2007 Infiniti M35
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Infiniti › M35 › 2007
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2007 Infiniti M35. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
5 recalls name the 2007 Infiniti M35. Newest first.
Nissan North America, Inc. (Nissan) is recalling certain air bag inflator replacement service parts that may have been installed as part of a theft or collision repair. The parts include certain passenger-side air bag inflators designed to fit Infiniti 2002-2003 QX4, 2006-2010 M35 and M45; Nissan 2001-2003 Maxima, 2002-2006 Sentra, and both driver and…
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Dealers will inspect and replace the inflators as necessary, free of charge. Owner notification letters are expected to be mailed September 14, 2022. Owners may contact Nissan's customer service at 1-800-867-7669.
Nissan North America, Inc. (Nissan) is recalling certain 2001-2003 Maxima, 2002-2006 Sentra, 2002-2004 Pathfinder, 2007-2011 Versa Sedan and Versa Hatchback, 2001-2004 Infiniti I30 and I35, 2002-2003 Inifiniti QX4, 2003-2008 Infiniti FX35 and FX45 and 2006-2010 M35 and M45 vehicles. The vehicles are equipped with non-desiccated, frontal passenger air bag…
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Nissan will notify owners, and dealers will replace the front passenger air bag inflators with alternate desiccated inflators, free of charge. The recall began February 12, 2020. Owners may contact Nissan customer service at 888-737-9511 or Infiniti customer service at 888-810-3715.
Nissan North America, Inc. (Nissan) is recalling certain 2012 Nissan Versa hatchbacks originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan) and the U.S. Virgin Islands, or "Zone A". Additionally, if not…
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Nissan will notify owners, and dealers will replace the front passenger air bag inflators, free of charge. The recall began on June 8, 2017. Owners will receive a second notice when remedy parts become available. Owners may contact Nissan customer service at 1-800-647-7261.
Nissan North America, Inc. (Nissan) is recalling certain model year 2003-2008 Infiniti FX35 and FX45, 2003-2004 Infiniti I35, 2006-2010 Infiniti M35 and M45, and 2007-2011 Nissan Versa vehicles, originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa…
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Nissan will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began December 21, 2017. All owners should receive a second notice by May 15, 2017. Owners may contact Nissan customer service at 1-800-647-7261.
Nissan North America, Inc. (Nissan) is recalling certain model year 2006-2010 Infiniti M35 and M45 vehicles manufactured April 4, 2004, through October 5, 2010. Over time, the accelerator pedal sensor signal may deteriorate resulting in the output of an incorrect signal causing the engine to go into fail-safe (limp home) mode.
In this fail-safe mode, throttle valve deposits may cause the engine to stall when the vehicle is coming to a stop or at idle, increasing the risk of a crash.
Nissan will notify owners, and dealers will replace the accelerator pedal assembly and reprogram the engine control module, free of charge. The recall is expected to begin during November 2013. Owners may contact Nissan at 1-800-647-7261.
I am filing a complaint regarding a safety-related failure of the driver’s seat bracket in my vehicle. The bracket has broken, causing the driver’s seat to rock back and forth while the vehicle is in motion. I took the vehicle to an authorized dealer for inspection, and they confirmed that the seat bracket has failed. I was also informed that the replacement part is no longer in production and is unavailable. This condition poses a significant safety risk. A loose or unstable driver’s seat can impair vehicle control, increase driver distraction, and reduce the effectiveness of seatbelt and airbag systems in the event of a crash. As a result, this defect substantially increases the likelihood of an accident and the risk of serious injury. I am aware that there have been numerous similar complaints regarding this issue, yet no recall has been issued. Given the safety implications and apparent frequency of this defect, I believe this matter warrants further investigation and corrective action.
I was driving home recently and the back of my seat near the base gave out on me, the lower back/bottom raising motor was working but the seat was not going up. Upon inspection I found that the welds on the seat bracket had broken, going online and searching found me countless forums of seat brackets breaking during driving. Two main issues with this 1. I almost lost control due to the sudden drop 2. If I was to get into a collision the seat is not secure whatsoever. This is not an uncommon issue and I am astonished no recall has been given Sources of similarity [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Electrical fault in a sensor that I believe causes the engine to shut down. This issue was reported to Infiniti but not corrected; although, Nissan issued a voluntary recall citing a sensor failure that can lead to engine shutdown.
Failure of Occupant Detection Sensor. Air bag light keeps blinking.
While traveling 65 mph on an interstate my car slowed to approximately 20mph and iwould not accelerate. The slip indicator/voc and check engine light came on and all I was able to do was make it to the exit with my hazard lights on. I thought maybe the battery or alternator was the cause. I tested both and both were good. I was been trying to track down the problem and had been at a loss until I started to investigate discovering that several 07 infinity models have been having the similar issue as mine.
There are cracks all along the airbags in the front of the vehicle just like the previous recalled Infiniti models
On 7/13/21 afternoon, I parked my car in a parking garage of Purdue University, located in West Lafayette, IN. Around 6 pm, as I was backing out of my parking spot on reverse gear and turning the steering wheel, the car seemed sluggish. So, I pressed the accelerator -- lightly, I believe . All of a sudden, the car just took off, moving backward very fast in a semicircle. It first hit the back of a parked car with its front right side and then a concrete wall with its back with tremendous force. I was alone in the car. I called my wife. She came from our home and called 911. The university police and medic arrived promptly, as did two of our friends. One friend drove my wife and me to IU Health Hospital emergency in Lafayette, IN, and the other friend waited at the accident spot for AAA to come. Apparently, AAA came a little later and towed the car to Nissan of Lafayette body shop. Based on the x-rays and CT scans done at the emergency, the attending physician's assistant told me -- apparently, after consulting with a neurosurgeon -- that I suffered two fractures in a neck bone ("transverse process of cervical vertebra"). She gave me a hard collar and asked me to wear it 24 hours a day, expect when taking a shower, for 6 to 8 weeks. She also asked me to see a neurosurgeon, whom I will see on 7/26/21. The body shop person I spoke with next day told me that the car would likely be totaled (the car is still there). Since then, I have been thinking why the car moved so fast and also searching the web to find out any reason for it. Could it be an instance of the "sudden acceleration" problem? I must say that I have been driving Infiniti cars for many years. I have been very pleased with them so far, as well as the service provided by Infiniti dealers, especially my current one, Dreyer & Reinbold Infiniti of Indianapolis. I have decided to inform NHTSA of this accident so that no other person driving an Infiniti car meets with an accident like this.
I have a 2007 Infiniti M35S that has been garaged kept since purchase. My dashboard has started to crack and exude a shiny, sticky, messy substance. I do not know whether this substance is toxic to the touch or my respiratory system. I have never used any type of cleaner or solvents on my dashboard, only a microfiber towel and water. I'm not sure how to answer how my safety or the safety of others is at risk since I don't know what the particular substance is. Secondly does the fragile state of the dashboard put me and my passengers at greater risk of injury with the discharge of an airbag. I have read several complaints where other Infiniti owners are experiencing the same issue with Infiniti vehicles circa 2006 - 2008. Infiniti should do the right thing and fix this problem!!
The left front driver seat began moving slightly fwd/back when braking and accelerating at @ 75K miles. then that assembly just broke (seat settled) as I got in the car one day and I can no longer move it back and forth or up/down at all. so rail broke and then the seat motor died. I have read of so many of these stories with this year vehicle. upon research, I found they only used this assy from 5/2006 to 9/2007. I have to believe nissan/infiniti knew they had an issue with this design. *tr
I have a very sticky and melting dashboard that IS affecting the visibility and glare while driving. *tr
I have noticed my dash IS melting terribly bad its now has soft spots and IS now super sticky from melting and cracking and chiping off in some areas where it has melted and then cracked as it hardened back. If I try to clean it with cleaner made for dashes the color just smears and the dash material its self smears and any kind of car cloth just leaves patches of stuff from the dash being sticky and melted. This has been a common problem I am finding all over the web. Why are our dashes not being fixed? This can cause major issues if I was to get into a wreck and the dash just crumbles or squishes because its melted.
I was driving on freeway and drivers seat bracket broke and threw me forward and almost caused severe accident--- took to dealer who said this happens a lot in these cars and they wanted 1500$ to fix-- I cant afford-- I checked and there have been over a hundred such reports-- some involving injury-- should these seat brackets not be recalled??? Only 75K on odometer
As I was driving on a normal city street in regular traffic, the driver seat suddenly started moving forward, powered by the seat control. I reached down to push the lever/seat control back, but the seat motor would not stop; it pushed the seat fully forward. I stopped the car to move it back and was unable to. The other seat functions worked: up, down, tilt, etc. This has happened on four separate occasions. The last three times the seat motor has started working again of its own accord. This time it IS still stuck forward.
The power seats lost its memory function
My drive shaft broke while I was on the highway driving at 65mph. The drive shaft then bang a massive dent in the engine. 1200$ I was lucky enough to be alive to report this
I am getting a code of p1772 low coast solenoid valve within the transmit ion. When this does this the engine will not shift into gear when vehicle IS on the road, and will just coast and we have no control of the vehicle. Nissan knows about it and has it procedure to diagnose it. Vehicle IS in motion at the time. Faulty censor within the valve body. Infinity part number: 3175017x4e
During normal operation, the seat has failed in it's original design intent. I believe that the a failure in some component under the seat caused stress on the pivot point for up-down movement in the seat and over an extended period of time the point finally sheared. I believe the extensive stress was caused because of the automatic seat movement that occurs when the driver enters and exits the vehicle the bracket which allows the seat to move up and down with the powered control has failed on both sides of the left front bucket seat. the seat now moves freely forward and back and poses a serious safety risk to myself and anyone else who might be driving the vehicle. this puts me in a terrible position because as a concerned consumer I have to worry about the fact that an accident could be fatal due to component failures. should I move forward with getting rid of the vehicle, either by selling it to another person or trading in the vehicle, I put someone else in risk and/or will take a huge loss on the value of the vehicle because of the condition which was caused by poor design and/or quality testing. this IS a serious issue and needs to be remedied by nissan USA immediately!
The driver seat rear bracket broke under normal use and has resulted in the seat not being securely attached to the frame. I was entering the parked vehicle when it broke. As a result the seat flips forward when stopping which IS extremely unsafe. Judging by the hundreds (m/b thousands of complaints online) this IS clearly a major manufacturing defect that nissan should repair at no cost to owners.
Takata recall: may 23, 2016 manufacturer recall numberr1622 nhtsa recall number16v-349 recall statusrecall incomplete according to this recall, it states that I should not have passengers in the car because the airbag could deploy at any time and may send metal pieces flying. This IS the only form of transportation that I own, it IS not only inconvenient not to be able to drive others around (i have 2 kids) but it makes me worried about myself. How long does it take for them to get the parts to replace this issue? How much longer are we to endure this inconvenience and stress? It has been almost 2 years.
Fuel gauge does not read correspond to amount of fuel in tank. When car IS empty fuel gauge continues to show 1/4 tank leading to dangerous stalls in traffic. There was a recall issued for 2003-2004 M45 vehicles for this exact same problem.
TL* the contact owns a 2007 infiniti M35. The contact stated that driver side seat belt failed and the seat looked as if it were positioned incorrectly and unbalanced. When the contact attempted to adjust the seat, it failed to move without warning. The vehicle was taken to the local dealer (infiniti suitland, 4800 branch ave, suitland, md, 20746) where it was diagnosed that the frame /lever failed and that the entire seat needed to be replaced. The vehicle was not repaired. The manufacturer informed the contact that there was no recall and that the replacement would be an out of pocket expense. The failure mileage was approximately 130,000.
The two brackets that support the seat back on the drivers seat have snapped / sheared. The seat back IS no longer supported and the seat base raising mechanism no longer works. The problem started on the right side and after a couple of weeks the left side failed.
Takata recall. Recall issued 1/10/2017, manufacturer recall number 1701, nhtsa recall number 17v-028. have not heard from dealer!
2007 infiniti M35. attorney representing consumer writes in regards to vehicle dashboard exposure to sunlight- melts/ sticky, emits a chemical odor and displays cracks. *smd the consumer stated the air bag recall repair exceeded a reasonable amount of time. Updated 06/19/2017*js
Dash has cracked in numerous places. The car IS garage kept and I clean the dash with a lightly damp rag, no products. It began to feel sticky/tacky before it cracked. Infiniti IS doing nothing to resolve this.
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.