2016 BMW X1 Sav

Recalls

1 recall names the 2016 BMW X1 Sav. Newest first.

• Air bags › Frontal › Passenger side › Inflator module

  Jan 26, 2017NHTSA 17V06200016,771 vehicles

  BMW of North America, LLC (BMW) is recalling certain 2016-2017 X1 xDrive28i and X1 sDrive28i vehicles. The affected vehicles have an instrument panel that may not allow the front passenger air bag to deploy properly in the event of a crash.

  Risk and remedy

  Risk

  In the event of a crash, if the front passenger air bag does not deploy properly, it can increase the risk of injury.

  Remedy

  BMW will notify owners, and dealers will replace the instrument panel, free of charge. The recall began May 2017. Owners may contact BMW customer service at 1-800-525-7417.

  Full recall details →

Owner complaints

What owners report most

1. Air bags1
2. Electrical system1
3. Engine1
4. Fuel/propulsion system1
5. Power train1
6. Seat belts1
7. Seats1
8. Vehicle speed control1

Latest complaints

• Apr 23, 2019MI24,000 miFire
  Electrical system · Seats
  When I extend the passenger seat all the way to the back, the fuse blows up. There are sparks under the seat. After that all the buttons towards passenger seat are not responsive. I took it to the dealer same day and they fixed it on the same day by replacing the fuse. As soon as I got the car, I…

  When I extend the passenger seat all the way to the back, the fuse blows up. There are sparks under the seat. After that all the buttons towards passenger seat are not responsive. I took it to the dealer same day and they fixed it on the same day by replacing the fuse. As soon as I got the car, I tried extending the seat and fuse blows up again. The dealer took it for 2 weeks, checks it and just returns it saying the faulty wire has been trimmed and advised me not to adjust the seat. They did not give me any permanent solution. When I contacted BMW customer service regarding this matter, I got the same response advising me not to adjust the seat. I was told that this IS a very common issue. It had 24K miles when this happened. The issue IS not resolved as of today.

• Nov 7, 2018PA20,000 mi
  Vehicle speed control
  Occasionally when the adaptive cruise control IS active, the collision warning will light and the brakes automatically applied even though there IS nothing in front of the car. This has occurred on a straight, flat road with no shadows, undulations, or cars anywhere in sight. This IS a huge safety…

  Occasionally when the adaptive cruise control IS active, the collision warning will light and the brakes automatically applied even though there IS nothing in front of the car. This has occurred on a straight, flat road with no shadows, undulations, or cars anywhere in sight. This IS a huge safety hazard since it has happened with cars traveling immediately behind me at a high rate of speed. BMW techs cannot ID the problem and say they have never heard of it. The problem IS infrequent and highly unlikely to occur during a test drive. Met today with a BMW na technical service expert who insisted that I was 'confusing' this problem with the system's normal operation. Not so. My lease ends in 2 months and I don't want the next owner to get rammed from behind.

• Nov 18, 2017MA12,000 mi
  Engine · Fuel/propulsion system · Power train

  2016 BMW X1 xdrive 28I hesitates when accelerating from a stop at random times. the delay can take up to 1 second before the accelerator responds and the vehicle starts moving. this creates a dangerous situation when trying to merge with traffic.

• Oct 30, 2017ARCrash1 injury
  Air bags · Seat belts
  On 10/28, my daughter was involved in a frontal offset head on collision with a chevy silverado. The impact occurred inside of a turning lane where the chevy was traveling approx. 15 mph, and my daughter began accelerating out of the turn lane at 5-10mph when they collided. The silverado's airbags…

  On 10/28, my daughter was involved in a frontal offset head on collision with a chevy silverado. The impact occurred inside of a turning lane where the chevy was traveling approx. 15 mph, and my daughter began accelerating out of the turn lane at 5-10mph when they collided. The silverado's airbags deployed, the bmws did not. No front airbags or knee airbags deployed. She hit her head on the steering wheel, while wearing her seatbelt, so this also begs the question, why the seatbelt pretensioners did not hold her back from the steering wheel. BMW 's also come equipped with emergency flashers upon accident, that did not happen either. My impression IS that none of the BMW safety systems went into effect during this collision. BMW assist also never called, which again IS another touted BMW safety system in all their cars.

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Desiccated Air Bag Inflator Rupture

  EA21002Opened Sep 17, 2021Open
  From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…

  From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10249435Customer complains of a musty odor or damp front footwell carpet.
• 10249027The electrical system of BMW vehicles has been subject to an ongoing development process over the last few years. This has led to increased demands being placed on the battery. This document covers important information for the dealer on how to handle discharged battery complaints.
• 10238090After programming the head unit (HU-H2), activating the FSC (German word Freischaltcode) Enabling Codes repeatedly fails.
• 10238081Upon opening and closing the tailgate, a creaking/groaning sound can be heard from tailgate actuator.
• 10235205The 3G network in the US has been shut down. This means that only the 4G network will be available. In the 4G network, voice calls will be transferred via the Voice over LTE (VoLTE) function. For this purpose, the SIM card must perform an IMS registration in the mobile communication network. Due to a production error, the telematics control units were delivered without an IMS configuration. The Connected Drive voice services (Concierge Call, BMW Assistance, and emergency call voice) can no longer be used regionally in the US in vehicle with telematics control units ATM-1 and TCB-4G. Voice control of the vehicle and all other telephone (paired mobile devices) functions are not affected. Emergency call location data is unaffected.
• 10235192The buttons on the gear selector switch (GWS) do not work, or the function indicator lighting has failed.
• 10235183While driving on rough roads, a knocking sound can be heard coming from top of the instrument panel (aka dashboard) in the bulkhead area.
• 10228428During load reversal or taking off from a stop, there is a creaking or droning noise heard from the lower engine area.
• 10228427During a vehicle inspection and/or while addressing a customer's concern, the engine stabilizer bar/link appears to be worn.
• 10216793TEC26 Turbo Charger Return
• 10216792Tec25 Wishbone Return
• 10216791Tech24 Snap-in Adapter Return
• 10216758MINI engine oil part number transition and model year 2016 engine oils
• 10216757MINI "Enhanced" dealer self authorized (DSA)K goodwill program
• 10215752The following complaints may be noticed while slow maneuvering with a steering input of 80-100% (at or near full lock, e.g., parking lot maneuvers) or accelerating with a medium to large steering angle: Humming or creaking noises from the rear area, slight vibrations also noticeable from the driver's seat. The vehicle may also jerk slightly.
• 10214989Mist formation on the windshield inside surface may occur at departure or after MSA (automaticstart/stop). Acoustic abnormality in the area of the recirculated air flap (recirculation flap closing and opening severaltimes). The above may occur individually or in combination.
• 10212796The Check Control message "Door open" appears in the instrument cluster (Kombi) even though all vehicle doors are closed and locked. The locking operation of the doors is not affected.
• 10212525Customer complains of musty odor or damp front footwell carpet.
• 10206685Any or all of the following CCM ID code 14/15/16/17 "door open" appear in the instrument cluster when the door is properly closed and locked. The locking operation of the door is not affected by the incorrect display.
• 10204657Different air temperatures are felt from left to right out of the front fresh air grilles (air vents).
• 10202472The contactless tailgate opening/closing function (Smart Opener) is inoperative.
• 10201145Different air temperatures are felt from left to right out of the front fresh air grilles (air vent). The following fault code is saved in the IHKA (integrated automatic heating/air conditioning system) control unit: 801189 - Engine mixed air right: Initialization fault.
• 10200487TELEMATICS UNIT DEACTIVATION DUE TO 3G CELLULAR TECHNOLOGY DISCONTINUATION: The discontinuation of 3G cellular communication for Combox, TCB 3G and ATM 3G (Telematics ControlModule) can no longer be supported by the cellular network provider starting February 2022.
• 10200246Customer states the Central Information Display is flickering and the picture is shifting.
• 10200222For the eligible vehicles that are not covered under the State of California PZEV (SULEV) emission regulation, BMW of North America, LLC (BMW NA) is extending the limited warranty for the vehicles fuel tank vent (purge) valve
• 10188941DOOR PAINT STREAKS: Streaks are found running mostly vertically down along the door outer skin from the lower window trim. This can affect any of the 4 side doors.
• 10184587Water Ingress In Footwell Area From A/C Condensate Drain: Water Ingress In Footwell Area From A/C Condensate Drain. Customer complains of musty odor or damp front footwell carpet.
• 10184584Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full: Low Washer Fluid Warning Light is illuminated when the Washer Fluid Tank is Full.There are no faults stored in the system for the washer fluid level switch.
• 10182921CONDENSATION FROM AIR CONDITIONING LEAKS INTO PASSENGER FOOTWELL: Condensation from the air conditioning systems evaporator drips, below the instrument panel, into the passenger's footwell. During assembly, the cover of the fresh air intake was not fully seated when the screws were tightened. This cover can then leak condensation out through the existing gap.
• 10182920BUZZING NOISE IS HEARD WHEN AIR CONDITIONING IS DEACTIVATED: A buzzing noise is heard when the air conditioning (A/C) is deactivated while the vehicle is in park or neutral. Prior to turning off the A/C, the system was functional and cooling properly. A/C compressor, or The power supply to the A/C compressor is too low.
• 10182622CONDENSATION FROM AIR CONDITIONING LEAKS INTO PASSENGER FOOTWELL: Condensation from the air conditioning systems evaporator drips, below the instrument panel, into the passenger's footwell. During assembly, the cover of the fresh air intake was not fully seated when the screws were tightened. This cover can then leak condensation out through the existing gap.
• 10182621BUZZING NOISE IS HEARD WHEN AIR CONDITIONING IS DEACTIVATED: A buzzing noise is heard when the air conditioning (A/C) is deactivated while the vehicle is in park or neutral. Prior to turning off the A/C, the system was functional and cooling properly. A/C compressor, or The power supply to the A/C compressor is too low.
• 10181224SERVICE ACTION - PROGRAM THE BODY DOMAIN CONTROL (BDC) UNIT: Aftermarket scan tools cannot read fault codes in the Dynamic Stability Control (DSC) unit via the On-Board Diagnostic (OBD) socket. The DSC data is not processed correctly in the BDC and therefore cannot transmit any diagnostic requests via the OBD using aftermarket scan tools.
• 10179813DELIVERY STOP - OBD ACCESS IN DSC CONTROL UNIT: Aftermarket scan tools cannot read fault codes in the Dynamic Stability Control (DSC) unit via the On Board Diagnostic (OBD) socket. The DSC data is not processed correctly in the BDC and therefore cannot transmit any diagnostic requests via the OBD using aftermarket scan tools.
• 10179009NAVIGATION SYSTEM - REPORTING MISSING OR INCORRECT ROADMAP DATA: Do not replace parts and do not program the vehicle. Roads can change by up to 15% every year. To ensure the best navigation experience, we do everything in our power to create the best maps. Your reports help us to detect changes in your area and keep future versions of our maps as accurate as possible. Therefore, a road map error or missing data must be reported directly to the map supplier.
• 10179004TAILGATE MALFUNCTION WHEN OPENING OR CLOSING: Customer may complaint of any the following scenarios: When operating the tailgate by using any of the tailgate buttons, the movement stops Tailgate opens when the remote control is within the proximity of the rear of the vehicle, and a second person opens any of the doors using the outside door handle Tailgate opens again immediately after closing Erroneous ground signal set by the contactless tailgate opening control unit (smart-opener).
• 10178993NOISES FROM THE FUEL TANK AT IDLE: All vehicles except the F48 (X1): While driving slowly with low RPM or while idling a faint knocking or fluttering noise can be heard from inside the fuel tank with a low fuel level (approximately less than 2 gallons). The customer may describe this noise as a "helicopter noise" from the rear of the vehicle. F48 (X1) only: While driving slowly with low RPM or while idling a faint knocking or fluttering noise can be heard from inside the fuel tank when the tank is full. The customer may describe this noise as a "helicopter noise" from the rear of the vehicle. CAUSE Pressure fluctuations from the tank ventilation valve will cause the fuel tank filler pipe non-return valve to vibrate. In some cases, the vibration can be heard inside the vehicle.
• 10177614F48 FUEL TANK VENT/PURGE VALVE LTD WARRANTY EXTENSION: This component-specific limited warranty extension applies to defects in materials or workmanship.
• 10176377CCM DISPLAYED "INCREASED BATTERY DRAIN" CAUSED BY CONTROLLER: A yellow CCM (Check Control Message) ID 415 is displayed- "Increased battery drain! // Battery. Electrostatic discharge at standstill / start engine. Energy management" The results of the Energy Diagnosis test plan identifies the Controller as the root cause of the CCM. The Controller delays the vehicle going to sleep by up to 6 minutes. In some cases this will cause the CCM 415 to be displayed when starting the vehicle. Replacing the Controller in this case will not correct this situation.
• 10176363TANK VENTILATION AND MIXTURE CONTROL FAULTS STORED IN THE DME: The Engine Malfunction Warning is illuminated and one or more of the following faults are stored in the DME. All models: FC 191C02 - Fuel tank ventilation system 2nd discharge point: malfunction FC 195014 - Differential pressure sensor tank vent valve signal: fixed FC 118001 - Mixture control: mixture too lean FC 118401 - Mixture control: mixture too lean large deviation I01 only: FC 124103 - Mixture control: mixture too lean FC 124101 - Mixture control: Mixture lean large deviation CAUSE Internal mechanical defect in the tank ventilation valve. The defect can also result in a very loud clicking noise when the valve is cycling.

Every BMW X1 Sav model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.