1999 BMW 5 Series
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › BMW › 5 Series › 1999
These records cover every 1999 BMW 5 Series. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 1999 BMW 5 Series. Newest first.
ZF Group North America Operations (ZF) is recalling certain Lemförder Steering Center Rods sold as aftermarket parts for 1996-2004 BMW 5-Series (E39) vehicles. The steering center rods may have an insufficient ball pin pull force that may allow the rods to detach from the steering knuckle.
Risk and remedy
Risk
If the steering rod detaches from the steerable wheel knuckle, it can cause sudden loss of steering control, increasing the risk of a crash.
Remedy
ZF has notified the parts distributors, instructing them to inform the end customer. ZF will reimburse them for the affected parts. The recall began August 28, 2019.
Owner complaints
2 complaints
What owners report most
Latest complaints
- Service brakes, air › Antilock › Control unit/module
I have a 1999 BMW 528I with intermittent ABS controller issue, which activates at low rate of speed. I went to the dealership and they replaced the ABS sensor. The next day it activated again. I returned to the dealership, they did a diagnostic and stated the ABS repair kit IS bad. I asked what IS…
I have a 1999 BMW 528I with intermittent ABS controller issue, which activates at low rate of speed. I went to the dealership and they replaced the ABS sensor. The next day it activated again. I returned to the dealership, they did a diagnostic and stated the ABS repair kit IS bad. I asked what IS that and they stated it controls the ABS system on my car and the part IS $1000. I am a member of roadfly.org, which IS a network consisting of BMW owners sharing information about issues and tips. My concern IS this IS a safety issue and its a known problem with the BMW (E39). I would like the manufacturer to check the www.roadfly.org message board on the BMW E39 1997-2001.
- Service brakes, hydraulic › Antilock/traction control/electronic limited slip › Control unit/module
ABS controller failure. Very high failure rate during this production period. Some reports of uncontrolled application of brakes at high speeds. Bmwna sales of the ABS modulator and/or repair unit will reflect this claim.*ak
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10249437The basic conditions for initializing the power windows are not met.
- 10244242Various functions of the camera-based driver assistance systems (ADCAM system) can lead to customer complaints.
- 10142928SERVICE ACTION: PROGRAM DME (FOR O2 SENSORS): Due to DME software error, the following oxygen sensors plausibility fault codes may be stored in DME 5.2.1 control module:
- 10135028SERVICE ACTION: PROGRAM DME: The incorrect dataset could be programmed into DME 5.2.1 control module.
- 10051519BMW: the high-voltage (hv) battery cells could be damaged if the vehicle IS prevented from entering sleep mode for an extended period of time. Updated 03/11/2013
- 10051439BMW: intermittently goes into park during a msa engine start. The transmission can intermittently go into the park position (p) when msa engine start IS occurring. A drive gear can be selected in order to drive away, and no relevant faults are stored.
- 10044024BMW: wipers lights and front power windows are inoperative. This situation may start and lead to a permanent fault. Also included model F07 (5 series gran turismo) model years up to march 2012.
- 10035246BMW vehicles: replaced seat occupancy sensor mat will not enable. After replacing a cis (capacitive sensing passenger occupancy mat), the new mat will not enable when using ista/p. However, ista/p shows that the acsm (active crash safety module) was coded correctly. The following faults are stored in the acsm control module:9309ed, 9309f4 and 930a23. Adsm coding
- 10035244BMW vehicle: adaptive headlights. A check control (cc) message IS displayed for the adaptive headlights. The headlamps no longer turn with steering wheel movement. Fault code 800fc6 IS entered in the footwell module (FRM3). A second turn signal request IS made at the exact moment when the steering wheel IS automatically cancelling from a previous turn signal request. F07 (5 series), F01, F02, F07 (7 series).
- 10032987BMW: instrument cluster-failure of displays/functions. Total or partial failure of displays or functions in the instrument cluster. The displays or functions start working again after the vehicle has been parked (sleep mode). Internal error in the processing of incoming messages from the k can bus. There may be various can message errors stored in the fault memory.
- 10029684BMW: service engine soon lamp or the check gas cap warnings are illuminated while driving. When diagnosed, the dme has stored faults for small leak, micro leak, super fine leak, or large leak in relation to the tank ventilation or evaporative system updated 10/27/09.
- 10029605BMW service campaign: see document search button for owner letter. The airbag warning lamp (awl) IS illuminated, together with the passenger airbag status lamp (pol). The problem may be intermittent. Microcracks in the OC3 seat mat. Updated 9/30/11.
- 10029444BMW: vehicle has a check control message self leveling suspension failed/malfunctioning displayed. At least one of the following fault codes IS stored and IS currently present in the ehc control unit: 5F98 control time fault lifting rear left; 5F99 control time fault lifting rear right; 5F9A control time fault lifting. Model years unknown. Updated 11/17/10.
- 10029257BMW: all instrument dials are inoperative and the illumination of the information display in the instrument cluster IS very bright.
- 10029025BMW: small number of vehicles experience problems ranging from leaking oil filler caps, leaking or broken valve covers, to complete engine failure in extremely cold climate conditions. Moisture accumulating in engine crankcase ventilation valve or hoses can freeze due to low ambient temperatures.
- 10025584N54 rattle noise from turbocharger area. Models E90, E92 and E93 (3 series) 335I and 335xi; E60 and E61 (5 series) 535I and 535xi, all with N54 engine from the start of production to january 17, 2008 production.
- 10025573N52 edk throttle jamming faults 2D09, 2CED and 2CEC. Model E90 and E91 (3 series) and E60 and E61 (5 series), all models up to 11/2005 with N52 engine.
- 10025571Instrument cluster: failure of displays/functions. Model E60, E61 (5 series) and E63, E64 (6 series).
- 10015410Check engine lamp illuminated and/or vehicle overheats. BMW E90 (3 series) all E90 (3 series) and E60 (5 series) models equipped with N52 engine.
- 606039Subject regarding "reprogramming of transmission control module may not be possible" error message.
Every BMW 5 Series model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.