1992 Mazda 626
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 1992 Mazda 626. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 1992 Mazda 626. Newest first.
The groove for the rear wheel bearing retainer ring was incorrectly machined.
Risk and remedy
Risk
If the retaining ring does not sit correctly in thegroove, the axle lug nuts will break, causing the brake drum, wheel, and tireassembly to separate from the vehicle.
Remedy
Midas shops will replace the brake drums with other brake drums from another supplier.
Owner complaints
19 complaints3 involved a crash3 injuries
What owners report most
Latest complaints
- Parking brake › Driveline › Hydraulic › Hoses, lines/piping, and fittings · Service brakes, hydraulic
1992 mazda 626 dx, odometer 184,580mi. Vehicle traveling at approx 35mph on city street. As another vehicle cut me off I pressed the brakes hard at which point I heard a popping sound and brake pedal went all the way to the floor but the car was not stopping. at which point I pumped the brakes a…
1992 mazda 626 dx, odometer 184,580mi. Vehicle traveling at approx 35mph on city street. As another vehicle cut me off I pressed the brakes hard at which point I heard a popping sound and brake pedal went all the way to the floor but the car was not stopping. at which point I pumped the brakes a few times and only heard some air hissing sound. I was lucky enough to be able to downshift the manual transmission and use the hand brake to narrowly avoid an accident. It turns out that the brake line(or possibly multiple lines) under the car ruptured and caused complete loss of braking fluid(which spilled out of the system) and therefore complete loss of braking ability. The car IS currently disabled and available for inspection. This should be investigated as possible defect in components and/or manufacturing process. *kb
- Power train › Automatic transmission
I am the owner of a1992 mazda 626 which IS having a transition problem indicated by the flashing hold light. Though my talking to many mazda owners this seems to be a common occurrence with this make, model and year car. At this time the transition IS shifting rough and appears to not shift past third gear.
- Power train › Automatic transmission › Control module (tcm/pcm/tecm)
Mazda 626 - auto transmission - full maintenance history at mazda dealer. Auto transmission hold light issues and locking lugs in the torque convertor fragmented into the gear selection sections of the auto transmission. Dealer warranty did not apply due tot he torque convertor being seen by…
Mazda 626 - auto transmission - full maintenance history at mazda dealer. Auto transmission hold light issues and locking lugs in the torque convertor fragmented into the gear selection sections of the auto transmission. Dealer warranty did not apply due tot he torque convertor being seen by insurers as an accessory to the transmission rather than a part of it. after some $3,500 we have the auto transmission replaced, and it still doesn't work - it starts to select 4TH gear in over drive to start etc. Ends u that the transmission computer went haywire which sent the transmission into early failure. I thought I was just unlucky until I started reviewing the costs for transmission computers ion the web and found huge numbers of individuals who had the same experiences. mazda should have recalled all of the above, particularly where they had been the ones maintaining the unit over the years. it IS a very poor performance.
- Seat belts › Front › Retractor
I have a 1992 mazda 626, with automatic front seat belt retractors. about six months ago, the right side retractor failed, resulting in an extended buzzing of the seat belt alarm, and a dashboard warning light that would not go out. mazda agreed to furnish the part, but left me with the…
I have a 1992 mazda 626, with automatic front seat belt retractors. about six months ago, the right side retractor failed, resulting in an extended buzzing of the seat belt alarm, and a dashboard warning light that would not go out. mazda agreed to furnish the part, but left me with the significant labor cost. now the left side has failed. I took it in to the dealer today, the second business day of the year, and the service department advises me that, as of this year, mazda will not assist in this repair at all. this malfunction may prevent me from obtaining a valid safety inspection, and the cost of this repair would be nearly 1/2 the present value of the vehicle. I thought there was some nhtsa requirement that the manufacturer had to maintain the seat belt system from malfunctions, and make repairs at their expense.*ak
- Tires
Driving from denver, co towards santa barbara, ca on 6/15/01. was on hwy 70 west at mile marker 100 in utah between green river and salina, when tire blewout at 75mph and car went out of control and landed in ditch. tire damaged and left rear side bumper detached from car. neck injury as a…
Driving from denver, co towards santa barbara, ca on 6/15/01. was on hwy 70 west at mile marker 100 in utah between green river and salina, when tire blewout at 75mph and car went out of control and landed in ditch. tire damaged and left rear side bumper detached from car. neck injury as a result of accident. subsequently discovered that tread was peeling off tire as driving. have pictures of tire damage and skid marks on road. also have peeled off tread but not original tire. tire info given previously IS off right rear tire which was purchased at the same time as damaged tire. can also get police report if necessary. note: could not find dot # so provided other tire numbers. *Ak (dot number: ??? tiresize: p18570r14m)
- Exterior lighting › Turn signal
Front lens on turn signal are cracked. vehicle hasn't been in an accident. Consumer covered holes up with tape so moisture wouldn't settle in. Mazda was contacted and they had no complaints.*aki
- Unknown or other
No summary listed for abov evehicle. *ak
- Seat belts
Belt mechanism fails to move the belt forward when the door IS opened.
- Vehicle speed control
Component failure unknown. car was cold started from park, gear shift (firmly believed to be) placed in reverse; emergency brake released; clutch eased; car fast accelerated forward, jumping over a cement block/tire stop, crashing into and partially through an aluminum guard rail; cruise control was used previous evening
- Equipment › Electrical › Radio/tape deck/cd etc. · Power train · Visibility › Rearview mirrors/devices
Speedometer broken.
- Air bags › Frontal · Service brakes, hydraulic › Antilock/traction control/electronic limited slip
While driving applied the brakes with force, causing the air bag to deploy, causing facial burns/neck pain. *ak
- Vehicle speed control
Throttle stuck due to fouled throttle body. *Dh
- Seat belts
The automatic shoulder seat belt moves back and forth, when consumer IS driving the vehicle. please describe. *ak
- Power train › Automatic transmission › Lever and linkage › Column shift
While driver was sitting in car with foot hanging out, transmission slipped into gear, pulled driver out, ran driver over. *Dsh
- Visibility › Sun/moon roof assembly
Metal bracket around sun roof failed. *Dsh
- Suspension › Front › Macpherson strut
Macpherson strut failure, spring ruptures rubber housing, causes loss of vehicle control. *ak
- Seat belts
Driver's side automatic seat belt has failed, motorized belt has completely stopped working. tt
- Power train › Automatic transmission
Automatic transmission failure, makes loud noise when driving, needs to replace transmission. *ak
- Seat belts
Automated seat belts on driver side broke for seventh time. tt
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10213425Speedometer replacement procedure
- 10154879In support of the new MRT distribution, Mazda will ship to dealers a new Dual Purpose Diagnostic Leak Detector beginning March, 2019. Training videos will be posted to MGSS shortly and Workshop Manual procedures will be revised gradually.
- 10153339In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10148072In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10144333In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer's responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the "Speedometer Replacement Label". Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda's vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMO's services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after-warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10118467In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealer?s responsibility to comply with Federal, State, and local laws concerning odometerand related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the ?SpeedometerReplacement Label?.Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazda?s vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service.With the use of SPECMO?s services, a Mazda dealer can get the odometer setting updated to reflect the correct mileage at the time of replacement for both warranty and customer pay repairs, therefore resulting in a higher level of customer satisfaction. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 10098367In accordance with federal regulations, follow the procedure listed below when replacing a speedometer.note:mazda vehicles are manufactured with tamper-proof speedometers.when a speedometer IS replaced, the new speedometer will read zero (0) miles.this procedure IS extremely important to accurately represent actual vehicle mileage.prior to speedometer removal, complete the information required on the speedometer replace-ment label. Labels can only be ordered through mstore, not mdcs.
- 10009427Battery test procedure requirements.
- 10009424Speedometer replacement procedure.
- 54319Pre-painting preparations for front and rear bumpers.
- 52520Parts replacement after airbag deployment.
- 52503Maintenance free battery - diagnostic and charging procedure.
- 52497Use of a/c tracer dye.
- 52492Wiper motor inoperative - circuit breaker activation.
- 39763Hard start with cold engine.
Every Mazda 626 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.