2008 Honda Element
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Honda › Element › 2008
These records cover every 2008 Honda Element. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
13 recalls name the 2008 Honda Element. Newest first.
Dorman Products, Inc. (Dorman) is recalling certain Accelerator Pedal Assemblies part numbers 699-114 and 825-5029-1, sold as replacement parts for 2003-2006 Acura MDX, 2004-2008 Acura TL and TSX, 2003-2007 Honda Accord, 2005-2006 Honda CR-V, 2007-2011 Honda Element, 2005-2008 Honda Pilot and 2006-2014 Honda Ridgeline vehicles. The rotating portion of the…
Risk and remedy
Risk
If the accelerator pedal binds, the engine may not quickly return to idle after the pedal is no longer pressed, increasing the risk of a crash.
Remedy
Dorman will notify owners, and qualified service facilities will replace the affected accelerator pedal assemblies, free of charge. The recall began December 9, 2019. Owners may contact Dorman customer service at 1-800-523-2492, using option 5. Dorman's number for this recall is AS1019XXXX.
Honda (American Honda Motor Co.) is recalling certain 2003 Acura 3.2CL, 2002-2003 3.2TL, 2003-2006 MDX, 2001-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot and 2006 Ridgeline vehicles. These vehicles are equipped with driver frontal air bag…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are Q5A and Y58.
Honda (American Honda Motor Co.) is recalling certain 2003-2006 Acura MDX, 2005-2012 RL, 2003-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2007-2008 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The vehicles are equipped with passenger frontal air bag…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal airbag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are E5D and X5C.
Honda (American Honda Motor Co.) is recalling specific 2003 Acura 3.2CL, 2013-2016 ILX, 2013-2014 ILX Hybrid, 2003-2006 MDX, 2007-2016 RDX, 2002-2003 3.2TL, 2004-2006, and 2009-2014 TL, 2010-2013 ZDX and 2001-2007 and 2009 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2007 and 2010-2011 CR-V, 2003-2011 Element, 2007…
Risk and remedy
Risk
An explosion of an inflator within the driver frontal air bag module may result in sharp metal fragments striking the driver, front seat passenger or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver's air bag inflator with an alternate inflator, free of charge. The recall began April 10, 2019. Honda owners may contact customer service at 1-888-234-2138. Honda's number for this recall is O41. Acura owners may contact customer service at 1-888-234-2138. Acura's number for this recall is U40.
Honda (American Honda Motor Co.) is recalling certain 2003-2012 Honda Accord and Pilot, 2010 Accord Crosstour, 2001-2011 Civic, 2002-2011 CR-V, 2003-2004, 2006-2008 and 2011 Element, 2007 and 2009-2013 Fit, 2010-2012 Insight, 2002-2004 Odyssey, and 2012 Ridgeline vehicles. The front passenger air bag may have been installed incorrectly during replacement.
Risk and remedy
Risk
An incorrectly installed air bag may deploy improperly in the event of a crash, increasing the risk of injury.
Remedy
Honda will notify owners, and dealers will inspect and, if necessary, replace the passenger frontal air bag module assembly, free of charge. The recall began June 22, 2018. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are K1P, and M1O.
Honda (American Honda Motor Co.) is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2011 Honda Element vehicles, 2005-2012 Acura RL vehicles, 2006-2012 Honda Ridgeline vehicles, 2007-2008 Honda Fit vehicles and 2005-2008 Honda Pilot vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall bagan March 2017. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KD9 and KE0.
Honda (American Honda Motor Co.) is recalling certain model year 2003-2006 Acura MDX, 2005-2011 Acura RL, 2005-2006 Honda CR-V, 2003-2011 Element, 2007-2008 Fit, 2003-2008 Pilot, 2002-2004 Odyssey, and 2006-2011 Ridgeline vehicles originally sold, or that have ever been registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began June 27, 2016. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KA0, KA1, KA2, and KA3.
Honda (American Honda Motor Co.) is recalling certain model year 2001-2007 Accord, 2001-2005 Civic, 2001-2004 Honda Civic GX, 2003-2005 Honda Civic Hybrid, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot, 2006 Ridgeline, 2003 Acura 3.2CL, 2003-2006 Acura MDX, and 2002-2003 Acura 3.2TL vehicles. The affected vehicles are equipped with…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began on July 1, 2015. Owners may contact Honda customer service at 1-888-234-2138. Owners may contact Acura customer service at 1-800-382-2238, select option 4. Note: Vehicles that have had their driver frontal air bag replaced previously as part of a recall remedy prior to September 12, 2014 need to have their air bag replaced under this recall as well. Vehicles that, on or after September 12, 2014, received a remedy for a prior driver frontal air bag inflator recall already received an inflator of a different design, and therefore are not included in this recall and do not require additional servicing. Note: This recall fully supersedes recalls 08V-593, 09V-259, 10V-041, 11V-260, 14V-351 and 15V-153. Honda's numbers for this recall are JQ9, JR0, JR1, JR2, JR3, JR4, JR5, JR6, JR7, and JR8.
Honda is recalling certain model year 2007 through 2011 Element passenger vehicles equipped with an accessory trailer hitch wiring harness. The wire that supplies power to the trailer turn signal lights was inadvertently switched with the stop lamp wire. As a result the turn signals only illuminate when the brake lamps are illuminated. This does not…
Risk and remedy
Risk
Without trailer turn signal illumination, the driver's intent is not communicated, potentially increasing the risk of a crash.
Remedy
Honda will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on September 20, 2012. Owners may contact Honda at 1-800-999-1009.
Honda IS recalling certain model year 2005-2010 accord, 2007-2010 CR-V, and 2005-2008 element passenger cars manufactured from july 1, 2004, through september 3, 2010. the outer race of the secondary shaft bearing may be broken during certain driving styles. a broken outer race may cause abnormal noise, the malfunction indicator light to turn on, and…
Risk and remedy
Risk
This could result in a short circuit causing the engine to stall. additionally, broken pieces of the outer race or ball bearing from the secondary shaft may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the park position. engine stall and unexpected vehicle movement increases the risk of a crash or personal injury to persons within the path of a rolling vehicle.
Remedy
Honda will notify owners and dealers will update the automatic transmission control module software free of charge. the safety recall began on august 27, 2011. owners may contact honda automobile customer service at 1-800-999-1009.
All in one mobility IS recalling certain model year 1997 through 2008 conversion vans equipped with vmi/ricon 6-WAY power seat bases. there IS a possibility of a defective weld at the joint between the pivoting plate and the pivoting plate pin.
Risk and remedy
Risk
The seat occupant may be injured if the seat base pin were to break.
Remedy
All in one mobility will notify owners and the vehicles will be repaired free of charge. the safety recall began on june 22, 2010. owners may contact all in one mobility at 1-503-255-5005.
Honda has notified nhtsa of a defect in certain model year 2007 and 2008 odyssey and element passenger vehicles manufactured between july 28, 2006 and august 21, 2008. air can enter the vsa modular pump during an initial self-check process that occurs shortly after each time the engine IS started. it IS possible for enough air to enter the system to…
Risk and remedy
Risk
If the owner does not have any brake service or maintenance performed over a period of months or years, the system can continue to accumulate enough air to affect braking performance, increasing the risk of a crash.
Remedy
Honda will notify owner and honda dealers will repair the vsa modulator by removing any existing air in the brake system then apply sealant and caps to prevent air from entering the brake system free of charge. the safety recall began on may 3, 2010. owners may contact honda at 1-800-999-1009.
Honda IS recalling 241 my 2008 element vehicles. the front bushing bracket of the left trailing arm of the rear suspension may have been improperly welded and could separate from the trailing arm.
Risk and remedy
Risk
A separated bushing bracket could cause the suspension to release the lower portion of the wheel hub, causing a loss of control and damage to the brake system which could lead to a crash.
Remedy
Owners will be contacted by phone and advised to stop driving their vehicles until they have taken their vehicle to a dealer for inspection. dealers will inspect the left rear trailing arm and, if necessary, replace it free of charge. the recall began on july 25, 2008. owners may contact honda at 1-800-999-1009.
Owner complaints
113 complaints5 involved a crash2 injuries
What owners report most
Latest complaints
- Suspension
The front bushing bracket on the left (driver's side) rear trailing arm may have an improper weld and could separate from the arm. I am noticing some rust in this area. I have rustproofed the vehicle to help prolong the life and to avoid a separated bracket which can release the lower portion of the wheel hub and damage the brake system, leading to a loss of vehicle control and an increased risk of a crash.
- Air bags
We were driving on a bumpy road and our driver side curtain airbag deployed and cracked the windshield
- Unknown or other
I was driving on a 65 mph highway when another vehicle forced me off the road causing my vehicle to spin out and hit a guardrail pretty much head on at about 60-65mph. Should my airbags have gone off? My safety could have been at risk because of how my vehicle went from highway speed into a…
I was driving on a 65 mph highway when another vehicle forced me off the road causing my vehicle to spin out and hit a guardrail pretty much head on at about 60-65mph. Should my airbags have gone off? My safety could have been at risk because of how my vehicle went from highway speed into a guardrail, my car bounced off of the guardrail and spun so I was facing traffic coming towards me. I have sent a message to Honda asking about the airbags but I have not received a response, no the vehicle has not been inspected by anyone. I had no airbag sensors light up on my dash. I have a sensor for the passenger airbag as well which said it was off because no one was in the passenger seat. My car is totaled and the frame is bent on the driver side. When my vehicle hit the guardrail my head kept banging on the door, headrest and the beam where the two doors join. I have pretty bad whiplash and have been having some nerve issues on my left side, I am not sure if that constitutes as an injury. I have dash camera footage of me hitting the guardrail as well, my vehicle lost power once I hit it though. With the dash camera footage I do have to get permission from my attorney to release it if you need just because we are pursing the other driver for damages and injuries. I still have the vehicle on my property if it does need to be inspected. My main concern is making sure other drivers will be safe.
- Suspension
Rotted and rusted out trailing arms
- Suspension
The contact owns a 2008 Honda Element. The contact stated that while reversing out of a parking spot, the driver’s side rear trailing arm fractured. There were no warning lights illuminated. Upon researching the failure, the contact linked the failure to NHTSA Campaign Number: 08V349000…
The contact owns a 2008 Honda Element. The contact stated that while reversing out of a parking spot, the driver’s side rear trailing arm fractured. There were no warning lights illuminated. Upon researching the failure, the contact linked the failure to NHTSA Campaign Number: 08V349000 (Suspension). The vehicle was towed to the husband's place of employment. The contact called the local dealer, who confirmed there was no recall coverage on the VIN for the failure. The vehicle was not diagnosed or repaired. The manufacturer was contacted, but no assistance was provided. The approximate failure mileage was 130,000.
- Structure › Body
There is a massive rust spot under the driver side seating position where your feet would rest while driving. Seems as there isn't significant drainage holes in this area.
- Structure › Body · Suspension
My mechanic informed me that this car will no longer pass NYS inspection due to body rust/corrosion holes where the rear trailing arms attach to the car's body. Honda has issued a recall for the same model year CR-V, which has a nearly identical trailing arm attachment design, due to the risk of losing control of the vehicle if the trailing arm mount separates from the body.
- Structure › Body · Suspension
The driver side rear trail arm broke off bending the strut with the tire hanging, it happened in my apartment parking lot, I could have lost my life if this had happened at high speeds or killed somebody else. I’m very lucky to be alive!! Currently it is not inspectable due to the damage. The…
The driver side rear trail arm broke off bending the strut with the tire hanging, it happened in my apartment parking lot, I could have lost my life if this had happened at high speeds or killed somebody else. I’m very lucky to be alive!! Currently it is not inspectable due to the damage. The problem has not been reproduced by a dealer or an independent service centre. The vehicle has not been inspected by anyone or manufacturer. No warning light were present before the failure.
- Structure › Body
I just purchased a 2008 Honda Element and took it for inspection and the entire undercarriage is rusted. I know Honda of Canada will fix or buy back the vehicle. However as I am in the USA my understanding is that for now only the CRV’s are affected. The car cannot be driven as it is a very dangerous concern. Please help.
- Structure › Body
I am writing to formally lodge a complaint regarding a serious safety concern involving the Honda Element model years 2003 through 2011. Specifically, this issue pertains to the rear trailing arm mounting area, which has been observed to rust through on numerous vehicles, including my own 2008…
I am writing to formally lodge a complaint regarding a serious safety concern involving the Honda Element model years 2003 through 2011. Specifically, this issue pertains to the rear trailing arm mounting area, which has been observed to rust through on numerous vehicles, including my own 2008 Honda Element. The rusting of the rear trailing arm mounting area poses a significant safety risk, as it can compromise the structural integrity of the vehicle's suspension system. This deterioration can lead to potential failure of the rear trailing arm, resulting in loss of control of the vehicle, particularly at higher speeds or during emergency maneuvers. The prevalence of this issue across multiple model years suggests a systemic problem that warrants investigation and potential recall. My vehicle, like many others, has experienced this issue despite regular maintenance and care. The rusting has occurred in a manner that is not typical of normal wear and tear, indicating a possible manufacturing or design defect. Given the safety implications of this problem, I urge the NHTSA to conduct a thorough investigation to determine the root cause and ensure the safety of all affected Honda Element owners. I appreciate your attention to this matter and look forward to your prompt response and action.
- Suspension
The contact owns a 2008 Honda Element. The contact stated while driving 20-30 MPH over a bump, the vehicle started fish tailing. The contact was able to pull to the side of the road. The contact stated that he noticed that the rear driver's side tire was sideways. The vehicle was towed to the…
The contact owns a 2008 Honda Element. The contact stated while driving 20-30 MPH over a bump, the vehicle started fish tailing. The contact was able to pull to the side of the road. The contact stated that he noticed that the rear driver's side tire was sideways. The vehicle was towed to the residence. The dealer was contacted and informed the contact that the vehicle was not covered under NHTSA Campaign Number: 08V349000 (Suspension) because the VIN was not included. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 225,000.
- Suspension · Unknown or other
I took my very well maintained Honda Element into the shop for routine maintenance and a pre-spring/summer driving check. They indicated that the driver's side subframe where it meets the rear trailing arm has a dangerous hole and that I should not drive this car any more. We live in Michigan…
I took my very well maintained Honda Element into the shop for routine maintenance and a pre-spring/summer driving check. They indicated that the driver's side subframe where it meets the rear trailing arm has a dangerous hole and that I should not drive this car any more. We live in Michigan where snow/salt are factors. This specific area has been known to fail in Elements and CR-V's and there was a recall on this specific issue for Honda Elements in Canada and CR-V owners in the US and Canada: "The 2007-2011 Honda CR-V is being recalled because the rear trailing arm can fall off due to excessive corrosion, the NHTSA disclosed Thursday. In some cases, the rear frame may be so corroded that Honda will offer to buy the vehicle back from owners to get the safety hazards off the road." Why have the US Elements not been recalled when this is a known safety hazard and the exact same issue as the CR-V's? I am in numerous online forums of Element owners and have seen photographs where this caused life-threatening issues while people were driving. Thankfully, we caught it before that happened to us, but now my loved daily driver is out of commission for a known safety hazard. No one in our family was harmed, but this could have been life threatening if it had not been discovered. The area has not been inspected by police or insurance. Only by our mechanic who specializes in servicing Hondas, Toyotas and Subarus. There were no warning lamps or other warning signs. It just happened to be discovered during routine inspection/service.
- Suspension
The contact owns a 2008 Honda Element. The contact stated while driving 55 MPH, the contact lost control of the vehicle. The contact was able to regain control of the vehicle and pulled over to the shoulder of the roadway. Upon inspection, the contact discovered that the rear driver’s side tire was…
The contact owns a 2008 Honda Element. The contact stated while driving 55 MPH, the contact lost control of the vehicle. The contact was able to regain control of the vehicle and pulled over to the shoulder of the roadway. Upon inspection, the contact discovered that the rear driver’s side tire was leaning outward from the vehicle. The contact called a friend with a trailer and had the vehicle towed to a friend's residence. Upon further inspection, it was discovered that the front mounting bracket on the rear trailer arm had become severely corroded which led to the failure. The manufacturer was notified of the failure and was informed that there were no recalls on the vehicle, but offered no further assistance. The vehicle was not repaired. The failure mileage was approximately 127,000.
- Suspension
Was just about to drive on a 55mph road when the drivers side rear trailing arm fell off from the frame, no prior indication of failure as it passed inspection the previous year. Had checked by my mechanic and says it is not repairable. Excessive corrosion into frame. Searched internet and found recall in Canada for this specific issue. We are lucky it happened when it did otherwise it would have been fatal.
- Suspension
The rear trailing arms are rusting faster than anything else on my beloved Honda. Honda has recalled the Elements of similar model years in Canada for this problem, and the CRV of similar model years in US for this exact problem. This suspension issue could cause a catastrophic failure if left…
The rear trailing arms are rusting faster than anything else on my beloved Honda. Honda has recalled the Elements of similar model years in Canada for this problem, and the CRV of similar model years in US for this exact problem. This suspension issue could cause a catastrophic failure if left unrepaired. My family and I need this vehicle, but it feels unsafe to operate. Why hasn't Honda recalled the Honda Element for this known issue?
- Structure › Body · Suspension
The drivers side rear trailing arm mounting point on my Honda Element has completely rotted out, making my car a seriously unsafe vehicle to drive. This is a well known issue to both Honda and the NHTSA as Honda has already recalled both the Element and CR-V in Canada, and the CR-V here in the USA, but not the Element. NHTSA # 23v-228, Transport Canada Recall - 2021024 - HONDA
- Structure › Body · Suspension · Wheels
My Honda Element unibody has rusted out resulting in the real axle trailing arm separating from the vehicle. This happened while my daughter was driving - luckily she was not injured. This is a known issue at Honda. Honda Elements years 2003-2011 have already been recalled for a repair or…
My Honda Element unibody has rusted out resulting in the real axle trailing arm separating from the vehicle. This happened while my daughter was driving - luckily she was not injured. This is a known issue at Honda. Honda Elements years 2003-2011 have already been recalled for a repair or reimbursement in Canada (see recall # 2021024) and all Honda CR-Vs in the United States model years 2007-2011 have also been recalled in the Unites States for the same issue (NHTSA # 23V-228). This issue represents an extremely hazardous risk in the Honda Elements, as well as the potential complete loss of the vehcile. The recall for the Elements should be extended to the United States immediately.
- Suspension
Rear wheel suspension broke while driving. Wheel forced into wheel well. ( Rear Trailing arm Broke?)
- Structure
The contact owns a 2008 Honda Element. The contact stated that while driving at an undisclosed speed, the rear driver's side trailing arm fractured without warning. The contact was able to veer the vehicle off the road and turned off the vehicle. The vehicle was towed to an independent mechanic…
The contact owns a 2008 Honda Element. The contact stated that while driving at an undisclosed speed, the rear driver's side trailing arm fractured without warning. The contact was able to veer the vehicle off the road and turned off the vehicle. The vehicle was towed to an independent mechanic where it was diagnosed that the rear driver's side trailing arm was rusted and needed to be replaced. Neither the dealer nor the manufacturer was notified of the failure. The failure mileage was approximately 124,000.
- Structure › Frame and members
The contact owns a 2008 Honda Element. The contact stated while receiving a routine service at the dealer, the mechanic became aware that the rear driver’s side sub frame was rusted. The contact was informed that sub frame needed to be replaced and that the vehicle was unsafe to drive. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was 136,999.
- Suspension
Left rear lower control arm frame rusted. Lower control arm detached from the vehicle. Appears to be a recall in Canada on element and CRV but only CRV in USA.
- Suspension
The contact owns a 2008 Honda Element. The contact stated while changing the rear driver’s side tire, the contact became aware that the trailing arm link rail on the rear driver’s side had separated from the vehicle. The vehicle was not diagnosed. The dealer was not contacted. The manufacturer was…
The contact owns a 2008 Honda Element. The contact stated while changing the rear driver’s side tire, the contact became aware that the trailing arm link rail on the rear driver’s side had separated from the vehicle. The vehicle was not diagnosed. The dealer was not contacted. The manufacturer was contacted and stated that they were aware of the failure but there was no recall for the failure. The failure mileage was 197,000.
- Suspension
The contact owns a 2008 Honda Element. The vehicle was inspected by an independent mechanic and the contact was informed that the rear driver’s side trailing arm had detached from the vehicle. The vehicle was not repaired. The manufacturer was not contacted. The failure mileage was 170,000.
- Electronic stability control (esc)
The contact owns a 2005 Hyundai Tucson. The contact stated while driving approximately 20 MPH and making a left turn, the vehicle stopped independently. The contact stated that she depressed the accelerator pedal, and the vehicle failed to respond as needed. The contact stated no warning light was…
The contact owns a 2005 Hyundai Tucson. The contact stated while driving approximately 20 MPH and making a left turn, the vehicle stopped independently. The contact stated that she depressed the accelerator pedal, and the vehicle failed to respond as needed. The contact stated no warning light was illuminated. The contact had the vehicle towed to an independent mechanic, where it was diagnosed and determined that two brake pads, one brake line, and one caliper on the front brakes needed to be replaced; however, the vehicle had not been repaired. The contact researched online and related the failure to NHTSA Campaign Number: 05V119000 (Electronic Stability Control). The manufacturer had been informed of the failure. The failure mileage was approximately 116,000. The contact stated there is an appointment to have repairs made on 05/23/23 and the dealership is also charging $150 diagnostic fee in addition to repairs.
- Structure
The contact owns a 2008 Honda Element. The contact stated that the vehicle was taken to an independent mechanic for brake repair however, the mechanic became aware of corrosion on the driver's side rear trailing arm. The independent mechanic informed the contact that the vehicle was unsafe to drive…
The contact owns a 2008 Honda Element. The contact stated that the vehicle was taken to an independent mechanic for brake repair however, the mechanic became aware of corrosion on the driver's side rear trailing arm. The independent mechanic informed the contact that the vehicle was unsafe to drive and could not be repaired. The vehicle was awaiting an appointment with the local dealer. The contact was relating the failure to NHTSA Campaign Number: 23V228000 (Structure) however, the vehicle was not included in the recall. The manufacturer was notified of the failure and a case was opened but had since closed as the vehicle was not included in the recall. The approximate failure mileage was 148,000.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air in brake system
By letter dated March 15, 2010, American Honda Motor Corp. (HMC) notified the National Highway Traffic Safety Administration (NHTSA) that it will conduct a safety recall (NHTSA Recall No. 10V-098) to address a defect in approximately 412,000 model year (MY) 2007 and 2008 Honda Odyssey and Element vehicles equipped…
By letter dated March 15, 2010, American Honda Motor Corp. (HMC) notified the National Highway Traffic Safety Administration (NHTSA) that it will conduct a safety recall (NHTSA Recall No. 10V-098) to address a defect in approximately 412,000 model year (MY) 2007 and 2008 Honda Odyssey and Element vehicles equipped with an ABS/VSA/TCS modulator. The recalled Odyssey vehicles were built from August 2006 August 2008.The recalled Element vehicles were built from July 2006 to July 2008. According to Honda, during an initial self-check process that occurs shortly after each engine ignition cycle, the self-diagnostic software for the VSA modulator allows a vacuum condition that can exist for several hours, allowing air to enter the VSA modulator pump.Over time, and thousands of engine ignition cycles, it is possible for enough air to enter the system to result in a brake pedal that feels soft or lower to the floor.If the customer does not have any brake service or maintenance performed over a period of months or years, the system can continue to accumulate enough air to affect braking performance.To correct the safety defect, Honda dealers will remove existing air in the brake system then apply sealant and caps to the VSA modulator to prevent air from entering the brake system, free of charge. The action taken by Honda is sufficient to resolve the issues raised by this investigation. The agency will continue to monitor this issue and reserves the right to take further action if warranted by the circumstances.Accordingly, this investigation is closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10213538Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passenger's airbag inflator only.
- 10186009"Service Bulletin - There are several A/C leak detection tools available. -Refrigerant Gas Leak Detector -Ultrasonic Leak Detector -Leak Dye"
- 10172568Service Bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passenger's airbag inflator only.
- 10172564Service Bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement driver's airbag inflator only.
- 10142447Tech line summary article - Is the MIL on with DTC P2271 (secondary HO2S [sensor 2] circuit signal stuck rich)? What's likely causing this is the PCM is misinterpreting the A/F sensor (sensor 1) signals, causing the PCM to think that sensor 2 is stuck rich. To fix this issue, replace both sensors.
- 10141171Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passengers airbag inflator only.
- 10141168Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passengers airbag inflator only.
- 10139568Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects to the replacement driver's airbag inflator only.
- 10128880Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128879Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128878Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128578Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. At this time, affected VINs have not been determined.
- 10128577Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. At this time, affected VINs have not been determined.
- 10128564Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that over time may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material possibly causing injury or fatality to vehicle occupants.
- 10128559Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of July 23, 2014, affected VINs have been identified, and service bulletins 14-040, Safety Recall: Accord, Civic, and Others ? Front Passenger?s Airbag Inflator Can Be Over-Pressurized, 14-045, Recall: Front Driver?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity Recall, and 14-046, Recall: Front Passenger?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity have been posted to ISIS. However, due to the large number of affected units, American Honda is still in the process of populating the VIN status inquiry function on iN, which is expected to take several days. When this process is complete, American Honda will notify all dealers again via iN message. Until that time, the existing acknowledgement procedure must be used for all potentially affected vehicles.
- 10128531Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of August 4, 2014, affected VINs have been identified, and VIN status inquiry has been updated.
- 10124983Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10118840Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants. Affected Honda vehicles were originally sold and/or registered in the following geographic locations: Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, and the U.S. Virgin Islands.
- 10118182Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10118031Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants. Affected Honda vehicles were originally sold and/or registered in the following geographic locations: Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, and the U.S. Virgin Islands.
- 10115219Service bulletin - For any TPMS-related warranty repairs, all recorded DTCs must now be entered into the warranty claim. Make sure your repair order includes those DTCs.
- 10115209Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108579Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108532Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108461Customer letter - please be aware, we have a national safety improvement campaign and recall under way to repair airbag inflators, at no cost to you, in certain honda and acura vehicles (listed below). To see if your vehicle needs immediate attention, please check its recall status.
- 10108445Customer letter - please be aware, we have a national safety improvement campaign and recall under way to repair airbag inflators, at no cost to you, in certain honda and acura vehicles (listed below). To see if your vehicle needs immediate attention, please check its recall status.
- 10108257"Service bulletin - certain honda vehicles operated in areas known for high absolute humidity and high heat may contain a drivers airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10108232"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even if the vehicle was repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10108186"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even if the vehicle was repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10100701"Service bulletin - in certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10099910Poster of listed honda vehicles affected by an airbag inflator recall - spanish.
- 10099909Poster of listed honda vehicles affected by an airbag inflator recall - english.
- 10099821"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even though the vehicle may have been repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10098946"Service bulletin - the mil comes on with one of these dtcs: p2646/p2651 (rocker arm oil pressure switch circuit low voltage). P2647/p2652 (rocker arm oil pressure switch circuit high voltage). Note: the symptom may be intermittent and you may not be able to duplicate it after clearing the dtc. The rocker arm oil pressure switch may fail intermittently."
- 10087261Service bulletin - all of the listed vehicles have a type 4 immobilizer system that disables the vehicle unless a programmed ignition key IS used. The type 4 system IS different than previous systems in that the transponder ID code in the key IS a rolling-type code instead of a fixed code. In this service bulletin, a programmed ignition key refers to a transponder-type key that has been cut to fit the ignition switch and whose transponder ID code IS recognized by the immobilizer system. If you try to start the engine without a programmed ignition key, the engine cranks, but it does not start.
- 10086381Us virgin islands newspaper advertisements to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086308Text messages sent to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086306Posters sent to hawaiian independent repair facilities, automotive part stores, car washes, and gas stations to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086302Advertisement in hawaiian newspapers to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086291Flyer circulated to the residents of hawaii to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
Every Honda Element model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.