2009 Honda Element
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Honda › Element › 2009
These records cover every 2009 Honda Element. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
9 recalls name the 2009 Honda Element. Newest first.
Dorman Products, Inc. (Dorman) is recalling certain Accelerator Pedal Assemblies part numbers 699-114 and 825-5029-1, sold as replacement parts for 2003-2006 Acura MDX, 2004-2008 Acura TL and TSX, 2003-2007 Honda Accord, 2005-2006 Honda CR-V, 2007-2011 Honda Element, 2005-2008 Honda Pilot and 2006-2014 Honda Ridgeline vehicles. The rotating portion of the…
Risk and remedy
Risk
If the accelerator pedal binds, the engine may not quickly return to idle after the pedal is no longer pressed, increasing the risk of a crash.
Remedy
Dorman will notify owners, and qualified service facilities will replace the affected accelerator pedal assemblies, free of charge. The recall began December 9, 2019. Owners may contact Dorman customer service at 1-800-523-2492, using option 5. Dorman's number for this recall is AS1019XXXX.
Honda (American Honda Motor Co.) is recalling certain 2003 Acura 3.2CL, 2002-2003 3.2TL, 2003-2006 MDX, 2001-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot and 2006 Ridgeline vehicles. These vehicles are equipped with driver frontal air bag…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are Q5A and Y58.
Honda (American Honda Motor Co.) is recalling certain 2003-2006 Acura MDX, 2005-2012 RL, 2003-2007 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2006 CR-V, 2003-2011 Element, 2007-2008 Fit, 2002-2004 Odyssey, 2003-2008 Pilot, and 2006-2014 Ridgeline vehicles. The vehicles are equipped with passenger frontal air bag…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal airbag inflator, free of charge. The recall began August 12, 2019. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are E5D and X5C.
Honda (American Honda Motor Co.) is recalling specific 2003 Acura 3.2CL, 2013-2016 ILX, 2013-2014 ILX Hybrid, 2003-2006 MDX, 2007-2016 RDX, 2002-2003 3.2TL, 2004-2006, and 2009-2014 TL, 2010-2013 ZDX and 2001-2007 and 2009 Honda Accord, 2001-2005 Civic, 2003-2005 Civic Hybrid, 2001-2005 Civic GX NGV, 2002-2007 and 2010-2011 CR-V, 2003-2011 Element, 2007…
Risk and remedy
Risk
An explosion of an inflator within the driver frontal air bag module may result in sharp metal fragments striking the driver, front seat passenger or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver's air bag inflator with an alternate inflator, free of charge. The recall began April 10, 2019. Honda owners may contact customer service at 1-888-234-2138. Honda's number for this recall is O41. Acura owners may contact customer service at 1-888-234-2138. Acura's number for this recall is U40.
Honda (American Honda Motor Co.) is recalling certain 2010-2012 Acura RL, 2010 Honda Element, and 2010-2013 Honda Ridgeline vehicles ever registered in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 16, 2018. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are U0H, and G0I.
Honda (American Honda Motor Co.) is recalling certain 2005-2006 Acura MDX and Honda CR-V vehicles, 2005-2011 Honda Element vehicles, 2005-2012 Acura RL vehicles, 2006-2012 Honda Ridgeline vehicles, 2007-2008 Honda Fit vehicles and 2005-2008 Honda Pilot vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the front passenger air bag inflator, free of charge. The recall bagan March 2017. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KD9 and KE0.
Honda (American Honda Motor Co.) is recalling certain model year 2003-2006 Acura MDX, 2005-2011 Acura RL, 2005-2006 Honda CR-V, 2003-2011 Element, 2007-2008 Fit, 2003-2008 Pilot, 2002-2004 Odyssey, and 2006-2011 Ridgeline vehicles originally sold, or that have ever been registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began June 27, 2016. Owners may contact Honda customer service at 1-888-234-2138. Honda's numbers for this recall are KA0, KA1, KA2, and KA3.
Honda (American Honda Motor Co.) is recalling certain model year 2001-2007 Accord, 2001-2005 Civic, 2001-2004 Honda Civic GX, 2003-2005 Honda Civic Hybrid, 2002-2006 CR-V, 2003-2011 Element, 2002-2004 Odyssey, 2003-2008 Pilot, 2006 Ridgeline, 2003 Acura 3.2CL, 2003-2006 Acura MDX, and 2002-2003 Acura 3.2TL vehicles. The affected vehicles are equipped with…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the driver's frontal air bag, the inflator could rupture with metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Honda will notify owners, and dealers will replace the driver frontal air bag inflator, free of charge. The recall began on July 1, 2015. Owners may contact Honda customer service at 1-888-234-2138. Owners may contact Acura customer service at 1-800-382-2238, select option 4. Note: Vehicles that have had their driver frontal air bag replaced previously as part of a recall remedy prior to September 12, 2014 need to have their air bag replaced under this recall as well. Vehicles that, on or after September 12, 2014, received a remedy for a prior driver frontal air bag inflator recall already received an inflator of a different design, and therefore are not included in this recall and do not require additional servicing. Note: This recall fully supersedes recalls 08V-593, 09V-259, 10V-041, 11V-260, 14V-351 and 15V-153. Honda's numbers for this recall are JQ9, JR0, JR1, JR2, JR3, JR4, JR5, JR6, JR7, and JR8.
Honda is recalling certain model year 2007 through 2011 Element passenger vehicles equipped with an accessory trailer hitch wiring harness. The wire that supplies power to the trailer turn signal lights was inadvertently switched with the stop lamp wire. As a result the turn signals only illuminate when the brake lamps are illuminated. This does not…
Risk and remedy
Risk
Without trailer turn signal illumination, the driver's intent is not communicated, potentially increasing the risk of a crash.
Remedy
Honda will notify owners, and dealers will repair the vehicles free of charge. The safety recall began on September 20, 2012. Owners may contact Honda at 1-800-999-1009.
Owner complaints
31 complaints4 involved a crash2 injuries
What owners report most
Latest complaints
- Suspension
The frame rusted and separated where the rear trail arm connects to the vehicle, so it cannot move.
- Structure › Body · Suspension · Wheels
The car is extremely rusty, so much so that the driver side trailing arm detached from the rest of the frame. The driver side rear suspension components are detached from the car. The car has been garage-kept since new, yet is extremely rusty. This is just like what the Canadian Honda Element recall was all about. The local dealership refused to do anything and said the car was out of warranty.
- Unknown or other
There is corrosion on the rear trailing arm and surrounding area. Also rust is forming on rear subframe / crossmembers and the front subframe. Over time, this can result in premature structural failure and catastrophic accident. It poses a serious safety risk. It affects the structural integrity of the suspension system. There’s no recall even though multiple complaints exist for similar make/model.
- Steering · Suspension · Vehicle speed control
Just like the same era's Honda CR-V (the Honda Element's sibling car with many of the same components), the undercarriage rust on my vehicle is excessive: as described in the same era Honda CR-V's NHTSA Recall (23V-228). Sections of my car’s rear frame are rusty. Just like with the CR-V, a recall…
Just like the same era's Honda CR-V (the Honda Element's sibling car with many of the same components), the undercarriage rust on my vehicle is excessive: as described in the same era Honda CR-V's NHTSA Recall (23V-228). Sections of my car’s rear frame are rusty. Just like with the CR-V, a recall for the rear frame corrosion first occurred in Canada and then in the US: see NHTSA Recall 23V-228’s chronology. The Honda Element's Canadian recall is as follows: "Transport Canada Recall - 2021024 – HONDA". As of today, there is no NHTSA recall for rear frame corrosion for Honda Elements. I am submitting this complaint for this car now, and also contemporaneously am submitting other complaints under different VINs for my other Elements with rust problems: every Honda Element that I have ever owned, even this Element for this complaint that I am submitting right now, that had spent its entire 14 year life as a New Mexico, Arizona, and Texas car has had rust problems. In other words, no matter what environment these Elements (which were made for the model years 2003-2011) are in, they corrode right away (within any factory warranties), and eventually become dangerous.
- Steering · Suspension · Vehicle speed control
Just like the same era's Honda CR-V (the Honda Element's sibling car with many of the same components), the undercarriage rust on my vehicle is excessive: as described in the same era Honda CR-V's NHTSA Recall (23V-228). Large sections of my car’s rear frame are completely missing, as shown in the…
Just like the same era's Honda CR-V (the Honda Element's sibling car with many of the same components), the undercarriage rust on my vehicle is excessive: as described in the same era Honda CR-V's NHTSA Recall (23V-228). Large sections of my car’s rear frame are completely missing, as shown in the photographs. My car is now undriveable. I had it towed to two Honda dealerships at my expense and both refused to even look at the car's rust, when I explicitly asked them to determine if the car was safe to drive. Niether dealership would confirm. Honda corporate cited that they were unable to assess the photographs that I sent to it because it does not physically inspect the cars. Honda corporate also insisted that it could not do anything about any dealership’s behavior as they are allegedly completely independent from Honda of North America. Honda corporate also looked up the history of my Hondas that I have owned and Elements that I still own and actually asked me, if I purchased them just to try to have Honda fix them for free. Just like with the CR-V, a recall for the rear frame corrosion first occurred in Canada and then in the US: see NHTSA Recall 23V-228’s chronology. The Honda Element's Canadian recall is as follows: "Transport Canada Recall - 2021024 – HONDA". As of today, there is no NHTSA recall for rear frame corrosion for Honda Elements. I am submitting this complaint for this car now, and also contemporaneous will submit less detailed complaints under different VINs for my other Elements with rust problems: every Honda Element that I have ever owned, even one that had spent its entire 14 year life as a New Mexico, Arizona, and Texas car has had rust problems. In other words, no matter what environment these Elements (which were made for the model years 2003-2011) are in, they corrode right away (within any factory warranties), and eventually become dangerous.
- Structure › Frame and members
The contact owns a 2009 Honda Element. The contact stated while driving approximately 20 MPH and approaching a stop sign, the contact observed a noise coming from the rear driver's side of the vehicle. The contact stated that when the vehicle came to a stop, he opened the driver's door and observed…
The contact owns a 2009 Honda Element. The contact stated while driving approximately 20 MPH and approaching a stop sign, the contact observed a noise coming from the rear driver's side of the vehicle. The contact stated that when the vehicle came to a stop, he opened the driver's door and observed the rear passenger’s side tire was sideways. The vehicle was towed to a body shop where the contact was informed that the frame of the vehicle near the trailing arm was rusted through and needed to be replaced. The manufacturer was not notified of the failure. The failure mileage was 152,403.
- Structure › Frame and members · Suspension · Tires › Pressure monitoring and regulating systems
The contact owns a 2009 Honda Element. The contact stated there was an extreme amount of rust on the vehicle. The contact stated that the trailing arm was corroded and had several holes. The TPMS warning light was illuminated. The vehicle was taken to the local dealer, who was unable to assist with…
The contact owns a 2009 Honda Element. The contact stated there was an extreme amount of rust on the vehicle. The contact stated that the trailing arm was corroded and had several holes. The TPMS warning light was illuminated. The vehicle was taken to the local dealer, who was unable to assist with the repairs. The vehicle was not diagnosed or repaired. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 274,000.
- Structure › Body
While driving the left rear wheel went sideway... looking underneath the Unibody had corroded to the point the left control arm separated from the car making it undrivable.... was told to not drive the car as it is not safe...
- Suspension
The driver side rear trail arm broke free from under the vehicle. Vehicle loses control much like having flat tires but more violent fish tailing. Vehicle is hard to control to pull over to shoulder. Photos were shown to local Honda dealer representative, Scott Guyette. (Gustman Honda in Appleton…
The driver side rear trail arm broke free from under the vehicle. Vehicle loses control much like having flat tires but more violent fish tailing. Vehicle is hard to control to pull over to shoulder. Photos were shown to local Honda dealer representative, Scott Guyette. (Gustman Honda in Appleton Wi). Scott Guyette at the dealership stated that he has seen this numerous times on the Honda Element and they are currently fixing Honda CRVs with the same issue. Email: (scott.guyette@gustman.com) He stated, don't tow it in, just send photos, which I did.
- Suspension
The contact owns a 2009 Honda Element. The contact stated the driver's side rear trailing arm detached from the vehicle while he was reversing at an undisclosed speed, and the vehicle stopped. There were no warning lights illuminated. The contact stated the failure occurred due to rust and…
The contact owns a 2009 Honda Element. The contact stated the driver's side rear trailing arm detached from the vehicle while he was reversing at an undisclosed speed, and the vehicle stopped. There were no warning lights illuminated. The contact stated the failure occurred due to rust and corrosion. The vehicle was towed to the dealer, who informed them they could not provide assistance, and then the vehicle was towed to the contact's residence. The vehicle was not diagnosed nor repaired. The manufacturer was made aware of the failure but did not provide any assistance. The approximate failure mileage was 125,000.
- Service brakes
A failed modulator. Service advisory A52 mushy brakes.
- Service brakes
Brake pedal too soft. Changed fluid, still the same.
- Service brakes
Spongy brake pedal goes almost to floor. have new rotors & pads and just had the system flushed and bled. No change in operation. still spongy and travel almost to floor. symptoms have existed for years.
- Service brakes
The brake pedal IS very soft and the brakes wear unevenly and clappers lock up even after replacement of pads roters, clappers, hoses,and bleeding brake system
- Vehicle speed control
TL* the contact owns a 2009 honda element. While parking the vehicle, the contact applied the emergency brake; however, the vehicle accelerated, drove over a curb, and crashed into a parked and unoccupied vehicle. There were no warning indicators illuminated. The air bags did not deploy. A police…
TL* the contact owns a 2009 honda element. While parking the vehicle, the contact applied the emergency brake; however, the vehicle accelerated, drove over a curb, and crashed into a parked and unoccupied vehicle. There were no warning indicators illuminated. The air bags did not deploy. A police report was filed and there were no injuries. The vehicle was towed to flow honda (2600 peters creek pkwy, winston salem, nc 27127, (888) 902-4024), but was not diagnosed or repaired. The manufacturer was not contacted. The failure mileage was approximately 154,000.
- Electronic stability control (esc)
The car accelerates incorrectly making it unsafe to drive. No matter how much gas you give it, the car will only go 15 mph. This can cause serious accidents, especially when entering a highway or turning left. The only warning you get IS a light on the dashboard. The problem on the computer test shows a p2138(37) code. App sensor a/b (throttle position to sensor.
- Air bags · Structure › Body
I was driving my honda element 2009 on a hwy in sc. The car was in motion and I had a green light and the car was moving forward when a woman who was driving in the opposite direction, made a left turn in the intersection failing to yield me the right of way. My car impacted her car on one side…
I was driving my honda element 2009 on a hwy in sc. The car was in motion and I had a green light and the car was moving forward when a woman who was driving in the opposite direction, made a left turn in the intersection failing to yield me the right of way. My car impacted her car on one side most likely the passenger side door and the collision was a frontal collision for my car. None of the frontal air bags in my vehicle were deployed. I hit my face on the windshield and I suffered a contusion/ light fracture on my left ribs and a head concussion. Car was purchased at a local dealership on 12/21/2016 was a used car that never was involved in a collision and had a clean title and clean history. According to honda dealership, the car belonged to one owner only in the past. The car was taken to the dealership to get the airbags replaced in february 2017. My biggest concern why the airbags were never deployed and protected me as they were supposed?
- Air bags
Takata recall : after servicing our honda vehicle today, there IS a warning not to allow a passenger in the front seat, and they cannot or will not repair/replace the dangerous airbag. why can they not disable it until they can replace or remove it? how can I use this auto for my family if it's dangerous?
- Air bags
TL* takata recall. The contact owns a 2009 honda element. The contact received notification of nhtsa campaign numbers: 16v344000 (air bags) and 16v320000 (air bags); however, the part to do the repair was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
- Power train
Interim shaft bearing broken - replaced by two different dealer service departments at 20K miles in june 2014 and also at 30K miles in dec 2015 with ordinary suburban driving
- Service brakes
Brake pedal IS soft and goes to the floor when the engine IS running. when the engine IS off the pedal IS hard and does not go to the floor.
- Air bags
TL* the contact owns a 2009 honda element. The contact stated that while at a stop sign to make a left turn, another vehicle crashed into the rear drivers side panel causing the vehicle to spin around three times in the opposite direction. The air bags deployed with force, metal fragments ejected…
TL* the contact owns a 2009 honda element. The contact stated that while at a stop sign to make a left turn, another vehicle crashed into the rear drivers side panel causing the vehicle to spin around three times in the opposite direction. The air bags deployed with force, metal fragments ejected from the air bag. The contacts glasses came off and a metal fragment pealed the contacts right eye lid causing excessive bleeding. The contact experienced bruises to the face and bruising from the seat belt. A police report was filed. The contact received further medical treatment due to the injuries sustained from the force of the air bags deploying. The vehicle was towed to a repair shop who remedied the body damages and the driver was unable to determine if the air bags were replaced. The vehicle was not inspected by a dealer. The manufacturer was not notified of the crash. The vehicle was included in nhtsa campaign numbers: 15v320000 (air bags) and 12v436000 (air bags). The approximate failure mileage was 3,260. updated 12/24/15.*jb
- Air bags
TL* the contact owns a 2009 honda element. The contact received notification of nhtsa campaign number:14v351000 (air bags); however, the part needed to repair the vehicle was unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was notified. The contact had not experienced a failure.
- Suspension
TL* the contact owns a 2009 honda element. The contact stated that she took her vehicle in for a routine check up but was informed that the cover of both front ball joints were missing and that both the ball joints and the control arms needed to be replaced. The vehicle was not repaired. The manufacturer was notified. The failure mileage was 40,000.
- Engine and engine cooling
Air conditioning condenser - cut on air conditioning after winter, would not cool. taken to local dealer, bill gatton honda in bristol, tn. told road debris through condenser, not covered under 3 yr/36,000 mile warranty (we had also purchased extended 100,000 mile warranty). this vehicle IS…
Air conditioning condenser - cut on air conditioning after winter, would not cool. taken to local dealer, bill gatton honda in bristol, tn. told road debris through condenser, not covered under 3 yr/36,000 mile warranty (we had also purchased extended 100,000 mile warranty). this vehicle IS driven lightly around town, no high speed highways (interstates, etc.). aware that honda has had class action litigation for identical complaint with other honda vehicles (odyssey van, acura, civic, etc.), therefore, it IS obvious that this IS a design in the automobiles, and should be covered under the manufacturer warranty. second repair that has been denied under new vehicle warranty. other denied damage IS headliner pulled away on driver's side. repair cost, with honda part, IS atrocious; warranty IS voided IS use off market part. consumer caught between rock and hard place. *tr
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016 four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016 four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The investigation now includes all manufacturers and vehicles known to be affected at this time.ODI's investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
- Air Bag Inflator Rupture
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and…
The Office of Defects Investigation (ODI) opened PE14-016 in June 2014 based on six inflator rupture incidents involving consumer owned vehicles produced by five vehicle manufacturers.All six vehicles were operated in Florida or Puerto Rico at the time of the rupture and for the majority of their service life, and were equipped with inflators produced by Takata, a tier-one supplier of automotive air bag systems.During the course of PE14-016, ODI determined that five additional vehicle manufacturers used inflators of a similar design and vintage also supplied by Takata. No evidence of field failures was found in vehicles produced by these five additional manufacturers.Nonetheless, at ODI's insistence, all 10 vehicle manufacturers initiated a regional recall within approximately two weeks of the opening of the investigation.The regions recalled initially included Florida, Puerto Rico, Hawaii, and the U.S. Virgin Islands, areas with consistently high absolute humidity and climatic conditions believed to be a significant factor in the inflator ruptures.As part of the recall actions, inflators removed from remedied vehicles are to be returned to Takata for testing.Takata's initial test results on passenger inflators from remedied vehicles indicated a much higher than anticipated rupture frequency for inflators returned from Florida.Accordingly, ODI requested all 10 manufacturers expand the regional recalls for passenger inflators to include other geographic areas where high absolute humidity conditions exist, including the Gulf States and other coastal areas.Takata's testing of the passenger inflators to date continues to indicate this geographic area as having the highest risk, with no ruptures occurring from inflators returned from outside the expanded recall regions.During PE14-016, four additional passenger inflator field events occurred, all in vehicles from the same expanded geographic region.Also during PE14-016, four additional driver inflator field events occurred including two in vehicles from regions not known for high absolute humidity, specifically California and North Carolina.Accordingly, ODI requested all five of the affected vehicle manufacturers currently using the subject Takata driver inflators expand to nationwide recalls.Significantly, neither of the affected vehicle manufacturers or Takata provided any explanation to account for these two driver air bag inflator ruptures outside the area of high absolute humidity.Takata testing of returned driver inflators indicates a lower rupture frequency as compared to passenger inflator testing.All test ruptures reported by Takata to date have occurred on inflators returned from high absolute humidity areas.The PE is now closed/upgraded to an Engineering Evaluation (EA15-001) to include all manufacturersand vehicles known to be affected at this time.ODI's EA investigation will focus on, among other things, root cause analysis, other potential defect consequences, identification of affected vehicles scope, and adequacy of the remedy.The recalls related to this PE are: 14V343, 14V344, 14V348, 14V351, 14V353, 14V655, 14V700, 14V701, 14V752, 14V763, 14V770, 14V773, 14V787, 14V802 and 14V817.The number of vehicles affected are an estimate since some vehicles may have both the driver and passenger side inflators recalled. The five ODI reports cited above can be reviewed online at http://www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the following identification numbers: 10537899, 10568848, 10585224, 10605877, 10651492
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10237952Service News - The navigation clock and date are incorrect. This is due to a limited GPS receiver Capacity resulting in a rollover of the internal chip memory; the rollover occurred on January 1, 2022, at 12:00AM local time.
- 10213538Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passenger's airbag inflator only.
- 10206994ServiceNews Article - The clock shows the incorrect time. This issue is due to a limited GPS receiver capacity resulting in "rollover" of the internal chip memory; the "rollover" will occur on January 1, 2022 at 12:00AM local time. As a result, the navigation date and time will be incorrect.
- 10186009"Service Bulletin - There are several A/C leak detection tools available. -Refrigerant Gas Leak Detector -Ultrasonic Leak Detector -Leak Dye"
- 10172568Service Bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passenger's airbag inflator only.
- 10172564Service Bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement driver's airbag inflator only.
- 10141174Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passengers airbag inflator only.
- 10141171Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passengers airbag inflator only.
- 10141168Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects in the replacement front passengers airbag inflator only.
- 10139568Service bulletin - This bulletin is a notification of a class action settlement relating to airbag inflators. American Honda is offering a Customer Support Program (Warranty Extension) to cover any manufacturing defects to the replacement driver's airbag inflator only.
- 10128880Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128879Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128878Dealer message - The recalls announced today involve driver?s or passenger?s front airbag inflators, which in a crash may deploy with too much pressure, causing the inflator casing to rupture and eject metal fragments that could injure or kill vehicle occupants. While two of the recalls only affect vehicles sold or ever registered in certain states/territories, vehicles that currently are registered in other states/territories may also be affected if they were at one time registered in the affected states/territories.
- 10128578Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. At this time, affected VINs have not been determined.
- 10128577Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. At this time, affected VINs have not been determined.
- 10128564Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that over time may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material possibly causing injury or fatality to vehicle occupants.
- 10128559Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of July 23, 2014, affected VINs have been identified, and service bulletins 14-040, Safety Recall: Accord, Civic, and Others ? Front Passenger?s Airbag Inflator Can Be Over-Pressurized, 14-045, Recall: Front Driver?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity Recall, and 14-046, Recall: Front Passenger?s Airbag Inflator May Produce Excessive Pressure After Long-Term Exposure to High Absolute Humidity have been posted to ISIS. However, due to the large number of affected units, American Honda is still in the process of populating the VIN status inquiry function on iN, which is expected to take several days. When this process is complete, American Honda will notify all dealers again via iN message. Until that time, the existing acknowledgement procedure must be used for all potentially affected vehicles.
- 10128531Dealer message - On Monday, June 23, 2014, American Honda announced three recalls for various 2001-11 Honda models. As of August 4, 2014, affected VINs have been identified, and VIN status inquiry has been updated.
- 10124983Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10118840Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants. Affected Honda vehicles were originally sold and/or registered in the following geographic locations: Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, and the U.S. Virgin Islands.
- 10118182Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10118031Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver?s airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants. Affected Honda vehicles were originally sold and/or registered in the following geographic locations: Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, and the U.S. Virgin Islands.
- 10115219Service bulletin - For any TPMS-related warranty repairs, all recorded DTCs must now be entered into the warranty claim. Make sure your repair order includes those DTCs.
- 10115209Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108579Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108532Service bulletin - Certain Honda vehicles operated in areas known for high absolute humidity and high heat may contain a driver's airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants.
- 10108461Customer letter - please be aware, we have a national safety improvement campaign and recall under way to repair airbag inflators, at no cost to you, in certain honda and acura vehicles (listed below). To see if your vehicle needs immediate attention, please check its recall status.
- 10108445Customer letter - please be aware, we have a national safety improvement campaign and recall under way to repair airbag inflators, at no cost to you, in certain honda and acura vehicles (listed below). To see if your vehicle needs immediate attention, please check its recall status.
- 10108257"Service bulletin - certain honda vehicles operated in areas known for high absolute humidity and high heat may contain a drivers airbag that, over time, may be affected by exposure to the humidity, which could produce excessive internal pressure upon deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10108232"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even if the vehicle was repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10108186"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even if the vehicle was repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10100701"Service bulletin - in certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10100421Service bulletin - navigation system information.
- 10099910Poster of listed honda vehicles affected by an airbag inflator recall - spanish.
- 10099909Poster of listed honda vehicles affected by an airbag inflator recall - english.
- 10099821"Service bulletin - american honda consolidated the previous airbag inflator campaigns into this current bulletin based on decisions made by nhtsa. Do an in vin status inquiry and, if indicated, repair the vehicle even though the vehicle may have been repaired under a previous campaign. In certain vehicles, the drivers (front) airbag inflator could produce excessive internal pressure during airbag deployment. If an affected airbag deploys, the increased internal pressure may cause the inflator casing to rupture. Metal fragments could pass through the airbag cushion material, possibly causing injury or fatality to vehicle occupants."
- 10098946"Service bulletin - the mil comes on with one of these dtcs: p2646/p2651 (rocker arm oil pressure switch circuit low voltage). P2647/p2652 (rocker arm oil pressure switch circuit high voltage). Note: the symptom may be intermittent and you may not be able to duplicate it after clearing the dtc. The rocker arm oil pressure switch may fail intermittently."
- 10087261Service bulletin - all of the listed vehicles have a type 4 immobilizer system that disables the vehicle unless a programmed ignition key IS used. The type 4 system IS different than previous systems in that the transponder ID code in the key IS a rolling-type code instead of a fixed code. In this service bulletin, a programmed ignition key refers to a transponder-type key that has been cut to fit the ignition switch and whose transponder ID code IS recognized by the immobilizer system. If you try to start the engine without a programmed ignition key, the engine cranks, but it does not start.
- 10086381Us virgin islands newspaper advertisements to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
- 10086308Text messages sent to remind owners of the takata recall and to schedule an appointment at their earliest convenience.
Every Honda Element model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.