2010 Mitsubishi Outlander
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mitsubishi › Outlander › 2010
These records cover every 2010 Mitsubishi Outlander. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
10 recalls name the 2010 Mitsubishi Outlander. Newest first.
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2008-2010 Lancer, 2009-2010 Lancer Sportback, 2008-2013 Outlander, and 2011-2016 Outlander Sport vehicles originally sold in, or ever registered in, Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota…
Risk and remedy
Risk
A detached front control arm can result in a loss of vehicle control, increasing the risk of a crash.
Remedy
MMNA will notify owners, and dealers will inspect the front cross members. Depending on the level of existing corrosion, either a sealing/anti-corrosion agent will be applied or the front cross member will be replaced with a new one. These repairs will be performed free of charge. The recall began August 7, 2020. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-20-003.
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2009-2012 Lancer, 2008-2012 Outlander, 2010-2012 Lancer Sportback, and 2011-2012 Outlander Sport vehicles equipped with either a 4B11 or 4B12 engine. The drive belt automatic tensioner flange may crack, allowing the accessory drive belt to detach.
Risk and remedy
Risk
If the drive belt detaches, the battery will discharge and the engine will stall, increasing the risk of a crash.
Remedy
MMNA will notify owners, and dealers will replace the belt tensioner with one that has an improved shape, free of charge. The recall is expected to begin March 27, 2018. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-18-001.
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2007-2010 Outlander, 2008-2010 Lancer, 2009-2010 Lancer Evolution, and 2010 Lancer Sportback vehicles equipped with sunroofs. The sunroof glass may detach from the sunroof assembly, becoming a road hazard to other vehicles.
Risk and remedy
Risk
If the sunroof glass detaches from the assembly while driving, it can become a road hazard, increasing the risk of a crash.
Remedy
MMNA will notify owners, and dealers will replace the sunroof glass assembly, free of charge. The recall began on February 27, 2018. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-18-003.
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain 2007-2013 Outlander vehicles. In the affected vehicles, water may drop between the hood and the windshield and leak into the wiper motor breathing hole. The water may cause internal corrosion of the windshield wiper motor and the possible failure of the motor.
Risk and remedy
Risk
Failure of the wiper motor can cause a loss of visibility, increasing the risk of a crash.
Remedy
MMNA will notify owners, and dealers will replace the wiper motor, free of charge. The recall began July 28, 2017. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-17-003.
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2007-2013 Outlander vehicles manufactured September 8, 2006, to March 29, 2013. In the affected vehicles, water may enter between the hood and windshield and cause the front wiper link ball joint to corrode, possibly resulting in the wiper link separating and the wipers becoming…
Risk and remedy
Risk
Loss of wiper function can reduce visibility and increase the risk of a crash.
Remedy
MMNA will notify owners, and dealers will replace the rubber boot on the ball joint to prevent water intrusion. Additionally, they will inspect the wiper motor crank arm for excessive play, replacing it as necessary. These repairs will be done free of charge. The recall began on July 28, 2017. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-16-009.
Mitsubishi Motors North America, Inc. (MMNA) is recalling certain model year 2002-2007 Lancer, 2004 Lancer Wagon, 2003-2006 Lancer Evolution, 2003-2006 Outlander and 2007-2013 Outlander V-6 vehicles originally sold in, or ever registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Kentucky, Maine, Maryland, Massachusetts, Michigan, Minnesota…
Risk and remedy
Risk
A detached front control arm can result in the loss of control of the vehicle, increasing the risk of a crash.
Remedy
MMNA will notify owners, and dealers will inspect the front cross members. Depending on the level of existing corrosion, either a sealing/anti-corrosion agent will be applied or the front cross member will be replaced with a new one that has a sealing/anti-corrosion agent applied to it. These repairs will be performed free of charge. The recall began January 2017. Owners may contact MMNA customer service at 1-888-648-7820. MMNA's number for this recall is SR-16-003.
Mitsubishi Motors North America, Inc. (Mitsubishi) is recalling certain model year 2009-2010 Mitsubishi Lancer vehicles manufactured January 12, 2009, to July 6, 2010, 2009-2010 Outlander vehicles manufactured January 12, 2009, to August 27, 2010, 2010 Lancer Sportback vehicles manufactured June 17, 2009, to June 8, 2010, and 2010 Lancer Evolution vehicles…
Risk and remedy
Risk
Unstable voltage could result in intermittent failure of the vehicle's head lights, tail lights, and windshield wipers. If the headlights and/or windshield wipers fail, the driver could have reduced visibility. If the tail lights fail, the vehicle could be less visible. Either condition increases the risk of a crash.
Remedy
Mitsubishi will notify owners, and dealers will replace the affected ECU, free of charge. The recall began on June 15 ,2015. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-15-002.
Mitsubishi Motors North America, Inc. (Mitsubishi) is recalling certain model year 2009-2011 Lancer vehicles manufactured March 16, 2009, to March 30, 2011, 2010-2011 Lancer Sportback vehicles manufactured June 17, 2009, to December 1, 2010, 2010-2011 Lancer Evolution vehicles manufactured July 14, 2009, to January 7, 2011, 2009-2011 Outlander vehicles…
Risk and remedy
Risk
Failure of the blower motor may reduce the performance of the windshield defroster, diminishing the driver's visibility and increasing the risk of a crash.
Remedy
Mitsubishi will notify owners, and dealers will replace a suspect blower motor, free of charge. The recall began on June 15, 2015. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-15-003.
Mitsubishi Motors North America, Inc. (Mitsubishi) is recalling certain model year 2008-2011 Lancer, Lancer Evolution, and Outlander; 2009-2011 Lancer Sportback, Lancer Rilliart, and Lancer Sportback Ralliart; and 2011 Outlander Sport vehicles. The affected vehicles, manufactured with 4B1 engines, have an engine pulley and belt arrangement for turning the…
Risk and remedy
Risk
If the drive belt detaches, the battery may discharge, resulting in an engine stall, increasing the risk of a crash.
Remedy
Mitsubishi will notify owners, and dealers will replace the drive belt with a rubber belt. Drive pulleys that are excessively worn will be replaced. These repairs will be performed free of charge. The recall began on October 15, 2014. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-14-009.
Mitsubishi Motors North America, Inc. (Mitsubishi) is recalling certain model year 2013 Outlander vehicles equipped with a 6-speed automatic transmission. Additionally, Mitusbishi is recalling certain 2007-2012 Outlander vehicles that received replacement 6-speed automatic transmissions during servicing. The transmissions in these vehicles have…
Risk and remedy
Risk
A power steering fluid leak could result in a loss of steering assistance, increasing the risk of a crash.
Remedy
Mitsubishi will notify owners, and dealers will replace the power steering pressure tube and return tube, free of charge. The recall began in August 2014. Owners may contact Mitsubishi customer service at 1-888-648-7820. Mitsubishi's number for this recall is SR-14-006.
Owner complaints
60 complaints4 involved a crash2 injuries
What owners report most
Latest complaints
- Unknown or other
Moon roof detached while driving on the highway
- Suspension
Dealer wants to replace rear lower control arms due to corrosion and the car control arms were never addressed when I took it into the dealer for recall 16V458. The dealer was supposed to add a anti corrosion spray to the control arms in the front and back. The corrosion is very bad with these parts on my car and I am very concerned about safety.
- Visibility/wiper
The contact owns a 2010 Mitsubishi Outlander. The contact stated that after turning the front windshield wipers off, the driver’s side and passenger’s side windshield wipers remained in the upright position. The cause of the failure was not determined. The local dealer was notified of the failure…
The contact owns a 2010 Mitsubishi Outlander. The contact stated that after turning the front windshield wipers off, the driver’s side and passenger’s side windshield wipers remained in the upright position. The cause of the failure was not determined. The local dealer was notified of the failure and the contact was informed that the vehicle was not included in NHTSA Campaign Number: 16V791000 (Visibility). The contact indicated that the vehicle had experienced the failure listed in the recall. The approximate failure mileage was 130,000.
- Structure › Body · Suspension
High Point Mitsubishi in High Point NC preformed the recall in regards to rust forming on the underside crossmember of this vehicle. Less than 3 years later this vehicle is immovable because of the exact same reason as the original recall. The technician obviously overlooked areas of which to spray…
High Point Mitsubishi in High Point NC preformed the recall in regards to rust forming on the underside crossmember of this vehicle. Less than 3 years later this vehicle is immovable because of the exact same reason as the original recall. The technician obviously overlooked areas of which to spray the rust preventative in which caused the structural integrity to completely fail at the front mounting location of the driver side control arm onto the crossmember. This vehicle is not safe to drive any longer because of Mitsubishi's lack of thoroughness in performing and evaluating the situation and the condition of said crossmember. High Point Mitsubishi now insists that the issue was resolved even after clear pictures have been sent showing the clear damage and obvious nature of the reasoning of the recall in the first place but argue that they took care of the recall although obviously the exact issue that the recall was made for is thr reason this vehicle is no longer driveable.
- Suspension
The cross member is rusted through with holes in it. Dangerous to drive.
- Visibility
The contact owns a 2010 Mitsubishi Outlander. The contact stated while driving approximately 30 mph, he heard a cracking sound coming from the sunroof. When the contact exposed the glass portion of the sunroof, the sunroof shattered. Upon investigation, the contact associated the failure with NHTSA…
The contact owns a 2010 Mitsubishi Outlander. The contact stated while driving approximately 30 mph, he heard a cracking sound coming from the sunroof. When the contact exposed the glass portion of the sunroof, the sunroof shattered. Upon investigation, the contact associated the failure with NHTSA Campaign Number: 18V071000 (Visibility) however, the VIN was not included. The vehicle was not diagnosed nor repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 115,000.
- Electrical system
ABS pump motor ecu internal failure -loses battery voltage signal internally
- Power train
Early failure of the transmission on outlanders IS known problem and puts drivers at risk for serious injury when the car goes into a safe mode leaving the car stranded in the road. my car gave me no warning prior to the car shutting down. I was stuck in the middle of an intersection on a sunday morning. it took > 1 hour to have the car towed out of harms way.
- Electronic stability control (esc) · Service brakes
There IS some problem with brake. The ABS and asr lights are on. So I decided to go to the mechanic. The mechanic checked the car and he told me ABS pump IS broken. Started when I was driving.
- Structure › Body · Suspension
TL* the contact owns a 2010 mitsubishi outlander. While the vehicle was at schaumburg mitsubishi (660 east gulf rd, schaumburg, il) undergoing routine maintenance, it was discovered that both lower control arms and cross members sustained severe rusting and corrosion. The cause of the failure was…
TL* the contact owns a 2010 mitsubishi outlander. While the vehicle was at schaumburg mitsubishi (660 east gulf rd, schaumburg, il) undergoing routine maintenance, it was discovered that both lower control arms and cross members sustained severe rusting and corrosion. The cause of the failure was not determined. The manufacturer was not notified of the failure. The vin was not included in nhtsa campaign number: 16v458000 (structure); however, the contact stated that the vehicle experienced the same failure listed in the recall. The failure mileage was 75,000.
- Engine
TL* the contact owns a 2010 mitsubishi outlander. The contact received notification of nhtsa campaign number: 18v069000 (engine and engine cooling); however, the part needed for the repair was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the…
TL* the contact owns a 2010 mitsubishi outlander. The contact received notification of nhtsa campaign number: 18v069000 (engine and engine cooling); however, the part needed for the repair was not available. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The vehicle was taken to mitsubishi motor sales of caribbean (located at pr-167, bayamon, toa baja 00953, pr, (855) 251-8715), but the part was not available for the repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. Parts distribution disconnect.
- Engine
TL* the contact owns a 2010 mitsubishi outlander. The contact stated that the engine stalled more than once and was becoming a hindrance. There were no warning indicators illuminated. The vehicle was taken to arrow mitsubishi (3995 s 1ST st, abilene, tx 79605, (325) 692-9500) where it was diagnosed…
TL* the contact owns a 2010 mitsubishi outlander. The contact stated that the engine stalled more than once and was becoming a hindrance. There were no warning indicators illuminated. The vehicle was taken to arrow mitsubishi (3995 s 1ST st, abilene, tx 79605, (325) 692-9500) where it was diagnosed that a flange for the drive belt was needed. The vehicle remained parked at the dealer and was not repaired. The manufacturer was made aware of the failure and did not assist. The failure mileage was 111,668.
- Engine · Visibility/wiper
TL* the contact owns a 2010 mitsubishi outlander. The contact received notification of nhtsa campaign numbers: 18v069000 (engine and engine cooling) and 17v461000 (visibility). The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Salinas mitsubishi…
TL* the contact owns a 2010 mitsubishi outlander. The contact received notification of nhtsa campaign numbers: 18v069000 (engine and engine cooling) and 17v461000 (visibility). The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. Salinas mitsubishi (151 auto center cir, salinas, ca 93907, (831) 444-9458) was contacted and confirmed that the parts were not available for the recall remedy. The manufacturer was called, but the contact was unable to speak with a representative. The contact had not experienced a failure. Parts distribution disconnect.
- Electronic stability control (esc) · Service brakes · Vehicle speed control
After my ABS, tcs, and check engine lights came on, I started to research what my problem was. Come to find out the ABS pump motor IS getting low voltage resulting in poor braking and overall driveability in any weather. In my research I found that this IS a very common problem with many…
After my ABS, tcs, and check engine lights came on, I started to research what my problem was. Come to find out the ABS pump motor IS getting low voltage resulting in poor braking and overall driveability in any weather. In my research I found that this IS a very common problem with many mitsubishi's around this year. I was completely fine with replacing the parts because the car isn't safe for my children, but when looking into the cost of replacement of such a small part, I (along with many other people) can not afford to spend ~$2000 to make our cars safe. If this has truly been a problem for so long why hasn't mitsubishi handled it yet. Until I can find a cheap replacement or if mitsubishi cares about their customers safety, I will be driving my 2010 outlander with no ABS or traction control. Which IS very unsafe.
- Fuel/propulsion system · Power train · Vehicle speed control
I have attempted to mane an appointment to fix 6 recalls my vehicle has, with no luck its been 2 months and no call back.
- Unknown or other
I was driving down a country road in the morning, temperature was about 60 degrees. The sunroof on my 2010 mitsubishi outlander was not open but the safety screen was pushed back. As I was driving down a country road out of nowhere I heard a loud explosion. The noise IS what I would describe as a…
I was driving down a country road in the morning, temperature was about 60 degrees. The sunroof on my 2010 mitsubishi outlander was not open but the safety screen was pushed back. As I was driving down a country road out of nowhere I heard a loud explosion. The noise IS what I would describe as a loud bang or gunshot like sound. I could feel pieces of glass fall down on top of me. When I looked up I could see that there was a substantial hole in my sunroof and all of the glass around the hole was shattered into a million pieces. Upon closer inspection of the glass upon stopping my car, it became clear that the glass was broken from the inside of the car with the glass blowing partially outward. There was no outside force that caused this to occur.
- Electrical system
I am having electrical issues that I thought were just in my steering column but now I am finding other issues throughout the vehicle. 1.) the steering wheel volume control either does not work or increases when the decrease button IS pushed. 2.) the stick control for signaling will not lock…
I am having electrical issues that I thought were just in my steering column but now I am finding other issues throughout the vehicle. 1.) the steering wheel volume control either does not work or increases when the decrease button IS pushed. 2.) the stick control for signaling will not lock the high beams on so if you need the extra light you would have to hold the stick back manually. 3.) the interior dome light will not always turn on/shut off.
- Unknown or other
When vehicle IS in stop-and-go traffic and air system IS on outside air, strong exhaust fumes enter the cabin of vehicle. Also when vehicle was traveling in regular highway traffic approximately 60 miles per hour and when the defroster or heater are on, strong exhaust fumes enter the vehicle…
When vehicle IS in stop-and-go traffic and air system IS on outside air, strong exhaust fumes enter the cabin of vehicle. Also when vehicle was traveling in regular highway traffic approximately 60 miles per hour and when the defroster or heater are on, strong exhaust fumes enter the vehicle cabin. This issue just started in the last month. The air filter and cabin filters have been changed in may. Routine maintenance IS kept up.
- Unknown or other
Paint on hood started to chip around 48,000 miles. each time I apply touch paint, the paint start to crack in the same area over from the touch up.the shiny gloss IS still there IS just the paint began to chip off. I have 60,000 miles on the car now and 2 new chips appear on the hood
- Electrical system · Engine
After getting my vehicle back from the dealer for fixing the 4B1 engine drive belt no more than 15 min driving on to the highway my car staled and died luckily I had my foot on the brake when it occurred, I got it to start back up by returning the engine over. 15 min again it preceded to do it two more times.
- Air bags
TL* the contact owned a 2010 mitsubishi outlander. The contact stated that the vehicle was involved in a front end collision while being operated over 60 mph. The contact stated that the air bags did not deploy. A police report was filed. The vehicle was towed to a salvage yard where it was deemed destroyed. The manufacturer and dealer were not contacted. The failure mileage was approximately 120,000.
- Power train
2010 mitsubishi outlander. consumer writes in regards to transmission problems. consumer has another vehicle correspondence in artemis. *ld the consumer requested to have any information pertaining to his vehicle's transmission sent to him in writing. updated 06/20/2017*js
- Engine and engine cooling › Exhaust system
TL* the contact owns a 2010 mitsubishi outlander. While the engine was idling, the odor of exhaust fumes was present in the cabin of the vehicle. The failure was not diagnosed or repaired. The dealer, sendell motors of greensburg, pa, was notified of the failure. The manufacturer was not notified. The failure mileage was 62,000.
- Service brakes · Unknown or other
Brakes which cause the vehicle not to move or move slower than 20mph. Fresno dealer was unable to be contacted for months. My wife has been frustrated with a vehicle that was supposed to be the one thing to keep our family safe. Traveling with our 2 children under the age of 2 has not felt safe in this vehicle.
- Unknown or other
4/08/2017, my car made a noise like someone had shot out my back windshield. I was stuck in traffic and I could not see exactly what had happened, neither could I exit off the interstate. I went about 20 yards and then heard another explosion like my glass had shattered. I was looking around to…
4/08/2017, my car made a noise like someone had shot out my back windshield. I was stuck in traffic and I could not see exactly what had happened, neither could I exit off the interstate. I went about 20 yards and then heard another explosion like my glass had shattered. I was looking around to see if I could see anything,i could not. I heard the glass still moving, something told me to slide back the cover of my sun roof a little. when I did, I saw that my sunroof had exploded. I did not get injured because I had the sunroof cover closed. what a nightmare. the mitsubishi dealer has agreed to fix the sunroof free of charge. my car has only 54,000 miles. I have been driving mitsubishi for 30 years and have never experienced anything like that.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11006081This Technical Service Bulletin instructs the dealer to update the Hands Free Module software to improve the Bluetooth connection when certain devices are connected to WiFi.
- 11003536Service Manual Revision - This Technical Service Bulletin provides corrections to the description of special tools used to install the oil seal within the Automatic Transaxle sections of the applicable Service Manuals.
- 11003535Service Manual Revision - This Technical Service Bulletin provides additions to the description of special tools used for removal of the drive belt within the Engine Mechanical (3.0L Engine) section of the applicable Service Manuals.
- 10240443This is a Dealer Letter sent to dealers informing that Mitsubishi Technical Training has launched the 3rd quarterly technician quiz for 2023.
- 10235609This Technical Service Bulletin provides instructions and material safety data sheets for removal of rap-film adhesive residue.
- 10235608This Technical Service Bulletin reviews the regulations that require a label showing the reduction in load carrying capacity be affixed to vehicles when the total net weight of accessories is more than 1.5 percent of the vehicle's gross vehicle weight rating (GVWR) or 100 lbs.
- 10235606This is a Dealer Letter sent to dealers informing that Mitsubishi Technical Training has launched the 2nd quarterly technician quiz for 2023.
- 10234004This Technical Service Bulletin instructs dealers to replace the seat adjuster assembly and power seat harness in affected vehicles with improved countermeasure parts.
- 10233997This Technical Service Bulletin contains technical information and troubleshooting for the accessory Remote Engine Start system for affected vehicles.
- 10233994This is a Technical Information Notice informing dealers and parts managers about possible causes after a customer complains that the engine will not start while using the remote start system.
- 10231410This TSB provides revisions to the Removal and Installation procedures for the rocker cover due to changes in the quantity of mounting bolts for vehicles equipped with 4B1 series engine. (Service Manual Revision)
- 10228919Tech Talk is a service newsletter that was sent out to dealers. It covers various topics and reviews the previous months publications.
- 10226082Tech Talk is a service newsletter that was sent out to dealers. It covers various topics and reviews the previous months publications.
- 10211530This Technical Service Bulletin was sent to dealers to explain the difference between normal dew condensation, which is a natural phenomenon, and water penetration caused by improper sealing or a defective/broken part.
- 10208837This Technical Service Bulletin was sent to dealers informing them to replace the Power Seat Side Shield and apply felt tape when customers complain the Power Seat Side Shield is coming off while entering/exiting the vehicle.
- 10207798This Technical Service Bulletin instructs dealers to apply Nonwoven Fabric Tape between the Seat Back and Urethane Pad when customers report a condition where an abnormal rubbing noise is heard from the Seat Back when a driver and/or passenger is seated in the front seat(s).
- 10203270This Technical Service Bulletin instructs dealers to replace the seat adjuster assembly and power seat harness in affected vehicles with improved countermeasure parts. Due to a change in the reclining motor, the new longer harness and connector are necessary.
- 10203267This Technical Service Bulletin instructs dealers to replace the seat adjuster assembly and power seat harness in affected vehicles with improved countermeasure parts. Due to a change in the reclining motor, the new longer harness and connector are necessary.
- 10200351This Technical Service Bulletin was sent to dealers informing them a shock absorber oil leak may result in replacement of absorbers unnecessarily when trace amounts of oil are noted to have adhered to the shock absorber.
- 10199125This Technical Service Bulletin was sent to dealers informing them a shock absorber oil leak may result in replacement of absorbers unnecessarily when trace amounts of oil are noted to have adhered to the shock absorber.
- 10191961This Technical Information Notice provides additional instructions to dealers when replacing the Valve Cover Gasket due to a customer concern of oil leaking.
- 10182303This Technical Service Bulletin was sent informing dealers an abnormal rubbing noise is heard from the Seat Back when a driver and/or passenger is seated in the front seat(s) and instructs dealers to apply Nonwoven Fabric Tape between the Seat Back and Urethane Pad.
- 10181899Revision to previous TSB SR-20-003 for the Crossmember recall. Added Warranty information for instances where subframe may fail and cause additional damage to unrelated parts. This bulletin provides directions for inspection and repair of affected vehicles' Crossmembers.
- 10181898Technical Information Notice sent to dealerships to advise ofrevision changes to TSB "SR-20-003REV_2"
- 10180973Revision to previous TSB SR-20-003 for the Crossmember recall. Added Warranty information for instances where subframe may fail and cause additional damage to unrelated parts. This bulletin provides directions for inspection and repair of affected vehicles' Crossmembers.
- 10180972Technical Information Notice sent to dealerships to advise ofrevision changes to TSB "SR-20-003REV_2"
- 10179680This Technical Information Notice was sent to dealerships to notify of a revised Safety Recall Bulletin SR-20-003REV_2 update regarding warranty information and entry of claims.
- 10179679This TSB was sent to dealers as an update to SR-20-003REV_1 issued in July 2020 and provides updates to the warranty information.
- 10179672This Technical Information Notice was sent to dealers informing that a recall campaign was released on July 22, 2020 (SR-20-003) for the Crossmember Corrosion.
- 10179524This Technical Information Notice was sent to dealers informing that a recall campaign was released on July 22, 2020 (SR-20-003) for the Crossmember Corrosion.
- 10179517This Technical Information Notice was sent to dealerships to notify of a revised Safety Recall Bulletin SR-20-003REV_2 update regarding warranty information and entry of claims.
- 10179516This TSB was sent to dealers as an update to SR-20-003REV_1 issued in July 2020 and provides updates to the warranty information.
- 10178989This bulletin provides directions for inspection and repair of affected vehicles' Crossmembers in the Safety Recall.
- 10178988This ATIN-20-SR-003D supersedes ATIN-20-SR-003C and ATIN-20-SR-003B, providing notification of modifications to the TSB and repair procedure; noting when a Crossmember replacement is required the anti-corrosive agent application is not required.
- 10178985This Advanced Technical Information Notice was sent to dealers as an update to ATIN-20-SR-003B informing that due to a parts availability delay of the Crossmember, customer vehicles requiring a replacement of the crossmember are unable to be completed at this time. Additionally, this notice informed dealers that an Interim Owner Notification Letter was mailed to affected owners on July 17th, 2020 to inform customers that MMNA is making every effort to establish a remedy and will contact them again by mail with a follow-up recall notice once parts are in stock and the final remedy is available.
- 10178984This Letter was sent to customers informing them of the launch of Recall SR-20-003, part are currently unavailable; but they will be notified when parts become availble for repairs to begin. This notice also provided customers instruction on how to obtain repairs.
- 10178224This bulletin provides directions for inspection and repair of affected vehicles' Crossmembers in the Safety Recall.
- 10178223This ATIN-20-SR-003D supersedes ATIN-20-SR-003C and ATIN-20-SR-003B, providing notification of modifications to the TSB and repair procedure; noting when a Crossmember replacement is required the anti-corrosive agent application is not required.
- 10178220This Advanced Technical Information Notice was sent to dealers as an update to ATIN-20-SR-003B informing that due to a parts availability delay of the Crossmember, customer vehicles requiring a replacement of the crossmember are unable to be completed at this time. Additionally, this notice informed dealers that an Interim Owner Notification Letter was mailed to affected owners on July 17th, 2020 to inform customers that MMNA is making every effort to establish a remedy and will contact them again by mail with a follow-up recall notice once parts are in stock and the final remedy is available.
- 10178219Interim Customer Notification Letter for Recall SR-20-003 - Crossmember
Every Mitsubishi Outlander model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.