2015 Dodge Challenger
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Dodge › Challenger › 2015
These records cover every 2015 Dodge Challenger. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2015 Dodge Challenger. Newest first.
Chrysler (FCA US LLC) is recalling certain Mopar Stage 1 Kit Performance Packages Powertrain Control Modules (PCM) Part Numbers P5160023, P5160025, and Demon Crate PCM Part Number 68412287AA. The PCMs are being recalled to address a defect that could prevent the cruise control system from disengaging. If, when using cruise control, there is a short…
Risk and remedy
Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will either perform a software update or replace the PCM, free of charge. The recall began July 26 , 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U82, and U83.
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb)…
Risk and remedy
Risk
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Remedy
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Chrysler (FCA US LLC) is recalling certain model year 2013-2015 Ram 1500, 2500, 3500, 4500, and 5500, 2015 Chrysler 200, Chrysler 300, Dodge Charger, and Dodge Challenger, 2014-2015 Jeep Grand Cherokee, Cherokee, and Dodge Durango, and 2013-2015 Dodge Viper vehicles. The affected vehicles are equipped with radios that have software vulnerabilities that can…
Risk and remedy
Risk
Exploitation of the software vulnerability may result in unauthorized remote modification and control of certain vehicle systems, increasing the risk of a crash.
Remedy
Chrysler will notify and mail affected owners a USB drive that includes a software update that eliminates the vulnerability, free of charge. Optionally, owners may download the update to their own USB drive from http://www.driveuconnect.com/software-update/ or take their vehicle to a Chrysler dealer for immediate installation. In an effort to mitigate the effects of this security vulnerability, Chrysler has had the wireless service provider close the open cellular connection to the vehicle that provided unauthorized access to the vehicle network. This measure may not have been implemented on all vehicles and does not address access by other means that will be remedied by the software update. The recall began on August 25, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R40.
Chrysler (FCA US LLC) is recalling certain model year 2015 Dodge Challenger vehicles manufactured March 28, 2015, to April 1, 2015. In the affected vehicles, the driver's side air bag inflated curtain (SABIC) may have a loose or missing rear mounting bolt.
Risk and remedy
Risk
A loose or missing SABIC rear mounting bolt may alter the air bag inflated curtain's deployment, increasing the risk of occupant injury in the event of a side impact or roll-over crash.
Remedy
Chrysler has notified owners, and dealers will inspect and repair the vehicles, as needed, free of charge. The recall began on May 28, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R22.
Chrysler (FCA US LLC) is recalling certain model year 2015 Dodge Challenger SRT and Dodge Charger SRT vehicles manufactured September 18, 2014, to February 5, 2015, and equipped with a 6.2L supercharged engine. O-ring seal and fuel rail crossover hose damage may result in the fuel rail hose connection leaking fuel.
Risk and remedy
Risk
A fuel leak in the presence of an ignition source such as hot engine or exhaust components increases the risk of a vehicle fire.
Remedy
Chrysler will notify owners and dealers will replace the engine fuel rail injector crossover hose, free of charge. The recall began April 23, 2015. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is R07.
Chrysler Group LLC (Chrysler) is recalling certain model year 2015 Dodge Challenger vehicles manufactured June 30, 2014, to October 8, 2014. In the affected vehicles, the instrument cluster may become inoperative. This could cause the gauges to oscillate at zero and the Vehicle Theft Alarm could remain illuminated. Thus, the affected vehicles fail to…
Risk and remedy
Risk
If the instrument cluster becomes inoperative, it can increase the risk of a vehicle crash.
Remedy
Chrysler will notify owners, and dealers will install a software enhancement, free of charge. The recall began on December 15, 2014. Owners can contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is P74.
Owner complaints
127 complaints16 involved a crash3 involved a fire13 injuries
What owners report most
Latest complaints
- Fuel system, gasoline
The contact owns a 2015 Dodge Challenger. The contact stated that while driving 10 MPH, the vehicle stalled and the engine seized. The contact became aware of a strong fuel odor coming from underneath the hood of the vehicle. The vehicle was towed to the dealer and was diagnosed with a fractured…
The contact owns a 2015 Dodge Challenger. The contact stated that while driving 10 MPH, the vehicle stalled and the engine seized. The contact became aware of a strong fuel odor coming from underneath the hood of the vehicle. The vehicle was towed to the dealer and was diagnosed with a fractured intake fuel supply line. The contact was informed that the intake fuel supply line needed to be replaced. The contact referenced NHTSA Campaign Number: 15V114000 (Fuel System, Gasoline); however, the VIN was not included in the recall. The manufacturer was contacted, and a case was filed. The contact was advised to contact the NHTSA Hotline to report the failure. The failure mileage was approximately 45,000.
- Engine · Power train
The vehicle's engine has suffered a catastrophic internal failure at approximately 56,000 miles. The engine is the 6.4-liter HEMI V8. The issue began with a loud ticking noise from the engine. I brought the vehicle to Stoneridge Chrysler Jeep Dodge of Pleasanton for diagnosis. At that visit, the…
The vehicle's engine has suffered a catastrophic internal failure at approximately 56,000 miles. The engine is the 6.4-liter HEMI V8. The issue began with a loud ticking noise from the engine. I brought the vehicle to Stoneridge Chrysler Jeep Dodge of Pleasanton for diagnosis. At that visit, the dealership lubricated an unspecified component and instructed me to continue driving. The ticking noise temporarily subsided. Shortly after, the check engine light illuminated. I returned the vehicle to the same dealership, where the technician retrieved diagnostic trouble code P0303 (cylinder 3 misfire). Upon further inspection, the technician found scoring on the cylinder 3 wall, a persistent loud ticking noise from the engine, and metal contamination in the engine oil sample. The dealership diagnosed the failure as requiring a complete engine long block replacement at a quoted cost exceeding $23,000. The powertrain warranty has expired based on the 3-year time limit; however, the vehicle has fewer than 56,000 miles, which is well below the warranty's mileage threshold and exceptionally low for a vehicle of this age. The vehicle has been properly maintained throughout ownership with regular oil changes and scheduled service intervals. No aftermarket modifications have been made; the engine and all related components remain factory stock. I contacted Stellantis customer care to request assistance. They stated that because the vehicle is no longer under warranty, there is nothing they can do, and that the dealership should have submitted a goodwill assistance request on my behalf. The dealership said they would look into it. A complete engine failure at this mileage on an engine marketed as a high-performance powerplant suggests a manufacturing or material defect rather than normal wear and tear.
- Power train
42,000 miles drive shaft failure. Dealer stated drive shaft is ready to fall off. Completely stock vehicle, 1 owner.
- Air bags
On [XXX], I was involved in a serious motor vehicle collision in Arkansas while driving my Dodge Challenger. The crash was severe enough that the vehicle was declared a total loss. Despite the severity of the collision and significant front-end damage, none of the airbags deployed at any point…
On [XXX], I was involved in a serious motor vehicle collision in Arkansas while driving my Dodge Challenger. The crash was severe enough that the vehicle was declared a total loss. Despite the severity of the collision and significant front-end damage, none of the airbags deployed at any point during the crash. As a result of the collision and the failure of the airbag system to deploy, I sustained physical injuries and required approximately nine months of medical treatment and physical therapy. Based on the severity of the impact and the level of damage to the vehicle, I believe the airbags should have deployed and that their failure may indicate a defect in the airbag system or crash detection sensors. I am submitting this complaint so the incident can be investigated as a potential safety defect. I am concerned that this issue could pose a serious safety risk to other drivers if the airbag system fails to deploy in similar collisions.
- Unknown or other
Drive shaft broke and my car is not on recall list . It has under 60000 miles. Manual
- Electrical system › Instrument panel › Speedometer/odometer
Odometer Fraud. The contact purchased a 2015 Dodge Challenger. The contact then discovered that there was a mileage discrepancy. The vehicle was a dealer sale. At the time of purchase, the vehicle mileage was 138,160, and at the time of registration, it was discovered that the mileage was 222,348.
- Back over prevention › Rearview system braking · Back over prevention › Warnings · Visibility/wiper
Back Up Camera is glitching and not detecting items behind me. I noticed that this item was a recall at one time but when I put my VIN it does not indicate a recall.
- Electrical system · Engine · Fuel/propulsion system
My SHIFTER is messing up again recall U4 i believe and my its a recall on my vehicle ive had this vehicle for 2 years they stated the previous owner already had repaired but im imforming them i am still having the issue my car will literally stop going in the middle of the highway. Ive almost been…
My SHIFTER is messing up again recall U4 i believe and my its a recall on my vehicle ive had this vehicle for 2 years they stated the previous owner already had repaired but im imforming them i am still having the issue my car will literally stop going in the middle of the highway. Ive almost been close to getting in a accident and all everyone can say is it has already been repaired but i want them to understand that it may was repaired but it wasnt done correctly because something is wrong with my shifter/trasmission and electrical system. Which are both two valid recalls that i have. My shifter just blinks out of nowhere and just will stop at any moment. If the person behind me wasnt paying attention i couldve died or been harm seriously due to this keep happening while i am driving on the highway.
- Seats
I hadn’t on my car for very long when I stepped on the brakes and my passenger seat flew clear up to the dash. When I stopped and looked at it, they were little metal teeth all over the place underneath the seat. It won’t go all the way up and lock it will only go all the way back and semi lock. If…
I hadn’t on my car for very long when I stepped on the brakes and my passenger seat flew clear up to the dash. When I stopped and looked at it, they were little metal teeth all over the place underneath the seat. It won’t go all the way up and lock it will only go all the way back and semi lock. If there’s someone sitting in the passenger seat when I press on the brakes, it moves up a few inches and then back it will not lock completely
- Electrical system · Engine · Power train
One day after driving home from work there was a message that says low battery voltage on the instrument panel, then it went away. No other warning lights or problems. Ten more miles down the road the message says battery saver mode, reduced functions and then the car started to smoke, I am freaked…
One day after driving home from work there was a message that says low battery voltage on the instrument panel, then it went away. No other warning lights or problems. Ten more miles down the road the message says battery saver mode, reduced functions and then the car started to smoke, I am freaked out at this point praying to make it home safely. I arrive home and pull into driveway and then turn engine off and let it cool. Lift the hood and coolant has sprayed and spewed all over the engine compartment and is significantly reduced. Now parked, engine off the shift lights are still on and navigation panel and radio won't turn off. I had to unplug the battery completely and manually lock the car. The next day I replace the battery, check coolant, and allow car to warm up. No warning lights or messages. Then I start to drive and less than ten min, battery saver mode again, reduced function and power then engine smoking again, coolant spraying under hood and I have no idea what's wrong. Could it be the alternator, everything is still factory parts. Never happened when I changed the battery in 2022. This is scary.
- Seat belts › Front › Retractor
The contact owns a 2015 Dodge Challenger. The contact stated that while the vehicle was parked, while attempting to fasten the passenger’s side seat belt, the seat belt failed to retract. The vehicle was taken to a dealer where it was diagnosed and determined that the retractor mechanism had failed…
The contact owns a 2015 Dodge Challenger. The contact stated that while the vehicle was parked, while attempting to fasten the passenger’s side seat belt, the seat belt failed to retract. The vehicle was taken to a dealer where it was diagnosed and determined that the retractor mechanism had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 60,000.
- Seats
Passenger seat sliding mechanism not locking / latching properly. When coming to a stop the passenger seat will slide forward, sometimes an inch or two but sometimes further. This is a very well know issue I have discovered across multiple internet message boards and is due to inadequate slide bearings, and has been ongoing for years.
- Seat belts
the seat belts in the rear are guided through a metal D ring that has a plastic housing. This housing cracks and prevents the seat belts from retracting. This issue relays to most dodge, jeep chrysler products that all utilize the same part for front and rear seat belts. The issue has been acknowledged for front seat belts but not rear.
- Engine · Power train
The contact owns a 2015 Dodge Challenger. The contact stated while driving at an undisclosed speed, the contact heard an abnormal ticking sound coming from the engine compartment. The check engine warning light was illuminated. The vehicle was taken to the dealer, who was unable to determine the…
The contact owns a 2015 Dodge Challenger. The contact stated while driving at an undisclosed speed, the contact heard an abnormal ticking sound coming from the engine compartment. The check engine warning light was illuminated. The vehicle was taken to the dealer, who was unable to determine the cause of the failure. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 120,000.
- Forward collision avoidance › Adaptive cruise control · Forward collision avoidance › Warnings
adaptive cruise and forward collision warning failed regularly for 10 months. dealers worked to find issue after having car in shop for collectively about 3 months. Dealer replaced parts, and finally determined it was a 4G adapter sold by Uconnect- a part of Dodge parent corp. Mopar tech's were…
adaptive cruise and forward collision warning failed regularly for 10 months. dealers worked to find issue after having car in shop for collectively about 3 months. Dealer replaced parts, and finally determined it was a 4G adapter sold by Uconnect- a part of Dodge parent corp. Mopar tech's were aware of it, yet to my knowledge they still sell the 4G service. Use of the adapter with remote start disables FCW and ACC. I have pictures and documentation. They should stop selling this or fix software.
- Power train › Driveline › Driveshaft
The contact owns a 2015 Dodge Challenger. The contact stated while driving at an undisclosed speed, the vehicle was bouncing. The contact related the failure to a faulty carrier bearing in the driveshaft; however, the vehicle was not diagnosed or repaired by an independent mechanic or dealer. The…
The contact owns a 2015 Dodge Challenger. The contact stated while driving at an undisclosed speed, the vehicle was bouncing. The contact related the failure to a faulty carrier bearing in the driveshaft; however, the vehicle was not diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure and advised the contact to file a complaint with the NHTSA Hotline. The failure mileage was approximately 110,000.
- Fuel/propulsion system
Fuel tank fill side housing cracked.
- Power train › Driveline › Driveshaft
2015 Dodge Challenger- Consumer is writing in about the drive shaft on the vehicle. After visiting local repair man, consumer was told the vehicle is unsafe to drive. Consumer called Dodge and received "same old answer, we have no parts".
- Electrical system · Unknown or other
My back up camera works when it wants to sometimes and then other times it’s all blurry and can’t see also I get a light on for my brake system that goes on and off
- Electrical system · Service brakes · Unknown or other
The back up camera cuts on and off and doesn’t work most of the time and then my abs and traction control light comes on and off
- Electrical system
"Turn signal indicator lamp out" shows frequently on the dash display. It will remain on for 3-10 seconds and go off. Upon inspection, ALL EXTERIOR LAMPS function perfectly fine. Even when turn indicator on the dash blinks rapidly, the exterior lamps blink normally. It also dings when the indicator…
"Turn signal indicator lamp out" shows frequently on the dash display. It will remain on for 3-10 seconds and go off. Upon inspection, ALL EXTERIOR LAMPS function perfectly fine. Even when turn indicator on the dash blinks rapidly, the exterior lamps blink normally. It also dings when the indicator comes on. This just started about six weeks ago. This issue tells the driver that a lamp is out, when in reality it is not. It is very frustrating, as it may occur as often as every five minutes. I have talked to three independent repair shops, as well as three Dodge dealerships. I received basically the same response from all three dealerships, "We have no idea what may be causing this, but leave it with us for a day, and we will investigate. At $182 per labor hour. And we may not find the problem." I would have happily have paid for an hour or so of tracing, but a day?
- Unknown or other
Car was making a noise in motion only. I had the car inspected and noted on inspection the drive shaft was deteriorating. The car was inspected by Car-X and Sam Leman dealership. The mechanics advised the car was not safe to drive. The drive shaft was replaced by Sam Leman Dodge of Peoria.
- Power train
The contact owns a 2015 Dodge Challenger. The contact stated while driving the vehicle at various speeds, there was a loud noise coming from the engine compartment. The contact stated that there was no warning light illuminated. The vehicle was towed to a local mechanic where it was diagnosed with…
The contact owns a 2015 Dodge Challenger. The contact stated while driving the vehicle at various speeds, there was a loud noise coming from the engine compartment. The contact stated that there was no warning light illuminated. The vehicle was towed to a local mechanic where it was diagnosed with needing the driveshaft replaced. The vehicle was repaired. The manufacturer was informed of the failure and informed the contact that the vehicle was not included in a recall. The failure mileage was approximately 49,700.
- Forward collision avoidance › Adaptive cruise control · Forward collision avoidance › Warnings · Service brakes
2015 challenger, wheel speed sensor failures starting at year two. Have replaced wheel speed sensors on 5 separate occasions. It has affected all wheel speed sensors and fron passenger replaced twice. All replacement parts are from dealer and are geniuine mopar replacements. Seems to be a very common issue, the parts are typically on backorder and it can be caused simply by going through a car wash.
- Electrical system · Unknown or other
I purchased my vehicle new as a 2015. The HVAC blower motor has gone out so quickly and is rattling. It has been about two days when it started out of nowhere and as of today, the blower is not blowing anything out. It should last for 10-20+ years. My wife had the same issue with her BMW and it…
I purchased my vehicle new as a 2015. The HVAC blower motor has gone out so quickly and is rattling. It has been about two days when it started out of nowhere and as of today, the blower is not blowing anything out. It should last for 10-20+ years. My wife had the same issue with her BMW and it burned out and black smoke came out the vents. The wires were scorched. This is a safety issue due to fires. I have done research and vehicles have caught fire because of this problem in vehicles. Please advise and thank you. [XXX] INFORMATION Redacted PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6).”
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Software security vulnerability
On July 23, 2015, Fiat Chrysler Automobiles (FCA) launched Safety Recall 15V-461 to remedy security vulnerabilities in approximately 1.4 million model year (MY) 2013 through 2015 vehicles equipped with Uconnect head units (HU) 8.4A (RA3 radio) and 8.4AN (RA4 radio) manufactured by Harman International.On July 24…
On July 23, 2015, Fiat Chrysler Automobiles (FCA) launched Safety Recall 15V-461 to remedy security vulnerabilities in approximately 1.4 million model year (MY) 2013 through 2015 vehicles equipped with Uconnect head units (HU) 8.4A (RA3 radio) and 8.4AN (RA4 radio) manufactured by Harman International.On July 24, 2015, the Office of Defects Investigation (ODI) opened Recall Query, RQ 15-004, to investigate HU security vulnerabilities and remedy effectiveness in the recalled population and to determine whether similar units have been supplied for use in other FCA vehicles.In an August 11, 2015 letter, FCA submitted a second Part 573 safety recall report expanding the scope of the Uconnect RA4 model radio to include additional 7,810 MY 2015 Jeep Renegade vehicles manufactured from September 18, 2014 through June 25, 2015 (Recall 15V-508).Scope analysis indicated that Uconnect radios installed in FCA vehicles not included in recalls 15V-461 or 15V-508 (subject recalls) are not equipped with built-in cellular access or short range wireless communication features and, thus, do not contain the security vulnerabilities addressed by the subject recalls. SUBJECT VEHICLES: MY2014 through 2015 Dodge Durango, Jeep Grand Cherokee and Jeep Cherokee sport utility vehicles; MY2013 through 2015 Ram 1500, 2500, 3500 and 4500/5500 pickup trucks; MY2013 through 2015 Dodge Viper vehicles; and MY2015 Chrysler 200, 300, Jeep Renegade, Dodge Charger and Challenger vehicles.According to FCA, long and short range wireless vulnerabilities identified in the recalled vehicles could allow unauthorized third-party access to, and manipulation of, networked vehicle control systems.Successful exploitation of the vulnerabilities, coupled with reverse engineering of networked microprocessor control modules, could result in unauthorized manipulation of vehicle control systems. This unauthorized manipulation of vehicle controls and systems could expose the driver, vehicle occupants or other highway users to an increased risk of injury.FCA and its network provider, Sprint, conducted a nationwide campaign to block access to a radio communications port that was unintentionally left open.On July 27, 2015, short range wireless vulnerabilities were also blocked.Finally, third party security evaluation and regression testing identified vulnerabilities that were either remedied by Sprint or through updates to the FCA Uconnect software.ODI identified a total of 30 complaints or field reports on unique vehicles submitted by FCA (29) or received by NHTSA (1) alleging incidents of theft from a vehicle or anomalous performance that the owner alleged were caused by, or may have been caused by, remote hacking.Twenty-six (87%) of these reports were submitted after a magazine article was published on July 21, 2015, describing the remote hacking of an FCA vehicle by researchers who were able to affect the operation of various vehicle control systems, including the service brakes, steering, throttle and ignition.Most of the complaints involved vehicle systems that were not safety critical (e.g., complaints related to radio, navigation system, or air-conditioning control) and did not affect vehicle control.Three complaints reported engine stalls.One owner reported sudden unintended acceleration allegedly related to hacking.None of the complaints or field reports reviewed involved the steering and braking vehicle control effects demonstrated by the research hackers prior to the recall.There were no confirmed incidents of hacking in any of the records reviewed by ODI.The remedies completed by Sprint and FCA appear to have eliminated vulnerabilities that mi
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11005320"Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Verify current warranty policy to determine if digital imaging pre-authorization is required or pre-approval is required from the Regional Office; depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels."
- 10251783Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10248509Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10247995Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10247906ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10247905ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10244356LIFTER, Hydraulic Roller Deactivating Please do not replace MDS lifters because the disconnecting pin is not lined up, this is normal and not a defect.
- 10244348Connector kit Before ordering this connector repair kit 68018957A$, check it in the Mopar Connector Repair Kit Website to confirm part number and applicability. There is an error with the wiring diagrams in Service Library that is causing the incorrect repair kit part number to populate. Please use the Mopar Connector Repair Kit Website until this issue is resolved.
- 10243209FCA Caribbean Warranty Bulletin ID-23-20 "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC
- 10243208Warranty Bulletin D-16-03 - "Can / Am" Warranty Coverage - 594 / 595 / 596 WCC (Rev. B)
- 10242717Lubrication and Maintenance Fluids If MOPAR fluids and chemicals are not readily available, please review Service Library for specifications so a suitable alternative can be used
- 10241118Fuel Pump Connector Replacement The technician may experience a crank/no start after the fuel pump module was replaced. This bulletin involves replacing the fuel pump connector harness (pigtail) when replacing the fuel pump module.
- 10239957Water Quality When Mixed With Engine Coolant
- 10236933wiTECH Small Leak Verification Test (SLVT) - P0456-EVAP SYSTEM SMALL LEAK
- 10234468Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: **Verify current warranty policy to determine if digital imaging pre authorization is required or Pre Approval is required from Regional Office depending on market.** This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10234420Start Stop Charging Warning Lamp Illuminated On, Intelligent Battery Sensor (IBS) State of Charge (SOC) Inaccurate, Battery Charging Message, Presence of IBS related Diagnostic Trouble Codes (DTCs), or Battery Warning Lamp On
- 10234379ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY review and follow instructions from the latest STAR Online S1809000007 available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10234378ADAPTER, Engine Oil Filter (Pentastar V6) For all 2014MY replace the Oil Filter Adapter (OFA). For any other MY (with mileage above 30,000) review and follow instructions from STAR Online S1809000007 REV. C available on Dealer Connect. Also, consider the following: 1) Remove OFA 2) Replace only the oil inlet O-ring and gaskets (seals kit in SOL above). 3) Re-install the OFA. For 2023MY and beyond use black O-ring. For 2022MY and prior use red O-ring. Note: When replacing OFA, it may be necessary to transfer the Oil Temp/Pressure Sensor from the old OFA to the new OFA.
- 10231985RA2 And RJ2 Radio Software Enhanc
- 10230301Decreased Remote Start And RKE Range. Tire Pressure Sensors Values Are Not Displayed
- 10230183No Start, Cannot Complete Module Replace, Proxi Or Module Proxi Configuration
- 10230180Issue involves overheating, running hot, coolant leaks and related symptoms after a Mopar replacement engine has been installed in the vehicle.
- 10230029Customer Complaint May Include Engine Oil Leak Or Consumption
- 10229975Satin Finish Care And Protection
- 10229964Transmission Quick Learn Procedure
- 10229933RA3 RA4 Radio Update For Ignition Off Battery Draw
- 10229932RA3 RA4 Radio Update For Ignition Off Battery Draw
- 10229920RA3 RA4 Radio Enhancements This bulletin involves inspecting and, if required, updating the radio software. A small number of customers may experience one or more of the following: Low battery condition due to the radio remaining powered up after the ignition has been turned off (U.S Markets Only). The Radio may switch from SiriusXM to an AM station by itself. Uconnect registration always present, can not remove Uconnect account. Teleprompter does not appear when pressing the Voice Recognition (VR) button. VR operation cancels while in media mode. Radio may display previous cameras image before displaying the current image.
- 10229903Wind Noise At The Left And/Or Right Door This bulletin involves repositioning the outer door mounted window seal flag. The customer may describe a wind noise at the left and/or right door.
- 10229885Radio Loss Of Audio Signal Or Static Interference On FM Stations This bulletin involves verifying the static concern on FM radio station frequencies and if applicable, replacing the inner combination tail stop backup lamp. The customer may describe a loss of audio signal or static interference on FM radio stations.
- 10229810Aluminum Body Panel Corrosion Repair Aluminum corrosion or bubbling along the leading edge of hood, hinges or other exterior surface areas of the hinges, doors, fenders, swing gates or liftgates. NOTE: Digital imaging pre authorization is required for Smart Warranty Base dealers or Pre Approval is required from Regional Office depending on market. This bulletin involves inspecting and if necessary removing corrosion and refinishing the suspect aluminum panels on the vehicle, hood, door, fenders, hinges, swing gates or liftgate panels.
- 10229572Approved Use of Weld Through Primers This bulletin documents the FCA US LLC position regarding the use of weld through primer when using Squeeze Type Resistance Spot Welding (STRSW) and Gas Metal Arc Welding (GMAW) processes when welding steel body panels and structural components.
- 10229540Flash: Radio Frequency Hub Module (RFHM) Updates This bulletin involves reprogramming the RFHM with the latest software available. The customer may describe that they heard about these vehicles that can be unlawfully driven away by thieves when they are able to program new key fobs through the RFHM. Software enhancement include: Update to the RFHM software to prevent hackers from programming their own key fob to the vehicle. This is intended to deter an unwanted drive off of the vehicle without the customers knowledge. Performing this RFHM update will prevent additional key fob programming and this must be communicated to the customer before performing this RFHM update. If additional keys are required by the customer after this RFHM update is performed the replacement of the RFHM is required and must be at a previous SW level.
- 10229316Customer Satisfaction Notification W56 Reprogram Powertrain Control Module
- 10229315Emissions Recall V86 Catalytic Converter Efficiency
- 10229314Emissions Recall V86 Catalytic Converter Efficiency
- 10229255Transmission Oil Pan, Heater (TMU), Tube or O-ring Applies to vehicles equipped with 8 speed transmissions only; if you have a leak that appears to be at the pan the use of proper leak detection is recommended. The fluid in the 8 speeds can be detected with a black light and there are aftermarket spray on leak detection materials to help ensure that the leak is properly diagnosed and not from another location such as cooler lines, heater tubes, or case porosity. Please note that the transmission pan gasket is available for many of the 8 speed applications FCA offers. Please review the available quick connect and transfer tube parts, as replacement of the TMU may not be required. If a TOC line connection is found to be the source, the quick connect may need replacement. If the leak source is coming from the connection of the TMU to the transmission, the transfer tube may need replacement. When parts are returned to the QEC the retaining clips (snap ring) for the quick disconnect fittings are missing. (This leaves a question as to whether the clips were missing from the assembly plant, or the technician removed them in order to make line removal easier.) Please return the clips with the transmission heater and note if they were not there to begin with. For any questions regarding transmission heater, contact FCA Redacted Content. If no response in 15 minutes, proceed with repair.
- 10229209Flash: 6.2L Powertrain Diagnostic And System Enhancements This bulletin involves reprogramming the Powertrain Control Module (PCM) with the latest available software. A small number of customers may experience a Malfunction Indicator Lamp (MIL) Illumination. Upon further investigation, the technician may find one or more of the following Diagnostic Trouble Codes (DTCs) stored in the PCM memory. ? P0300 - Multiple Cylinder Misfire (manual transmission applications only). ? P1613 - Turbocharger/Supercharger Boost Pressure Sensor/Mass Air Flow Sensor Correlation. ? P2227 - Barometric Pressure Circuit Performance In addition, customers may also comment that, with the cluster set on metric units, they are unable to accurately increase or decrease the cruise control set speed using the resume or set buttons. Instead of changing vehicle speed by 1 KPH when pressing the buttons, the vehicle speed will increase approximately 1.6 KPH.
- 10229203Loss Of Power Steering Assist This bulletin involves inspecting the steering gear pinion cover retaining washer and if not present, replacing the steering gear. Pinion Shaft Cover Retaining Washer Missing. The customer may describe loss of power steering assist.
- 10229198Flash: Transmission Shift And Drivability Enhancements This bulletin involves reprogramming the Transmission Control Module (TCM) with the latest available software. A small number of customers may experience one or more of the following concerns. These concerns are broken up per engine and transmission combination. 6.2L engine (sales code ESD) equipped with an 8HP90 transmission (sales code DFE) ? Transmission will not upshift during Wide Open Throttle (WOT) acceleration. ? Harsh or inconsistent coasting downshifts. ? Transmission will not shift into 7th gear during high speed driving. ? Inconsistent or busy shifts during stop and go traffic. ? Inconsistent gear shift patterns when driving on grades. ? Malfunction Indicator Lamp (MIL) Illumination during ABS activated stops with Diagnostic Trouble Code (DTC) P1DCD TCM Monitoring Processor Performance, Multiple Clutches Locked Up. 6.4L engine (sales code ESG) and equipped with an 8HP70 transmission (sales code DFK) ? Harsh or inconsistent 1-2 upshift. ? Harsh of inconsistent coasting 4-3 downshift. ? Harsh or inconsistent gear engagement when shifting to drive or reverse. ? Instrument Panel Cluster (IPC) shows the incorrect gear when in manual mode. ? Harsh of inconsistent shifts during tip-in acceleration from closed throttle. ? Inconsistent gear shift patterns when driving on grades. ? Inconsistent release of Hill Start Assist during tip-in acceleration. ? Transmission upshifts on sweeping curves under track driving conditions.
Every Dodge Challenger model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.