2010 Dodge Challenger
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Challenger › 2010
These records cover every 2010 Dodge Challenger. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2010 Dodge Challenger. Newest first.
Chrysler (FCA US LLC) is recalling certain 2010 Dodge Ram 3500, Ram 4500/5500, 2010-2011 Dodge Dakota, 2010-2014 Dodge Challenger, 2010-2015 Dodge Challenger, Chrysler 300, and 2010-2016 Jeep Wrangler vehicles. Upon deployment of the driver's frontal air bag, excessive internal pressure may cause the inflator to explode.
Risk and remedy
Risk
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could explode with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 4, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V01.
Chrysler (FCA US LLC) is recalling certain 2009-2013 Jeep Wrangler, Chrysler 300, Dodge Challenger and Dodge Charger vehicles, and 2009-2011 Dodge Dakota vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 28, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U03.
Chrysler (FCA US LLC) expanded the affected population to include 73,712 2005-2009 RAM 2500 trucks produced at the St. Louis North Assembly Plant. With this change, Chrysler is recalling certain model year 2004-2008 RAM 1500, 2005-2009 RAM 2500, 2006-2009 RAM 3500, 2007-2010 RAM 3500 Cab Chassis, 2008-2010 RAM 4500 and 5500 Cab Chassis, 2004-2009 Dodge…
Risk and remedy
Risk
These vehicles are equipped with certain air bag inflators assembled as part of the passenger frontal air bag modules, and used as original equipment or replacement equipment. These inflators may rupture due to propellant degradation occurring after long-term exposure to absolute humidity and temperature cycling. An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify the Chrysler, Dodge, Jeep and RAM owners. Mitsubishi owners will be notified by their company. Dealers will replace the passenger frontal air bag inflator, free of charge. The recall began on March 27, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is S43. Note: This recall supersedes recall 14V-7700.
Chrysler (FCA US LLC) is recalling certain model year 2008-2010 Dodge Challenger vehicles manufactured September 19, 2007, to October 29, 2010. The affected vehicles are equipped with a dual-stage driver frontal air bag that may be susceptible to moisture intrusion which, over time, could cause the inflator to rupture.
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicle until the recall repair is complete. Chrysler will notify owners, and dealers will replace the driver's frontal air bag inflator, free of charge. The recall began on November 17, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R37.
Chrysler IS recalling certain model year 2010 chrysler sebring, 300, charger (LX) and dodge challenger (LC), avenger (js), and journey (jc), as well as model year 2011 dodge RAM light duty pickup (DS) vehicles. some of these vehicles may experience a separation at the crimped end of the power steering pressure hose assembly.
Risk and remedy
Risk
Leaked power steering fluid onto hot engine components could cause a fire.
Remedy
Dealers will inspect and replace as necessary the power steering pressure hoses free of charge. the safety recall began on december 20, 2010. owners may contact chrysler at 1-800-853-1403.
Chrysler IS recalling certain model year 2010 chrysler 300, dodge challenger, charger, jeep commander, grand cherokee and dodge RAM vehicles. these vehicles may have been built with a wireless ignition node (win) module exhibiting a binding condition of the solenoid latch.
Risk and remedy
Risk
The result of the defect could lead to a condition where the key may be removed from the ignition switch (win module) prior to placing the shifter in park. this could result in the potential for unintended vehicle movement and could increase the risk of a crash.
Remedy
Dealers will inspect and replace the win module free of charge. the safety recall IS expected to begin on or before august 23, 2010. owners may contact chrysler at 1-800-853-1403.
Chrysler IS recalling certain model year 2009 through 2010 passenger vehicles equipped with rear wheel drive. these vehicles may have been built without a front wheel spindle nut.
Risk and remedy
Risk
While driving, a tire and wheel separation could occur increasing the risk of a crash.
Remedy
Dealers will inspect the tire and wheel assembly and if found without a spindle nut it will be repaired free of charge. the recall began on november 2, 2009. owners may contact chrysler at 1-800-835-1403.
Owner complaints
299 complaints10 involved a crash4 involved a fire13 injuries
What owners report most
Latest complaints
- Service brakes
ABS control module failure resulting in no ABS brakes , traction control or ESP
- Engine
Was driving and a tick was present then over heated sat on side of road until cooled down added coolant drove home . The next day car was drivable. Drove to school and car was sounding funny so took it to a repair shop and they told me the particular engine in the vehicle has a fuel efficient…
Was driving and a tick was present then over heated sat on side of road until cooled down added coolant drove home . The next day car was drivable. Drove to school and car was sounding funny so took it to a repair shop and they told me the particular engine in the vehicle has a fuel efficient component where it shuts down the cylinders on the freeway, and the lifters are supposed to open, but our lifter did not open. It got stuck and grind the camshaft in the motor. Needless to say I had to have the car towed home. It’s just sitting in my parking lot. I tried calling Dodge. They wouldn’t help me. I tried calling multiple agencies to help. I looked up on the Internet and there is multiple complaints about the same problem it’s called the hemi lift so hopefully one day this can be recalled because I’m still paying on the car. I had a year and a half. No one will help me. My kids were driving the car. What if the thing blew up on them on the freeway and somebody hit them because Car wouldn’t move anymore . Or if they were taking the car through the desert and there is no phone calls and no one around. If they were going around corners of a mountain and just stopped on them or blew up because can’t drive the car anymore. very bad and scary and sad that the builder of that motor won’t fix their mistake and leave countless people stranded and in a predicament
- Air bags · Electrical system › Instrument cluster/panel
The contact owns a 2010 Dodge Challenger. The contact stated that upon starting the vehicle, there was an abnormal sound coming from the instrument panel. The vehicle was taken to a dealer where it was diagnosed that the instrument panel was damaged and needed to be replaced. The vehicle was not…
The contact owns a 2010 Dodge Challenger. The contact stated that upon starting the vehicle, there was an abnormal sound coming from the instrument panel. The vehicle was taken to a dealer where it was diagnosed that the instrument panel was damaged and needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The contact stated that the battery was replaced. The contact had received notification on NHTSA Campaign Number: 16V352000 (AIR BAGS). The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The failure mileage was 185,000. Parts distribution disconnect.
- Air bags · Service brakes · Structure › Body
My vehicle was stolen in downtown New York
- Air bags · Electrical system · Engine
As documented in the previous report.
- Air bags · Electrical system · Engine
I need to address a serious issue regarding the car I purchased in 2020 from a private vendor. Upon taking the car to Crown Dodge Dealership in Ventura County for repair, I had to pay roughly $700 out of pocket for the service and rented a car from Hertz for the days I was without my car. However…
I need to address a serious issue regarding the car I purchased in 2020 from a private vendor. Upon taking the car to Crown Dodge Dealership in Ventura County for repair, I had to pay roughly $700 out of pocket for the service and rented a car from Hertz for the days I was without my car. However, upon receiving the car back, it still had unresolved issues with the electrical components and dashboard noise. It is unacceptable that the manager at the dealership did not prioritize my safety or the quality of the car I purchased. Since this car is my sole mode of transportation, I demand a prompt resolution to this matter. I expect immediate assistance in addressing these concerns. Thank you.
- Electrical system · Steering · Unknown or other
Was driving normally going 65 mph on the highway when white smoke was emitting from inside the steering wheel. Between the dashboard and steering wheel. Engine was fine and no warning lights came on. Everything ran great except for the white smoke. I don’t know what it could be. Luckily it didn’t catch on fire
- Engine
I experienced a catastrophic timing chain failure despite prior recall work being performed by Dodge that supposedly resolved their known timing chain issues with the 5.7L hemi with automatic transmission. This failure occurred without any prior warning at a cruising speed of about 65 MPH…
I experienced a catastrophic timing chain failure despite prior recall work being performed by Dodge that supposedly resolved their known timing chain issues with the 5.7L hemi with automatic transmission. This failure occurred without any prior warning at a cruising speed of about 65 MPH rendering the car undrivable. There were no warning lights, drivability issues, or signs of the impending failure. This is a well-maintained car with only 80,000 miles, never missing a required oil change and other maintenance tasks. Timing chains should not fail at such low milage - indeed, timing belts will last longer before they fail. This failure occurred on a major highway placing me and other motorists in danger from the car being unmovable and potentially causing a high-speed collision on a 70 MPH highway. If this had occurred less than 0.5 miles down the road, both shoulders of the roadway were closed due to road widening construction. A certified letter with pictures of the timing chain and timing chain guide failures with a receipt for associated repairs was sent the to the manufacturer in December 2023 but they have not given me the courtesy of a reply. The engine was replaced by an independent mechanic at an out-of-pocket cost of $13,217.38 and the pictures were taken at that time by the repair shop.
- Engine
The contact owns a 2010 Dodge Challenger. The contact stated that while driving at an undisclosed speed, the vehicle lost motive power and stalled. Additionally, the low engine oil warning light was illuminated. The contact stated that the failure had reoccurred approximately three or four times.…
The contact owns a 2010 Dodge Challenger. The contact stated that while driving at an undisclosed speed, the vehicle lost motive power and stalled. Additionally, the low engine oil warning light was illuminated. The contact stated that the failure had reoccurred approximately three or four times. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was not made aware of the failure. The failure mileage was approximately 40,000.
- Service brakes
ABS Module Failure. All repair parts discontinued from 2008-2014 for Manual Transmissions. Safety issue will not allow operations of Anti lock brakes
- Power train
The clutch stick broke while driving and putting it on gear.
- Engine · Power train
The Gen III hemi has an inherent design flaw in which the rollers making contact with the camshaft will fail, causing damage to the camshaft and causing the engine to misfire. This is due to the camshaft being moved away from the crankshaft as it causes oil starvation. After extensive research it…
The Gen III hemi has an inherent design flaw in which the rollers making contact with the camshaft will fail, causing damage to the camshaft and causing the engine to misfire. This is due to the camshaft being moved away from the crankshaft as it causes oil starvation. After extensive research it appears to affect cars of various miles and workload. There is no single cause that makes this happen other than a grievous design flaw. The main complaint is that you experience total power loss at higher revs, making it dangerous to drive on the interstate or attempting to merge into traffics as the engine begins to shudder and lose most power. Whether it’s 40K miles or 110K miles, the flaw does not discriminate. After numerous attempts to reach Chrysler technical service on how to prevent this, I’ve been ignored and case numbers deleted. Now this is very important. This causes a misfire which not only destroys catalytic converters, but arrives with no notice. It’s very possible someone may be attempting to pass someone on the interstate and suddenly lose power. My mechanic inspected it and confirmed that the rollers failed, causing causing lifters to not make proper clearance. This needs to be investigated as this engine is in millions of cars. And even if 1% of these failure occur on an interstate, the potential for fatalities is absolutely nothing to ignore. I kindly ask that this matter be investigated. As not everyone can afford the 5K to fix this problem like I can. And due to its high prevalence in trucks, this could cause those who use their trucks for work to be put in a tight spot. I understand normal wear and tear, but by no means should a cam and valve train fail this soon in a car. Giving the Gen III hemi by Chrysler and their infamous timing chain defect, I believe this is also a dangerous flaw and something Chrysler ignored. Hoping it would outlast warranties. Best regards.
- Power train › Automatic transmission › Control module (tcm/pcm/tecm)
The contact owns a 2010 Dodge Challenger. The contact stated while driving at an undisclosed speed, the tire sensor, battery, and check engine warning lights were illuminated. The vehicle was taken to an independent mechanic and diagnosed as a powertrain control module failure, which caused the…
The contact owns a 2010 Dodge Challenger. The contact stated while driving at an undisclosed speed, the tire sensor, battery, and check engine warning lights were illuminated. The vehicle was taken to an independent mechanic and diagnosed as a powertrain control module failure, which caused the battery and alternator to fail. The mechanic informed the contact that the powertrain control module needed to be replaced. The dealer was made aware of the failure and referred the contact to the manufacturer. The vehicle was not repaired. The manufacturer was made aware of the failure and referred the contact to file a complaint with NHTSA. The failure mileage was approximately 57,000.
- Unknown or other
Car stall no warning lite. Car has stalled when driving on the freeway, when exiting the Freeway as well at making turns. This has been happening for about 3 years. Seems to only happen during the summer months. The dodge dealership said that they would not be able to identify the problem unless a warning lite was on or they test drive and it happens. The problem doesn't happen all the time it's sporadic.
- Electrical system · Engine · Steering
The car has an intermittent issue where at highway speeds it will go into almost a limp mode. Basically the check engine light comes on and car loses power and won't go over 45 mph. I have to pull over and shut car off. It will restart and operate normally for a random period of time. Very…
The car has an intermittent issue where at highway speeds it will go into almost a limp mode. Basically the check engine light comes on and car loses power and won't go over 45 mph. I have to pull over and shut car off. It will restart and operate normally for a random period of time. Very dangerous when on the highway and have to pull over to the side of the road. From the forums I belong to, this is a very common problem. There are even members that have bought a brand new Challenger and had this happen to them after a few months. The code that usually appears from this is misfire on cylinder 1 and even the dealerships don't know what causes it and hard to diagnose since it happens randomly. Love the car but very annoyed that this keeps happening and no one can figure out the fix
- Fuel/propulsion system
Problem: fuel fumes in the cabin of my 2010 challenger stationary and in motion (city and highway). the fuel tank IS located under the rear seat in dodge challengers, chargers and the chrysler 300. internet searches regarding fuel fumes in the cabin revealed numerous complaints regarding fuel…
Problem: fuel fumes in the cabin of my 2010 challenger stationary and in motion (city and highway). the fuel tank IS located under the rear seat in dodge challengers, chargers and the chrysler 300. internet searches regarding fuel fumes in the cabin revealed numerous complaints regarding fuel pump o-ring leaks. There are u-tube videos available for the home mechanic. however, it IS unreasonable to expect that an owner perform this repair due to the exposure to gasoline and the possibility of fire or explosion. my challenger IS a limited edition mopar10 with meticulous maintenance at the dealership when it was purchased. It had only 60,958 miles when I took it to the dealership on 01/28/21. they had to replace the fuel pump o-rings at a cost of $396.00 ($96 in parts and $300 in labor). I have never had this problem in any vehicle that I have owned, new or used, since 1978. the exposure to gasoline fumes IS a well known health hazard especially in a closed environment such as a vehicle cabin. for the car with only 60K miles with meticulous maintenance being performed by one dealership and a safety issue with many complaints on the internet, warrants an investigation of dodge and chrysler repair records on this issue. A $400 repair IS 25% parts and 75% labor. I respectfully submit that a recall has be issued. please note that my dodge dealer has been exceptional regarding customer care. however, they did not offer to repair this defect free of cost because no recall exists on this issue. my dealership IS jim click dodge in tucson, arizona. the repair invoice number IS ddcs759163. you have my permission to use my personal data on this invoice to create a recall. thank-you, randy sturgeon, retired federal law enforcement agent.
- Air bags
I have received a letter about an airbag safety recall. I went to dealership to get it fixed. the dealer said that they not going to fixed it because my car got to a car accident before, so they could not perform recall due to airbag deployed. The lady said no dealership will fixed it. I want to…
I have received a letter about an airbag safety recall. I went to dealership to get it fixed. the dealer said that they not going to fixed it because my car got to a car accident before, so they could not perform recall due to airbag deployed. The lady said no dealership will fixed it. I want to know if I am going to get any credit so that I can get it fixed, or am I going to be the one who IS going to pay to fix it out of my pocket. Please feel free to contact me at [xxx] or [xxx] please see the attachment. thank you. information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6). *tr
- Fuel/propulsion system
Strong gas smell inside the car when parked or driving fogs the windshield leading to poor visibility got a diagnostic done by meineke turns out it's due to cracked fuel pumps had it repaired at a cost of $1000 turns out there are 8 similar complaints on the website I believe your institution should do a recall since it's a danger to the driver and the public
- Air bags · Unknown or other
On december 11, 2019, my son was about to leave for work when the horn starting blowing in the car and wouldn't stop. The car was stationary. After about 4 minutes it stopped. I took the car to supreme chevrolet in plaquemine where I purchase the car from. The car was checked out and told that I…
On december 11, 2019, my son was about to leave for work when the horn starting blowing in the car and wouldn't stop. The car was stationary. After about 4 minutes it stopped. I took the car to supreme chevrolet in plaquemine where I purchase the car from. The car was checked out and told that I was going to need another horn, they had ordered one and it should be in in about 3 days. When I went to the service area to pick up the car, the guy told me that the horn and airbag had been taken out and they had put something around the stirring wheel to hold it down until the horn can be replaced. I have checked back multiple times and they are still saying they cannot locate the horn for my car. It's very dangerous to drive a car without a horn and an airbag. Today IS october 23, 2020 and I have yet to get a horn and airbag for the car.*dt*dt*jb*jb
- Engine
My car wont start I replaced the alternator and the battery a few times. But somthing keeps draining the battery. Where I have been stalled on highway 5 late at night.
- Engine
Severe engine damage due to safety recall. Diagnosis IS defective recall part. Car stalled at dealership going on 3 weeks. Manufacture does not want to complete work until manufacturer approves warranty. Fca llc IS yet to approve.
- Unknown or other
While making a right turn, the car just died outta nowhere, also seen in dodge forums where this happens a lot
- Electrical system
TL* the contact owns a 2010 dodge challenger. The contact stated that the ignition key could not be removed from the ignition which caused the battery to discharge. A locksmith was called to the scene and the key was removed. The contact indicated the vehicle experienced several electrical failures…
TL* the contact owns a 2010 dodge challenger. The contact stated that the ignition key could not be removed from the ignition which caused the battery to discharge. A locksmith was called to the scene and the key was removed. The contact indicated the vehicle experienced several electrical failures while the key was ceased in the ignition. The contact stated that due to the failure the vehicle stalled while being driven. The vehicle was taken to the local dealer tallahassee dodge (3987 w. Tennessee st. Tallahassee fl) who replaced the ignition module. The manufacturer was not notified of the failures. The failure mileage was 124,000.*dt*jb
- Unknown or other
2010 dodge challenger driver smart glass goes up and down and drains battery. Dodge states this IS problem on 2011
- Engine · Power train · Unknown or other
Car has stalled several times while driving above 60 mph. Seems like loses power and fuel pump shuts off. Had to pull over and restarts with no issues. Kind of dangerous when you lose power to brakes and steering too.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10241118Fuel Pump Connector Replacement The technician may experience a crank/no start after the fuel pump module was replaced. This bulletin involves replacing the fuel pump connector harness (pigtail) when replacing the fuel pump module.
- 10228120Manual Transmission Shifter Noise This bulletin involves greasing or replacing the manual transmission rear shifter bushing. Customers may experience a clunk, squeak, or similar noise heard from center console area while shifting.
- 10227983If a Mopar oil filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils.
- 10223599Part Description: Valve Body Assembly Issue Description: Valve body design was changed between 2010MY and 2011MY applications. To prevent mix matching valve bodies and solenoid packs the connectors are color coded.~ Valve bodies with a white connector can be used on 2010, 2009, 2008..., model years. Valve bodies with a gray connector can only be used on 2011, 2012, 2013..., model years.~ Solenoid packs with a white connector are used with 2010, 2009, 2008..., model years. Solenoid packs with a gray connector are used with 2011, 2012, 2013..., model years.
- 10221097Transmission Kit with Torque Converter 1. All Promaster (VF) 3.6L/62TE equipped vehicles. If the transmission bracket to the transmission case fasteners are removed during servicing, the fasteners (Part Number 06511385A$) are one-time usage. Vehicles built prior to 10/23/2015 requires Service Kit PN 68461214AA; includes Transmission Isolator PN 68264483AA, and Adaptation Bracket 68264479AA and Fastener Service Kit PN 68329056AA Vehicles built after on or after 10/23/2015 will require only the Fastener Service Kit PN 68329056AA. 2. All 3.6L/62TE equipped vehicles. If the vehicle you are repairing has a crack in the flex plate or failed pump bushing inspect and confirm that both (2) dowel pins are present in the engine block, which align the transmission center line to the crank shaft centerline and visually inspect the dowel alignment holes in the transmission case. If the holes are damaged or elongated the transmission should be replaced to prevent further damage to the transmission/flexplate or pump bushing due to the inability to properly align the engine to the transmission during the repair. 3. All 62TE equipped vehicles. If pump bushing is scored or damaged and the dowel pin alignment holes are ok, replace the pump assembly as opposed to complete transmission. 4. All 62TE equipped vehicles. If vehicle is jerking/slipping with MIL code(s) P0740 or P2764, check TCC Solenoid operation. If TCC Solenoid is ok, the codes are indicative of a torque converter failure. Replace the torque converter.
- 10220843NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission
- 10220687Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10220101Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10220099Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10220098Authentic Mopar Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar Glass.
- 10220097Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10216395Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10215988Flash: SRT Subwoofer Thump Noise After Vehicle Is Turned Off This bulletin involves re-flashing the Amplifier with updated software. The customer may experience after the vehicle is turned off a slow thumping noise coming from the subwoofer. This may happen only a few times or last until the next key cycle. This is caused by the amplifier waking up and then going back to sleep.
- 10215982Flash: Performance Derate Above 55 MPH Immediately After Start-Up When Accelerating At Wide Open Throttle This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience any of the following conditions: Performance derate above 55 MPH when accelerating at wide open throttle immediately following engine start-up.
- 10215879Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10212290Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10212248Oil Filter If a Mopar Oil Filter is not available, use a filter that meets or exceeds USCAR36 specification and is compatible with semi and full synthetic oils. Recommended Brands: Wix, Purolator, and NapaGold
- 10190590NAG1 Transmission Before installing the transmission with the engine, check for dowel pins (2) for alignment. If the pins are missing request to add the dowel pin first and then install the transmission
- 10188683Flash: SRT Subwoofer Thump Noise After Vehicle Is Turned Off This bulletin involves re-flashing the Amplifier with updated software. The customer may experience after the vehicle is turned off a slow thumping noise coming from the subwoofer. This may happen only a few times or last until the next key cycle. This is caused by the amplifier waking up and then going back to sleep.
- 10188677Flash: Performance Derate Above 55 MPH Immediately After Start-Up When Accelerating At Wide Open Throttle This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience any of the following conditions: Performance derate above 55 MPH when accelerating at wide open throttle immediately following engine start-up.
- 10187058Customer complaints may include abnormal engine noise, rough idle, lack of power, misfire. Upon investigation, it may be found that there is excessive camshaft lobe wear/lifter wear (roller failure) on one or more cam lobes and that camshaft/lifter replacement is necessary.
- 10181486Manual Transmission Shifter Noise This bulletin involves greasing or replacing the manual transmission rear shifter bushing. Customers may experience a clunk, squeak, or similar noise heard from center console area while shifting.
- 10175743Disinfectant Solution Recommended for COVID-19
- 10175735Charging System, Battery Diagnostic Tools and Warranty This information only bulletin discusses using the correct test equipment for testing batteries and charging systems, and also warranty reimbursement when battery replacements are necessary.
- 10175733Possible Driveability Issues due to the Winter-Blend Fuel into the Warmer Season
- 10169249Use of Aftermarket Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of aftermarket parts.
- 10169247Use of Salvage/Recycled Parts This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the use of recycled or salvage parts.
- 10169246Authentic Mopar Glass Replacement This bulletin involves discussing FCA US LLC position with regard to collision repair industry awareness regarding the recommended usage of Authentic Mopar Glass.
- 10169245Repair Parts Used For Structural Repairs This bulletin involves discussing FCA US LLC position with regard to structural repair parts usage.
- 10166537RADIO [RES] - New and/or Service Exchange For RES radio concerns. Use the wiTECH 2.0 and inspect the radio part number and serial number under the Radio/ECU Details tab. Please verify that the radio part number and/or serial number is not "FFFF". If either field shows "FFFF", please contact Mike Wielgat at 248-576-6696 or Rohan Negandhi at 248-421-9608 If no response in 15 minutes, proceed with repair.
- 10148692Flash: PCM Software Enhancements This bulletin involves selectively erasing and reprogramming the Powertrain Control Module (PCM) with new software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) illumination. Upon further investigation the Technician may find Diagnostic Trouble Code (DTC) U0401-00 - Implausible Data Received From ECM/PCM. This software update also has improvements for fuel pump relay cycling during remote starts.
- 10141286Manual Transmission Shifter Noise This bulletin involves greasing or replacing the manual transmission rear shifter bushing. Customers may experience a clunk, squeak, or similar noise heard from center console area while shifting.
- 10140065Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10139985Restraints Information Sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
- 10139978Restraints Remove I-Sheet from packaging. Correct information sheet (I-Sheet) has been added to Star Parts. Print I-Sheet for technician use.
- 10138987Gasoline Engine Diagnostic Inspection Procedure This bulletin provides a procedure to determine repair versus replacement of a gasoline long block engine assembly. This procedure is to be used prior to conducting any engine related repairs or removal of engine components.
- 10136861Flash: SRT Subwoofer Thump Noise After Vehicle Is Turned Off This bulletin involves re-flashing the Amplifier with updated software. The customer may experience after the vehicle is turned off a slow thumping noise coming from the subwoofer. This may happen only a few times or last until the next key cycle. This is caused by the amplifier waking up and then going back to sleep.
Every Dodge Challenger model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.