1999 Infiniti I30
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Infiniti › I30 › 1999
These records cover every 1999 Infiniti I30. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Owner complaints
26 complaints2 involved a crash4 involved a fire1 injuries
What owners report most
Latest complaints
- Air bags
The ‘Air Bag’ light stays on at all times. Its been like this for over 10 years. I’ve called my local Infiniti dealer, they said they cannot replace the Takata airbag until NHTSA identifies this model in a national recall. I’m afraid the airbag may not properly deploy or deploy inadvertently, and…
The ‘Air Bag’ light stays on at all times. Its been like this for over 10 years. I’ve called my local Infiniti dealer, they said they cannot replace the Takata airbag until NHTSA identifies this model in a national recall. I’m afraid the airbag may not properly deploy or deploy inadvertently, and cause serious injury or death of driver or occupants. Please do the right thing and add the 1999 Infiniti I-30 to recall list. Thanks 🙏🏼
- Air bags
Takata recall I have a infiniti I30T it has the air bag light just flashing I have brought it in and they suggested I should contact you I don't have a error code for you but if you would want more info feel free to contact me at [xxx]. information redacted pursuant to the freedom of information act (foia), 5 u.s.c. 552(B)(6).
- Engine · Power train · Unknown or other
The car turns off but I want complete service
- Fuel system, gasoline
2/21/21, turning on the ignition created a severely rough idle, the auto could not maintain "running status", a severe fuel odor ensued with blue-black smoke billowing out of the exhaust pipe. towed to the nissan dealer in shingle springs, ca. Per the dealer evaluation: #2 fuel injector…
2/21/21, turning on the ignition created a severely rough idle, the auto could not maintain "running status", a severe fuel odor ensued with blue-black smoke billowing out of the exhaust pipe. towed to the nissan dealer in shingle springs, ca. Per the dealer evaluation: #2 fuel injector replacement and "o" rings. The mechanic found metal shavings on the fuel injector and it continued with blue-black smoke per the exhaust while running. May require new fuel sensor if this does not resolve. we purchase all our fuel from the folsom, ca. Sams club. 2/11/14 was the date of the last gas purchase. 2/20/14 we attempted to purchase fuel for another vehicle but found the station closed during inspection by a company called tankology. could there be a relationship with metal shavings in the fuel, consequently creating this break down? to date we have spent $624.00 in repairs, $150.00 in car rental. we would appreciate your evaluation and response. thank you. *tr
- Steering · Structure › Frame and members › Underbody shields · Suspension
I took my well-maintained, garaged 1999 infiniti I30 to the mechanic after noticing the handling getting sloppy and severe inner tire wear. upon inspection, he informed me that the front core support (the box beam frame member that extends the width of the car and supports the radiator) was rusted…
I took my well-maintained, garaged 1999 infiniti I30 to the mechanic after noticing the handling getting sloppy and severe inner tire wear. upon inspection, he informed me that the front core support (the box beam frame member that extends the width of the car and supports the radiator) was rusted through. the corrosion IS severe to the point that the sides of the beam are eaten away over 1/3 to 1/2 the length. in places, all that IS left supporting the radiator IS the top plate. the center support bar that holds the front end of the motor in place IS supposed to be bolted to the bottom of the beam, but because of the corrosion, it IS now hanging cantilevered. the car IS not safe to drive with the motor inadequately supported. Relative to the rest of the car, the severe corrosion IS localized to a 2-3 foot section of the frame (as if there IS something causing the corrosion to accelerate in this particular area). properly manufactured structural steel should not disintegrate like this. *tr
- Air bags
Reclined drivers seat which activated "air bag" warning light continuously flashing. This IS a serious safety flaw which needs to be fixed by the manufacturer. Unknown whether air bag still works and very bright flashing indicator causes serious distraction while driving especially at night. Numerous reports that this IS a common problem on nissan maxima and infiniti I30. *tr
- Air bags
I'm the second owner of a 1999 infiniti I30. I've been dealing with the airbag light several times. I'm concern that one day the will pop and hurt me or my family. *tr
- Electrical system › Alternator/generator/regulator
Tl*the contact owns a 1999 infiniti I30. The contact was driving when he noticed smoking emitting from the hood into the vehicle. The vehicle was taken to a local mechanic who informed the contact that the diode ignited, causing a fire in the alternator. The vehicle had not been repaired. The…
Tl*the contact owns a 1999 infiniti I30. The contact was driving when he noticed smoking emitting from the hood into the vehicle. The vehicle was taken to a local mechanic who informed the contact that the diode ignited, causing a fire in the alternator. The vehicle had not been repaired. The contact called the manufacturer who stated his vehicle was not included in recall 99v129000 (electrical system: alternator/generator/regulator). The current and failure mileages were approximately 110,000. updated 11/03/10. *Lj
- Electrical system
Car was driven short distance (approx. 2 miles), parked and turned off. within 2-5 minutes I had to put something in car and noticed smoke flowing out of grill area, and popped the hood, and noticed orange flame in alternator. fire dept. Was called to scene, and a report IS available. at time of…
Car was driven short distance (approx. 2 miles), parked and turned off. within 2-5 minutes I had to put something in car and noticed smoke flowing out of grill area, and popped the hood, and noticed orange flame in alternator. fire dept. Was called to scene, and a report IS available. at time of complaint, car IS in shop w/ a private mechanic due to infiniti's refusal to assist in matter, and cost of repair IS yet undetermined. *Tr
- Structure › Body › Hood
1999 infiniti I30 hood shocks failed almost slamming on consumer fingers. *ts the consumer contacted the manufacturer and asked them to send a replacement hood shock. the manufacturer refused to honor the consumers request because the hood shock on the consumer's vehicle was not recalled. *nm
- Air bags
Dt: contact stated the air bag light illuminated. the problem has been remedied twice, but within 6 months to a year the light came back on. the dealer did know why the light kept coming on. They did replace a module assembly for side the air bag, this did fix the light, but after approximately…
Dt: contact stated the air bag light illuminated. the problem has been remedied twice, but within 6 months to a year the light came back on. the dealer did know why the light kept coming on. They did replace a module assembly for side the air bag, this did fix the light, but after approximately 6 months, the light came back on. the dealer stated if the air bag light was on the air bag may not deploy in the event of an accident. consumer has contacted the manufacturer, but they did not resolve the problem. *Ak *jb
- Vehicle speed control
While driving my wife's 1999 infinit I30, I experienced an unexpected sudden acceleration when slowing to enter a parking space. I immediately stood on the brakes and put the car into neutral with the engine racing. if I had not reacted quickly, I would have crashed into the parked car ahead of…
While driving my wife's 1999 infinit I30, I experienced an unexpected sudden acceleration when slowing to enter a parking space. I immediately stood on the brakes and put the car into neutral with the engine racing. if I had not reacted quickly, I would have crashed into the parked car ahead of me. I stopped within a few inches of that car. this has not occured before, accrding to my wife who was the primary driver of the infiniti. the car has 92,000 miles on it.*ak
- Air bags
1 no event led to any failure. 2 air bag warning light blinks constantly for no reason distracting driver. 3 nothing done by manufacturer on defective safety device . *ak
- Electrical system › Ignition › Module · Engine and engine cooling · Engine and engine cooling › Exhaust system › Emission control · Service brakes, hydraulic › Antilock/traction control/electronic limited slip
ABS /engine warning light illuminated while driving. Dealership was notified, but did not resolve the problem. *Ak car missing, backfiring and shaking. Three warning lights came on. Also, ABS failure. Car failed required emission test. ignition coil replaced. *ak
- Air bags › Frontal
While driving on the highway at 50 mph consumer's vehicle was side swiped by a semi-trailer on the driver's side. Upon impact, the vehicle crashed into sand bags and other construction material on the side of the highway. None of the frontal airbags deployed. *ak *sc
- Air bags › Frontal › Sensor/control module
Air bag warning light flashed, indicating a failure in the air bags. vehicle was taken to the dealership, who indicated that the air bag sensor was bad, and needed to be replaced. The vehicle had never been in an accident.*ak the dealer would not perform the repairs under warranty. the consumer paid $600 to correct the problem and IS requesting reimbursement from the manufacturer. *nm
- Air bags › Frontal › Sensor/control module
I have a 1999 infinity I30, which has only 36000 miles on it, there was no accident or any repair done on tjis car, but the air bag sensor came on just like that and the dealer wants about $1250.00 to repair it.
- Electrical system › Alternator/generator/regulator
While the vehicle was idling a high pitch noise was heard then smoke began flowing from under the hood. the consumer opened the hood and saw the alternator on fire. *Ak *nlm
- Fuel system, gasoline › Fuel injection system › Fuel rail
While at a stop, gas fumes collected and seeped into the passenger cabin. the dealer replaced the fuel valve and evaporator canister, but the problem still recurred.*ak check engine light came on and the gas pump kept shutting off when filling even though tank was not full. smell possibly came from fuel injectors on rear bank. *tt *jb
- Air bags › Frontal › Sensor/control module
Consumer called complaining about having problem with the air bag light on panel continually flashing. Dealer has been notified and will $1,000 to fix the problem. Please provide further information. Ts *tr
- Air bags
Two air bag mechanisms failed and were replaced. The consumer IS asking for refund of the repair cost from the dealer. *Yh
- Air bags
Infiniti saw no owner damage to airbag. airbag never deployed. does infiniti have a problem with 90,000+ mileage vehicle initiating air bag warning? car has been maintained regularly-infiniti stated that since they did not do the maintenance, the airbag IS failing! *ak
- Air bags
Air bag light on panel continually flashing. *ak
- Seats › Front assembly › Head restraint · Structure › Body
Water seeps inside of vehicle from beneath of vehicle. Also, rear seam in the seat of vehicle IS cracked. dealer jusst keeps on fixing problem, but there IS no remedy. *ak
- Seat belts › Front › Anchorage
Seatbelt harness entrapped by seat control buttons, results in driver being dangerously and unexpectedly pushed into steering column. Reported to mfr who could not remedy and would not release from lease obligation. New 2000 model redesigned with controls well away from seatbelt base, implying full…
Seatbelt harness entrapped by seat control buttons, results in driver being dangerously and unexpectedly pushed into steering column. Reported to mfr who could not remedy and would not release from lease obligation. New 2000 model redesigned with controls well away from seatbelt base, implying full knowledge of dangerous defect in previous versions. Am interested in other similar complaints as I seek legal remedy with my lease situation. Thank you. *ak
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10232646REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232645WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232644WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10192693SERVICE INFORMATION Windshield "foreign material" that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool. * Most any foreign material on the surface of the Windshield can be cleaned off by using #0000 super fine steel wool. >The #0000 grade super fine steel wool can be found in most hardware stores. Please see this bulleitn for further details.
- 10192514SERVICE INFORMATION Changes or modifications to the front seat assembly trim materials may affect the proper operation of the Front Seat-Mounted Side-Impact Supplemental Air Bags and Passenger Occupant Classification Sensor and could result in serious personal injury or death. Infiniti STRONGLY RECOMMENDS AGAINST making any change to seat trim materials from the factory equipped condition. This specifically applies to replacing the seat trim with non-factory materials; adding leather/cloth seat covers, seat pads, or seat storage pouches, etc. around or over the seat back and the passenger seat cushion. See this bulletin for further detail.
- 10192314SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.
- 10192235Infiniti Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Infiniti design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Infiniti's standards. Infiniti Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Infiniti most strongly discourages, and recommends that these wheels NEVER be subjected to, aftermarket chroming. See this bulletin for further details.
- 10192219SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake issues fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel, or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake issue based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific issue. See this bulletin for further details.
- 10192218If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incidents. - Brake judder: A brake pedal pulsation and/or steering wheel shimmy when braking that occurs when there is too much thickness variation of the brake rotors (see ITB00-024). See this bulletin for further detail.
- 10192191As part of an enhanced emissions test for Inspection & Maintenance (I/M), some States may require the System Readiness Test (SRT) status be checked. - The SRT is used to indicate whether the engine control module (ECM) has completed self diagnosis of major emissions systems and components. - In these instances the State may require completion of the SRT before permitting the emissions inspection to proceed. Refer to this Bulletin for further details.
- 10192146SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement. - A strut or shock absorber that should be replaced due to rod resistance/noise issues. See this bulletin for further detail.
- 10190150INFINITI; FRONT SONAR PARKING SENSOR SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10160176EXTERIOR CLEANING INFORMATION SERVICE INFORMATION When cleaning the exterior of an Infiniti vehicle, damage may occur when using a cleaner with too high of an alkaline concentration. - Always refer to the Appearance and care section of the related owner?s manual. - Not all cleaners are created equal. - Many cleaners come in concentrated form. - Alkaline cleaners (cleaners with a high pH value) can cause spots on paint and trim when not used as directed. - Some commercial car washes use cleaners with a high pH value. - When using cleaners that meet the conditions defined in the Appearance and care section, be sure to carefully follow the cleaner?s directions. - When finished cleaning/washing, rinse thoroughly with clean water. IMPORTANT: Damage to paint, glass, bright metal, or any other exterior surface caused by using improper cleaning products is not covered under warranty. Always refer to the Paint Incident Identification Manual (PIIM) and Assurance Products Reference Manual (APRM). Follow the guidelines in the PIIM and APRM for non-warrantable exterior body, glass, or painted surface quality issues. To access the PIIM and APRM, login to nnanet.com: - For the PIIM, select: MY LINKS > Warranty > Paint Incident Identification Manual - For the APRM, select: MY DOCUMENTS > Warranty > APRM See further information in this bulletin.
- 10149809PLASTIC INTERIOR TRIM PROTECTIVE COVERING REMOVAL SERVICE INFORMATION Vehicles are delivered with plastic interior trim protective covering on the front and rear seats, front and rear door panel finishers, steering wheel, and sun visors (see examples on page 2). When removing the protective covering, care must be used to avoid scuffs, scrapes, cuts, and other abrasive contact to interior trim components. DO NOT use sharp objects like razor blades, box cutters, knives, etc. when removing the plastic interior trim protective covering. IMPORTANT: All soft trim described in this bulletin is on automatic return to NNA. Any trim found damaged in the way described in this bulletin will be charged back to the dealer.
- 10149806TRANSMISSION & ENGINE AUTOMATED DATA COLLECTION AND DIAGNOSTIC REPORTING SERVICE INFORMATION To support proper diagnosis and to promote Fixed-Right-First-Time ? Infiniti may review CONSULT-III plus (CIII plus) data relating to vehicle operation and function to help with vehicle diagnosis and diagnostic validation. IMPORTANT: For transmission/engine repair or replacement, retailers are required to connect C-III plus and perform ?Diagnosis (All Systems)?. Performing C-III plus ?Diagnosis (All Systems)? is also required prior to contacting any Infiniti call center (i.e. TECH-LINE, PCC, or WCC) for diagnostic support or claim preauthorization. NOTE: For additional information regarding Automated Vehicle Data Collection, refer to IWBI/18-019. To support Automated Vehicle Data Collection, your C-III plus must have the Diagnosis result reporting function-Setting turned ON. If Diagnosis result reporting function-Setting is OFF: - It may cause dealer consideration for Audit or the Anomalous Repair Control (ARC) program, where applicable. - It may result in a repair being non-warrantable. Refer to the Service Procedure on the next page to confirm your C-III plus ?Diagnosis result reporting function-Setting? is turned ON.
- 10149803Infiniti USA Electronic Field Communication Subject: Takata Completion Objectives for Q3 INFINITI is continuing to ask its retailers to urgently help increase customer participation in the Takata recalls to help it achieve 100% customer recall participation for the following vehicles: ? 2001 I30 ? 2002-04 I35 ? 2003-08 FX ? 2002-03 QX4 ? 2006-10 M Sedan INFINITI expects to upload the next refreshed owner list to DBS within the next week. We will also be reassigning VINs to retailers based on information changes. We didn?t reassign any VINs in Q2 to avoid any mid-quarter objective impact. If VINs were repaired out of network, the retailer/region with the original assignment received credit for the repair. This is an extremely serious safety issue and INFINITI is taking significant and unprecedented steps to increase client recall participation but it needs retailer help to achieve its remedy goals. A separate communication will be released later this month informing regional personnel of the requirements for bonus payout in Q3 and Q2 results. The Q3 objective is based on the average number of repairs in Q2 multiplied by the number of service days in Q3 (Mon-Sat minus any holidays). Retailer engagement is critical with this effort. It is a company-wide responsibility to make it a priority to replace these dangerous airbag inflators in affected vehicles. Further, increasing recall participation represents significant gross profit opportunity for our retailers.
- 10149802Infiniti USA Electronic Field Communication Subject: Retailed Vehicle Open Campaign Report Lists Updated The lists for each retailer?s Retailed Vehicle Open Campaign Report has been updated today in DBS. We made our best effort to reassign vehicles to retailers based on the most recent owner information we received. The complexity of filtering out brokers (banks, salvage yards, and insurance companies) and reassigning VINs based on updated owner information affected over 123K records between INFINITI and Nissan, so we are unable to summarize the changes at a regional or retailer level. We suggest the retailers download their lists and have their outbound call centers compare information if necessary. If you have questions, please let us know. Additionally, we will have some enhancements coming in DBS effective November 17, 2018: Owner Data Updates (NNA side): 1. VIN, Campaign Code, and Source are the unique fields 2. Compare all fields except Remove Flag and Comments to see if there is a difference. a. If there is same VIN, Camp ID, and Source and all other fields are also the same then the record will be updated without changing Remove Flag and Comment field b. If there is same VIN, Camp ID, and Source and any other field is different, then the record will be inserted, in this case Remove Flag and Comment field will be blank as this is new record. The remove flag is being removed so the retailer will understand the information they previously flagged for removal has been updated and should be tried again before reapplying the removal flag. c. The retailer benefit of A & B above is duplicate records for the same VIN, Camp ID, and information source with the same customer contact information will no longer display in DBS on the Retailed Vehicle Open Campaign Report.
- 10145541DBS Enhancement: Retailed Vehicle Open Campaign Report INFINITI announced the availability of a new DBS enhancement tool to the Service > Campaign screen: Retailed Vehicle Open Campaign Report on July 9, 2018, which identifies owner contact information for specific campaigns. Currently, only Takata campaign owner lists are available. The following personnel will have access to this tool: - Retailer: Dealer Principal, Executive Managers, General Managers, Parts/Service Managers, and/or Parts/Service Directors - Regions: Regional Aftersales Manager (RAM), Regional Operations Managers (ROM), Fixed Operations Manager (FOM), Dealer Operation Managers (DOM), Regional Service Operation Managers (RSOM), and Client Experience Managers (CEM) The report can be viewed on screen or exported to Microsoft Excel and identifies the following: - VIN - Campaign ID & Campaign Description - Model & Model Year - Data Source o Up to three data sources can be provided for each VIN - RO Info: If this VIN has visited an Infiniti retailer anywhere in the U.S. within the last twelve months, the RO information will be displayed. - Campaign Mailing List: This is DMV data for the VIN listed - Marketing List: If an owner is on your marketing list, their contact information from that list will be displayed here. DMV data is not used for marketing list owner information. - Contact Name - Last Name/First Name & Address (City, State, Zip) - Phone (1-3) & Email (1-3) - Remove Flag o This defaults to ?N? unless the retailer or INFINITI USA flags this VIN for removal. o The removed information will still show on the DBS screen and exported report, but can be filtered on the exported file to only display the records with ?N? in this column.
- 10144484NEW PAINT GUARD FILM REMOVAL INFORMATION This bulletin applies only to new, unsold vehicles with Paint Guard Film in Dealer Stock. This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin.
- 10136636DBS Enhancement: Custom VIN Campaign Report INFINITI is pleased to announce the availability of a new DBS enhancement to the Service > Campaign screen: Custom VIN Campaign Report. The tool identifies open campaigns on a customized VIN list loaded into DBS for INFINITI and Nissan vehicles. The following personnel will have access to this tool: - Retailer: Executive Managers, Service Managers, and/or Service Directors - Regions: Regional Aftersales Manager (RAM), Area General Manager (AGM), Fixed Operations Manager (FOM), Regional Service Operation Managers (RSOM), and Retailer Technical Specialist (DTS) The VINS can be loaded individually or up to 10,000 VINs at a time. If you have more than 10,000 VINs, each incremental VIN file of 10,000 or less VINs will need to be loaded prior to selecting the Check For Open Campaigns option. The report can be viewed on screen or exported to Microsoft Excel and will identify the following for each VIN loaded into the tool: - Open Campaigns (ID and description) - Model Code, Model, and Model Year - Current Repair Status Blank: Repair order (RO) has not been opened yet Unrepaired: RO has been opened for the campaign, but not closed or submitted o Repaired: RO for the campaign has been closed and a warranty claim has been submitted - Current Claim Status o Blank: RO still open o Unsubmitted: A warranty claim for the campaign repair has not been submitted o Submitted: A RO has been closed and a campaign warranty claim has been submitted for payment o Suspended: The campaign warranty claim has suspended for one or more errors o Rejected: The campaign warranty claim has been denied for some reason (by retailer or NNA) o Paid: A campaign warranty claim has been submitted and paid by NNA, but the vehicle has not yet been removed from the NNA open campaign vehicle table - Stop Sale Applicability - Parts Restriction Applicability (If restricted, SVC order must be used to acquire parts)
- 10129111REDUCED VEHICLE LOAD CAPACITY LABEL (REGULATORY REQUIREMENT) This bulletin applies to vehicles equipped with dealer installed or VPC installed accessories. SERVICE INFORMATION The National Highway Traffic Safety Administration (NHTSA) requires that any automobile dealer that installs accessories on a vehicle prior to first retail sale must install a special label (?reduced capacity label?) on that vehicle if the total weight of all accessories on that vehicle exceeds 1.5 percent of the vehicle?s gross vehicle weight rating (GVWR) or 100 pounds, whichever is less. This includes accessories that the dealer installs (dealer installed factory accessories and dealer installed aftermarket accessories), and accessories installed at the Vehicle Processing Center (VPC) prior to the vehicle being delivered to the dealer. IMPORTANT: Failure to comply with this requirement may result in penalties imposed by NHTSA. Follow the instructions in this bulletin to help meet these requirements.
- 10127465WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended to apply to the latest models and model years, and warranty information on page 2 has been updated. No other changes have been made. Please discard previous versions of this bulletin.
- 10127462WINDSHIELD CRACKING This bulletin has been amended to apply to the latest models and model years. Also, warranty information on pages 1 and 8 has been updated. No other changes have been made. Please discard previous versions of this bulletin.
- 10127461BRAKE NOISE/JUDDER/PEDAL FEEL DIAGNOSIS AND REPAIR This bulletin has been amended to include vehicles built up to the publication date. Also, tips for using the ProCut? brake lathe were added on page 8, and a Brake Noise Diagnostic Worksheet was added on page 10. Please discard previous versions of this bulletin.
- 1011921012 VOLT BATTERY STORAGE AND MAINTENANCE FOR NEW VEHICLES IN RETAILER INVENTORY This bulletin has been amended throughout. Please discard all previous versions of this bulletin.
- 10051765Infiniti: lock/unlock request button on outside door handle outside door handle does not respond. Lock/unlock request button located on outside door handles of vehicles can be disabled (or enabled) through either the "comfort & conv" settings of the audio/visual/navigation system or through the "combination meter settings" depending on the vehicle model, year, and trim level.
- 10044526Infiniti: reprogramming electronic control unit (ecu) on all qualifying vehicles. No models listed. Model years 1998-2013.
- 10032524Infiniti: vent control valve replacement. No applied vehicles affected: all models; no model years listed.
- 10032305Infiniti: srs precautions during service. Included in the restraints section of the electronic service manual (esm) for each vehicle IS information necessary to service the supplemental restraint system (srs) safely. Improper maintenance, including incorrect removal and installation of the srs, can lead to a serious injury or death caused by unintentional activation of the srs. No model or model years listed. Updated 2/21/14.
- 10031304Infiniti: tire pressure monitoring system (TPMS) warning light on/blinking. No models or model years listed. Updated on 08-11-2011.
- 10030145Infiniti: electronic control unit damage can result from improper battery connection. The battery IS required to stay connected when the engine IS running. No model years listed.
- 10003519Front seat belt latch plate retaining button missing. Various models including the 2004 G35.
- 628735Front seat belt latch plate retaining button missing.
- 623707Information regarding a new tool set that has been released as an essential tool for adjusting valve clearances. *Slc
- 623696Some vehicles may experience a malfunction indicator lamp on with dtc p1320 stored in the ecm due to the ignition coil. *Slc
- 623141Information regarding essential tool; valve shim lifter set, j-45074.
- 623134Information regarding malfunction indicator lamp on with dtc p1320 stored due to ignition coils(s).
- 623102Information regarding essential tool: inner tie rod wrenches.
- 623066Information regarding trunk popping open while driving.
- 618437A condition may exist where the engine will not start or intermittent no start condition IS experienced. This bulletin describes and introduces new features of the vehicle immobilizer system / nissan anti-theft system (ivis / nats).
Every Infiniti I30 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.