2016 Mazda CX-3
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mazda › CX-3 › 2016
These records cover every 2016 Mazda CX-3. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2016 Mazda CX-3. Newest first.
Mazda North American Operations (Mazda) is recalling certain 2014-2018 Mazda3 and 2016-2021 CX-3 vehicles. The rearview camera image may not display properly by showing a flickering or distorted image.
Risk and remedy
Risk
A rearview camera that does not display properly can reduce the driver's rear view, increasing the risk of a crash or injury.
Remedy
Dealers will inspect and replace the rearview camera, as necessary. In addition, dealers will install a wiring harness fastening seal. All repairs will be performed free of charge. Interim notification letters, notifying owners of the safety risk, were mailed September 13, 2023. Final owner letters for affected models and model years in the states of CT, MA, MD, NJ, NY, PA and VA were mailed August 14, 2024. The remaining owner notification letters will be mailed at a future date, anticipated on or before May 1, 2025. Owners may contact Mazda customer service at 1-800-222-5500, Option 6. Mazda's number for this recall is 6023G.
Mazda North American Operations (Mazda) is recalling certain model year 2010-2013 Mazda3 and Mazdaspeed3 vehicles manufactured November 18, 2008, to June 8, 2013, 2012-2015 Mazda5 vehicles manufactured October 26, 2010, to June 22, 2015, 2016 CX-3 vehicles manufactured June 1, 2015, to December 26, 2015, and 2013-2016 CX-5 vehicles manufactured December 15…
Risk and remedy
Risk
If the lift gate falls unexpectedly, it may hit the user, increasing their risk of injury.
Remedy
Mazda dealers will replace the both lift gate supports, free of charge, however parts are not currently available. The recall began April 2017. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9916H.
Mazda North American Operations (Mazda) is recalling certain model year 2016 CX-3 vehicles manufactured June 1, 2015, to December 2, 2015, 2013-2014 Mazda2 vehicles manufactured July 3, 2013, to August 8, 2014, 2014-2016 CX-5 vehicles manufactured January 19, 2013, to December 2, 2015, and 2013-2015 CX-9 vehicles manufactured December 6, 2012, to July 31…
Risk and remedy
Risk
If the steering knuckle separates from the strut assembly, it can cause a loss of steering control, increasing the risk of a crash.
Remedy
Mazda will notify owners, and dealers will inspect the lower mounting nuts and bolts that secure the front strut assembly to the steering knuckle. If the bolts are loose, they will be replaced and then correctly tightened, free of charge. The recall is expected to begin May 20, 2016. Owners may contact Mazda customer service at 1-800-222-5500. Mazda's number for this recall is 9316D.
Owner complaints
48 complaints4 involved a crash2 injuries
What owners report most
Latest complaints
- Unknown or other
It’s a safety risk with this car. The converter burns super fast, causing issues that seem like it’s related to transmission or alternator.
- Fuel/propulsion system
While driving on the highway on a posted 65mph, the fuel remaining on the vehicle was posted at 1/4, approx. 75miles remaining. The vehicle abruptly stalled and I managed to pull over on the side of the road. The vehicle then refused to start again. Had to bring it to a fuel station and refueled leading to the vehicle starting again. Dealership diagnosed a bad fuel pump and fuel rail.
- Back over prevention
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair.…
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Back over prevention
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rearview camera image was distorted on several occasions…
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rearview camera image was distorted on several occasions, and was black on other occasions. The local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 45,000. VIN tool confirms parts not available.
- Back over prevention
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact…
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.
- Back over prevention › Rearview system braking · Back over prevention › Warnings · Electrical system
What component or system failed or malfunctioned, and is it available for inspection upon request? Rear view camera and speedometer How was your safety or the safety of others put at risk? Rear view camera restarts and flickers so seeing behind while in reverse is dangerous. The electrical…
What component or system failed or malfunctioned, and is it available for inspection upon request? Rear view camera and speedometer How was your safety or the safety of others put at risk? Rear view camera restarts and flickers so seeing behind while in reverse is dangerous. The electrical component issues have bled over to the digital speedometer, making it difficult to see the speed at which you are driving. Has the problem been reproduced or confirmed by a dealer or independent service center? Unknown Has the vehicle or component been inspected by the manufacturer, police, insurance representatives or others? Unknown Were there any warning lamps, messages or other symptoms of the problem prior to the failure, and when did they first appear? No
- Engine
My recent experience with the service at Putnam Mazda was extremely disappointing and frustrating. What should have been a routine visit turned into a distressing ordeal. My car suddenly died on the freeway without warning lights, prompting me to bring it in for servicing. Initially, I appreciated…
My recent experience with the service at Putnam Mazda was extremely disappointing and frustrating. What should have been a routine visit turned into a distressing ordeal. My car suddenly died on the freeway without warning lights, prompting me to bring it in for servicing. Initially, I appreciated being offered a loaner car. However, subsequent communication regarding the repair was inadequate and concerning. I received an email stating the necessary part wouldn't be available until July and was abruptly instructed to return the loaner car immediately, with no consideration for my circumstances. This lack of empathy was shocking, especially as a loyal Mazda customer. Furthermore, I experienced racial and gender profiling throughout the ordeal. Instead of addressing my concerns, I was met with aggression and threats of police involvement, making me feel targeted and discriminated against. When I questioned this response, I was told my email was "direct," justifying the aggression. Additionally, the loaner agreement lacked an expiration date. Despite being assured they would provide a grace period if needed, I was demanded to return the car immediately, with false claims about the agreement. This manipulation, gaslighting, and harassment are not only unethical but also against the law. To exacerbate matters, safety concerns with my vehicle were brushed aside. Despite my car having a non-working engine, the dealership suggested I drive it off the lot. This reckless recommendation not only endangered my safety but also the safety of others on the road. Despite repeatedly expressing these safety concerns, the dealership did nothing to address them. Responding to a concerned customer with threats of police involvement is never justified. Instead of addressing my concerns, I was met with aggression and threats. They threatened to report the car stolen and demanded I drive my car without a working engine. This behavior was unwarranted and left me feeling insulted and degrad
- Exterior lighting
THE HEADLIGHTS HAVE CONTAINED MOISTURE FOR THE LAST 4 YEARS, CAUSING DIFFUSED, DIMMED VISIBILITY AT NIGHT...VERY DANGEROUS. ALSO, CONCERNED THAT ELECTRICAL MAY BE AFFECTED EVENTUALLY.... Mazda still will not recall and repair?? on fixed income, to pricey for me to repair!
- Unknown or other
The infotainment center has a mind of its own. It's going berserk. Others have said that it is like a ghost is taking over control. When in park, or at a stop light, I have no control over the screen. It changes channels, or calls random people (If I have my phone connected via bluetooth.) This…
The infotainment center has a mind of its own. It's going berserk. Others have said that it is like a ghost is taking over control. When in park, or at a stop light, I have no control over the screen. It changes channels, or calls random people (If I have my phone connected via bluetooth.) This doesn't happen when in drive, above a certain speed. (Mazda has the infotainment set for the touchscreen to not function above a certain speed.) This is a safety issue because it is distracting. I have contacted Mazda and they currently are refusing to pay for the replacement.
- Back over prevention
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention). The contact stated that while in reverse (R), the back over prevention camera flickered. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 80,000.
- Back over prevention
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair.…
The contact owns a 2016 Mazda CX-3. The contact received notification of NHTSA Campaign Number: 23V487000 (Back Over Prevention) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted. The contact stated that the rearview camera had failed to operate as needed. The manufacturer was made aware of the issue. The approximate failure mileage was 58,000. VIN tool confirms parts not available.
- Electrical system · Unknown or other
My Mazda CX3’s touchscreen started registering “ghost presses” without any input from me. This leads to the car scrolling through contacts and placing calls while driving. This almost caused an accident as I was scrambling to avoid the embarrassment of randomly dialing someone multiple times. Many…
My Mazda CX3’s touchscreen started registering “ghost presses” without any input from me. This leads to the car scrolling through contacts and placing calls while driving. This almost caused an accident as I was scrambling to avoid the embarrassment of randomly dialing someone multiple times. Many others have also experienced the same issue with their Mazda infotainment systems. This should be a recall as the sudden distraction and panic caused by this poses a serious safety risk.
- Electrical system
Mazda CX3 Connect touch screen in the center display may not accept touch commands properly and faded. The film inside the touch screen may be corroded due to moisture
- Seats
Drivers seat constantly sinks down as you are driving. It will not stay in place. It has a manual seat up and down lever. I have been having this problem every since purchased. I have look for solutions but found none. I am not the only one with this problem as I found out online. It is a seat manufacturer problem!
- Exterior lighting
I was recently served a notice in regards to our back up camera. Of greater concern is the moisture issue in the headlight that MAZDA seems to not be concerned about. However my inspection mechanic seems to be offended and warns it shan't pass PA inspection. Why won't Mazda deal with this defect?…
I was recently served a notice in regards to our back up camera. Of greater concern is the moisture issue in the headlight that MAZDA seems to not be concerned about. However my inspection mechanic seems to be offended and warns it shan't pass PA inspection. Why won't Mazda deal with this defect? If you poll other owners the concern is not random. Many folks have paid hundreds of dollars for a replacement. As retired folks this is an obstacle due to very limited SS income. As a senior I have driven over 50 years WITHOUT a gadget showing me a picture. I use my mirrors as I was taught by the policeman instructor. However I was ALWAYS in need of my headlights! Seems obvious which should be priority. What help can your team offer this discouraged Mazda owner? [XXX] [XXX] INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Lane departure › Warning
The Lane Departure Warning on both left and right side mirrors sporadically does not work. This is the first time I'm reporting it to NHTSA. but the problem has been going on for at least three months. The LDW lights appear when I turn on the engine, but sporadically do not appear in traffic when…
The Lane Departure Warning on both left and right side mirrors sporadically does not work. This is the first time I'm reporting it to NHTSA. but the problem has been going on for at least three months. The LDW lights appear when I turn on the engine, but sporadically do not appear in traffic when there is a vehicle near my left or right side. Sometimes the LDW works fine, and other times, not at all. I never know until I'm in traffic if the LDW will work -- which puts me at risk when changing lanes unless I physically turn my head to check traffic, which defeats the whole purpose of LDW. The car mechanic who changes my oil every three months did a diagnostic check and could not explain the on-again/off-again LDW lights.
- Exterior lighting
Condensation in the headlights assembly. It’s a common problem. I have already drivers side front replaced at the dealer, now the passenger side front is showing lots of moisture inside the headlamp. Super dangerous as it defuses the light, limiting visibility in the dark. Mazda, please do…
Condensation in the headlights assembly. It’s a common problem. I have already drivers side front replaced at the dealer, now the passenger side front is showing lots of moisture inside the headlamp. Super dangerous as it defuses the light, limiting visibility in the dark. Mazda, please do something!!! This is ridiculous. I have attached a photo of the headlight that has water in it. The second attachment is the paperwork that came when they replaced the drivers side for the same issue under warranty.
- Exterior lighting
The headlamps contain and hold moisture, although there are no cracks. This IS causing moisture, and there IS a concern that electrical problems may occur in the future.
- Electrical system
The contact's daughter owns a 2016 Mazda CX-3. The contact stated that while her daughter's vehicle was in reverse(R), the vehicle failed to stop upon the depression of the brake pedal. There was no warning light illuminated. The contact stated that her daughter engaged the parking brake; however…
The contact's daughter owns a 2016 Mazda CX-3. The contact stated that while her daughter's vehicle was in reverse(R), the vehicle failed to stop upon the depression of the brake pedal. There was no warning light illuminated. The contact stated that her daughter engaged the parking brake; however, the vehicle continued to roll back until the vehicle hit a curb and stopped. The vehicle was taken to an independent mechanic who noted that the failure was not brake related but was a computer malfunction. The contact called a dealer who referred her to the NHTSA hotline for assistance. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was approximately 57,000.
- Electrical system
Infotainment system and screen failure. The screen develops "spiderweb" cracking. This cracking first appeared 3 years ago. Now the computer reboots continuously. This causes zero access to radio, GPS, or other features to operate the vehicle. The vehicle was taken to the dealer, at the…
Infotainment system and screen failure. The screen develops "spiderweb" cracking. This cracking first appeared 3 years ago. Now the computer reboots continuously. This causes zero access to radio, GPS, or other features to operate the vehicle. The vehicle was taken to the dealer, at the suggestion of Mazda USA. For a "diagnostic" fee of $180 I was told what I already knew. The system is broken. This is a rampant problem with multiple complaints online regarding Mazda Infotainment systems. They expect consumers to pay $2,800 to repair the system.
- Engine · Fuel/propulsion system
Engine stalled while driving and all the dashboard lights turned on. Could not turn engine back on again. Upon inspection, it was found that the fuel injector pump was faulty and was subsequently replaced by the dealership. Fast forward a year, check engine light came on and vehicle began to stall…
Engine stalled while driving and all the dashboard lights turned on. Could not turn engine back on again. Upon inspection, it was found that the fuel injector pump was faulty and was subsequently replaced by the dealership. Fast forward a year, check engine light came on and vehicle began to stall again. Dealership states that the fuel injector burnt out due to the initial fault in the fuel injector pump. Furthermore, it burnt out my catalyst.
- Exterior lighting
The seals around headlights are failing and causing moisture infiltration. Limiting distance of visibility during night driving. I have found through forums that this is a common occurrence.
- Fuel/propulsion system
Vehicle stalled while driving. On 9/29/21 Suburban Mazda of Troy removed the Mazda mobile start. On 10/13/21, the engine stalled and shut off at approximately 50 mph and coasted the vehicle to the side of the road. There were no warning light prior and the vehicle had approximately 1/4 tank of gas…
Vehicle stalled while driving. On 9/29/21 Suburban Mazda of Troy removed the Mazda mobile start. On 10/13/21, the engine stalled and shut off at approximately 50 mph and coasted the vehicle to the side of the road. There were no warning light prior and the vehicle had approximately 1/4 tank of gas (according to the gauge). AAA came and put 2 gallons of gas in and the vehicle started and drove normally afterwards. After reviewing the NHTSA website for 2016 Mazda CX-3 I found at least two other complaints for vehicles stalling while driving with 1/4-1/8 tanks of gas. I am concerned that this is a trending issue and an unreasonable risk to safety
- Electrical system
The media console screen on my Mazda CX-3 has spiderweb-like cracking. This causes "ghost touch" which means that while I am driving, the system makes consistent loud beeping noises, frantically changes screens, changes music, calls people (if my phone is connected to bluetooth), etc.. There is no…
The media console screen on my Mazda CX-3 has spiderweb-like cracking. This causes "ghost touch" which means that while I am driving, the system makes consistent loud beeping noises, frantically changes screens, changes music, calls people (if my phone is connected to bluetooth), etc.. There is no way to turn this off and it is incredibly distracting and startling while I am on the road. I know that this same issue has occurred in other Mazda vehicles (like the Mazda3) and the part has been recalled/been covered for replacement under an extended warranty. My local Mazda dealership diagnosed this issue and acknowledged that it is a problem that this is not covered under warranty to fix. They gave me a $2,000 quote to replace the screen (this is money I do not have and believe I should not have to pay to ensure my safety).
- Air bags · Lane departure › Blind spot detection · Seat belts
Passenger restraint malfunction chime sounded every 5 seconds for 35 minutes. Passenger airbags are now disabled. Blind spot monitoring only works sometimes....a mind of its own.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011141Some customers may report concerns with interior upholstery surface stains particularly on high contact areas (e.g.: seats, steering wheel, door panels, shifter...etc.). This may be caused by skin oils or chemicals such as hand lotions.
- 11009654The SKYACTIV-DRIVE FW6A-EL AT uses Automatic Transmission Fluid (ATF) Type: FZ. Only use ATF-FZ to fill or top off the fluid level. ATF-FZ is specially designed for use in the SKYACTIV-DRIVE series AT. It is a low viscosity formula with less friction for better fuel economy. NOTE: ATF-FZ is colored blue for easy identification.
- 11009644Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 11008577Some customers may complain about scratches on the instrument cluster lens.
- 11007029For improvement of electrical diagnosis, the SKYACTIV Wiring Terminal Test Kits has been delivered all the dealers. The terminal test kit enables you: To check pin fit drag of all PCM terminals used in SKYACTIV vehicles and compare suspect terminal drag with a known good terminal. To measure the voltage/resistance avoiding any terminal damage.
- 11007022Some vehicles may experience exterior trim heat damage such (melted, separating, etc.) when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 11007019If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 11007018Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way.
- 11007013Auxiliary key blank cutting procedure. There are currently 2 methods for cutting a new auxiliary key blank. A. Auxiliary Key Trace Cut Method B. Auxiliary Key Code Cut Method
- 11007010Some customer's might state that they notice fluid or oil leaking/dripping on the ground when the vehicle is parked. For this concern, inspect the vehicle for any trace of a fluid or oil leak and use the following examples as a guide to determine if it is severe enough to require a repair, or just to clean the area and monitor it at the next service.
- 11007009Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 11006998Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
- 11006987In accordance with Federal regulations, follow the procedure listed below when replacing a speedometer. NOTE: Tampering with a motor vehicle odometer is strictly prohibited by Federal, and State laws. It is the dealers responsibility to comply with Federal, State, and local laws concerning odometer and related documentation requirements when providing a repair or replacement. Mazda vehicles are manufactured with tamper-proof speedometers. When a speedometer is replaced, the new speedometer will read zero (0) miles. This procedure is extremely important to accurately represent actual vehicle mileage. Prior to speedometer removal, complete the information required on the Speedometer Replacement Label. Labels can only be ordered through Mazda eStore. In an effort to achieve a higher level of Customer Experience and retain the value of Mazdas vehicles, MNAO Warranty Operations is allowing all Mazda dealers to utilize a third party, SPECMO Enterprises, Inc., for Instrument Panel Cluster (IPC) odometer setting service. With the use of SPECMOs services, it is possible that the odometer will be set between 10 to 31 miles over the odometer mileage at the time of replacement for both warranty and customer pay repairs. Please make sure that the customer is aware that there may be a slight variance to the odometer, in which case the customer may have to accept the slightly higher mileage. Since odometer setting service is not part of the warranty repair, it is not warrantable nor required, but optional. However, Mazda Warranty policy provides after- warranty assistance (AWA) or DSA that can be utilized to cover this service expense.
- 11006917Some customers may complain that their liftgate does not open. This can mean a range of things, from the liftgate not unlatching to the power liftgate (PLG) not opening automatically. If you confirm that the customer's concern is that the liftgate does not unlatch correctly, follow the repair information below.
- 11006899Some customers may notice water entry into the front combination lights (as shown below). This is due to poor sealing where rain or other water can enter inside the light. To eliminate this concern, the shape of the front combination light has been changed to improve sealing ability.
- 11005671Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11003398Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 11003397Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
- 11003396Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 11000772Some customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 F (10 C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced at the supplier.
- 10254191Some automotive cleaning products contain strong acid or alkali. When these types of cleaners are used to clean the wheels on Mazda vehicles, the chemicals contents penetrate the clear coating of the wheel surface and damage the paint under the clear coating. The damaged area has the appearance of dark stains or discoloration.
- 10254188Some customers may complain that the ambient temperature on the instrument cluster is displayed more than 50 F (10 C) lower than the actual temperature, resulting in insufficient performance of the air conditioning. This is caused by inappropriate soldering in the ambient temperature sensor. To eliminate this concern, the soldering process has been enhanced at the supplier.
- 10254187Some customers may complain about infotainment center display. Peeling, spider cracks and white dots.
- 10252508Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 10252507Due to limitations, certain vehicles from 2016 to current models might display an inaccurate transmission part number in the Global Electronic Parts Catalog (GEPC). To provide support in such cases, a temporary lookup guide has been developed for assistance.
- 10251387Mazda has developed factory recommended scheduled maintenance services that support all major vehicle systems. Mazda recommends dealers follow the scheduled maintenance tables as cited in the vehicle-specific workshop manual or owner's manual. Services performed outside of Mazda's factory scheduled maintenance are not recommended. These services are unnecessary and create unneeded expenses for your customers.
- 10251368Use the symptom troubleshooting tables below to diagnose MAZDA CONNECT concerns.
- 10248385Some customers may complain about infotainment center display: Center display touchscreen operates by itself (Ghost Touch). The film of the center display may be peeled off. White dots may appear on the center display NOTE: The occurrence of the symptoms depends on the vehicle model and the parts.
- 10244679If you encounter any type of electrical concern (e.g, dead battery, engine no start, DTC(s) stored...), interview the customer before proceeding with normal MGSS diagnosis by asking if any aftermarket devices have been installed. Aftermarket devices may be the cause of the electrical concern. Below are a few examples of unusual electrical concerns caused by aftermarket devices.
- 10243569Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10243568Some vehicles exhibit brake related concerns such as brake noise, brake judder or brake dragging. If you encounter a customer complaint for any one of these symptoms, refer to the following information to understand why symptoms may occur, and to better assist the customer in resolving their specific brake concern.
- 10243551Service bulletin 09-031/20 issued on 09/21/20 IS no longer valid. It IS superceded by recall 6023g (2014-2018 mazda3 and 2016-2021 CX-3 - rearview image may not display properly).
- 10241637Some customers may complain about scratches on the instrument cluster lens.
- 10240496Some vehicles may experience exterior trim heat damage when parked near a glass building or Low-E windows. This may be caused by the sun's reflection.
- 10240431Some vehicles may exhibit a distorted image or no image from the rear mount camera when shifted into reverse. Due to friction, the coating of camera socket terminals may wear out, creating high electrical resistance. NOTE: The icons and the messages are displayed normally.
- 10240427Be advised that TSB "09-031/20 - REAR MOUNT CAMERA IMAGE NOT CLEAR/NO IMAGE ON SCREEN" is no longer valid and has been superseded by "RECALL 6023G - 2014-2018 MAZDA3 AND 2016-2019 CX-3 - REARVIEW IMAGE MAY NOT DISPLAY PROPERLY". Use the link below to view the recall: RECALL 6023G - 2014-2018 MAZDA3 AND 2016-2019 CX-3 - REARVIEW IMAGE MAY NOT DISPLAY PROPERLY
- 10240366In support of the new Mazda MX-5 and CX-3, Mazda will make available for loan on an as-needed basis, a Special Service Tool (SST) to allow for the radar aiming of the blind spot monitoring (BSM) system. The BSM radar aiming is performed whenever the BSM control module, the BSM bracket or the rear bumper is replaced.
- 10238697Interior parts made of resin have antistatic coating to prevent dust from sticking on the surfaces, and depending on the conditions of use, the antistatic components may crystallize slightly, giving an appearance of white stains on the surface. To remove the stains, wipe the stained surface with a towel soaked with water mixed with a small portion of a neutral detergent. If the white stains reappear again, simply wipe them again in the same way. NOTE: The antistatic effect does not deteriorate with this procedure.
- 10238695Some customers may complain of a lack of power under heavy load without any warning lights or DTCs. This concern may be due to a loose or detached hood weatherstrip, which can cause a blockage or restriction in the air intake system.
- 10238671Some customers may complain that the frequency of replenishing the window washer liquid is higher than expected, or they may complain of leakage at or around the washer motor (1). This is caused by a crack that may occur at the joint section of the washer motor housing due to an inappropriate assembly process. To eliminate this concern, the design of the washer motor has been modified to not have a joint section. This is caused by a crack that may occur at the joint section of the washer motor housing due to an inappropriate assembly process. To eliminate this concern, the design of the washer motor has been modified to not have a joint section.
Every Mazda CX-3 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.