2014 Toyota Prius V

Recalls

4 recalls name the 2014 Toyota Prius V. Newest first.

• Hybrid propulsion system › Inverter

  Jun 24, 2020NHTSA 20V369000266,638 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2013-2015 Prius and 2014-2017 Prius V vehicles not included in recall 18V-684. Excessive voltage in the Intelligent Power Module (IPM) within the inverter may cause the hybrid system to shut down, causing the vehicle to stall while being driven.

  Risk and remedy

  Risk

  An unexpected hybrid power system shut down may increase the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will perform a software update for the hybrid system. If the vehicle has experienced an inverter failure with certain hybrid system faults related to this condition, the inverter assembly will be repaired or replaced, prior to software update. All repairs will be performed free of charge. This recall began July 24, 2020. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is 20TB10 / 20TA10.

  Full recall details →

• Hybrid propulsion system

  Oct 4, 2018NHTSA 18V684000807,329 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain 2010-2014 Toyota Prius and 2012-2014 Toyota Prius V vehicles. Excessive voltage in the Intelligent Power Module (IPM) within the inverter may cause the hybrid system to shut down, causing the vehicle to stall while being driven.

  Risk and remedy

  Risk

  If the hybrid system shuts down unexpectedly, it can increase the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will update the software for the motor/generator control electronic control unit (ECU) and the hybrid control ECU as necessary, free of charge. The recall began January 22, 2019. Owners may contact Toyota customer service at 1-888-270-9371. Toyota's number for this recall is J0V. Note: The software updates in this recall are needed even if the vehicle had the software previously updated under recalls 14V-053 or 15V-449.

  Full recall details →

• Hybrid propulsion system › Inverter

  Jul 15, 2015NHTSA 15V449000108,624 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2012-2014 Prius V vehicles manufactured August 22, 2011, to June 30, 2014. A component within the hybrid inverter assembly may overheat, causing the hybrid system to reduce output power allowing the vehicle to only drive a short distance. In some circumstances, the hybrid…

  Risk and remedy

  Risk

  The vehicle may enter a fail-safe/limp-home mode that limits the drivability of the vehicle. The hybrid system could also shut down completely resulting in a vehicle stall, increasing the risk of a crash.

  Remedy

  Toyota will notify owners, and dealers will update the software for the motor/generator control electronic control unti (ECU) and the hybrid control ECU, free of charge. The recall began on July 30, 2015. Owners may contact Toyota customer service at 1-888-270-9371.

  Full recall details →

• Air bags

  Jan 16, 2015NHTSA 15V0130004,971 vehicles

  Toyota Motor Engineering & Manufacturing (Toyota) is recalling certain model year 2014-2015 Toyota Prius V vehicles manufactured November 7, 2013, to January 7, 2015. The occupant classification system (OCS) that activates or deactivates the passenger seat air bag system may be improperly calibrated. As a result, the passenger air bag may not deploy in a…

  Risk and remedy

  Risk

  If the air bag does not deploy as intended, there is an increased risk of injury in the event of a crash.

  Remedy

  Toyota will notify owners, and dealers will re-calibrate of the OCS system, free of charge. The recall began February 12, 2015. Owners may contact Toyota customer service at 1-800-331-4331.

  Full recall details →

Owner complaints

What owners report most

1. Service brakes38
2. Electrical system15
3. Engine13
4. Unknown or other12
5. Fuel/propulsion system10
6. Vehicle speed control8
7. Service brakes, hydraulic6
8. Structure4
9. Power train4
10. Wheels3

Latest complaints

• Sep 8, 2026FL
  Service brakes
  The vehicle is experiencing a critical failure of the Brake Actuator and Booster Pump assembly. The dashboard currently displays multiple warning indicators: ABS light, Traction Control light, and the Brake System Warning light (Master Warning "!"). Symptoms: Mechanical Failure: The internal…

  The vehicle is experiencing a critical failure of the Brake Actuator and Booster Pump assembly. The dashboard currently displays multiple warning indicators: ABS light, Traction Control light, and the Brake System Warning light (Master Warning "!"). Symptoms: Mechanical Failure: The internal high-pressure accumulator is failing to hold pressure. The electric brake booster pump is heard cycling every 10-20 seconds even when the vehicle is stationary and the brake pedal is not depressed. Loss of Braking Safety Features: The system has disabled regenerative braking and Anti-lock Braking (ABS), causing significantly increased stopping distances and a “spongy" brake pedal feel with diminished braking response. Predictability of Failure: This failure matches the exact symptoms described in Toyota's Customer Support Program 20TE07 (and previously ZJB), which acknowledges an internal defect in the brake actuator. Safetv Risk: The sudden transition from power-assisted braking to manual hydraulic braking during a drive creates an immediate safety hazard. As the pump motor continues to cycle excessively to compensate for the internal leak, it is at risk of total thermal failure, which would lead to a near-total loss of braking assist while the vehicle is in motion. Despite the vehicle having only 75,689 miles (well under the 150,000 mile limit acknowledged in Toyota's support programs), Toyota has declined to provide assistance because the vehicle has surpassed the 10-year age mark. Toyota is wrong in not providing support for vehicles whose critical components such as brakes shouldn’t experience catastrophic internal failure at 75,689 miles, regardless of the vehicle's age.

• Jul 22, 2026AZ
  Service brakes
  In 2024, I had my vehicle checked out prior to a road trip because the brakes were making "fart noises," and I was worried about driving it to Albuquerque. The AAA certified dealer I took the car to said everything checked out alright. I never received the letter regarding the brake system issue…

  In 2024, I had my vehicle checked out prior to a road trip because the brakes were making "fart noises," and I was worried about driving it to Albuquerque. The AAA certified dealer I took the car to said everything checked out alright. I never received the letter regarding the brake system issue, so I could not take advantage of the extended warranty repair program. My car was in the 80-90 thousand mile range and had not yet rolled over. Fast forward to 2025, my dashboard lit up all over the place, and I got the brakes checked again. By that time, the fault code was coming up, but the entire ABS system needed to be replaced. I was unable to get any help from TOYOTA despite this being a KNOWN FAULT WITH TOYOTA PRIUS AND TOYOTA PRIUS V FROM THIS TIME PERIOD. They are STILL not doing anything to help their customers. Brake issues are EXTREMELY dangerous, and it is wildly negligent to continue moving forward WITHOUT fully recalling the ABS system in the FULL LINE of prius vehicles from the impacted manufacture dates. Every prius owner I know has had to deal with this. My care was UNDER the required mileage but PAST the dates to be repaired. PLEASE consider holding TOYOTA responsible and getting them to refund Prius owners who have already paid for this COSTLY repair out of pocket. Thank you.

• Jul 21, 2026PA
  Service brakes · Structure › Body · Suspension

  N/a

• Jun 30, 2026TX
  Engine
  I purchased a 2014 Toyota Prius V in 2013, and it currently has 120,000 miles on it. Last month, the engine light came on, so I took it to a dealership. They diagnosed the issue and provided the codes P0302 and P0304. After consulting multiple shops, all confirmed that coolant is leaking into the…

  I purchased a 2014 Toyota Prius V in 2013, and it currently has 120,000 miles on it. Last month, the engine light came on, so I took it to a dealership. They diagnosed the issue and provided the codes P0302 and P0304. After consulting multiple shops, all confirmed that coolant is leaking into the engine, which means I either need to repair the head gasket or replace the engine entirely. The quotes I've received for this repair range from $5,000 to $15,000, while the current value of the car is only about $5,000. I want to file a complaint regarding Toyota's responsibility for these engine issues. We buy cars because we trust the brand, and in this case, Toyota has broken that trust. Despite maintaining the car according to Toyota's recommended schedule, I have encountered this serious problem.

• May 13, 2026AL
  Service brakes
  Description of the Problem Vehicle: 2014 Toyota Prius v (Mileage: 70,000) Problem Description: The vehicle is experiencing a critical failure of the Electronically Controlled Braking (ECB) system, specifically the Brake Actuator and Booster Pump assembly. The dashboard currently displays multiple…

  Description of the Problem Vehicle: 2014 Toyota Prius v (Mileage: 70,000) Problem Description: The vehicle is experiencing a critical failure of the Electronically Controlled Braking (ECB) system, specifically the Brake Actuator and Booster Pump assembly. The dashboard currently displays multiple warning indicators: ABS light, Traction Control light, and the Brake System Warning light (Master Warning "!"). Symptoms: Mechanical Failure: The internal high-pressure accumulator is failing to hold pressure. The electric brake booster pump is heard cycling (straining) every 10–20 seconds even when the vehicle is stationary and the brake pedal is not depressed. Loss of Braking Safety Features: The system has disabled regenerative braking and Anti-lock Braking (ABS), causing significantly increased stopping distances and a "wooden," unresponsive brake pedal feel. Predictability of Failure: This failure matches the exact symptoms described in Toyota’s Customer Support Program 20TE07 (and previously ZJB), which acknowledges an internal defect in the brake actuator. Safety Risk: The sudden transition from power-assisted braking to manual hydraulic braking during a drive creates an immediate safety hazard. As the pump motor continues to cycle excessively to compensate for the internal leak, it is at risk of total thermal failure, which would lead to a near-total loss of braking assist while the vehicle is in motion. Additional Notes: Despite the vehicle having only 70,000 miles (well under the 150,000-mile limit acknowledged in Toyota’s support programs), Toyota has declined to provide assistance because the vehicle has surpassed the 10-year age mark. I am filing this report because a primary safety component (brakes) should not experience catastrophic internal failure at 70,000 miles, regardless of the vehicle's age.

• May 7, 2026CO
  Service brakes

  I have 2014 Prius v 5 with 100,000 miles but I had issues with brake booster pump

• Apr 23, 2026CA
  Electrical system · Fuel/propulsion system · Vehicle speed control
  8/2025 Car stalled on freeway. Went to dealer. They said nothing wrong. Then on a trip north, car stalled again on freeway. Went to the nearest dealer. They too said nothing wrong. This time same thing. There is a recall for the exact symptoms of the exact car yet they say the repair was done. Why…

  8/2025 Car stalled on freeway. Went to dealer. They said nothing wrong. Then on a trip north, car stalled again on freeway. Went to the nearest dealer. They too said nothing wrong. This time same thing. There is a recall for the exact symptoms of the exact car yet they say the repair was done. Why does my vin not qualify for the exact symptoms that generated a recall? This was super dangerous at freeway speed. Toyota knows there is a problem with the inverter and it's computer. Now I'm paying again for a diagnosis. That makes $750 just diagnosing and now if they actually decide it is the inverter, I have to pay upwards of $3000 even though there is a recall? What the heck?

• Apr 2, 2026CA
  Service brakes

  The brake booster has failed and seems to be a common issue with this model vehicle for Toyota issued an extended warranty, but I am passed the date and they are unwilling to do anything. Due to the malfunctioning brake booster. The car is unsafe to drive the too expensive to repair.

• Feb 13, 2026CA
  Electrical system · Fuel/propulsion system · Service brakes

  Brake booster is not working

• Nov 5, 2025MD220,000 mi
  Electrical system · Service brakes, hydraulic
  The contact owns a 2014 Toyota Prius V. The contact stated that while driving approximately 35 MPH, the brake light, tire pressure, traction control, battery, and other warning lights were illuminated. While attempting to depress the brake pedal, there was more resistance than normal, making it…

  The contact owns a 2014 Toyota Prius V. The contact stated that while driving approximately 35 MPH, the brake light, tire pressure, traction control, battery, and other warning lights were illuminated. While attempting to depress the brake pedal, there was more resistance than normal, making it difficult to slow the vehicle. The contact was able to drive the vehicle to the nearest mechanic; however, the vehicle was not diagnosed. The vehicle was then taken to the residence. The vehicle was taken to another certified mechanic, who diagnosed and determined that the brake master cylinder and actuator assemblies had failed. The brake master cylinder and brake actuator assemblies were in the process of being repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 220,000.

• Sep 25, 2025TN
  Service brakes
  Upon inspection, our mechanic determined that the master cylinder assembly and the actuator assembly require replacement (error code C1391). It is currently available for inspection, but will need to be repaired soon. Our safety and the safety of others is at great risk, because there is impending…

  Upon inspection, our mechanic determined that the master cylinder assembly and the actuator assembly require replacement (error code C1391). It is currently available for inspection, but will need to be repaired soon. Our safety and the safety of others is at great risk, because there is impending brake failure if driven and the end result could be catastrophic. On 09/13/25, the BRAKE, TRACTION CONTROL, ABS and ((!)) lights came on about 10 minutes from home. We drove home, parked the car and did not drive it again until we took it to our mechanic on 09/15/25. During this incident, the brakes failed to respond properly, which could have led to a serious accident. We took the car to a local mechanic and repairs are currently pending. The estimated cost for the necessary parts is approx. $3,000 and the labor costs are estimated to be between $1,100 and $2,000. Our local Toyota dealership was also contacted and they confirmed the presence of code C1391. Please reference Toyota Service Bulletin POL18-03, which addresses issues related to the braking system in certain Toyota models, including the Prius V. This bulletin indicates that various brake system-related warning lamps may illuminate due to internal malfunctions within the brake system, and it outlines affected parts that may require replacement. Additionally, please reference Toyota Customer Support Program 20TE07, which provides extended coverage for certain brake system repairs. It is concerning that, despite this well-known, very serious problem, Toyota has not issued a recall. While our vehicle currently has 116,975 miles, we are aware that the warranty period ended 10 years from the first date of use or 150,000 miles. However, this malfunction not only endangers our safety, but also that of other drivers on the road. We urge the NHTSA to investigate this matter thoroughly and consider the implications for a potential recall for this model, because Toyota is well-aware of this issue.

• Sep 4, 2025FL
  Service brakes
  I have a 2014 Prius V with 92,000 miles. My anti-skid, brake and ABS idiot lights went off approximately 1 week ago. (August 25, 2025) Scheduled an appointment at my Toyota dealer (September 3, 2025) and was told there was an abnormal leak in the accumulator and that the brake booster pump and…

  I have a 2014 Prius V with 92,000 miles. My anti-skid, brake and ABS idiot lights went off approximately 1 week ago. (August 25, 2025) Scheduled an appointment at my Toyota dealer (September 3, 2025) and was told there was an abnormal leak in the accumulator and that the brake booster pump and brake pump assembly needed to be replaced. Cost $5715. Not related to the brakes, but they also said I had to replace the rear shock absorbers as they are leaking and needed to be replaced and then realigned. Cost $1363. This should have been a recall not a mileage or 10 year limit.

• Aug 26, 2025GA
  Service brakes

  C1391 - Abnormal Leak of ACC Pressurization. Bad Brake booster assembly.

• Aug 8, 2025LA
  Service brakes
  Toyota has a break issue that they extended the warranty for 10 years or 150000 miles and now a few months pass the 10 years I have a problem with the actuator giving warnings and my daughter went into a skid when applying the breaks. She was lucky and didn’t hit anyone. If Toyota knows there is a…

  Toyota has a break issue that they extended the warranty for 10 years or 150000 miles and now a few months pass the 10 years I have a problem with the actuator giving warnings and my daughter went into a skid when applying the breaks. She was lucky and didn’t hit anyone. If Toyota knows there is a problem that is a safety concern they should fix it I did get a Toyota dealership to give an estimate to fix it and was told $4300.00 I think that’s too much for a defective part. It should be a safety recall.

• Jul 24, 2025CA
  Service brakes
  ABS Brake pump actuator booster failed. It is available for inspection. While driving, I started hearing a hissing sound from my brakes. I tried to slow down and my several diagnostic lights (ABS, traction control, brake, check engine, etc.) flashed on while my brakes failed to work properly. I…

  ABS Brake pump actuator booster failed. It is available for inspection. While driving, I started hearing a hissing sound from my brakes. I tried to slow down and my several diagnostic lights (ABS, traction control, brake, check engine, etc.) flashed on while my brakes failed to work properly. I turned on my hazard lights immediately. I was in the middle of the road with my toddler in the car and I almost rammed into the car in front of me. Luckily I was able to pull into a turn lane and pushed with all my might on the brakes and it finally was able to stop. My brakes failed and I could have hit the cars in front of me and hurt my child, myself and others. It was terrifying. Problem has been confirmed by an independent service center. The warning lamps only appeared WHILE the issue was happening and my brakes failed to work properly.

• Jul 16, 2025CA
  Fuel/propulsion system
  The car stalls randomly and does not enter fail-safe mode. The dealer says it is the transmission but the transmission has never shuddered or hesitated. I am reading that these vehicles have intelligent power modules in the hybrid inverter that fail and can cause stalling. I feel like the…

  The car stalls randomly and does not enter fail-safe mode. The dealer says it is the transmission but the transmission has never shuddered or hesitated. I am reading that these vehicles have intelligent power modules in the hybrid inverter that fail and can cause stalling. I feel like the dealership is working with Toyota to avoid addressing the actual problem. In the meantime I was sent home in a vehicle that continues to stall randomly and does not enter fail-safe mode.

• Jun 24, 2025TN
  Service brakes
  While braking on the interstate, this car threw error code C1391: Abnormal Leak of ACC PRESS. This is the brake system accumulator pressure - meaning lost all assistance to braking - it took a long time to slow down and come to a stop. Easily could have caused a serious crash had I been on a hill…

  While braking on the interstate, this car threw error code C1391: Abnormal Leak of ACC PRESS. This is the brake system accumulator pressure - meaning lost all assistance to braking - it took a long time to slow down and come to a stop. Easily could have caused a serious crash had I been on a hill or coming up on stopped traffic. I did some research and found this is a KNOWN ISSUE with Toyota and SHOULD HAVE BEEN A RECALL! Toyota skirted the issue by offering customers that encountered the problem a CUSTOMER SERVICE PROGRAM where they would pay for a new brake pump and master cylinder. HOWEVER, Toyota put TIME and MILEAGE CONSTRAINTS ON THE PROGRAM, and it just so happened our car had exceeded those limits - so we had to pay full price for the repair of the 2 new brake parts - over $3,000! The 2014 Toyota PriusV that we bought new and had always serviced it properly was hardly worth that, but it was our only car, so we paid it. BUT will never buy another Toyota now - and NHTSA needs to fine Toyota for this poor brake system

• Jun 10, 2025MO
  Service brakes
  Upon exiting the highway my brake system when engaged was completely unresponsive. I of course pushed down gently as would and upon realizing the brakes were not responding I started pounding on the brake pad. I had to ram the brake down for the vehicle to even slow. Thankfully no-one was in front…

  Upon exiting the highway my brake system when engaged was completely unresponsive. I of course pushed down gently as would and upon realizing the brakes were not responding I started pounding on the brake pad. I had to ram the brake down for the vehicle to even slow. Thankfully no-one was in front of me at the light and I was able to pull into the nearest gas station having to ram brake to fullest extent to get the vehicle to stop moving. All lights within the braking system lit up including the Master Warning Light, Brake System Warning Light, ABS Warning light, and SLIP indicator as well as the warning siren. These warning lights did not come on til after* the brake system was engaged with failure*** NOT PRIOR. It was not indicative of an issue prior too, no former brake issue or warning lights. I turned the vehicle off and then back on again to see if the same lights still lit and issue was still malfunctioning. I called for a tow and had vehicle taken to the Adams Toyota Dealership (MO)The following diagnostic code C1391 was registered on my vehicle at dealership. Upon research (not disclosure) I found that the above code- C1391- "Brake booster and Brake Booster Pump Assembly" is a known issue that Toyota offered a Warranty repair from May 21-Nov 22' IF FAILURE Not a recall but a "if" brake system fails. Please see Customer Support Program 21TE01. I purchased vehicle in OCT 21 and was never informed, never provided this warranty letter, issue didn't show up on Carfax etc and I purchased directly from the Toyota Dealership. Upon research you will find that Toyota is currently in class action and individual lawsuits re this specific part failure with the above diagnostic code. They are denying replacement due the expired warranty time. The Parts should recalled* not just a "warranty issue" -unacceptable to leave buyers uninformed to such a major issue that can cause accident/death (IM PREGNANT I MAY ADD!) and unable to seek covered repairs unless it fails!

• Jun 7, 2025CA
  Electrical system · Fuel/propulsion system

  The vehicle stalled while driving 35 to 45 mph. Engine had no power but the brakes and power steering worked.

• May 22, 2025CA
  Unknown or other
  While driving my 2014 Prius V it stalled. I turned it off and restarted it. The yellow car symbol with an exclamation point lit up. I turned the car on and off again. The light went away and I was able to drive home. I was unable to get any OBD 2 codes on my personal reader. I changed the 12 V…

  While driving my 2014 Prius V it stalled. I turned it off and restarted it. The yellow car symbol with an exclamation point lit up. I turned the car on and off again. The light went away and I was able to drive home. I was unable to get any OBD 2 codes on my personal reader. I changed the 12 V battery and thought this had fixed the stalling. Then it stalled again and repeated the same process. Though we were able to drove the car I had it towed to a dealership for safety reasons. The dealership pulled codes, cleared them, drove the car 20 miles, and were unable to reproduce the codes. I was told to return when the codes returned. It stalled again and now I am afraid to drive this car.

• Mar 24, 2025GA100,000 mi
  Service brakes, hydraulic
  The contact owns a 2014 Toyota Prius V. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed and traveled to the floorboard. The contact engaged the parking brake to stop the vehicle. The vehicle was able to be restarted. The dealer was not contacted. The…

  The contact owns a 2014 Toyota Prius V. The contact stated that while driving at an undisclosed speed, the brake pedal was depressed and traveled to the floorboard. The contact engaged the parking brake to stop the vehicle. The vehicle was able to be restarted. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 100,000.

• Mar 22, 2025CA
  Electrical system · Service brakes

  Break pump , break pump assembly, Break actuator. Vehicle has only 91k miles it. Breaks feel rough and slower to react. Too worried to use vehicle. Dealership said it’s a very well known issue and wanted $5800 to fix it.

• Mar 10, 2025AL133,838 mi
  Service brakes, hydraulic
  The contact owns a 2014 Toyota Prius V. The contact stated that while driving at approximately 35 MPH, the brakes and ABS warning lights illuminated the instrument cluster. The contact had taken the vehicle to a local dealer, where it was diagnosed and determined that the brake booster and brake…

  The contact owns a 2014 Toyota Prius V. The contact stated that while driving at approximately 35 MPH, the brakes and ABS warning lights illuminated the instrument cluster. The contact had taken the vehicle to a local dealer, where it was diagnosed and determined that the brake booster and brake booster pump assemblies needed to be replaced. The contact was informed about the Customer Satisfaction Program: 20TE07 (Service Brakes, Hydraulic); however, the vehicle was no longer covered under the warranty extension. The vehicle was not repaired. The manufacturer was informed of the failure. The failure mileage was 133,838.

• Feb 7, 2025AZ
  Service brakes
  Toyota did implement an extended service warranty that ran through June of 2024 for a KNOWN issue with the ABS system. The problem was identified in a number of vehicle models, multiple recalls were made starting in 2019, and the Prius V (mine is a 2015) was excluded from that recall. After a road…

  Toyota did implement an extended service warranty that ran through June of 2024 for a KNOWN issue with the ABS system. The problem was identified in a number of vehicle models, multiple recalls were made starting in 2019, and the Prius V (mine is a 2015) was excluded from that recall. After a road trip from Phoenix, AZ to Albequerque, NM, I started noticing a "farting" noise while braking. The extended service program had closed the month prior. I had the car inspected at my local AAA service department prior to leaving. The problem got worse, the braking is squishy and inconsistent, so I took it back to the shop. They've told me that my ABS system is not functioning and needs to be replaced. I called a dealership about the issue, and they said they can't honor the warranty unless Toyota does. They gave me the contact number for Toyota's Customer Care line, and I requested an appeal or exception which was denied. I have 85,000 miles on the car. It hasn't even rolled over yet. I don't drive very much and didn't drive really at all for almost 3 years between 2020 and 2023 since I was working online. There is nothing I could possibly have done to contribute to this issue, so it is CLEARLY a manufacturer error. Any issue with brakes poses a serious threat to safety and must be taken seriously. The repair cost is over $5,000, and MOST households cannot absorb that cost. If more vehicles are having similar issues, then I GUARANTEE you that there are more cars on the road right now with unstable brake systems that may fail at crucial moments. I have an appointment on Monday 2/10/24 with a the dealership service center. I have no idea if I'll be able to cover the cost of the repairs.

• Jan 29, 2025TX
  Service brakes
  Approximately 2 months ago my brake booster and accumulator pump failed looked up recalls on this issue my vehicle falls in the recalled model year was wondering if it is just overlooked because it has not had any problems with it in the past only 76000 miles on vehicle due to low mileage I…

  Approximately 2 months ago my brake booster and accumulator pump failed looked up recalls on this issue my vehicle falls in the recalled model year was wondering if it is just overlooked because it has not had any problems with it in the past only 76000 miles on vehicle due to low mileage I believe it should not have failed it has a internal leak had vehicle scanned code C1391 was detected for abnormal leak of ACC press. Thank you For any assistance you can provide for me unable to afford repairs at this need vehicle for transportation to and from work again. Thank you

Service bulletins

Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.

• 11007455Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11007445The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11007444To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11007443Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11006161Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines. This Service Bulletin is to provide a general overview and direction for the odor remediation process.
• 11006151The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11006150To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible.
• 11006149Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. It is the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11005153Toyota vehicles are currently protected with RapgardTM protective film designed to protect the horizontal painted surfaces. This material protects from acid rain, environmental fallout, and rail contamination.
• 11005149Vehicles may occasionally be subjected to contamination by airborne iron particles shed from railroad tracks, train wheels, exposure to heavy machinery facilities, grinding, welding, etc. This type of contamination can be identified by the presence of small, red or brown particles on the paint surface. These particles are often difficult to see on dark color paints but can be easily felt when brushing a hand across horizontal body surfaces such as the hood, roof, or deck lid.
• 11005122Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11005064Some 2005 2024 Toyota vehicles that have undergone water intrusion may exhibit a condition in which a musty odor is present. Follow the procedures in this bulletin to remediate the odor and address this condition. The purpose of this Service Bulletin is to provide general guidelines and procedures for odor remediation. This Service Bulletin provides a guide on how to prepare and treat the interior of the vehicle for odor remediation. Refer to the applicable model and model year Repair Manual and the EPA (Environmental Protection Agency) website for the most up-to-date safety and precautionary guidelines.
• 11003649The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003647To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003644Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 11003594The condition known as acid rain is caused by airborne chemicals or particles in the atmosphere, which mix with rainwater, nighttime dew, or high humidity to form acidic compounds. If these contaminants settle and remain on a painted vehicle surface, especially the horizonal areas of the hood, roof, and decklid, significant damage can occur. This damage is the result of actual etching of the paint and appears as pitting or water spots. As acid rain droplets on the vehicle surface evaporate, the concentration strength of the acid increases, causing deeper and more rapid damage. This evaporation and corrosive action also occur more rapidly on dark colored cars as direct sun heat increases. While Toyota paint quality, durability, and resistance to environmental factors is continuously being improved, it remains the responsibility of the dealer to protect and maintain the vehicles paint finish from the time of arrival at the dealership until retail delivery to the customer. In areas known for high frequency and/or concentration of acid rain (see Figure 1), frequent vehicle washing during high heat or humidity periods will minimize the potential for paint damage caused by acid rain. It is further recommended that either reverse osmosis or deionized water be used to prevent water spotting.
• 11003592To prevent brake rotor rust from forming during transportation and storage, wheel film will be used instead of a cardboard type of anti-rust cover. The purpose of the wheel film is to shield the disc brake rotor from weather elements and initial rust before the vehicle is delivered to the customer. Consequently, the film should remain on the wheel for as long as possible. SUPERSESSION NOTICE The information contained in this bulletin supersedes Service Bulletin No. PD017-04. The entire bulletin has been updated.
• 11003589Acid rain results from rainwater or other airborne moisture that become acidic due to industrial chemical impurities in the atmosphere. If these acidic compounds settle on an exposed vehicle, especially the horizontal areas such as the hood, roof, and decklid, significant damage to the painted surfaces can occur. Acid rain damage can typically be identified on vehicles by the presence of stains on the paint surface that resemble hard water spots. Unlike water spots however, acid rain damage cannot be removed by regular washing procedures. Also, because acid rain can etch and soften the paint, normal buffing or polishing repair procedures should not be attempted. This can cause further damage and result in visible depressions in the paint surface. The following are the three major categories of acid rain damage: Minor damage: requires only buffing to repair. Moderate damage: usually requires neutralizing, color sanding, and buffing. Severe damage: extending beyond 1/2 mil of clearcoat on a pearl, metallic, or solid color, requires neutralization, sanding, and repainting. In cases where acid rain damage is minor, neutralization and buffing with a liquid-type paint finessing product may provide an adequate repair. Only specially formulated products outlined in this bulletin should be used for that purpose. Unfortunately, other than minor damage, there is no simple method of determining the actual extent (depth) of acid penetration other than color sanding a representative affected area until there is no visible etching or depressions, followed by measuring the amount of paint removed with either a magnetic or digital-type film thickness gauge. The procedures in this bulletin are intended for use by qualified body/paint technicians and should not be attempted by inexperienced personnel. While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to the first sale. To read, While the quality and durability of paint on Toyota vehicles is continuously being improved, it remains the dealers responsibility to protect and maintain the quality of the vehicles paint finish after receipt at the dealership prior to first sale. Perform frequent vehicle washing, as often as daily, during high heat and humidity periods to minimize the potential for paint damage due to acid rain exposure. This is especially important in geographical areas known for high frequency and concentration of acid rain and industrial fallout.
• 10253223This is to advise of various price adjustments that will affect Toyota Genuine Motor Oil and Long Life Coolant, effective March 1, 2024. These products are ordered through the Toyota Complete Maintenance Care (TCMC) website.
• 10251070OBSOLETE NOTICE January 22, 2024: This bulletin is now obsolete. Please see T-SB-0057-18.
• 10245488Ti: technical instructions for limited service campaign K0P customer support program 19te12 safety connect system ? Vehicle location inaccurate certain 2013 ? 2019 model year 4runner 2011 ? 2017 model year land cruiser 2013 ? 2017 model year prius 2012 ? 2017 model year prius v 2016 ? 2017 model year mirai updated 010/25/2023
• 10245487DP: The Data Communication Module (DCM) in the subject vehicles are equipped with software to identify the location of the vehicle using the Global Positioning System (GPS) to support features of the Safety Connect system. Due to incorrect programming in the DCM software, after November 2nd, 2019, the GPS coordinates for this system will be calculated incorrectly. This will cause the system to use incorrect vehicle coordinates if one of the system?s features is activated.
• 10244115TSB: The air conditioning dye injection tool kit has been developed to aid in identifying the location of air conditioning refrigerant leaks. Follow the procedures outlined in this service bulletin to aid in locating, inspecting, and repairing refrigerant leaks
• 10244113TSB: Replacement certification labels (the vinyl label installed on the driver door or door post) and VIN plates (the metal plate riveted to dashboard) (see Figure 1) for most 1979 ? 2023 model year vehicles may be available provided the requests meet the criteria listed in this Service Bulletin. Follow the Procurement Procedure in this bulletin to request a replacement certification label or VIN plate.
• 10240056DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.
• 10240055DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.
• 10238157TSB: The Immobilizer and Smart Key Reset is a feature that allows the registration of new keys when all master keys are lost. Once the system is reset, all previously registered keys will be erased. Follow the procedures in this bulletin to reset a vehicle Immobilizer or Smart Key system.
• 10235236DP: Customer Support Program 20TE10 has been superseded by 23TE03
• 10235232DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the Intelligent Power Module (IPM). The specific condition covered by this Customer Confidence Program 23TE03 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A94, P0A1A, P324E, and/or P3004. If any of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode.
• 10235231DP: The Customer Confidence Program is a component of a class action settlement that includes several elements of coverage. The Customer Confidence Program provides coverage as it applies to the intelligent power module (IPM). The specific condition covered by this Customer Confidence Program 23TE02 is failure of the IPM located inside the inverter assembly of the hybrid system indicated by DTCs P0A7A and/or P0A78. If either of these DTCs are detected, various warning lamps on the instrument panel will also illuminate and the vehicle will enter Fail Safe Mode. Toyota will also provide coverage if the IPM has failed due to a thermal event regardless of what DTC is detected, or if the IPM has failed and the failure cannot be demonstrated to be due to anything other than a thermal event.
• 10235230TSB: Some 2010 ? 2015 model year Prius and 2012 ? 2017 model year Prius V vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A94, P324E, P0A1A, and/or P3004, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.
• 10235229TSB: Some 2010 ? 2015 model year Prius and 2012 ? 2017 model year Prius V vehicles may exhibit a MIL ON condition with Diagnostic Trouble Codes (DTCs) P0A7A and/or P0A78, indicating a malfunction has occurred in the inverter assembly with converter. Follow the Repair Procedure in this bulletin to identify the specific components within the inverter assembly with converter that need to be replaced and address this condition.
• 10230369DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230368DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10230367DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement
• 10230356TI: 19TE12 Expired on December 1, 2022
• 10230355DP: Customer Support Program 19TE12 expired December 1, 2022.
• 10227920DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227919DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement.
• 10227918DL: Toyota has received reports of paint peeling on certain vehicles with the original factory-applied Blizzard Pearl or Super White paint colors. These reports indicate that vehicles with these specific paint colors, applied during the vehicle manufacturing process, may experience paint peeling on exterior metal body panels. Although the original factory paint is covered by Toyota?s New Vehicle Limited Warranty for 3 years or 36,000 miles (whichever comes first), we at Toyota care about the customers? ownership experience. Toyota is providing coverage for repairs related to the condition described above. The following information is provided to inform you and your staff of the program notification schedule and your degree of involvement

Every Toyota Prius V model year

Bars are owner complaints, dots mark years with recalls. Select a year to open its report.