2005 Honda Element
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Honda › Element › 2005
These records cover every 2005 Honda Element. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
10 recalls name the 2005 Honda Element. Newest first.
Honda (American Honda Motor Co.) is recalling certain 2003 Acura 3.2CL, 2002-2003 3.2TL, 2003-2006 MDX, 2001-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot and 2006 Ridgeline vehicles. These vehicles are equipped with driver frontal air bag…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are Q5A and Y58.
Honda (American Honda Motor Co.) is recalling certain 2003-2006 Acura MDX, 2005-2012 RL, 2003-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2007-2008 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The vehicles are equipped with passenger frontal air bag…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal airbag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are E5D and X5C.
Honda (American Honda Motor Co.) is recalling specific 2003 Acura 3.2CL, 2013-2016 ILX, 2013-2014 ILX Hybrid, 2003-2006 MDX, 2007-2016 RDX, 2002-2003 3.2TL, 2004-2006, and 2009-2014 TL, 2010-2013 ZDX and 2001-2007 and 2009 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2007 and 2010-2011 CR-V, 2003-2011 Element, 2007…
Risk and remedy
Risk
An explosion of an inflator within the driver frontal air bag module may result in sharp metal fragments striking the driver, front seat passenger or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver's air bag inflator with an alternate inflator, free of charge. The recall began April 10, 2019. Honda owners may contact customer service at 1-888-234-2138. Honda's number for this recall is O41. Acura owners may contact customer service at 1-888-234-2138. Acura's number for this recall is U40.
Honda (American Honda Motor Co.) is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2011 Honda Element vehicles, 2005-2012 Acura RL vehicles, 2006-2012 Honda Ridgeline vehicles, 2007-2008 Honda Fit vehicles and 2005-2008 Honda Pilot vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall bagan March 2017. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KD9 and KE0.
Honda (American Honda Motor Co.) is recalling certain model year 2003-2006 Acura MDX, 2005-2011 Acura RL, 2005-2006 Honda CR-V, 2003-2011 Element, 2007-2008 Fit, 2003-2008 Pilot, 2002-2004 Odyssey, and 2006-2011 Ridgeline vehicles originally sold, or that have ever been registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began June 27, 2016. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KA0, KA1, KA2, and KA3.
Honda (American Honda Motor Co.) is recalling certain model year 2001-2007 Accord, 2001-2005 Civic, 2001-2004 Honda Civic GX, 2003-2005 Honda Civic Hybrid, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot, 2006 Ridgeline, 2003 Acura 3.2CL, 2003-2006 Acura MDX, and 2002-2003 Acura 3.2TL vehicles. The affected vehicles are equipped with…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began on July 1, 2015. Owners may contact Honda customer service at 1-888-234-2138. Owners may contact Acura customer service at 1-800-382-2238, select option 4. Note: Vehicles that have had their driver frontal air bag replaced previously as part of a recall remedy prior to September 12, 2014 need to have their air bag replaced under this recall as well. Vehicles that, on or after September 12, 2014, received a remedy for a prior driver frontal air bag inflator recall already received an inflator of a different design, and therefore are not included in this recall and do not require additional servicing. Note: This recall fully supersedes recalls 08V-593, 09V-259, 10V-041, 11V-260, 14V-351 and 15V-153. Honda's numbers for this recall are JQ9, JR0, JR1, JR2, JR3, JR4, JR5, JR6, JR7, and JR8.
Honda IS recalling certain model year 2005-2010 accord, 2007-2010 CR-V, and 2005-2008 element passenger cars manufactured from july 1, 2004, through september 3, 2010. the outer race of the secondary shaft bearing may be broken during certain driving styles. a broken outer race may cause abnormal noise, the malfunction indicator light to turn on, and…
Risk and remedy
Risk
This could result in a short circuit causing the engine to stall. additionally, broken pieces of the outer race or ball bearing from the secondary shaft may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the park position. engine stall and unexpected vehicle movement increases the risk of a crash or personal injury to persons within the path of a rolling vehicle.
Remedy
Honda will notify owners and dealers will update the automatic transmission control module software free of charge. the safety recall began on august 27, 2011. owners may contact honda automobile customer service at 1-800-999-1009.
Dope, inc. IS recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on july 28, 2009. owners may contact dope, inc. At 1-626-272-1798.
Sabersport IS recalling 16,270 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Sabersport will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on may 11, 2009. owners may contact sabersport at 1-909-598-7589.
Certain honda accessory trailer harness kit, p/n 08l91-scv-102, manufactured between november 24 and december 18, 2004, sold for use on my 2005 honda element vehicles manufactured between december 20, 2004, and april 29, 2005. the wire harness of the trailer hitch kit has an incorrectly wired connector. as a result, the trailer brake lamps and turn signal…
Risk and remedy
Risk
Improper signaling or a loss of trailer warning lamp function without warning could cause a vehicle crash, possibly resulting in injuries.
Remedy
Honda will notify its customers and instruct them to bring their vehicle to a honda dealer. the dealer will correct the connector wiring free of charge. the recall began on may 17, 2005. owners may contact honda at 310-783-2000.
Owner complaints
159 complaints13 involved a crash5 involved a fire19 injuries
What owners report most
Latest complaints
- Air bags
On 8.31.26, while driving my 2005 Honda Element Mileage: Approximately 125,000), the front passenger-side airbag spontaneously deployed without warning.There was absolutely no vehicle collision, physical impact, pothole, undercarriage strike, or jarring event to trigger a deployment. Approximately…
On 8.31.26, while driving my 2005 Honda Element Mileage: Approximately 125,000), the front passenger-side airbag spontaneously deployed without warning.There was absolutely no vehicle collision, physical impact, pothole, undercarriage strike, or jarring event to trigger a deployment. Approximately 10 hours prior to the spontaneous deployment, the airbag warning light illuminated on the instrument cluster and remained solid, indicating an active system fault. The car then sat parked for about 8 hours, before driving again. The light remained on.The uncommanded deployment filled the cabin with a smell and gases while the vehicle was in motion between towns. A VIN lookup shows no currently outstanding recalls for this vehicle, indicating the failure occurred within a previously remedied issue. Remedied in 2016. The vehicle is currently grounded and parked at my residence due to safety hazards. I am requesting an investigation into this uncommanded deployment and potential SRS control module or short-circuit failure, as it poses an immediate, severe risk of driver-side deployment and physical injury. A report has been filed with honda and a case opened.
- Suspension
Left rear trailing arm mount has rusted and trailing arm is not intact.
- Tires › Markings · Tires › Sidewall · Tires › Tread/belt
"Reporting a Material Compound Failure on a set of 4 Falken Wildpeak AT Trails tires (size 215/70/16) sold as 'new' but manufactured in 2021 (DOT 3921). Despite 8/32" tread remaining (75% life), from there original 10/32'' tread the rubber is failing with severe dry rot/cracking through the…
"Reporting a Material Compound Failure on a set of 4 Falken Wildpeak AT Trails tires (size 215/70/16) sold as 'new' but manufactured in 2021 (DOT 3921). Despite 8/32" tread remaining (75% life), from there original 10/32'' tread the rubber is failing with severe dry rot/cracking through the sidewall and markings on all 4 tireson the outside,and inside of the tire walls. This is a safety hazard involving undisclosed 'New Old Stock' this is premature failure ,and was confirmed by Mavis Tire,and Brake center inspection that is also a Falken authorized dealer.
- Suspension
The contact owns a 2005 Honda Element. The contact stated that while at a complete stop, the vehicle began to tilt sideways while depressing the accelerator pedal. The vehicle became inoperable. There was no warning light illuminated. The contact pulled off to the shoulder of the roadway. Upon…
The contact owns a 2005 Honda Element. The contact stated that while at a complete stop, the vehicle began to tilt sideways while depressing the accelerator pedal. The vehicle became inoperable. There was no warning light illuminated. The contact pulled off to the shoulder of the roadway. Upon inspection of the vehicle, the contact discovered that the rear driver’s side control arm had separated from the frame of the vehicle, causing the rear wheel to tuck in underneath the wheel hub. Due to the failure, the vehicle was towed to an independent mechanic where it remained undiagnosed. The dealer was contacted and stated that based on the pictures, the entire suspension needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 124,000.
- Air bags
Air bag in drivers seat deployed when I shut rear door. Car was running at the time.
- Suspension
The contact owns a 2005 Honda Element. The contact stated while inspecting the vehicle, the contact noticed that the rear trailing arm mount was severely rusted. The vehicle was taken to an independent frame mechanic, where the contact was informed that the rear trailing arm mount could fracture.…
The contact owns a 2005 Honda Element. The contact stated while inspecting the vehicle, the contact noticed that the rear trailing arm mount was severely rusted. The vehicle was taken to an independent frame mechanic, where the contact was informed that the rear trailing arm mount could fracture. The vehicle was taken to the dealer, where the contact was informed that the VIN was not included in an unknown recall. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 190,000.
- Suspension
The left rear control arm pulled out of the subframe and floor panel and hit the pavement facing forward, the direction in which the car was moving. The left rear tire pulled out and away from the vehicle, and the car lurched downward. There were sparks. I was pulling away from a gas pump at a…
The left rear control arm pulled out of the subframe and floor panel and hit the pavement facing forward, the direction in which the car was moving. The left rear tire pulled out and away from the vehicle, and the car lurched downward. There were sparks. I was pulling away from a gas pump at a service station. I stopped the car immediately and had it towed to a mechanic. There was no warning. There were no unusual sounds or movements prior to the incident. Approximately 100 miles before the incident, a licensed mechanic did a safety inspection and test drove the vehicle prior to doing maintenance on other parts of the car. Two different mechanics inspected the vehicle and determined it was unsafe to repair it. The control arm broke off due to excessive rust and corrosion, which was not visible during the safety inspection, because the area was visually blocked by a strut.
- Structure › Body · Suspension
Rear unibody rust through allowing the drivers side rear trailing arm to become detached. Pulling up to stop sign very slowly luckily. At speed this failure would have assuredly led to a crash from loss of control. Calls have been placed to local Honda dealer as well as American Honda where I was informed there was no recall for this problem in the USA.
- Suspension
I was driving and all of a sudden vehicle became hard to control. I got it stopped and noticed drivers side rear tire was sideways. upon inspection I noticed trail arm was broke loose at frame. apparently it had rusted through at the frame.
- Suspension
I was driving and left rear trail arm connecting wheel to frame broke loose. upon inspection I noticed the frame was so rusted in that one spot causing trail arm to break loose which caused me to lose control of vehicle very dangerous!
- Suspension
The contact owns a 2005 Honda Element. The contact stated while driving 30 MPH and making a right turn, the rear driver’s side wheel assembly separated from the vehicle. The contact was able to park the vehicle in a nearby parking lot. The vehicle was towed to an independent mechanic who stated…
The contact owns a 2005 Honda Element. The contact stated while driving 30 MPH and making a right turn, the rear driver’s side wheel assembly separated from the vehicle. The contact was able to park the vehicle in a nearby parking lot. The vehicle was towed to an independent mechanic who stated that the rear driver’s side wheel assembly separated from the hub and needed to be replaced. The dealer was contact and stated that the vehicle was not under the recall for the failure. The vehicle was not repaired. The manufacturer was contacted, and case was filed but no assistance was provided. The failure mileage was 14,000.
- Structure › Body
Defect where rear controller arm connects to frame is rusted out. This would cause the rear tires to fall off. The rest of the car isn’t that bad. Canada there is a recall for this but not in the USA.
- Electrical system · Engine · Fuel/propulsion system
Vtec oil pressure switch low voltage threw a code so I replaced entire mechanism, I don't know the name buy removed wire snaps and three bolts and replaced with brand new, and reattached. Unplugged battery till all reserve was gone. Plugged back up [battery] drove, but still as I hit 3000 rpm and…
Vtec oil pressure switch low voltage threw a code so I replaced entire mechanism, I don't know the name buy removed wire snaps and three bolts and replaced with brand new, and reattached. Unplugged battery till all reserve was gone. Plugged back up [battery] drove, but still as I hit 3000 rpm and vtec turns on shoots check engine light and vehicle jukes. I have already changed oil, made sure proper level proper weight had flushed as to clean out any debris. Made sure all connections were tight, but nothing fixes problem.
- Steering · Structure › Body · Suspension
I have a 2005 Honda Element, undercarriage and suspension components have severe rust. I tried to get an inspection from Virginia and it failed immediately due to the rust. The mechanic lowered the vehicle as quickly as he could because of it falling off the lift. ultimately he told it is unsafe to…
I have a 2005 Honda Element, undercarriage and suspension components have severe rust. I tried to get an inspection from Virginia and it failed immediately due to the rust. The mechanic lowered the vehicle as quickly as he could because of it falling off the lift. ultimately he told it is unsafe to drive. After doing some research I found out that Honda Canada has done a recall on Honda elements from 2003-2010 due to this common issue and here is what they wrote. Issue: On certain vehicles, the rear frame could rust. In extreme cases, this could result in a rear trailing arm separating from the vehicle. This recall applies to vehicles originally sold or currently registered in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador). Safety Risk: A rear trailing arm that separates could cause a loss of control and increase the risk of a crash. Corrective Actions: Honda will notify owners by mail. Owners will be instructed to take their vehicle to a dealer for an inspection of the rear trailing arm front mount bolts. If the vehicle passes the inspection, the dealer will apply corrosion protection and install support braces. Honda will offer to repurchase vehicles that do not pass the inspection. In the event the repurchase is declined by an owner, a secondary inspection and body shop repair method may be possible.
- Suspension · Unknown or other
Having rust issue with my 2005 Honda Element causing steering and handling issues Unsafe to drive per my mechanic This model has been recalled in Canada to address this issue Is there anything investigating ongoing in the USA as this problem is affecting many elements in the USA as well
- Power train › Automatic transmission
The contact owns a 2005 Honda Element. The contact stated that while his vehicle was parked in a parking lot, the vehicle independently drifted backwards without warning. Due to the failure, the vehicle collided with another vehicle which resulted in the injury of the occupant inside the other…
The contact owns a 2005 Honda Element. The contact stated that while his vehicle was parked in a parking lot, the vehicle independently drifted backwards without warning. Due to the failure, the vehicle collided with another vehicle which resulted in the injury of the occupant inside the other vehicle. The other occupant claimed to have sought medical treatment for his injuries(injuries unknown). There was rear bumper damage to the other vehicle as a result of the failure. A police report was filed and neither vehicle was towed from the scene. The dealer was notified of the failure and stated that they were unaware of such a failure occurring with this model vehicle. The manufacturer had yet to be notified of the failure. The failure had yet to reoccur and the vehicle had yet to be repaired. The failure mileage was approximately 208,000.
- Air bags · Electrical system · Exterior lighting
My 2005 honda element constantly display airbag off, when it's inaccurate, dashboard light doesn't work. There's some kind of shortage because it blinks, come on and go off and stay off. It shows the same information, rather driving or stationary. are there recalls on this car? It's been one problem after another.
- Air bags · Seat belts · Suspension
The air bag stays on even after a the left air bag assembly replaced. there IS a loud knocking front end which IS worse when it IS going about 15-30 miles.
- Air bags · Electrical system · Exterior lighting
Airbag warning lights will come on for no reason saying passenger airbag IS off and it IS not off. This happens at least once a week. This happens at various times, cranking vehicle, driving vehicle, there IS really no specific situation . It's sporadic. headlights have always been dim. Sometimes…
Airbag warning lights will come on for no reason saying passenger airbag IS off and it IS not off. This happens at least once a week. This happens at various times, cranking vehicle, driving vehicle, there IS really no specific situation . It's sporadic. headlights have always been dim. Sometimes I can't even tell if they are on. the cargo lights, front middle and back work sometimes and most times they don't. Also brake lights seem to have a mind of there own and work when they want to but definitely not when I want them to. in fact I am pretty sure there IS an electrical shortage somewhere.
- Air bags
Was driving on a gravel road around 30 mph when I heard a loud bang and noticed that something hit my left arm. I looked to the side and saw that the side airbag on the driver side had deployed. I did not get hit nor did I hit anything.
- Air bags
In a parking lot moving slowly. I was the only one in the car. The air bag on the rear of the passanger seat deployed. Nothing was hit or was I hit by anything. The seat was moved forward as far as possible because I had something in the back.
- Structure › Body
The underbody frame IS rusted severely causing left rear wheel to be loose making it unfit to drive as IS. Due to the significant rust and corrosion discover when took to my mechanic to evaluate poor handling and looseness when driving told me unsafe to drive away
- Unknown or other
Purchased from private seller. advertised as 2005, with 55,000 miles, 4WD, one owner, no accidents. seller provided fabricated carfax report, altered title and the odometer was tampered with and the car IS FWD, has have 5 owners and has a reported accident. *tr
- Air bags
I do not have this vehicle any longer. It was totalled in 2015 and sold to a salvage company in janesville, wisconsin. I have tried many, many times to report this to various entities in variety of ways, but I keep getting notices. It has been 4 years, and I keep getting these letters/notices. I was told that there was nothing that I can do about it. Stop the mailings, I no longer own the vehicle.
- Air bags
Air bag replaced around aug. 1, 2016. I believe the air bag was not installed properly as it rattles inside the dashboard. Rattles while in motion.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10186009"Service Bulletin - There are several A/C leak detection tools available. -Refrigerant Gas Leak Detector -Ultrasonic Leak Detector -Leak Dye"
- 10172566Service Bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passenger's airbag inflator only.
- 10172561Service Bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement driver's airbag inflator only.
- 10141172Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passengers airbag inflator only.
- 10141169Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passengers airbag inflator only.
- 10139567Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects to the replacement driver's airbag inflator only.
- 10128880Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128879Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128878Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128578Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. At this time, affected VINs have not been determined.
- 10128577Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. At this time, affected VINs have not been determined.
- 10128564Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that over time may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material possibly causing injury or fatality to vehicle occupants.
- 10128559Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of July 23, 2014, affected VINs have been identified, and service bulletins 14-040, Safety Recall: Accord, Civic, and Others ? Front Passenger?s Airbag Inflator Can Be Over-Pressurized, 14-045, Recall: Front Driver?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity Recall, and 14-046, Recall: Front Passenger?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity have been posted to ISIS. However, due to the large number of affected units, American Honda is still in the process of populating the VIN status inquiry function on iN, which is expected to take several days. When this process is complete, American Honda will notify all dealers again via iN message. Until that time, the existing acknowledgement procedure must be used for all potentially affected vehicles.
- 10128531Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of August 4, 2014, affected VINs have been identified, and VIN status inquiry has been updated.
- 10124983Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10118840Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants. Affected Honda vehicles were originally sold and/or registered in the following geographic locations: Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, and the U.S. Virgin Islands.
- 10118182Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10118031Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants. Affected Honda vehicles were originally sold and/or registered in the following geographic locations: Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, and the U.S. Virgin Islands.
- 10115209Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108579Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108532Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108461Customer letter - please be aware, we have a national safety improvement campaign and recall under way to repair airbag inflators, at no cost to you, in certain honda and acura vehicles (listed below). To see if your vehicle needs immediate attention, please check its recall status.
- 10108445Customer letter - please be aware, we have a national safety improvement campaign and recall under way to repair airbag inflators, at no cost to you, in certain honda and acura vehicles (listed below). To see if your vehicle needs immediate attention, please check its recall status.
- 10108257"Service bulletin - certain honda vehicles operated in areas known for high absolute humidity and high heat may contain a drivers airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10108232"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even if the vehicle was repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10108186"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even if the vehicle was repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10100701"Service bulletin - in certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10099910Poster of listed honda vehicles affected by an airbag inflator recall - spanish.
- 10099909Poster of listed honda vehicles affected by an airbag inflator recall - english.
- 10099821"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even though the vehicle may have been repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10098946"Service bulletin - the mil comes on with one of these dtcs: p2646/p2651 (rocker arm oil pressure switch circuit low voltage). P2647/p2652 (rocker arm oil pressure switch circuit high voltage). Note: the symptom may be intermittent and you may not be able to duplicate it after clearing the dtc. The rocker arm oil pressure switch may fail intermittently."
- 10086381Us virgin islands newspaper advertisements to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086308Text messages sent to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086306Posters sent to hawaiian independent repair facilities, automotive part stores, car washes, and gas stations to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086302Advertisement in hawaiian newspapers to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086291Flyer circulated to the residents of hawaii to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086288Letter sent in conjunction with the florida highway safety and motor vehicles department to remind florida owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10052884Honda: dtc p2646/p2651 or p2647/2652 may be set. The rocker arm oil pressure switch may need to be replaced. Also included model civic si model year 2002-2005.
- 10043248Honda: on some model vehicles, there IS an alternator/starter tester (ast) module capable of testing alternators, installed on GR8 diagnostic battery station.
- 10039537Honda: the vehicle moves faster than expected with the transmission in gear, foot off the brake, and foot off the throttle. Software IS causing extra engine torque after a cold start.
Every Honda Element model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.