1998 Toyota Celica

Recalls

1 recall names the 1998 Toyota Celica. Newest first.

• Air bags › Frontal › Driver side › Inflator module

  Jan 22, 2020NHTSA 20V033000138,842 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 1998-2000 RAV4, 1998-1999 RAV4 EV and Celica and 1997-1998 Supra vehicles. These vehicles were equipped with Non-Azide Driver air bag Inflators (NADI) and do not contain phase stabilized ammonium nitrate (PSAN) propellant. Due to a manufacturing issue, the NADI inflators may absorb…

  Risk and remedy

  Risk

  In the event of a crash necessitating air bag deployment, an inflator rupture may result in metal fragments striking the driver or other occupants. An underinflated air bag may not properly protect the occupant, and increases the risk of serious injury or death.

  Remedy

  Toyota will notify owners, and owners will have the option to self-inspect, or have a dealer inspect the steering wheel on their vehicle to determine if their vehicle may be equipped with an affected inflator. Potentially affected steering wheel serial numbers will be inspected by a dealer. Based on the inspection, dealers will replace the front driver air bag inflator with an alternate one, as necessary. These repairs will be performed free of charge. The recall began August 28, 2020. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's numbers for this recall is 20TB01 and 20TA01.

  Full recall details →

Owner complaints

What owners report most

1. Engine and engine cooling2
2. Structure2
3. Air bags1
4. Fuel/propulsion system1
5. Tires1
6. Visibility1

Latest complaints

• Mar 9, 2020VA188,000 mi
  Air bags · Fuel/propulsion system

  Toyota has failed to notify me of the faulty airbag recall and has failed to fix the faulty airbag and in addition, my car IS stalling without cause.

• Sep 15, 2010FL24,000 mi
  Tires
  TL* the contact owns cooper life liner sle tires p205/55r 15 on a 1998 toyota celica. the contact stated while driving 65 mph the vehicle started shaking randomly, so the contact pulled over to the side of the road. the contact looked at the tires and saw no damages. the contact rubbed her hand…

  TL* the contact owns cooper life liner sle tires p205/55r 15 on a 1998 toyota celica. the contact stated while driving 65 mph the vehicle started shaking randomly, so the contact pulled over to the side of the road. the contact looked at the tires and saw no damages. the contact rubbed her hand on the front driver's side tire and notice a bubble had develop on the inside tread. the contact replaced the tire with the spare and took the vehicle to a dealer. the dealer notice the tread separation on the front driver's side tire and recommended the tire be replaced. the dealer informed the contact they do not supply a warranty on cooper tires due to the problems they have and they do not sale that brand. the contact called the manufacturer regarding the tires and the manufacturer stated they will only cover what IS left of the tread on the tires. The contact stated the manufacturer should replaced the tires since this IS a manufacturer defect and does not feel safe driving with the three remaining tires on the vehicle. the failure mileage was 24,000.

• Oct 13, 2003TX
  Structure › Body › Roof and pillars
  The rear window of the convertible was designed such that raising and lowering the automatic top was not given enough clearance. As a result the back window of the vehicle repeatedly rubs against the sharp top of the rear seat upon opening and closing. This causes the rear window to disengage from…

  The rear window of the convertible was designed such that raising and lowering the automatic top was not given enough clearance. As a result the back window of the vehicle repeatedly rubs against the sharp top of the rear seat upon opening and closing. This causes the rear window to disengage from the glue that adheres it in place and consequently fall out. Many reports have been filed to toyota dealers and they refuse to cover any such defects. The only solution they propose IS taking the car to a third party auto top repair service to have the entire window replaced for a fee of $700 dollars. *la

• Oct 16, 2002CA
  Engine and engine cooling › Engine · Engine and engine cooling › Engine › Gasoline · Structure › Body › Hood

  Driving for 10 minutes in the car threw a rod, cracked the block, sheards of metal thru oil pan & water coolant system. also rod dented hood so body work being required. over $5500 damage on a 4 year old car! mr

• Apr 14, 2000MD
  Visibility › Windshield wiper/washer

  Windshield motor was working but the wiper blades were not operable. consumer contacted the dealership, and they told her that warranty had expired. *ak

Defect investigations

NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.

• Engine seizure

  DP02004Opened Apr 30, 2002Closed Jun 20, 2002

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10214323TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions
• 10207946POL: This consolidated Tire Warranty Guide contains the complete warranty terms for all brands of ground and spare tires currently in use by Toyota. This information must be kept near the point of vehicle sale and be available to any customer that requests it. Customers can find this information on the Owner?s section of Toyota.com. Dealers can locate a copy of this guide on the Claims Processing & Resource Center in Dealer Daily as well.
• 10197476Replacement vin plates.
• 10197473Product general information.
• 10190460Toyota Safety Recall and Service Campaign - Technician Certification Requirements
• 10190453TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
• 10188913TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2021 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10187241TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
• 10186195TT: Some Toyota vehicles installed with Toyota Complete Maintenance Care (TCMC) brake pads may exhibit a groan or squeak noise in various driving conditions.
• 10174891TSB: OBSOLETE NOTICE April 07, 2020: This bulletin is now obsolete. Please see T-SB-0032-20. Replacement Certification Labels and VIN Plates
• 10174890TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, T-SB-0144-08, and T-SB-0304-17. The aforementioned bulletins are obsolete, and any printed versions should be discarded. Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2020 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10152205TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes SB No. T-SB-0101-11. Applicability has been updated to include 2016 ? 2017 model year vehicles. Service Bulletin No. T-SB-0101-11 is Obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
• 10145776Update on Technician Certification Requirements.
• 10145749Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
• 10145748Technical Service Bulletin: OBSOLETE NOTICE: July 31, 2018: This bulletin is now obsolete. Please see T-SB-0304-17.
• 10143953TSB: REVISION NOTICE July 31, 2018 Rev2: ? The Supersession Notice has been updated. January 11, 2018 Rev1: ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, PG006-01, PG004-97, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin. Replacement Certification Label and VIN Plate Criteria A replacement certification label and/or VIN plate may be requested if: ? The vehicle was in an accident and the label and/or plate is damaged or attached to a part that will be replaced during the repair. ? The label and/or plate was stolen.
• 10133915Toyota vehicles are equipped with SRS, including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pretensioner devices did not perform as expected, please follow the steps in the recommendations section below.
• 10133649TSB: OBSOLETE NOTICE November 21, 2017: This bulletin is now obsolete. Please see T-SB-0304-17.
• 10132812Tech Tip: Low battery voltage can contribute to a MIL "ON" condition for P0335 (Crankshaft Position Sensor Circuit) and/or P0340 (Camshaft Position Sensor Circuit) due to inconsistent rotational speed of the engine's crankshaft.
• 10132410TSB: REVISION NOTICE July 20, 2017 Rev1: Applicability has been updated to exclude 2007 ? 2017 model year Avanza vehicles. Some hazardous material treatment and handling regulations at the state and local level define the pre-disposal deployment of airbag and pre-tensioner assemblies as hazardous material treatment. Hazardous material treatment may require special training, certification or licensing in certain areas. TMS recommends that dealership personnel carefully review and follow ALL local and state regulations, and where necessary, contract with Environmental Protection Agency (EPA) Licensed Hazardous Waste Transportation and Disposal facilities.
• 10132295This bulletin is now obsolete. Please see T-SB-0054-13.
• 10132287California (CA), Federal (FED), and 50 State Certified emission control underhood labels (emission labels) may be obtained through your dealership?s Parts Department utilizing standard replacement parts ordering procedures. Follow the guidelines outlined in this bulletin to ensure proper label application.
• 10132136The appearance of spots in tempered glass (when viewed at certain angles) is the result of the heat treating and quick quenching process during manufacturing.
• 10132084The purpose of this service bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL ?ON,? shifting issues, and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly
• 10132055Beginning in 1998, Toyota introduced side airbags as optional equipment. Toyota does NOT recommend replacement of original seat covers with non-Toyota leather or other seat cover materials on vehicles due to the following: Seat covers NOT recommended by Toyota may affect side airbag performance, in general or in part, during an accident. Modifications that negatively affect side airbag performance can result in severe occupant injuries. Seat covers are an integral part of this safety system. Replacing fabric seat covers with non-Toyota leather or other seat cover materials may compromise the effectiveness of this safety system. The design of the seat is complex, integrating safety and strength with comfort and luxury. Toyota strongly discourages modifying original equipment seats that have optional side airbags. Additionally, Toyota strongly advises against the installation or use of aftermarket seat covers, which could impair the performance of the side airbags in the event of an accident.
• 10131993This bulletin is now obsolete. Please see T-SB-0185-13.
• 10131988The following procedures are recommended during routine maintenance or in the event of a customer concern for wiper performance.
• 10131984A new Special Service Tool (SST 09709-00002) has been introduced to aid in the inspection procedure for certain vehicles equipped with a floor pedal-type parking brake system. This bulletin references the correct method for installing the Brake Pedal Force Gauge. Refer to the appropriate Repair Manual for parking brake pedal travel inspection and adjustment specification.
• 10131961Toyota vehicles are equipped with Supplemental Restraint Systems (SRS), including various airbags and in some models, seat belt pre-tensioners, to help reduce the risk of injury in a collision. If a customer expresses any concerns that the SRS airbags or pre-tensioner devices did not perform as expected (including an unintended deployment event), please follow the steps in the recommendations section below.
• 10131713TSB: SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08. Service Bulletin Nos. PG021-88, PG015-89, PG0015-90, PG002-91, PG002-93, PG005-97, PG007-01, PG007-07, and T-SB-0144-08 are obsolete and any printed versions should be discarded. Be sure to review the entire content of this bulletin before proceeding. REVISION NOTICE January 11, 2018 ? The Supersession Notice has been updated. Any previous printed versions of this bulletin should be discarded. Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
• 10123420TSB: Vehicle replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) may be available from Toyota, provided the request meets one of the criteria listed in this Service Bulletin.
• 10111390TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
• 10111197TSB: When servicing interior electrical switches and components, please note the precautions in this bulletin to avoid damaging electrical components and switches. Many lubricants, cleaners, and automotive chemicals contain silicone or other compounds that may contaminate electrical contacts, and therefore increase electrical resistance and decrease switch performance. The use of any cleaners or fluids may increase the risk of further damage to electrical components.
• 10109492TSB: The purpose of this bulletin is to provide precautions to follow when installing an automatic transmission/transaxle assembly to avoid MIL "ON" shifting issues and/or transmission damage. Use the information in this bulletin when installing an automatic transmission/transaxle assembly.
• 10109404TSB: The purpose of this service bulletin is to provide information regarding the installation of the correct torque converter bolts during automatic transmission/transaxle assembly replacement. Incorrect torque converter bolts or missing washers can cause damage to the torque converter assembly.
• 10062051Summary to be provided on a future date.
• 10061620Summary to be provided on a future date.
• 10061578Summary to be provided on a future date.
• 10042555Toyota: information provided for replacing the seat covers for vehicles equipped with side airbags.

Every Toyota Celica model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.