2007 Honda Element
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Honda › Element › 2007
These records cover every 2007 Honda Element. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
12 recalls name the 2007 Honda Element. Newest first.
Dorman Products, Inc. (Dorman) is recalling certain Accelerator Pedal Assemblies part numbers 699-114 and 825-5029-1, sold as replacement parts for 2003-2006 Acura MDX, 2004-2008 Acura TL and TSX, 2003-2007 Honda Accord, 2005-2006 Honda CR-V, 2007-2011 Honda Element, 2005-2008 Honda Pilot and 2006-2014 Honda Ridgeline vehicles. The rotating portion of the…
Risk and remedy
Risk
If the accelerator pedal binds, the engine may not quickly return to idle after the pedal is no longer pressed, increasing the risk of a crash.
Remedy
Dorman will notify owners, and qualified service facilities will replace the affected accelerator pedal assemblies, free of charge. The recall began December 9, 2019. Owners may contact Dorman customer service at 1-800-523-2492, using option 5. Dorman's number for this recall is AS1019XXXX.
Honda (American Honda Motor Co.) is recalling certain 2003 Acura 3.2CL, 2002-2003 3.2TL, 2003-2006 MDX, 2001-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot and 2006 Ridgeline vehicles. These vehicles are equipped with driver frontal air bag…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are Q5A and Y58.
Honda (American Honda Motor Co.) is recalling certain 2003-2006 Acura MDX, 2005-2012 RL, 2003-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2007-2008 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The vehicles are equipped with passenger frontal air bag…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal airbag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are E5D and X5C.
Honda (American Honda Motor Co.) is recalling specific 2003 Acura 3.2CL, 2013-2016 ILX, 2013-2014 ILX Hybrid, 2003-2006 MDX, 2007-2016 RDX, 2002-2003 3.2TL, 2004-2006, and 2009-2014 TL, 2010-2013 ZDX and 2001-2007 and 2009 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2007 and 2010-2011 CR-V, 2003-2011 Element, 2007…
Risk and remedy
Risk
An explosion of an inflator within the driver frontal air bag module may result in sharp metal fragments striking the driver, front seat passenger or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver's air bag inflator with an alternate inflator, free of charge. The recall began April 10, 2019. Honda owners may contact customer service at 1-888-234-2138. Honda's number for this recall is O41. Acura owners may contact customer service at 1-888-234-2138. Acura's number for this recall is U40.
Honda (American Honda Motor Co.) is recalling certain 2003-2012 Honda Accord and Pilot, 2010 Accord Crosstour, 2001-2011 Civic, 2002-2011 CR-V, 2003-2004, 2006-2008 and 2011 Element, 2007 and 2009-2013 Fit, 2010-2012 Insight, 2002-2004 Odyssey, and 2012 Ridgeline vehicles. The front passenger air bag may have been installed incorrectly during replacement.
Risk and remedy
Risk
An incorrectly installed air bag may deploy improperly in the event of a crash, increasing the risk of injury.
Remedy
Honda will notify owners, and dealers will inspect and, if necessary, replace the passenger frontal air bag module assembly, free of charge. The recall began June 22, 2018. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are K1P, and M1O.
Honda (American Honda Motor Co.) is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2011 Honda Element vehicles, 2005-2012 Acura RL vehicles, 2006-2012 Honda Ridgeline vehicles, 2007-2008 Honda Fit vehicles and 2005-2008 Honda Pilot vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall bagan March 2017. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KD9 and KE0.
Honda (American Honda Motor Co.) is recalling certain model year 2003-2006 Acura MDX, 2005-2011 Acura RL, 2005-2006 Honda CR-V, 2003-2011 Element, 2007-2008 Fit, 2003-2008 Pilot, 2002-2004 Odyssey, and 2006-2011 Ridgeline vehicles originally sold, or that have ever been registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began June 27, 2016. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KA0, KA1, KA2, and KA3.
Honda (American Honda Motor Co.) is recalling certain model year 2001-2007 Accord, 2001-2005 Civic, 2001-2004 Honda Civic GX, 2003-2005 Honda Civic Hybrid, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot, 2006 Ridgeline, 2003 Acura 3.2CL, 2003-2006 Acura MDX, and 2002-2003 Acura 3.2TL vehicles. The affected vehicles are equipped with…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began on July 1, 2015. Owners may contact Honda customer service at 1-888-234-2138. Owners may contact Acura customer service at 1-800-382-2238, select option 4. Note: Vehicles that have had their driver frontal air bag replaced previously as part of a recall remedy prior to September 12, 2014 need to have their air bag replaced under this recall as well. Vehicles that, on or after September 12, 2014, received a remedy for a prior driver frontal air bag inflator recall already received an inflator of a different design, and therefore are not included in this recall and do not require additional servicing. Note: This recall fully supersedes recalls 08V-593, 09V-259, 10V-041, 11V-260, 14V-351 and 15V-153. Honda's numbers for this recall are JQ9, JR0, JR1, JR2, JR3, JR4, JR5, JR6, JR7, and JR8.
Honda is recalling certain model year 2007 through 2011 Element passenger vehicles equipped with an accessory trailer hitch wiring harness. The wire that supplies power to the trailer turn signal lights was inadvertently switched with the stop lamp wire. As a result the turn signals only illuminate when the brake lamps are illuminated. This does not…
Risk and remedy
Risk
Without trailer turn signal illumination, the driver's intent is not communicated, potentially increasing the risk of a crash.
Remedy
Honda will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on September 20, 2012. Owners may contact Honda at 1-800-999-1009.
Honda IS recalling certain model year 2005-2010 accord, 2007-2010 CR-V, and 2005-2008 element passenger cars manufactured from july 1, 2004, through september 3, 2010. the outer race of the secondary shaft bearing may be broken during certain driving styles. a broken outer race may cause abnormal noise, the malfunction indicator light to turn on, and…
Risk and remedy
Risk
This could result in a short circuit causing the engine to stall. additionally, broken pieces of the outer race or ball bearing from the secondary shaft may become lodged in the parking pawl resulting in the vehicle rolling after the driver has placed the gear selector in the park position. engine stall and unexpected vehicle movement increases the risk of a crash or personal injury to persons within the path of a rolling vehicle.
Remedy
Honda will notify owners and dealers will update the automatic transmission control module software free of charge. the safety recall began on august 27, 2011. owners may contact honda automobile customer service at 1-800-999-1009.
Honda has notified nhtsa of a defect in certain model year 2007 and 2008 odyssey and element passenger vehicles manufactured between july 28, 2006 and august 21, 2008. air can enter the vsa modular pump during an initial self-check process that occurs shortly after each time the engine IS started. it IS possible for enough air to enter the system to…
Risk and remedy
Risk
If the owner does not have any brake service or maintenance performed over a period of months or years, the system can continue to accumulate enough air to affect braking performance, increasing the risk of a crash.
Remedy
Honda will notify owner and honda dealers will repair the vsa modulator by removing any existing air in the brake system then apply sealant and caps to prevent air from entering the brake system free of charge. the safety recall began on may 3, 2010. owners may contact honda at 1-800-999-1009.
Dope, inc. IS recalling 42,540 combination corner and bumper lamp assemblies of various part numbers sold for use as aftermarket equipment for various passenger vehicles. these headlamps fail to conform to the requirements of federal motor vehicle safety standard no. 108, "lamps, reflective devices, and associated equipment." these lamps do not contain…
Risk and remedy
Risk
Decreased lighting visibility may result in a vehicle crash.
Remedy
Dope, inc. Will notify owners and offer a full refund for the noncompliant combination lamps. the safety recall began on july 28, 2009. owners may contact dope, inc. At 1-626-272-1798.
Owner complaints
112 complaints6 involved a crash6 injuries
What owners report most
Latest complaints
- Suspension · Wheels
Rear Trailing Arm Rusted Out, Car Can not be repaired per two citified mechanics.
- Electrical system · Trailer hitches
The contact owns a 2007 Honda Element. The contact received notification of NHTSA Campaign Number: 12V436000 (Electrical System, Trailer Hitches) and would like to be removed from the recall distribution list. The contact was advised by the local dealer that the vehicle was not eligible for recall…
The contact owns a 2007 Honda Element. The contact received notification of NHTSA Campaign Number: 12V436000 (Electrical System, Trailer Hitches) and would like to be removed from the recall distribution list. The contact was advised by the local dealer that the vehicle was not eligible for recall repairs due to the title being salvaged and that the part was not an attachment for the vehicle. The manufacturer was made aware of the issues.
- Suspension
While driving up my driveway on the way home the left swing arm seperated from the unibody allowing the left rear wheel to move aft jamming the left rear tire into the rear inside fender effectively locking that wheel at about a 20 degree angle.
- Power train · Suspension
The rest frame has rusted from the inside out, frame actually broke when going in for repairs. Was raised on lift for basic brake repair and the frame separated on the rear driver side. Same exact issue that was recalled in crvs of same year.
- Suspension
Left rear trailing arm completely broke off while I was on the highway. Very unsafe. This Element needs to be recalled, like the CRV. It was recalled in Canada. This is absolutely dangerous and I could have died.
- Structure › Body
Brought vehicle (2007 Honda Element) to have new brakes and tires put on vehicle. Discovered rusted through rear frame. Declined to finish work of vehicle upgrades due to being unsafe to further drive vehicle. Mechanic said he didn't feel comfortable working on vehicle in the condition. Suggested…
Brought vehicle (2007 Honda Element) to have new brakes and tires put on vehicle. Discovered rusted through rear frame. Declined to finish work of vehicle upgrades due to being unsafe to further drive vehicle. Mechanic said he didn't feel comfortable working on vehicle in the condition. Suggested taking to body shop to attempt replacing but would cost more than vehicle was worth. Suggested taking to dealer and seeing if they would offer recall since one was issued in Canada a couple years ago. He wouldn't recommend driving vehicle due to potential break and loss of control of vehicle rear control arms.
- Suspension
The contact owns a 2007 Honda Element. The contact stated that while driving approximately 30 MPH, the rear end of the vehicle became unstable and the rear driver's side wheel failed rendering the vehicle undrivable. The vehicle was towed to a friend's home and later examined by a local mechanic…
The contact owns a 2007 Honda Element. The contact stated that while driving approximately 30 MPH, the rear end of the vehicle became unstable and the rear driver's side wheel failed rendering the vehicle undrivable. The vehicle was towed to a friend's home and later examined by a local mechanic who diagnosed that the rear driver's side suspension swing arm had fractured due to severe rusting and corrosion of the vehicle's subframe. The vehicle was not yet repaired. The manufacturer was notified of the failure but no assistance was offered. The local dealer was not notified of the failure. The failure mileage was 169,000.
- Suspension
I was driving with my family to the local fair a few miles from home. When the steering got loose around a sharp bend at 35-40 mph. I was able to keep control and slow to where I could safely look at issues. Thankfully I was going slow. The mount for the rear trailing arm pulled out of the mounting location on the driver side.
- Suspension
We are trying to sell our 2007 Honda Element and have found there is extensive rust under the car, likely due to the NY road salt. We have older cars in the family / area without this problem. We found out Canada has issued a recall over this matter. I have lost confidence that our car is safe to drive, well before the expected end of serviceable life. Can you have Honda remedy this situation
- Suspension
Rusted detached rear trailing arm. This is the same part involved in the Honda CR-V recall. This recall should be extended to the Honda Element which is on the same platform.
- Suspension
The left rear trailing arm mount is very rusty as is the inner rocker. This is a problem with both the CRV and Element ,it's a safety issue because the mount can detach and cause a accident. This vehicle has had a yearly inspection in my state and has passed I am concerned it won't in the future…
The left rear trailing arm mount is very rusty as is the inner rocker. This is a problem with both the CRV and Element ,it's a safety issue because the mount can detach and cause a accident. This vehicle has had a yearly inspection in my state and has passed I am concerned it won't in the future because of trailing arm rust. The element are built on the same platform as the CRV witch is being recalled for this problem. The elements are being recalled in Canada for this problem.
- Suspension
Rear suspension failure due to excessive corrosion. Fortunately failure occurred at low speed. Total loss of control would have happened at high speed. Independent body shops confirm this damage is not repairable. Please note that there is a recall for Honda Elements in Canada for the same defect. I called American Honda and they deny any knowledge of this defect in the U.S.
- Suspension
Rear suspension failure due to excessive chassis corosion. Fortunately failure occurred at low speed. Total loss of control would result at high speed. independent body shops confirm this defect IS not reairable. Please note that there IS a recall for honda elements in canada for this same defect. I called american honda and they deny any knowledge of this defect in the u.s.
- Structure › Body
The frame of the vehicle has rusted out at the bolt where the rear trailing arm connects to the frame. The rust has caused the vehicle to fail Maine State Inspection. This vehicle defect has led to a recall in Canada: “On certain vehicles, the rear frame could rust. In extreme cases, this could…
The frame of the vehicle has rusted out at the bolt where the rear trailing arm connects to the frame. The rust has caused the vehicle to fail Maine State Inspection. This vehicle defect has led to a recall in Canada: “On certain vehicles, the rear frame could rust. In extreme cases, this could result in a rear trailing arm separating from the vehicle. This recall applies to vehicles originally sold or currently registered in areas of heavy road salt usage (Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island, and Newfoundland & Labrador).” https://recallmonitor.ca/recall/2021024 Maine and New Hampshire, where this vehicle has been registered for its entire life, are areas of heavy road salt usage. According to Honda Canada, “ A rear trailing arm that separates could cause a loss of control and increase the risk of a crash.” The vehicle is available for inspection upon request. It was inspected by a garage certified to provide Maine State Inspections. The manufacturer has acknowledged the defect in Canada. There were no warning lamps related to this issue.
- Suspension
While driving, without notice at all, the drivers side rear suspension ,wheel, and all the holds it together became dislocated/disassembled from the car while going about 40mph. Upon further investigation, I found the whole frame mount for the rear suspension had completely rotted away and caused…
While driving, without notice at all, the drivers side rear suspension ,wheel, and all the holds it together became dislocated/disassembled from the car while going about 40mph. Upon further investigation, I found the whole frame mount for the rear suspension had completely rotted away and caused this whole issue. NO PRIOR WARNING AT ALL!! This is a potentiality deadly issue.. I had just come off the highway doin 70 mph... if this would of happened there...it would of been a completely different outcome. The year/make/model of my vehicle has already been recalled for this issue.. BUT my vin # wasn't included?.?.?. THIS IS WRONG!! THIS IS A SERIOUS ISSUE THAT NO AMOUNT OF MAINTENANCE WILL STOP!!
- Suspension › Rear › Axle › Non-powered axle assembly
The contact owns a 2007 Honda Element. The contact stated while driving 25 MPH, the contact drove over a pothole and noticed that the driver’s side control arm on the rear axle fractured and detached from the vehicle, causing the rear driver’s side tire to stick out from underneath the vehicle. The…
The contact owns a 2007 Honda Element. The contact stated while driving 25 MPH, the contact drove over a pothole and noticed that the driver’s side control arm on the rear axle fractured and detached from the vehicle, causing the rear driver’s side tire to stick out from underneath the vehicle. The contact pulled over to the side of the roadway and had the vehicle towed to an independent mechanic where the vehicle was inspected and diagnosed. The contact was informed that rust and corrosion on the rear axle had caused the failure and that the axle needed to be replaced. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 102,000.
- Unknown or other
Ho 11851603 last known miles from ho (airbag recall service)
- Air bags · Unknown or other
Odometer rolled back in re-sale; result of return due to natural disaster. (2000Miles)
- Seat belts
During normal driving, no hard braking involved, the passenger seatbelt consistently locks up - causing my passengers to be locked in place. it locks if a passenger leans forward to remove something from the dash cubbies (which are just outside of arms reach but well within normal range reach).…
During normal driving, no hard braking involved, the passenger seatbelt consistently locks up - causing my passengers to be locked in place. it locks if a passenger leans forward to remove something from the dash cubbies (which are just outside of arms reach but well within normal range reach). it locks if the passenger leans to reach behind the driver's seat. it seems as if the belt has been designed too short or the locking mechanism overly sensitive. should a collision happen while locked, there would be absolutely no give and could cause them significant harm.
- Electronic stability control (esc)
Vsa light comes on and turns off intermittently..and at times it happens on the highway which causes the car to jerk and not run right when going above 2500rpm..then the light will go away but the cel indicator will stay on ...at my wits end and dont know what to do
- Air bags
The srs sensor IS bad due to air bag steering wheel being recalled and replaced IS part of the system that air bag functions by. I believe the or all parts should recalled
- Vehicle speed control
The indicators on my odometer and speedometer fell off into my dash, emitting the background light. I was driving the car home and parked it .when I stopped both indicators fell. I did not hit any pot holes or bumps. I have read in your complaints that this has happened before, the light IS very…
The indicators on my odometer and speedometer fell off into my dash, emitting the background light. I was driving the car home and parked it .when I stopped both indicators fell. I did not hit any pot holes or bumps. I have read in your complaints that this has happened before, the light IS very bright and I had to place tape over it to avoid the glare very dangerous otherwise.. I can no longer tell my speed. My gas indicator does not seem to be accurate either as it falls below the empty line.
- Air bags
TL* the contact owned a 2007 honda element. While driving approximately 35-40 mph, the contact crashed into the rear of another vehicle, which caused a chain reaction. The contact stated that the air bags failed to deploy. The contact later experienced pain in the left arm. Medical attention was…
TL* the contact owned a 2007 honda element. While driving approximately 35-40 mph, the contact crashed into the rear of another vehicle, which caused a chain reaction. The contact stated that the air bags failed to deploy. The contact later experienced pain in the left arm. Medical attention was not received. A police report was filed. The contact was able to drive the vehicle home. The vehicle was towed to the insurance company's lot to be inspected. The vehicle was not diagnosed and was deemed destroyed. A dealer was not contacted. The manufacturer was contacted and provided case number: 09915922. The approximate failure mileage was 310,000.
- Air bags
Takata recall: this IS regarding a 2007 honda element. we have not owned this vehicle since 2007, and probably traded it on another car. it's bern such a long time, we do not remember which dealer we dealt with. we have received numerous recall notices from honda, and each time, by phone…
Takata recall: this IS regarding a 2007 honda element. we have not owned this vehicle since 2007, and probably traded it on another car. it's bern such a long time, we do not remember which dealer we dealt with. we have received numerous recall notices from honda, and each time, by phone or response card, have informed them that we no longer own the car. please update your records, and take us off of the notification list. we will no longer respond to notices regarding this car. it's annoying that honda IS unable to update their records with our numerous contacts with them. thank you.
- Unknown or other
Recall on the vehicle IS for a faulty wiring harness for the trailer hitch. My vehicle has a trailer hitch and wires inside the vehicle, but apparently the hitch isn't oem, so "it doesn't matter" according to nelson honda at 2500 greensboro road, martinsville, va 24112. Honda wouldn't have included…
Recall on the vehicle IS for a faulty wiring harness for the trailer hitch. My vehicle has a trailer hitch and wires inside the vehicle, but apparently the hitch isn't oem, so "it doesn't matter" according to nelson honda at 2500 greensboro road, martinsville, va 24112. Honda wouldn't have included the vin unless it had the part that needs fixing, but the dealer refused because it didn't matter for my car. If it doesn't matter, the recall should be cleared from my vin, but I suspect they just don't want to do the work since the hitch isn't oem but the wiring still IS. They told me that the hitch wasn't there's so it wouldn't matter, but it's the lights/power connector. the only reason I didn't pursue this originally IS because I'm not towing anything, however I expect this to change in the future and I'm having other problems with the dealership in not verifying parts I purchase separately before attempting to use (voiding return policy) so that I have to buy their parts instead.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air in brake system
By letter dated March 15, 2010, American Honda Motor Corp. (HMC) notified the National Highway Traffic Safety Administration (NHTSA) that it will conduct a safety recall (NHTSA Recall No. 10V-098) to address a defect in approximately 412,000 model year (MY) 2007 and 2008 Honda Odyssey and Element vehicles equipped…
By letter dated March 15, 2010, American Honda Motor Corp. (HMC) notified the National Highway Traffic Safety Administration (NHTSA) that it will conduct a safety recall (NHTSA Recall No. 10V-098) to address a defect in approximately 412,000 model year (MY) 2007 and 2008 Honda Odyssey and Element vehicles equipped with an ABS/VSA/TCS modulator. The recalled Odyssey vehicles were built from August 2006 August 2008.The recalled Element vehicles were built from July 2006 to July 2008. According to Honda, during an initial self-check process that occurs shortly after each engine ignition cycle, the self-diagnostic software for the VSA modulator allows a vacuum condition that can exist for several hours, allowing air to enter the VSA modulator pump.Over time, and thousands of engine ignition cycles, it is possible for enough air to enter the system to result in a brake pedal that feels soft or lower to the floor.If the customer does not have any brake service or maintenance performed over a period of months or years, the system can continue to accumulate enough air to affect braking performance.To correct the safety defect, Honda dealers will remove existing air in the brake system then apply sealant and caps to the VSA modulator to prevent air from entering the brake system, free of charge. The action taken by Honda is sufficient to resolve the issues raised by this investigation. The agency will continue to monitor this issue and reserves the right to take further action if warranted by the circumstances.Accordingly, this investigation is closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10213538Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passenger's airbag inflator only.
- 10186009"Service Bulletin - There are several A/C leak detection tools available. -Refrigerant Gas Leak Detector -Ultrasonic Leak Detector -Leak Dye"
- 10172568Service Bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passenger's airbag inflator only.
- 10172564Service Bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement driver's airbag inflator only.
- 10142447Tech line summary article - Is the MIL on with DTC P2271 (secondary HO2S [sensor 2] circuit signal stuck rich)? What's likely causing this is the PCM is misinterpreting the A/F sensor (sensor 1) signals, causing the PCM to think that sensor 2 is stuck rich. To fix this issue, replace both sensors.
- 10141171Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passengers airbag inflator only.
- 10141168Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passengers airbag inflator only.
- 10139568Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects to the replacement driver's airbag inflator only.
- 10128880Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128879Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128878Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128578Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. At this time, affected VINs have not been determined.
- 10128577Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. At this time, affected VINs have not been determined.
- 10128564Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that over time may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material possibly causing injury or fatality to vehicle occupants.
- 10128559Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of July 23, 2014, affected VINs have been identified, and service bulletins 14-040, Safety Recall: Accord, Civic, and Others ? Front Passenger?s Airbag Inflator Can Be Over-Pressurized, 14-045, Recall: Front Driver?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity Recall, and 14-046, Recall: Front Passenger?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity have been posted to ISIS. However, due to the large number of affected units, American Honda is still in the process of populating the VIN status inquiry function on iN, which is expected to take several days. When this process is complete, American Honda will notify all dealers again via iN message. Until that time, the existing acknowledgement procedure must be used for all potentially affected vehicles.
- 10128531Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of August 4, 2014, affected VINs have been identified, and VIN status inquiry has been updated.
- 10124983Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10118840Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants. Affected Honda vehicles were originally sold and/or registered in the following geographic locations: Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, and the U.S. Virgin Islands.
- 10118182Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10118031Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants. Affected Honda vehicles were originally sold and/or registered in the following geographic locations: Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, and the U.S. Virgin Islands.
- 10115219Service bulletin - For any TPMS-related warranty repairs, all recorded DTCs must now be entered into the warranty claim. Make sure your repair order includes those DTCs.
- 10115209Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108579Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108532Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108461Customer letter - please be aware, we have a national safety improvement campaign and recall under way to repair airbag inflators, at no cost to you, in certain honda and acura vehicles (listed below). To see if your vehicle needs immediate attention, please check its recall status.
- 10108445Customer letter - please be aware, we have a national safety improvement campaign and recall under way to repair airbag inflators, at no cost to you, in certain honda and acura vehicles (listed below). To see if your vehicle needs immediate attention, please check its recall status.
- 10108257"Service bulletin - certain honda vehicles operated in areas known for high absolute humidity and high heat may contain a drivers airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10108232"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even if the vehicle was repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10108186"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even if the vehicle was repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10100701"Service bulletin - in certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10099910Poster of listed honda vehicles affected by an airbag inflator recall - spanish.
- 10099909Poster of listed honda vehicles affected by an airbag inflator recall - english.
- 10099821"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even though the vehicle may have been repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10098946"Service bulletin - the mil comes on with one of these dtcs: p2646/p2651 (rocker arm oil pressure switch circuit low voltage). P2647/p2652 (rocker arm oil pressure switch circuit high voltage). Note: the symptom may be intermittent and you may not be able to duplicate it after clearing the dtc. The rocker arm oil pressure switch may fail intermittently."
- 10087261Service bulletin - all of the listed vehicles have a type 4 immobilizer system that disables the vehicle unless a programmed ignition key IS used. The type 4 system IS different than previous systems in that the transponder ID code in the key IS a rolling-type code instead of a fixed code. In this service bulletin, a programmed ignition key refers to a transponder-type key that has been cut to fit the ignition switch and whose transponder ID code IS recognized by the immobilizer system. If you try to start the engine without a programmed ignition key, the engine cranks, but it does not start.
- 10086381Us virgin islands newspaper advertisements to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086308Text messages sent to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086306Posters sent to hawaiian independent repair facilities, automotive part stores, car washes, and gas stations to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086302Advertisement in hawaiian newspapers to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086291Flyer circulated to the residents of hawaii to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
Every Honda Element model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.