SoC) of the battery approaches the minimum SoC that is required to start the vehicle (start capability limit). * In low outside ambient temperatures, the start capability limit of the vehicle is higher. Therefore it takes more energy from the battery to start a cold engine. * Without the early warning of the check control message, the current state of charge would drop below the start capability limit and the vehicle would not start. * The vehicle's intelligent power management system actively takes measures to increase the charge of the battery, such as increasing idle speed and reducing or shutting
- 10148194iPhone 6, 6 Plus, 5, 5S, 5C, 4S, 4, and 3GS with iOS 8.x Information. INFORMATION There is one major difference in functionality since iOS 8.0 was released. Scenario: z The customer leaves the vehicle and turns his or her phone off. z He or she turns the phone back on. z He or she enters the vehicle, but does not unlock the phone and start driving. Result: z The phone reconnects to the Bluetooth system (normal). z However, it does not transfer the contact list (not normal). z The contact list in the iDrive will be empty. z The call list in the Kombi will display only phone numbers, but no names. z The hands-free system works for accepting calls and conversing on calls started on the phone. Solution: z Prior to the customer entering the vehicle they must unlock the phone (passkey) With the release of Apple's new iPhone 6, 6 Plus and iOS 8.x software, there have been many questions regarding the new phone and software. The information in the attachment to this Service Information will help answer these questions. A printed copy can be given to the customer if needed. The attachment provides information on the differences between the new iPhone 6, 6 Plus and the previous versions, along with Apple software improvements in the following areas: 1. Visual comparison 2. Connectivity 3. Functionality Refer to the PDF file in the "Attachment" section of this bulletin for complete details. Information on the iPhone 6 is also available via the following: z www.bmwusa.com/bluetooth website NOTE: This SI will be updated as new information is received.
- 10148135ConnectedDrive/BMW Assist System Diagnosis Information. ConnectedDrive/BMW Assist features are partially or completely inoperative. This Service Information bulletin is being published because vehicles are down for an extended period of time when researching system failures with ConnectedDrive or BMW Assist. This Service Information bulletin will assist you both in identifying the issue and providing technical support. CAUSE Not enough information is available for BMW NA engineers to assist the technician in diagnosing the root cause.
- 10148120Check Control Messages Related to Battery Charge During Cold Ambient Temperatures. On cold days with an outside ambient temperature of less than 15F, customers may notice a check control message related to the battery that is displayed on the instrument cluster and the control information display. Under these conditions, the vehicle starts. Various power management faults can be stored: * 213901 - Power management: Reduction or shutdown of individual electrical consumer * 8040BD - Reset or deactivation of Terminal 30F * 8040B9 - De-activation of terminal 30B: Top start capability limit reached * 8020E8 - Reset or deactivation of terminal 30F * 800E89 - FRM: start capability limit reached with lights active during stationary mode * 93076B - Deactivation of terminal 30B: upper start capability limit reached * 93076A - Deactivation of terminal 15: upper start capability limit reached, but deactivation preventer active * 93076C - Deactivation of terminal 30B: upper start capability limit reached, but deactivation preventer or legal loads active * 930769 - Deactivation of terminal 15: upper start capability limit reached Note: When the outside temperatures drop below 46F, the charging system is switch to full charge. CAUSE * The check control message (ID 229) is caused by a heavily discharged battery. * The check control message is triggered when the current state of charge (SoC) of the battery approaches the minimum SoC that is required to start the vehicle (start capability limit). * In low outside ambient temperatures, the start capability limit of the vehicle is higher. Therefore it takes more energy from the battery to start a cold engine. * Without the early warning of the check control message, the current state of charge would drop below the start capability limit and the vehicle would not start. * The vehicle's intelligent power management system actively takes measures to increase the charge of the battery, such as increasing idle speed and reducing or shut
- 10148101iPhone: Connection Failures with iOS 7. There are various connectivity failures with the iPhone using iOS 7. Some examples are listed below: * Call disconnection * Contact List incomplete * General connection failures CAUSE Apple software iOS 7 and its variants.
- 10148087External Engine Oil Leaks and Repairs. During the vehicle's operational life, normal engine oil seepage or sweating, in addition to accumulated road dust, dirt and grime in the engine compartment can cause the appearance of a more severe oil leak. This is further exaggerated by residual oil that remains on the engine assembly after maintenance services are performed, e.g., oil filter changes, "engine oil top-offs," etc. If this visual appearance of accumulated oil on the engine assembly as an "active leak" is misinterpreted, unnecessary gasket repairs/replacements will result. Specifically, our analysis of the claim-related data for vehicles equipped with the engines noted in this bulletin is showing an above-average number of engine gasket repair/replacement claim submissions. The purpose of this bulletin is to provide your workshop with information and a procedure that will help in identifying engine oils leaks that do and do not require a repair.
- 10148034"Intelligent Battery Sensor Diagnosis Hints. The vehicle enters the workshop with one or more of the following complaints: * Check Control Message related to battery discharge * No-start condition * Consumer power reduction (reduced blower speed, heated seats operation, etc.) * The following fault codes may be stored in the DME a. 2E8B - Intelligent battery sensor, signal b. 2E8C - Intelligent battery sensor, function c. 2E8D - Intelligent battery sensor, signal transmission d. 2E8E - Intelligent battery sensor, communication CAUSE A faulty battery or IBS sensor (not both) The power management system and IBS in the vehicle cannot determine if the battery needs to be replaced. This is normal operation for all E-Series vehicles because they do not have the Advanced IBS sensor that the F-Series vehicles do. An external battery tester (Midtronics EXP-1000) must be used to determine if the battery needs to be replaced. Energy Diagnosis will not prompt for a battery replacement unless the battery is ""aged."" When energy diagnosis identifies the battery as ""aged,"" it means the amount of energy discharge over the course of the life of the battery has reached its maximum (worn out). In most cases, energy diagnosis states that the battery is OK. This is typically an indication of the current State of Charge (SoC), not the State of Health (SoH). The SoC is defined as the current amount of energy left in the battery (displayed as a percentage). The SoH is defined as an evaluation of the condition of the battery over a period of time (displayed as a percentage). For more information about batteries, refer to Training Manual ST051, ""07 Battery Basics."""
- 10148018"?SI B01 09 14 September 2014 WarrantiesWarranties This Service Information bulletin supersedes SI B01 09 14 dated August 2014. Please read this Service Information bulletin in its entirety, the content has been completely updated. designates changes to this revision SUBJECT Front Passenger Air Bag Seat Occupancy Sensor (OC3) Mat: Limited Warranty Extension to 15 years Without Mileage Limitation. INFORMATION BMW of North America, LLC (""BMW NA"") is extending the limited warranty for the Supplemental Restraint System's (SRS) front passenger air bag seat occupancy sensor (OC3) mat on certain model BMW vehicles to: 15 years without mileage limitation as determined by the vehicle's original in-service date. This ""component-specific"" limited warranty extension applies to defects in materials and workmanship. This bulletin is notice of a ""limited warranty extension."" This is NOT a notice of a Recall or Service Action. No immediate repair is required unless the BMW vehicle is currently experiencing this problem. This extended limited warranty coverage does not apply to vehicles affected by the following Recall Campaign: Recall 13V-564: E90, E91 Front Passenger Air Bag Seat Occupancy Sensor MatRecall 13V-564: E60, E61,E65, E66 Front Passenger Air Bag Seat Occupancy Sensor MatSI B65 08 14Recall Campaign 13V-564: Replace Front Passenger Air Bag Seat Occupancy Sensor (E60, E61, E65, E66)Recall 13V-564: E65,E66 Front Passenger Air Bag Seat Occupancy Sensor Mat (E65, E66)Recall 13V-564: Front Passenger Air Bag Seat Occupancy Sensor Mat for Sport Seat (E60, E61, E65, E66)Recall 13V-564: E53 Repair Front Passenger Air Bag Seat Occupancy Sensor MatThe extended limited warranty coverage also does not apply to: ??Vehicles with other seat options, and ??E60 (M5) vehicles Note: Please refer to SI B65 75 06 for the limited warranty extension information that applies to previous models. Customer Notification Letter - VIN and Component-specific Warranty Extension Even tho
Every BMW 525I model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.