2021 Van Hool CX35
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Van Hool › CX35 › 2021
These records cover every 2021 Van Hool CX35. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
2 recalls name the 2021 Van Hool CX35. Newest first.
ABC BUS Inc is recalling certain 1999-2013 Van Hool C2045, 2004-2013 Van Hool T2145, 2013-2022 Van Hool TX45, 2013-2023 Van Hool CX45, and 2016-2022 Van Hool CX35 vehicles. The front entrance door may have the incorrect glaze on the lower curb view window. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard…
Risk and remedy
Risk
The incorrect glaze may reduce the driver's visibility, increasing the risk of a crash.
Remedy
Dealers will inspect and install a nontransparent vinyl cover over the window as necessary, free of charge. Owner notification letters were mailed April 20, 2026. Owners may contact ABC Bus customer service at 1-877-427-7278. Vehicle Identification Numbers (VINs) involved in this recall will be searchable on NHTSA.gov beginning April 30, 2026.
Van Hool N.V. (Van Hool) is recalling certain 2018-2021 CX35, TDX25, 2018-2019 CX45, TX45, 2021 AG300, and 2018 TD925 vehicles. The sealing washer may not seat correctly in the pilot bore holes, allowing the high pressure fuel rail assembly to leak.
Risk and remedy
Risk
A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy
Dealers will inspect the rail threads, and replace the rail as necessary, free of charge. Owner notification letters were mailed on July 30, 2021. Owners may contact Van Hool customer service at 1-877-427-7278 or 1-407-656-7977. Van Hool's number for this recall is P1489.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010424This service bulletin provides you with information about the location of emergency side window decals so that the vehicle meets the National Highway Traffic Safety Administrations (NHTSA) Federal Motor Vehicle Safety Standards (FMVSS) in the U.S and the Canadian Motor Vehicle Safety Standards (CMVSS) in Canada about this subject.
- 10250324an Hool feels very strongly about quality and constantly focuses on product improvement. This is why we would like to ask you to provide us with the correct information as quickly as possible when filing a warranty request. A fully documented diagnostic is key in this process. The more precise and complete the supplied information is, the quicker we can finalize your request, with financial compensation when applicable. For this reason, follow the procedure below as closely as possible
- 10249724SERVICE INFORMATION: Compressed-air brake system functional check - The tests laid out in this bulletin are designed to identify the cause(s) of a sluggish performance and/or leaks in the system. The tests give you a general idea of the system condition. The procedures described in this service bulletin are applicable to Van Hool, CX35 vehicles with a MVP instrument cluster.
- 10248730This service bulletin provides you with information about the location of emergency side window decals so that the vehicle meets the National Highway Traffic Safety Administrations (NHTSA) Federal Motor Vehicle Safety Standards (FMVSS) in the U.S and the Canadian Motor Vehicle Safety Standards (CMVSS) in Canada about this subject.
- 10242220SUBJECT : Engine overheating due to an open or not properly closed access door with electric cooling fans CONDITIONS : This service bulletin does not entitle to any reimbursement. Your vehicle is equipped with electric cooling fans located at the inside of the access doors of the radiator and charge-air cooler compartment. To prevent personal injury due to running fans, a safety system with proximity switches prevents the cooling fans from running when the access door is open or not properly closed. The cooling system will in that case not operate causing possible overheating of the engine when this situation continues for a longer time. To prevent this from happening, it is important to follow the guideline below:
- 10237604Van Hool has introduced in production a lower value resistor in the defroster fan speed control circuit to improve windshield demisting. Customers who want to install this resistor can follow the step-by-step instructions mentioned in this service bulletin.
- 10233467Service Information: In its production process, Bock, manufacturer of refrigerant compressors, has switched to a new type of motor protection switch for the electric motor of the refrigerant compressor. As the MP10 motor protection switch (VH11472802) is no longer made available as a spare part, as of now you will receive the new INT69G motor protection switch (VH11691810) when ordering. The MP10 and the INT69G are interchangeable, but fastening and electric connection are different.
- 10219652Product Improvement: ALL VEHICLES WITH LIGHT-ALLOY WHEELS - Introduction of wheel-end monitoring system (WEM). Van Hool has released a wheel-end monitoring system (WEM) which can be installed on all vehicles equipped with light-alloy wheels. The WEM is installed at the outboard side of the wheel and monitors vibrations produced by the wheel bearing. It warns in case of bearing raceway spalling by flashing a red LED on the unit. The WEM is delivered with a magnet which is used to change from "transport" to "standstill" mode.
- 10210015Service Information: Removal and installation of Shaw DEF tank sensor unit The purpose of this service information bulletin is to inform you about the removal and installation of a Shaw DEF tank sensor unit.
- 10209998Product Improvement: Introduction of new generation DEF tank sensor unit Some previous manufactured DEF tank sensor units are no longer available as spare part. This service bulletin gives you information about the visual points of difference between the generations and which one to order in case of replacement. Most of the replacements are direct fit, except for the sensor units with an asterisk in the table which must be secured with a split mounting ring consisting of two halves instead of the original closed mounting ring.
- 10209994Service Information - Introduction of new 4/2 solenoid valve in compressed-air circuit Van Hool has switched over into production to a new type of 4/2 solenoid valve in the compressed-air system. As the previous Knorr-Bremse (Bosch) solenoid valve (VH11102170) is no longer made available as spare part, customers will receive a Wabco solenoid valve (VH660526759) when ordering. Both valves are interchangeable, but some differences must be considered. Consult the information in this service bulletin for a proper installation.
- 10209992Service Information - Maintenance operations related to refrigerant compressor oil This service information bulletin is a reminder/update about refrigerant compressor oil maintenance. To ensure a reliable system, it is important to perform the maintenance on a regular base as mentioned further on.
- 10206913To change condenser fan relay 660752034 by relay 660762200.
- 10201570SERVICE INFORMATION BULLETIN: Van Hool has switched over into production to a new type of 4/2 solenoid valve in the compressed-air system. As the previous Knorr-Bremse (Bosch) solenoid valve (VH11102170) is no longer made available as spare part, you will receive a Wabco solenoid valve (VH660526759) when ordering. Both valves are interchangeable, but some differences must be considered. Consult the information in this service bulletin for a proper installation.
Every Van Hool CX35 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.