2006 BMW 530I
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2006 BMW 530I. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2006 BMW 530I. Newest first.
BMW of North America, LLC (BMW) is recalling certain 2006 525i, 525xi, 530i, 530xi, 530xi Sports Wagon, 325i, 325xi, 325xi Sports Wagon, 330i, 330xi, Z4 3.0i and Z4 3.0si vehicles. The heater for the positive crankcase ventilation (PCV) valve may short circuit.
Risk and remedy
Risk
An electrical short can cause the parts within the PCV valve to melt, increasing the risk of a fire, even when the vehicle is not in use.
Remedy
BMW will notify owners, and dealers will replace the PCV valve heater, free of charge. The recall began May 30, 2019. Owners may contact BMW customer service at 1-800-525-7417. Note: This recall is an expansion to recall 17V-683.
BMW of North America, Inc. (BMW) is recalling certain 2006 325i, 325xi, 330i, 330xi, 525i, 525xi, 530i, 530xi, and 550i vehicles equipped with the Sport Seat option and certain 2006 525i, 525xi, 530i, 530xi, 550i vehicles with standard seats. The front passenger seat occupant detection mat that determines if, and how, the passenger frontal air bag should…
Risk and remedy
Risk
Should the system fail, in the event of a crash, the front passenger air bag would be deactivated, increasing the risk of personal injury.
Remedy
BMW will notify owners, and dealers will repair the occupant detection mat to eliminate the possibility that it may crack, replacing it as necessary, free of charge. The recall began September 1, 2017. Owners may contact BMW customer service at 1-800-525-7417.
BMW of North America LLC (BMW) is recalling certain model year 2006 325i, 325xi, 330i, 330xi sedans and 325xi sports wagons, model year 2007 328i, 328xi, 335i, 335xi sedans and 328i and 328xi sports wagons, model year 2006-2007 525i, 525xi, 530i, 530xi, 550i sedans and 530xi sports wagons, model year 2006 760i sedans, model year 2006-2007 750i, 750Li, and…
Risk and remedy
Risk
Should the system fail, in the event of a crash, the front passenger air bag would be deactivated, increasing the risk of personal injury.
Remedy
BMW will notify owners with an interim notification letter in January 2014 since parts are not currently available. When parts are available, BMW sent a second letter in August and dealers will repair the occupant detection mat to eliminate the possibility that it may crack, free of charge. Additionally, owners of model year 2006-2007 3 Series with standard seats, 5 Series with comfort seats, and Z4 models, will receive an extended warranty on their front passenger seat occupant detection mat. Owners may contact BMW customer relations at 1-800-525-7417 or email BMW at CustomerRelations@bmwusa.com.
Owner complaints
84 complaints1 involved a crash4 involved a fire2 injuries
What owners report most
Latest complaints
- Unknown or other
The contact owned 2006 BMW 530I. The contact received unknown recall notifications and requested to be removed from the recall distribution list because he no longer owns the vehicle. The dealer and the manufacturer were contacted. The manufacturer referred the contact to the NHTSA Hotline for assistance. The VIN was unavailable.
- Unknown or other
The vehicle caught fire on the highway / interstate. Completely burnt down. The incident has been reported to the insurance company. But still haven't had any feedback . The vehicle is located at the tow place. It is not drivable it's completely burnt. Pierce the fire started in the engine.
- Engine and engine cooling
The contact owns a 2006 BMW 530I. The contact received notification of the NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2006 BMW 530I. The contact received notification of the NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The local dealer was notified of the issue and confirmed that parts were not yet available. The contact stated that on multiple occasions while the vehicle was idling, the vehicle lunged forward with the check engine warning light intermittently illuminated. The contact stated that a certified mechanic inspected the vehicle and determined that an O2 sensor, coil, and other unknown failures were affected by the recall. Additionally, the contact stated that she had to add a quart of oil every 400 miles. The contact also noticed a burning odor throughout the vehicle. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 156,000.
- Engine
My serpentine belt broke causing my car to shut down. Apparently only BMW’s have a terrible design that the belt gets sucked into the engine and then the engine is gone. No other cars have this design. There are thousands of this model vehicle that are dead cars being sold online. This seems to be a problem
- Engine and engine cooling
The contact owns a 2006 BMW 530I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall…
The contact owns a 2006 BMW 530I. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Engine and engine cooling
The contact owns a 2006 BMW 530i. The contact stated that while driving, the engine temperature was extremely hot. While the vehicle was parked inside the garage, the cooling fan continued to run. There were no warning lights illuminated. The vehicle was taken to an independent mechanic where the…
The contact owns a 2006 BMW 530i. The contact stated that while driving, the engine temperature was extremely hot. While the vehicle was parked inside the garage, the cooling fan continued to run. There were no warning lights illuminated. The vehicle was taken to an independent mechanic where the heat pump and thermostat were placed. The contact received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. VIN tool confirms parts not available. The failure mileage was approximately 43,000.
- Air bags · Engine and engine cooling · Seat belts
The contact owns a 2006 BMW 530i. The contact received notification of NHTSA Campaign Number: 19V273000 (Engine and Engine Cooling) and 22V119000 (Engine and Engine Cooling) however, the parts to do the recall repairs were not yet available. The contact stated that the manufacturer had exceeded a…
The contact owns a 2006 BMW 530i. The contact received notification of NHTSA Campaign Number: 19V273000 (Engine and Engine Cooling) and 22V119000 (Engine and Engine Cooling) however, the parts to do the recall repairs were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repairs. The contact stated that air bag and seat belt warning lights were illuminated. the contact took the vehicle to the dealer and was informed that air bag and seat belt needed to be repaired. The vehicle was not repaired. The manufacturer was not made aware of the failure. The approximate failure mileage 100,000. VIN tool confirms parts not available.
- Engine and engine cooling
The contact owns a 2006 BMW 530i. The contact stated upon coming to a complete stop, the vehicle would shudder significantly. Additionally, the contact stated that the engine was misfiring while driving. The transmission warning light and another unknown warning light illuminated. The contact…
The contact owns a 2006 BMW 530i. The contact stated upon coming to a complete stop, the vehicle would shudder significantly. Additionally, the contact stated that the engine was misfiring while driving. The transmission warning light and another unknown warning light illuminated. The contact stated that upon parking the vehicle in the driveway, he smelled a strong burning plastic odor. The contact turned off the vehicle. The vehicle was not diagnosed or repaired. The contact later received notification of NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The vehicle was not diagnosed or repaired. The failure mileage was approximately 217,000. VIN tool confirms parts not available.
- Engine
2006 BMW 5 series. Consumer wites seeking reimbursement for vehicle repairs related to saftey recall 22v-119.
- Engine and engine cooling
The contact owns a 2006 BMW 530i. The contact stated while driving approximately 35 MPH, the vehicle was smoking and came to a complete stop. The contact stated that several unknown warning lights were illuminated. The vehicle was towed to the residence and then to a local dealer. The dealer…
The contact owns a 2006 BMW 530i. The contact stated while driving approximately 35 MPH, the vehicle was smoking and came to a complete stop. The contact stated that several unknown warning lights were illuminated. The vehicle was towed to the residence and then to a local dealer. The dealer diagnosed the vehicle with engine and transmission failure. The vehicle was not repaired. The manufacturer was not notified of the failure. The contact related the failure to NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling). The failure mileage was unknown.
- Engine and engine cooling
The contact owns a 2006 BMW 530i. The contact stated while driving at approximately 65 MPH, the contact observed an unspecified "yellow" warning light on the dash and heard a small explosion sound issue from the engine compartment. The contact stated that smoke began to come out from under the…
The contact owns a 2006 BMW 530i. The contact stated while driving at approximately 65 MPH, the contact observed an unspecified "yellow" warning light on the dash and heard a small explosion sound issue from the engine compartment. The contact stated that smoke began to come out from under the hood. The contact turned the vehicle off and set the transmission to "neutral" coasted off the roadway onto the left shoulder and stopped. The vehicle was on fire in the engine compartment. The contact extinguished the flames with a fire extinguisher. The contact had the vehicle towed to his residence. The contact had not taken the vehicle to a dealer or an independent mechanic. The contact received a recall letter and related the failure to NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling). The vehicle was not repaired. The manufacturer had not been informed of the failure. The failure mileage was approximately 150,000.
- Engine
The contact owns a 2006 BMW 530i. The contact stated while driving approximately 15 MPH, the vehicle started smoking from the engine and steering wheel. There was no fire in the vehicle. The check engine light illuminated on the instrument panel. The contact pulled over safely to the side of the…
The contact owns a 2006 BMW 530i. The contact stated while driving approximately 15 MPH, the vehicle started smoking from the engine and steering wheel. There was no fire in the vehicle. The check engine light illuminated on the instrument panel. The contact pulled over safely to the side of the road. The vehicle was cooled down and then was driven to an independent mechanic who was unable to determine the cause of the failure. The vehicle was not repaired. The contact stated that the failure persisted. The manufacturer was not notified of the failure. The approximate failure mileage was 2,000.
- Engine and engine cooling
The contact owns a 2006 BMW 530i. The contact stated upon taking the vehicle to an independent mechanic to be serviced, he was informed that the VIN was included in NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The…
The contact owns a 2006 BMW 530i. The contact stated upon taking the vehicle to an independent mechanic to be serviced, he was informed that the VIN was included in NHTSA Campaign Number: 22V119000 (Engine and Engine Cooling) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the vehicle had experienced excessive oil consumption. The manufacturer was not made aware of the failure. The low engine oil pressure warning light was illuminated. The failure mileage was approximately 8,000. VIN tool confirms parts not available.
- Air bags
The contact owns a 2006 BMW 530i. The contact stated that upon starting the vehicle, the passenger’s side air bag warning light illuminated, and remained illuminated. Additionally, the check engine and brake warning lights also illuminated. The contact had not taken the vehicle to a dealer to be…
The contact owns a 2006 BMW 530i. The contact stated that upon starting the vehicle, the passenger’s side air bag warning light illuminated, and remained illuminated. Additionally, the check engine and brake warning lights also illuminated. The contact had not taken the vehicle to a dealer to be diagnosed. The failure was intermittent. The vehicle had not been repaired. The manufacturer had not been informed of the failure. The failure mileage was approximately 127,000.
- Electrical system › 12v/24v/48v battery
The contact owns a 2006 BMW 530i. The contact stated that the battery drained quickly, which caused the contact to frequently replace the battery. The vehicle was taken to an independent mechanic however, the mechanic could not duplicate the failure. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 100,000.
- Air bags
Approximately two months ago (March 2021) the instrument panel airbag and seat belt warning lights had begun to remain on. The BMW dealer determined it was a faulty front passenger air bag occupancy sensor mat which was then replaced and repaired at the owner's expense. This defect was…
Approximately two months ago (March 2021) the instrument panel airbag and seat belt warning lights had begun to remain on. The BMW dealer determined it was a faulty front passenger air bag occupancy sensor mat which was then replaced and repaired at the owner's expense. This defect was specifically covered in a Service Information bulletin SB-10056703-9690, dated September 2014, which superseded SI B01 09 14, dated August 2014, which extended BMW's limited warranty to 15 years, without mileage limitation, if the warning light came on within the extended 15 year period. Unfortunately, BMW corporate determined this defect was not within the 15 year period based on the vehicle's in-service date. Said BMW is an original owner vehicle with less than 45,000 miles or driven an average of 3,000 miles per year.
- Electrical system · Exterior lighting · Visibility/wiper
Headlights would take turns randomly working, then one night both headlights turned off while I was going around a corner at 55mph. This was in the country no street lights. Just as I came to a blind stop there both kicked back on. After getting home I took apart to find some wires were rotting…
Headlights would take turns randomly working, then one night both headlights turned off while I was going around a corner at 55mph. This was in the country no street lights. Just as I came to a blind stop there both kicked back on. After getting home I took apart to find some wires were rotting other already bare, and others cracking. I pray this doesnt happen to anyone else because if this problem isn't fixed someone's going to die. Also if someone does crash I pray to god they can quickly get out of car before all those bare wires behind headlight get smashed together and the fire starts.
- Seats
I was driving on the street with my music in low when I noticed the driver car seat getting hot. I hadn't turned on the heated seats and I touched the passengers seat and it was cool. It was to hit for me to drive I had to sit coward so my back wouldn't touch the seat. It was so uncomfortable and dangerous. I've read a lot of comments of people having this happen to them. I have a 2006 BMW 530I
- Air bags
Car gave a passenger restraint system malfunction error that has been identified in two prior nhtsa recall campaigns that include the the 2006 BMW 530I.
- Electrical system
Car shut off middle of highway very dangerous and deadly all because key lost code...how if it's in the ignition and I've been driving over several miles
- Electrical system · Engine · Power train
My airbag light came on for no reason one day and will not go off I initially got a recall paper for it but was unable to take it to the shop I van no longer find the paper but the transmission IS trash
- Engine · Unknown or other
Manufactures recall vehicle was relocated and now unknown
- Air bags · Air bags › Sensor › Occupant classification · Seats
Passenger seat sensor faulty, airbag disabled. Faults are showing, and warning lights are on. I have called the dealer and BMW USA, both acknowledge an issue but insist my car IS not covered. The vin IS not on their roster. BMW recalled 200,000 cars for this problem, in the same year and model. I now have the issue, and it IS a clear safety concern for any who might ride in the car.
- Service brakes
TL* the contact owns a 2006 BMW 530I. The contact stated that the brake vacuum pump was leaking oil into the power brake booster. The diagnosis was completed by an independent mechanic who specialized in BMW vehicles. The dealer (global imports BMW, 500 interstate n pkwy, atlanta, ga 30339, (800)…
TL* the contact owns a 2006 BMW 530I. The contact stated that the brake vacuum pump was leaking oil into the power brake booster. The diagnosis was completed by an independent mechanic who specialized in BMW vehicles. The dealer (global imports BMW, 500 interstate n pkwy, atlanta, ga 30339, (800) 294-1853) was called and the contact was waiting to hear back. The manufacturer was not contacted. The failure mileage was 140,000.
- Electrical system · Power train · Vehicle speed control
My airbag light IS on and my transmission has an issue as if it needs to be replaced after research I found out that mechatronics and other components to be an issue for instance if your trying to pass your car stalls and says transmission failure after shutoff message disappears car will go in…
My airbag light IS on and my transmission has an issue as if it needs to be replaced after research I found out that mechatronics and other components to be an issue for instance if your trying to pass your car stalls and says transmission failure after shutoff message disappears car will go in limp mode and car starts out in 2ND gear instead of 1ST and 1ST gear will also lock itself.....this IS dangerous for a supposed high end well built performance vehicle. Tranny has no issues computer does that causes shutter and stall limp mode nearly could have died
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249437The basic conditions for initializing the power windows are not met.
- 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
- 10247567Engine will crank but not start. There is no communication with the integrated fuel module (TFE) whendiagnosing with ISTA. The following two fault codes will be stored in the DME: 032B43 - Low fuel pressure system, electric fuel pump: pressure value too low CDA594 - Message (- 0x33E) missing, receiver DME, transmitter TFE
- 10245422Customers may state that the alarm system (DWA) is not active after locking their unoccupied vehicle. Depending on the vehicles equipment and settings, no acoustic or optical confirmation (folding the mirrors/blinking confirmation) is noticeable. Additionally, the red anti-theft alarm LED in the interior mirror does not briefly flash every 2 seconds, indicating the alarm is armed.
- 10218384Vehicle cannot be opened or closed using comfort access, engine start is not possible, and the vehicle may not start when placing the key against the steering column. Note: Opening, closing and starting via the BMW Digital Key or the Digital Key Card are not affected.
- 10194296Diagnosis of Compound Brake System Complaints in M Vehicles: 1. Visible cracks are caused by high thermal stresses during rapid heating and cooling of the brake discs. Braking from high speed with cold brake components (less than 212 degrees F) increases the likelihood of cracks to form.
- 10182619Discharged Battery Energy Diagnosis Must Be Performed: The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle "discharged battery" complaints. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion, with all results taken into consideration. Without performing the energy diagnosis test plan, the root cause of the discharged battery cannot be identified. This increases the chances of a repeat repair.
- 10181214Power Reduction, FC2A82 Intake VANOS and/or FC2A87 Exhaust VANOS Camshaft Fault: The ?Service Engine Soon? (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If theignition is cycled, the engine then usually performs normally.
- 10175267Power Reduction FC2A82 Intake VANOS and/or FC2 A87 Exhaust VANOS Camshaft Fault: The "Service Engine Soon" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled the engine then usually performs normally.
- 10162428Various Electrical Problems Caused by Water Ingress. Water ingress into the luggage compartment may cause various electrical problems or faults associated with the MPM (Micro Power Module); PDC (Park Distance Control); M-ASK (Multi-Audio System Controller); CCC (Car Communication Computer); CID (Control Information Display); TCU (Telematics Control Unit); LOGIC-7 (Top Hi-Fi); RDC (Tire Pressure Monitor) or SDARS (Satellite Radio Receiver) control modules. In most cases, the water collects in the spare wheel recess. CAUSE: Insufficient sealing may allow water to enter the luggage compartment due to the vacuum generated while driving.
- 10162416"Power Reduction, FC 2A82 Intake VANOS and/or FC 2A87 Exhaust VANOS Camshaft Faults are Stored in DME. The ""Service Engine Soon"" (MIL) lamp is illuminated and engine power reduction is perceived. This situation can occur after driving for some time with the engine at full operating temperature. If the ignition is cycled, the engine then usually performs normally. The following faults are stored in the DME: * 2A82 VANOS intake - stiff; jammed mechanically * 2A87 VANOS exhaust - stiff; jammed mechanically * 130108 VANOS intake: control fault, position not reached * 130308 VANOS exhaust: control fault, position not reached For the N54 engine, the following secondary faults may also be stored: * 120408 Charge-air pressure control, cut-out: Boost pressure accumulation blocked * 3100 Boost-pressure control, deactivation - boost-pressure buildup prohibited CAUSE The VANOS faults can be caused by an insufficient oil pressure supply to the inlet VANOS adjustment unit. To effectively move the camshafts to the target positions in the specified time and under all engine conditions, sufficient oil pressure supply to the VANOS control pistons must always be available. If engine operation requires the VANOS system to quickly advance or retard the intake or exhaust camshaft, faults may be stored if the camshaft is ""late"", or does not reach the target position. In this situation, engine power may be reduced and a check control message is displayed. The consequential fault 3100 or 120408 can also be set in the DME fault memory as well."
- 10151335Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware.
- 10151323ELV Does Not Release. The customer complains of a no-crank, no-start situation. The condition may be intermittent. The ELV (Electric Steering Lock) warning is shown in the Instrument Cluster.
- 10151300N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints This Service Information bulletin and attachment supersedes SI B11 06 16 dated April 2016.. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
- 10151247N51, N52, N52K and N52T Engines: Various Eccentric Shaft Sensor Faults stored in the DME - Diagnostic Hints. The customer may complain about one of the following: Rough engine running Engine cannot be started (crank no start) Check Engine Light illuminated One or more of the following faults may be stored in the DME: 2A37 - Valvetronic, eccentric shaft sensor plausibility 2A47 - Valvetronic, eccentric shaft, signal plausibility 134E08 - Eccentric shaft plausibility (on F10, F25 vehicles only) CAUSE The VVT eccentric shaft sensor connector, and/or DME connector may have oil contamination due to oil leakage at the VVT sensor gasket.
- 10151119SI B84 03 14 February 2016 Communication Systems Technical Service This Service Information bulletin supersedes SI B84 03 14 dated October 2014. SUBJECT Bluetooth Connection Failures. There are various connectivity failures with the following devices: Apple iPhones Samsung S6 and the S6 Edge. Connectivity failure examples are: Call disconnection - Call is transferred back to the handset. In some instances the call is then transferred back to the vehicle. Contact List incomplete General connection failures CAUSE Apple iOS software (issue started with iOS 8.3 continues with iOS 9.x and its variants) Samsung S6 and S6 Edge device firmware CORRECTOPM None available at this time. We are currently working with the device manufacturer on a solution.
- 10151115SUBJECT Audio System Speaker Testing. For audio system speaker testing there is a NED (Non Electrical Diagnosis) Test Plan available. CAUSE We previously recommended use of the Audio Test CD (ATC) from BMW. This CD has been discontinued.
- 10151068This Service Information bulletin supersedes SI B07 03 14 dated October 2015. Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Fault codes stored in vehicles being serviced are not being diagnosed, leading to repeat repair visits (source- Analysis of FASTA data and repeat repair visit reports). INFORMATION Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) to find their root cause during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
- 10151023Whistling Noise Coming from the Center Vent - A/C is Off . A very high pitched whistling or beeping noise is heard coming from the center vents. The flow of refrigerant through the expansion valve at certain temperature differentials.
- 10150385"CCC - ""Please Insert Navigation DVD"" Appears on CID. The navigation map DVD cannot be read or detected. The message ""Please insert navigation DVD"" appears in the CID (Central Information Display). The navigation system is inoperative. This situation may also occur when upgrading to a new navigation map. The old map is recognized but the new one is not. CAUSE Faulty DVD drive; read error due to hardening of the anti-vibration gel on the read head"
- 10150330"Discharged Battery: Energy Diagnosis Must Be Performed. The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle ""discharged battery"" complaints. A discharged battery can have various causes, most of which do not concern the battery itself. A failed battery is often the symptom and not the cause. A fully serviceable battery fails when an electrical component causes the battery to discharge; the battery becomes internally damaged and must be replaced. For more information, refer to www.batteryuniversity.com/parttwo-42B.htm For this reason, replacing the battery is not usually a permanent repair. The cause of the discharged battery must be analyzed in order to guarantee a proper repair. In order to properly repair the vehicle the first time in the workshop, it is very important that the diagnostic test plans are performed to completion with all results taken into to consideration. The procedure as outlined below contains information that will guide the technician into properly repairing the vehicle and getting paid for a warranty claim. CAUSE Refer to the ""Procedure"" section of this Service Information for details."
- 10150130The vehicle position is missing or incorrect on the navigation map. The navigation system integrated in the Car Information Computer (CIC) is not calibrated correctly.
- 10150099N54 Engine: Fuel Pressure Control Test Plan Error. INFORMATION Not applicable.
- 10150095Intermittent Hydraulic Valve Adjuster (HVA) Noise. An occasional ticking or rattling noise from the camshaft hydraulic valve lifters (HVA) may occur during cold engine starts, due to frequent short-distance driving, or the noise may occur for an extended period of time even though the engine is at operating temperature. Improved parts were phased into production beginning on 10/1/2008 and fully implemented on November 31st 2008.
- 10150065"BMW NA has agreed to extend the emissions warranties of the turbocharger's wastegate to: ??8 years or 82,000 miles, whichever occurs first, as determined from the vehicle's original in-service date select the ""Vehicle Comment"" button to display the extended coverage information. The terms of the original New Vehicle/SAV Limited Warranty and applicable emissions warranty still apply. BMW NA will not provide warranty coverage to any Settlement Class Member's vehicle containing modifications or alterations to the turbocharger or its wastegates (software, hardware or otherwise), or evidencing other conditions not normally covered under the original New Vehicle/SAV Limited Warranty or applicable emissions warranty. Modifications excluded from warranty coverage include any aftermarket parts that affect the turbocharger system, or if there are other conditions that would normally exclude it from warranty coverage."
- 10149605Battery Replacements. A failed battery in the vehicle is being replaced with a battery of a different size and type, which can lead to additional labor to retrofit the differently sized battery. CAUSE In the past, the 110 AH Lead acid battery was not available. The 90/92 AH AGM battery was installed as an alternative replacement; this required retrofitting.
- 10149589"N54 Engine: Diagnosis of Cold Start Rough Running with Misfire Faults. The customer may complain that during the cold start in the morning, the engine runs very roughly and the Service Engine Soon lamp is illuminated. Various misfire fault codes (e.g., 29CC, 29D2, 29D1, 29D0, 29C0, 29CF) may be stored in the DME control module. The engine rough running complaint can be reproduced on a cold start in the workshop. During the course of diagnosis, the spark plugs, removed from the misfiring cylinders after the problem was reproduced, are found to be soaked (""wet"") with fuel, while the injector tips are covered with a layer of carbon deposit. Possible cause: high-pressure injector failure (leakage or incorrect spraying pattern) due to internal wear or unfavorable stock of tolerances IMPORTANT: For comprehensive N54 drivability diagnostics, always refer to the ""N54 Engine Diagnostic Fault Tree"" file (the current version ""02_14_13"" is found as a PDF attachment to SI B12 55 06)."
- 10149382iPhone: Connection Failures with iOS 7. There are various connectivity failures with the iPhone using iOS 7. Some examples are listed below: z Call disconnection z Contact List incomplete z General connection failures Apple software iOS 7 and its variants
- 10149279Diagnosing Stored Fault Codes to Help Avoid Repeat Repair Visits. Analysis of FASTA data and repeat repair visit reports indicates that there are many fault codes that are stored in the above vehicles, but they are not diagnosed to identify their root cause. Fault codes that are not diagnosed to find their root cause can lead to a repeat repair visit to the workshop by the customer. Where diagnosis (vehicle or short test) with ISTA has already started, it is important to diagnose the fault code(s) listed below (when they are stored in the vehicle) during the current workshop visit. This will help lead to a reduction in workshop repeat repair visits and higher customer satisfaction.
- 10148423Check Control Messages Related to Battery Charge During Cold Ambient Temperatures. On cold days with an outside ambient temperature of less than 15F, customers may notice a check control message related to the battery that is displayed on the instrument cluster and the control information display. Under these conditions, the vehicle starts. Various power management faults can be stored: z 213901 - Power management: Reduction or shutdown of individual electrical consumer z 8040BD - Reset or deactivation of Terminal 30F z 8040B9 - De-activation of terminal 30B: Top start capability limit reached z 8020E8 - Reset or deactivation of terminal 30F z 800E89 - FRM: start capability limit reached with lights active during stationary mode z 93076B - Deactivation of terminal 30B: upper start capability limit reached z 93076A - Deactivation of terminal 15: upper start capability limit reached, but deactivation preventer active z 93076C - Deactivation of terminal 30B: upper start capability limit reached, but deactivation preventer or legal loads active z 930769 - Deactivation of terminal 15: upper start capability limit reached Note: When the outside temperatures drop below 46F, the charging system is switch to full charge. CAUSE z The check control message (ID 229) is caused by a heavily discharged battery. z The check control message is triggered when the current state of charge (SoC) of the battery approaches the minimum SoC that is required to start the vehicle (start capability limit). z In low outside ambient temperatures, the start capability limit of the vehicle is higher. Therefore it takes more energy from the battery to start a cold engine. z Without the early warning of the check control message, the current state of charge would drop below the start capability limit and the vehicle would not start. z The vehicle's intelligent power management system actively takes measures to increase the charge of the battery, such as increasing idle speed and reducing or shutting
- 10148376Previously assigned radio channels to the satellite radio "Presets" list have been erased and radio channels selected from the list "All channels" menu cannot be stored in the "Presets" list. The problem occurred after the recently implemented Sirius/XM channel lineup change. The data handling between the satellite radio receiver (SDARS-Exbox) and the Car Communication Computer (CCC head unit) has been corrupted.
- 10148276Traffic Information Is Inoperative. The traffic information is intermittently or permanently inoperative. * Traffic flow is not displayed on the navigation map. * The traffic list is empty. 1. The Offboard Availability (backend) system is unavailable and is not sending traffic information. 2. The traffic information feature is not activated correctly.
- 10148273Check Control Messages Related to Battery Charge During Cold Ambient Temperatures. On cold days with an outside ambient temperature of less than 15F, customers may notice a check control message related to the battery that is displayed on the instrument cluster and the control information display. Under these conditions, the vehicle starts. Various power management faults can be stored: * 213901 - Power management: Reduction or shutdown of individual electrical consumer * 8040BD - Reset or deactivation of Terminal 30F * 8040B9 - De-activation of terminal 30B: Top start capability limit reached * 8020E8 - Reset or deactivation of terminal 30F * 800E89 - FRM: start capability limit reached with lights active during stationary mode * 93076B - Deactivation of terminal 30B: upper start capability limit reached * 93076A - Deactivation of terminal 15: upper start capability limit reached, but deactivation preventer active * 93076C - Deactivation of terminal 30B: upper start capability limit reached, but deactivation preventer or legal loads active * 930769 - Deactivation of terminal 15: upper start capability limit reached Note: When the outside temperatures drop below 46F, the charging system is switch to full charge. CAUSE * The check control message (ID 229) is caused by a heavily discharged battery. * The check control message is triggered when the current state of charge (SoC) of the battery approaches the minimum SoC that is required to start the vehicle (start capability limit). * In low outside ambient temperatures, the start capability limit of the vehicle is higher. Therefore it takes more energy from the battery to start a cold engine. * Without the early warning of the check control message, the current state of charge would drop below the start capability limit and the vehicle would not start. * The vehicle's intelligent power management system actively takes measures to increase the charge of the battery, such as increasing idle speed and reducing or shutting
- 10148194iPhone 6, 6 Plus, 5, 5S, 5C, 4S, 4, and 3GS with iOS 8.x Information. INFORMATION There is one major difference in functionality since iOS 8.0 was released. Scenario: z The customer leaves the vehicle and turns his or her phone off. z He or she turns the phone back on. z He or she enters the vehicle, but does not unlock the phone and start driving. Result: z The phone reconnects to the Bluetooth system (normal). z However, it does not transfer the contact list (not normal). z The contact list in the iDrive will be empty. z The call list in the Kombi will display only phone numbers, but no names. z The hands-free system works for accepting calls and conversing on calls started on the phone. Solution: z Prior to the customer entering the vehicle they must unlock the phone (passkey) With the release of Apple's new iPhone 6, 6 Plus and iOS 8.x software, there have been many questions regarding the new phone and software. The information in the attachment to this Service Information will help answer these questions. A printed copy can be given to the customer if needed. The attachment provides information on the differences between the new iPhone 6, 6 Plus and the previous versions, along with Apple software improvements in the following areas: 1. Visual comparison 2. Connectivity 3. Functionality Refer to the PDF file in the "Attachment" section of this bulletin for complete details. Information on the iPhone 6 is also available via the following: z www.bmwusa.com/bluetooth website NOTE: This SI will be updated as new information is received.
- 10148135ConnectedDrive/BMW Assist System Diagnosis Information. ConnectedDrive/BMW Assist features are partially or completely inoperative. This Service Information bulletin is being published because vehicles are down for an extended period of time when researching system failures with ConnectedDrive or BMW Assist. This Service Information bulletin will assist you both in identifying the issue and providing technical support. CAUSE Not enough information is available for BMW NA engineers to assist the technician in diagnosing the root cause.
- 10148120Check Control Messages Related to Battery Charge During Cold Ambient Temperatures. On cold days with an outside ambient temperature of less than 15F, customers may notice a check control message related to the battery that is displayed on the instrument cluster and the control information display. Under these conditions, the vehicle starts. Various power management faults can be stored: * 213901 - Power management: Reduction or shutdown of individual electrical consumer * 8040BD - Reset or deactivation of Terminal 30F * 8040B9 - De-activation of terminal 30B: Top start capability limit reached * 8020E8 - Reset or deactivation of terminal 30F * 800E89 - FRM: start capability limit reached with lights active during stationary mode * 93076B - Deactivation of terminal 30B: upper start capability limit reached * 93076A - Deactivation of terminal 15: upper start capability limit reached, but deactivation preventer active * 93076C - Deactivation of terminal 30B: upper start capability limit reached, but deactivation preventer or legal loads active * 930769 - Deactivation of terminal 15: upper start capability limit reached Note: When the outside temperatures drop below 46F, the charging system is switch to full charge. CAUSE * The check control message (ID 229) is caused by a heavily discharged battery. * The check control message is triggered when the current state of charge (SoC) of the battery approaches the minimum SoC that is required to start the vehicle (start capability limit). * In low outside ambient temperatures, the start capability limit of the vehicle is higher. Therefore it takes more energy from the battery to start a cold engine. * Without the early warning of the check control message, the current state of charge would drop below the start capability limit and the vehicle would not start. * The vehicle's intelligent power management system actively takes measures to increase the charge of the battery, such as increasing idle speed and reducing or shut
- 10148101iPhone: Connection Failures with iOS 7. There are various connectivity failures with the iPhone using iOS 7. Some examples are listed below: * Call disconnection * Contact List incomplete * General connection failures CAUSE Apple software iOS 7 and its variants.
- 10148087External Engine Oil Leaks and Repairs. During the vehicle's operational life, normal engine oil seepage or sweating, in addition to accumulated road dust, dirt and grime in the engine compartment can cause the appearance of a more severe oil leak. This is further exaggerated by residual oil that remains on the engine assembly after maintenance services are performed, e.g., oil filter changes, "engine oil top-offs," etc. If this visual appearance of accumulated oil on the engine assembly as an "active leak" is misinterpreted, unnecessary gasket repairs/replacements will result. Specifically, our analysis of the claim-related data for vehicles equipped with the engines noted in this bulletin is showing an above-average number of engine gasket repair/replacement claim submissions. The purpose of this bulletin is to provide your workshop with information and a procedure that will help in identifying engine oils leaks that do and do not require a repair.
- 10148034"Intelligent Battery Sensor Diagnosis Hints. The vehicle enters the workshop with one or more of the following complaints: * Check Control Message related to battery discharge * No-start condition * Consumer power reduction (reduced blower speed, heated seats operation, etc.) * The following fault codes may be stored in the DME a. 2E8B - Intelligent battery sensor, signal b. 2E8C - Intelligent battery sensor, function c. 2E8D - Intelligent battery sensor, signal transmission d. 2E8E - Intelligent battery sensor, communication CAUSE A faulty battery or IBS sensor (not both) The power management system and IBS in the vehicle cannot determine if the battery needs to be replaced. This is normal operation for all E-Series vehicles because they do not have the Advanced IBS sensor that the F-Series vehicles do. An external battery tester (Midtronics EXP-1000) must be used to determine if the battery needs to be replaced. Energy Diagnosis will not prompt for a battery replacement unless the battery is ""aged."" When energy diagnosis identifies the battery as ""aged,"" it means the amount of energy discharge over the course of the life of the battery has reached its maximum (worn out). In most cases, energy diagnosis states that the battery is OK. This is typically an indication of the current State of Charge (SoC), not the State of Health (SoH). The SoC is defined as the current amount of energy left in the battery (displayed as a percentage). The SoH is defined as an evaluation of the condition of the battery over a period of time (displayed as a percentage). For more information about batteries, refer to Training Manual ST051, ""07 Battery Basics."""
- 10148018"?SI B01 09 14 September 2014 WarrantiesWarranties This Service Information bulletin supersedes SI B01 09 14 dated August 2014. Please read this Service Information bulletin in its entirety, the content has been completely updated. designates changes to this revision SUBJECT Front Passenger Air Bag Seat Occupancy Sensor (OC3) Mat: Limited Warranty Extension to 15 years Without Mileage Limitation. INFORMATION BMW of North America, LLC (""BMW NA"") is extending the limited warranty for the Supplemental Restraint System's (SRS) front passenger air bag seat occupancy sensor (OC3) mat on certain model BMW vehicles to: 15 years without mileage limitation as determined by the vehicle's original in-service date. This ""component-specific"" limited warranty extension applies to defects in materials and workmanship. This bulletin is notice of a ""limited warranty extension."" This is NOT a notice of a Recall or Service Action. No immediate repair is required unless the BMW vehicle is currently experiencing this problem. This extended limited warranty coverage does not apply to vehicles affected by the following Recall Campaign: Recall 13V-564: E90, E91 Front Passenger Air Bag Seat Occupancy Sensor MatRecall 13V-564: E60, E61,E65, E66 Front Passenger Air Bag Seat Occupancy Sensor MatSI B65 08 14Recall Campaign 13V-564: Replace Front Passenger Air Bag Seat Occupancy Sensor (E60, E61, E65, E66)Recall 13V-564: E65,E66 Front Passenger Air Bag Seat Occupancy Sensor Mat (E65, E66)Recall 13V-564: Front Passenger Air Bag Seat Occupancy Sensor Mat for Sport Seat (E60, E61, E65, E66)Recall 13V-564: E53 Repair Front Passenger Air Bag Seat Occupancy Sensor MatThe extended limited warranty coverage also does not apply to: ??Vehicles with other seat options, and ??E60 (M5) vehicles Note: Please refer to SI B65 75 06 for the limited warranty extension information that applies to previous models. Customer Notification Letter - VIN and Component-specific Warranty Extension Even tho
Every BMW 530I model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.