2013 Toyota Prius V

Recalls

3 recalls name the 2013 Toyota Prius V. Newest first.

• Hybrid propulsion system

  Oct 4, 2018NHTSA 18V684000807,329 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2014 Toyota Prius and 2012-2014 Toyota Prius V vehicles. Excessive voltage in the Intelligent Power Module (IPM) within the inverter may cause the hybrid system to shut down, causing the vehicle to stall while being driven.

  Risk and remedy

  Risk

  If the hybrid system shuts down unexpectedly, it can increase the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will update the software for the motor/generator control electronic control unit (ECU) and the hybrid control ECU as necessary, free of charge. The recall began January 22, 2019. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0V. Note: The software updates in this recall are needed even if the vehicle had the software previously updated under recalls 14V-053 or 15V-449.

  Full recall details →

• Hybrid propulsion system › Inverter

  Jul 15, 2015NHTSA 15V449000108,624 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2012-2014 Prius V vehicles manufactured August 22, 2011, to June 30, 2014. A component within the hybrid inverter assembly may overheat, causing the hybrid system to reduce output power allowing the vehicle to only drive a short distance. In some circumstances, the hybrid…

  Risk and remedy

  Risk

  The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. The hybrid system could also shut down completely resulting in a vehicle stall, increasing the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will update the software for the motor/generator control electronic control unti (ECU) and the hybrid control ECU, free of charge. The recall began on July 30, 2015. Owners may contact Toyota customer service at 1-888-270-9371.

  Full recall details →

• Exterior lighting › Tail lights

  Dec 12, 2013NHTSA 13E070000409 vehiclesEquipment

  Genera Corporation (Genera) is recalling certain aftermarket replacement tail lights, model 11-6468-00 (driver-side), and model 11-6467-00 (passenger-side), sold for use on 2012-2013 Toyota Prius V vehicles. The brake light and tail light circuits are switched causing the brake lights to be illuminated continuously until the brake pedal is pressed, when…

  Risk and remedy

  Risk

  The reversed tail lamp function reduces the ability to warn other motorists of the driver's intentions, increasing the risk of a crash.

  Remedy

  Genera will notify owners and provide replacement aftermarket tail lamps, free of charge. The recall began on January 23, 2014. Owners may contact Genera at 1-888-963-9888. This recall is being conducted by Genera Corporation, not by Toyota Motor Corporation.

  Full recall details →

Owner complaints

What owners report most

1. Service brakes64
2. Electrical system16
3. Engine15
4. Unknown or other9
5. Fuel/propulsion system9
6. Power train7
7. Exterior lighting7
8. Vehicle speed control6
9. Air bags6
10. Service brakes, hydraulic4

Latest complaints

• Oct 1, 2026IL
  Air bags · Electrical system · Unknown or other

  Airbag light remains on and horn has also stopped working.

• Jul 17, 2026MD
  Service brakes
  My Prius had brake warning lights come on around December 2025. Turns out the brake accumulator had an internal leak. After doing some research, I discovered this was a known brake booster issue that Toyota has not issued a recall on. They do have an extended warranty program, but my vehicle did…

  My Prius had brake warning lights come on around December 2025. Turns out the brake accumulator had an internal leak. After doing some research, I discovered this was a known brake booster issue that Toyota has not issued a recall on. They do have an extended warranty program, but my vehicle did not qualify. The warning lights did not come on until after the 10 years or 150k miles cutoff for the warranty. Toyota's refusal to issue a recall and limits of their warranty program are clearly a move to avoid paying for repairs incurred as a result of defective manufacturing. Why should I be ineligible for reimbursement just because my vehicle is 13 years old rather than 10? Please make Toyota issue a recall or extend their Customer Support Program No. POL18-03.

• May 1, 2026OR
  Service brakes
  Suddenly Cars Brakes failed with vehicle almost lunged forward. I had to slam the brakes heavily for it to stop; Took the vehicle to Toyota Service and clearly its a QUALITY issue toyota acknowledged as a know problem with error code C1391. They even had customer support program 20TE07…

  Suddenly Cars Brakes failed with vehicle almost lunged forward. I had to slam the brakes heavily for it to stop; Took the vehicle to Toyota Service and clearly its a QUALITY issue toyota acknowledged as a know problem with error code C1391. They even had customer support program 20TE07 acknowledging it as their issue; I almost got killed for this. The repair costs are abnormally high at 4900$'s putting me a financial burden also and currently unsafe car; Toyota - they literally KNOW THIS ISSUE and still put me at risk. They are refusing any kind of assistance to help too.

• Apr 23, 2026ME
  Chest clip, buckle, harness
  The harness webbing/strap on the Evenflo Revolve360 Slim tore without any known incident or accident causing the damage. The defect was discovered on April 15, 2026 when the seat was temporarily removed from the vehicle. Upon inspection, the harness strap was found to be nearly completely torn…

  The harness webbing/strap on the Evenflo Revolve360 Slim tore without any known incident or accident causing the damage. The defect was discovered on April 15, 2026 when the seat was temporarily removed from the vehicle. Upon inspection, the harness strap was found to be nearly completely torn through and would likely not have restrained the child occupant in the event of a crash. The seat had been in regular use and had not been involved in any collision. No unusual event or misuse is known to have caused the failure. It is suspected that the rotating mechanism of the seat placed repeated stress on the harness webbing over normal use, causing it to deteriorate and tear. The seat has not yet been inspected by the manufacturer, law enforcement, or insurance representatives, but is available for inspection upon request. The seat has been taken out of service and is not being used.

• Apr 17, 2026NY120,000 mi
  Service brakes, hydraulic
  The contact owns a 2013 Toyota Prius V. The contact stated that while pulling out of a parking space at approximately 15 MPH and depressing the brake pedal, the brake pedal felt spongy, but the vehicle responded as intended. The brake, the ABS, the traction control warning lights, and an unknown…

  The contact owns a 2013 Toyota Prius V. The contact stated that while pulling out of a parking space at approximately 15 MPH and depressing the brake pedal, the brake pedal felt spongy, but the vehicle responded as intended. The brake, the ABS, the traction control warning lights, and an unknown warning light were illuminated. The contact scanned the vehicle with a code reader and retrieved diagnostic trouble codes for the brake booster and brake accumulator systems failure. The contact related the failure to the Toyota Customer Satisfaction Program: 20TE07 (Certain 2012 - 2014 Model Year Prius V Coverage for Brake Booster and Brake Booster Pump Assemblies). The manufacturer was contacted and informed the contact that the vehicle was no longer covered because the 10-year limit was exceeded. The contact was referred to the dealer, who provided an estimate for the repair. The vehicle was not repaired. The failure mileage was approximately 120,000.

• Apr 14, 2026MA
  Power train › Axle assembly
  The contact owns a 2013 Toyota Prius V. The contact stated that while in reverse(R), the rear driver’s side tire became flat. Upon inspection, it was discovered that the rear axle had fractured due to rusting and corrosion, and had punctured the rear passenger’s side tire. The vehicle was towed to…

  The contact owns a 2013 Toyota Prius V. The contact stated that while in reverse(R), the rear driver’s side tire became flat. Upon inspection, it was discovered that the rear axle had fractured due to rusting and corrosion, and had punctured the rear passenger’s side tire. The vehicle was towed to the local mechanic, who diagnosed that the rear axle was rusted and corroded and needed to be replaced. The vehicle was not yet repaired. The manufacturer and local dealer were notified of the failure, but no assistance was provided. The failure mileage was unknown.

• Apr 5, 2026VA
  Service brakes
  When I'm in the car, the brake booster keeps recharging with out touching the brake pedal. Also, the car has problems when I apply the brakes while driving. They make a hissing and popping noise and the braking is spongy. I have had braking warning lights come on as well. It is similar to what…

  When I'm in the car, the brake booster keeps recharging with out touching the brake pedal. Also, the car has problems when I apply the brakes while driving. They make a hissing and popping noise and the braking is spongy. I have had braking warning lights come on as well. It is similar to what others have been describing as the brake booster and pump actuator issue with these Prius V cars. This has been happening ongoing for about two years or so. I called the Toyota dealership and they would not check it out for free or remedy the issue that was part of their Customer Support Program (Policy 13V-235) for booster pump issues.

• Feb 13, 2026KS
  Service brakes

  Spontaneous failure of brake actuator system.

• Jan 27, 2026FL
  Forward collision avoidance › Automatic emergency braking · Service brakes
  Upon a hard (but not emergency) brake, my ABS and brake warning lights came on and my car began whirring once every few seconds. I immediately took the car to the Toyota dealership, who informed me that my master brake cylinder and booster had to be replaced, and that issues with the booster were…

  Upon a hard (but not emergency) brake, my ABS and brake warning lights came on and my car began whirring once every few seconds. I immediately took the car to the Toyota dealership, who informed me that my master brake cylinder and booster had to be replaced, and that issues with the booster were something they had seen frequently in this generation of Priuses. I paid $5095 for repairs and inspection, but I had no other choice, as my brakes could have gone out at any moment whilst I was on the road and caused a very serious accident.

• Jan 20, 2026OH
  Forward collision avoidance › Automatic emergency braking · Service brakes
  The brake actuator and compressor is having repeated problems and causing the brakes to lock up completely while driving both in city and ON THE HIGHWAY. Abs/parking/normal brakes The lights on the dash all start flashing and beeping. ABS / emergency brake / exclamation warning / sliding / lights…

  The brake actuator and compressor is having repeated problems and causing the brakes to lock up completely while driving both in city and ON THE HIGHWAY. Abs/parking/normal brakes The lights on the dash all start flashing and beeping. ABS / emergency brake / exclamation warning / sliding / lights all on It also caused the speedometer to stop working and most of the lights of the computer part of my dash to not display information Problem code 1391 confirmed by mechanic This is a danger to me and other drivers and Toyota needs to take responsibility for these repairs because it can cost us our lives.

• Jan 8, 2026GA
  Service brakes

  Brake booster failure

• Dec 22, 2025CA
  Service brakes

  The ABS brake actuator in my 2013 Prius V failed at just over 91,000 miles in December 2025, making the vehicle unsafe to drive. I understand that this is a known issue with this model of vehicle.

• Dec 6, 2025NC
  Service brakes
  Upon acceleration, several brake related warning lights came on along with a consistent chime. When it came time to stop. The vehicle would not stop then with great pressure on the pedal, I was able to slow the vehicle narrowly avoiding a collision with another vehicle. The vehicle then drove…

  Upon acceleration, several brake related warning lights came on along with a consistent chime. When it came time to stop. The vehicle would not stop then with great pressure on the pedal, I was able to slow the vehicle narrowly avoiding a collision with another vehicle. The vehicle then drove normal after that and a few minutes later the lights went out. When I got home, I scanned for codes and got C1252 and C1256. This appears to be a common problem with these vehicles that Toyota does not want to address.

• Nov 14, 2025NC
  Electrical system · Forward collision avoidance › Automatic emergency braking · Service brakes
  Brake actuator failure requires actuator and master cylinder replacement. All dash lights came on while driving. The vehicle was diagnosed at Brian Easler Toyota in Hendersonville North Carolina. The brakes are still operational temporarily but spongy and expected to fail so the car is not…

  Brake actuator failure requires actuator and master cylinder replacement. All dash lights came on while driving. The vehicle was diagnosed at Brian Easler Toyota in Hendersonville North Carolina. The brakes are still operational temporarily but spongy and expected to fail so the car is not drivable. I expect to have the actuator and master cylinder replaced in then next few weeks at a cost of $5600. I see there were previous recalls on the braking system that have now expired.

• Oct 31, 2025TX
  Forward collision avoidance › Automatic emergency braking · Service brakes

  The brakes suddenly failed in our 2013 Prius V while she was driving with our two young children. It was extremely scary, and very dangerous. Toyota has known about the braking system issues for years but refused to offer a recall to avoid costs. This needs to be immediately addressed.

• Oct 31, 2025TX
  Electrical system · Service brakes
  2013 toyota prius V. 64,000 miles and ABS Light is on also VSC warning light and brake light. There has been many issues with this type of vehicle as i researched on internet. I didnt know there has been a recall on this vehicle. And i did not make it time. 10 yrs or 150,000 k whichever comes…

  2013 toyota prius V. 64,000 miles and ABS Light is on also VSC warning light and brake light. There has been many issues with this type of vehicle as i researched on internet. I didnt know there has been a recall on this vehicle. And i did not make it time. 10 yrs or 150,000 k whichever comes first. many other vehicles this year have this problem its common.. i cannot brake in time because now its using my back brakes. Dealership said brake booster pump and brake master cylinder.

• Oct 28, 2025SC
  Service brakes
  Returning from a trip, several brake and skid related dashboard light illuminated. I pulled over and was able to stop the car and took it directly to the Toyota dealership after calling them. Brakes felt very spongy and stopping distance was increased. The dealer informed me that this was a known…

  Returning from a trip, several brake and skid related dashboard light illuminated. I pulled over and was able to stop the car and took it directly to the Toyota dealership after calling them. Brakes felt very spongy and stopping distance was increased. The dealer informed me that this was a known problem with my model but that I was not eligible for recall or extended warranty. I have also seen a number of complaints of this issue on the internet. The cost to repair the issue was over $4800.

• Oct 11, 2025TX
  Service brakes · Suspension
  ABS and brake lights suddenly turned on and brake pedal effectiveness changed dramatically. When pressing brake pedal the brakes barely work now. Just got quoted $5161 for ABS accumulator repair, $2336 for major suspension concern, and total $8386 estimate for repairs from Toyota service…

  ABS and brake lights suddenly turned on and brake pedal effectiveness changed dramatically. When pressing brake pedal the brakes barely work now. Just got quoted $5161 for ABS accumulator repair, $2336 for major suspension concern, and total $8386 estimate for repairs from Toyota service department. I see many similar complaints from Toyota owners online, this seems to be a common issue with Prius vehicles. The Kelly blue book value is only $5450 for trade-in and $7318 for sale to private owner, so the repair doesn’t even seem worthwhile given a replacement would be cheaper, and the ABS failure happens so frequently in this vehicle, and could happen again.

• Sep 5, 2025MS
  Service brakes

  All ABS, Brakes light on, code 139. Its been making a buzzing noise for a couple of years, the noise got shorter over time, and finally was coming on every 5 second, and finally the dash brake lights came on. I've cleared a couple of times, but the lights come back on after a few miles. The brake pedal has to be pushed down hard to stop. The problem is the brake part is $1500, and 1500 to install.

• Aug 31, 2025KY
  Service brakes
  Prior to issue, noticed a buzzing sound from engine compartment, later known to be the ABS accumulator pump, occurring more frequently - first multiple times when braking, then later continuously while driving. Dashboard eventually lit all brake-related warning lights ("BRAKE", TSC, ABS) and brake…

  Prior to issue, noticed a buzzing sound from engine compartment, later known to be the ABS accumulator pump, occurring more frequently - first multiple times when braking, then later continuously while driving. Dashboard eventually lit all brake-related warning lights ("BRAKE", TSC, ABS) and brake pedal behavior changed markedly. This occurred after parking in my driveway while engaging the parking brake. Brake behavior during and after this period was wildly inconsistent and impossible to predict. At times the brakes would perform normally, but most often the first portion of brake pedal travel would have no braking effect, and actual required force on the pedal to brake was greatly increased. The need to press further and with more force created a dangerous situation as it delayed how quickly I could slow or stop. The inconsistency in performance created a dangerous situation as the vehicle may (and did) sometimes stop more suddenly than expected. Additionally, the failure resulted in loss of traction control and ABS resulting in greatly increased risk in wet road conditions and terrible danger in sudden-stop situations. Self scanner & Toyota service center confirmed presence of C1392 code and recommended replacing brake actuator and brake pump assemblies, quoting over $4,500. Service was declined and replacement parts bought from Toyota and self-installed to resolve issue. Both Toyota service center and Toyota customer support line confirmed that this issue was described in an existing Customer Support Bulletin but that coverage was denied due to age of the vehicle. Vehicle was approximately 15,000 miles below listed mileage cap but approximately 12 years old, with Toyota denying service for vehicles over 10 years old.

• Aug 7, 2025IN
  Service brakes
  While driving on the highway, all the Brake-Related Warning Lights appeared on the dashboard. This was accompanied by a frequent electric buzzing noise (every 15-20 seconds, lasting two seconds each time). The brakes became difficult to press, almost spongy, and required more pressure to function.…

  While driving on the highway, all the Brake-Related Warning Lights appeared on the dashboard. This was accompanied by a frequent electric buzzing noise (every 15-20 seconds, lasting two seconds each time). The brakes became difficult to press, almost spongy, and required more pressure to function. Upon taking it to the dealer, I was told that the vehicle (a 2013 Prius V with 181k miles) needed a new ABS pump and brake actuator, totaling roughly $4100.

• Jul 20, 2025PA
  Service brakes
  The brake accumulator has failed on our 2013 Prius at 170K miles. The brakes are unresponsive and all brake-related indicator lights are on. The vehicle is unsafe. This is a known issue for this model and year Prius, yet Toyota did not issue a recall. Warranties were extended to 150K miles, but…

  The brake accumulator has failed on our 2013 Prius at 170K miles. The brakes are unresponsive and all brake-related indicator lights are on. The vehicle is unsafe. This is a known issue for this model and year Prius, yet Toyota did not issue a recall. Warranties were extended to 150K miles, but this issue is a serious safety risk - danger to us and others on the road. This issue should have resulted in a safety recall, not a "courtesy" warranty extension. Toyota needs to resolve this for all affected vehicles.

• Jul 7, 2025MS
  Electrical system · Fuel/propulsion system · Service brakes

  2013 toyota prius v has 3 recalls for the same issues but my vin # says there isn't any recalls associated with it. I need help. It stalled on me on my way home from work luckily not on the high way now it's throwing code c1310 c1259 c1241 it won't crank all it does is click. I replaced 12v batterychecked all connectors.

• Jun 9, 2025CA
  Service brakes

  I was driving at normal highway speed, all of a sudden, my dashboard lights (4) lit up. Warning lights, Brake lights, Transaction lights and ABS lights all appeared at once. There was some traffic up ahead, so I applied my brakes but noticed that they weren't as responsive as normal so had to adjust for it by applying more pressure than normal to come to a stop.

• May 27, 2025DC
  Service brakes
  For the last few months, our brakes seem to have been making "extra" noises, but not palpably struggling to function. After driving roughly 45 minutes via high speed Interstate, parking, and then restarting the car, ALL the brake-related lights suddenly came on ((1)Brake, (2)ABS, (3)VSC, and…

  For the last few months, our brakes seem to have been making "extra" noises, but not palpably struggling to function. After driving roughly 45 minutes via high speed Interstate, parking, and then restarting the car, ALL the brake-related lights suddenly came on ((1)Brake, (2)ABS, (3)VSC, and (4)(!)). We took it slowly, off highway, w hazards on, and lots of space between other cars to the dealership. This felt scary because, although the brakes were making some strange noises, there was no way of knowing what the warning lights were specifically indicating, or if the brakes would go out. The Alexandra Toyota dealership confirms a code C1391, "abnormal leak in the Accumulator" and requires "replace brake master cylinder kit and brake booster pump assembly" This was addressed in a Toyota "customer support program": [XXX] but our car is not covered despite having less than 80,000 miles on it. In Toyota's own words this is an "internal malfunction" and ought to be covered by a full recall. As it stands, owners' vehicles would have had to show symptoms within a tiny 2.5 year window, and it's evident online that many others have experienced failures outside of that window. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
• 10245488Ti: technical instructions for limited service campaign K0P customer support program 19te12 safety connect system ? Vehicle location inaccurate certain 2013 ? 2019 model year 4runner 2011 ? 2017 model year land cruiser 2013 ? 2017 model year prius 2012 ? 2017 model year prius v 2016 ? 2017 model year mirai updated 010/25/2023
• 10245487DP: The Data Communication Module (DCM) in the subject vehicles are equipped with software to identify the location of the vehicle using the Global Positioning System (GPS) to support features of the Safety Connect system. Due to incorrect programming in the DCM software, after November 2nd, 2019, the GPS coordinates for this system will be calculated incorrectly. This will cause the system to use incorrect vehicle coordinates if one of the system?s features is activated.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10240056DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.
• 10240055DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10235232DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.
• 10235231DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.
• 10235230TSB: Some 2010 ? 2015 model year Prius and 2012 ? 2017 model year Prius V vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A94, P324E, P0A1A, and/or P3004, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.
• 10235229TSB: Some 2010 ? 2015 model year Prius and 2012 ? 2017 model year Prius V vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A7A and/or P0A78, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.
• 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10230356TI: 19TE12 Expired on December 1, 2022
• 10230355DP: Customer Support Program 19TE12 expired December 1, 2022.
• 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10227916DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above.

Every Toyota Prius V model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.