2018 Chrysler Pacifica
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Chrysler › Pacifica › 2018
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2018 Chrysler Pacifica. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
12 recalls name the 2018 Chrysler Pacifica. Newest first.
Rollx Vans (Rollx) is recalling certain GMC Yukon, Sierra, Chevrolet Express 2500, Ford Transit, E-250, Toyota Sienna, Sienna Hybrid, Honda Odyssey, Chrysler Town and Country, Voyager, Pacifica, Dodge Grand Caravan, and Ram Promaster vehicles equipped with QRT-Deluxe and QRT-Max wheelchair restraints. Please refer to Rollx's recall report for specific model…
An unsecured wheelchair can move during transit, increasing the risk of injury.
Rollx will work with Q'Straint to inspect and replace the retractors as necessary, free of charge. Owner notification letters were mailed February 5, 2026. Owners may contact Rollx's customer service at 1-800-956-6668.
Chrysler (FCA US, LLC) is recalling certain 2017-2023 Pacifica Plug-In Hybrid Electric vehicles (PHEVs). An internal transmission wiring connector may short circuit, resulting in an unexpected engine shutdown.
An unexpected engine shutdown can cause a loss of drive power, increasing the risk of a crash.
Dealers will update the Power Inverter Module (PIM) software and, if necessary, update the instrument panel cluster (IPC) and the electronic control module (ECM) software, free of charge. FCA US will notify dealers and begin notifying owners on or about: 03/21/2023 for 2021 model year vehicles, 05/02/2023 for 2019-2020 model year vehicles, and 06/15/2023 for 2017-2018 model year vehicles. FCA began notifying owners on February 23, 2023. Owners may contact FCA US, LLC customer service at 1-800-853-1403. FCA US, LLC's number for this recall is 03A.
Chrysler (FCA US LLC) is recalling certain 2018-2019 Pacifica vehicles equipped with an 8.4 inch radio display, 360 degree surround view camera system, and seat back video screens. A software error can cause the rearview camera image to remain displayed on the radio after the vehicle has been shifted out of reverse. As such, these vehicles fail to comply…
The lingering rearview image can distract the driver, increasing the risk of a crash.
Chrysler will notify owners, and dealers will update the radio software, free of charge. The recall began January 9, 2020. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is VE2.
Chrysler (FCA US LLC) is recalling certain 2017-2019 Pacifica vehicles equipped with engine stop/start systems. A loose battery ground connection may result in an intermittent loss of power steering assist and/or a stall.
A loss of power steering assist or a stall can increase the risk of crash.
Chrysler will notify owners, and dealers will inspect the battery ground surfaces, clean the contact surfaces as needed, and properly reassemble the ground connection, free of charge. The recall began May 24, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. FCA US' number for this recall is V53.
Chrysler (FCA US LLC) is recalling certain 2018 Chrysler Pacifica and Pacifica hybrid vehicles. The right front lower control arm may separate from the steering knuckle.
A control arm separation could increase the risk of a crash.
Chrysler will notify owners, and dealers will inspect the right front knuckle and lower control arm for damage, replacing the components as necessary. The right front lower control arm knuckle pinch bolt will be replaced with a larger-diameter pinch bolt. These repairs will be performed free of charge. The recall began April 26, 2019. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is V15.
Chrysler (FCA US LLC) is recalling certain 2018 Jeep Renegade, Compass and Grand Cherokee, RAM 1500 and Promaster, Fiat 500x, Dodge Journey, Challenger, Charger and Durango and Chrysler 300x vehicles, 2017-2018 Jeep Wrangler, Dodge Grand Caravan and Chrysler Town and Country vehicles and 2018-2019 Jeep Cherokee and 2018 Chrysler Pacifica and Pacifica Hybrid…
A vehicle stall can increase the risk of a crash.
Chrysler will notify owners, and dealers will replace the powertrain control module, free of charge. The recall began October 2, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U87.
Chrysler (FCA US LLC) is recalling certain 2019 Jeep Cherokee vehicles and 2018 Chrysler Pacifica non-hybrid vehicles. A component in the transmission may not have been welded properly, possibly causing the transmission to not transmit engine power to the wheels.
If the transmission weld fails, the vehicle will stop moving, increasing the risk of a crash.
Chrysler will notify owners, and dealers will replace the transmission, free of charge. The recall is expected to begin September 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U85.
Chrysler (FCA US LLC) is recalling certain 2018 Chrysler Pacifica vehicles. The front axle halfshafts may have been incorrectly assembled, preventing the shaft from being properly secured to the constant-velocity (CV) joint.
If the axle shaft disengages from the CV joint, the vehicle will have a loss of drive or allow the vehicle to move while in the "Park" position. Either condition may increase the risk of a crash.
Chrysler will notify owners, and dealers will replace the left or right halfshaft assembly, free of charge. The recall began September 18, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U80.
Chrysler (FCA US LLC) is recalling certain 2017-2018 Chrysler Pacifica vehicles. The Manual Park Release (MPR) plug may be removed without a tool. As such, these vehicles fail to comply with the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 114, "Theft Protection."
If the MPR is engaged unintentionally, the vehicle could roll away striking and injuring a bystander or cause a crash.
Chrysler will notify owners, and dealers will replace the MPR plug, free of charge. The recall began July 9, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is U50.
Chrysler (FCA US LLC) is recalling certain 2014-2018 Dodge Journey, Charger and Durango, RAM 2500, 3500, 3500 Cab Chassis (more than 10,000lb), 4500 Cab Chassis and 5500 Cab Chassis, Jeep Cherokee and Grand Cherokee and Chrysler 300, 2014-2019 RAM 1500, 2015-2018 Dodge Challenger, 2015-2017 Chrysler 200, 2016-2018 RAM 3500 Cab Chassis (less than 10,000 lb)…
If the vehicle maintains its speed or accelerates despite attempts to deactivate the cruise control, there would be an increased risk of a crash.
Chrysler will notify owners, and dealers will inspect the software, and perform a software flash on the engine or powertrain control module, free of charge. The recall began June 4, 2018. Owners may contact Chrysler customer service at 1-800-853-1403. Note: Owners are advised to stop using cruise control until the software update has been performed. In the event that cruise control cannot be disengaged while driving, owners should firmly and steadily apply the brakes and shift the transmission to neutral, placing the vehicle in park once it has stopped.
Chrysler (FCA US LLC) is recalling various Dodge, Chrysler, and RAM vehicles equipped with Kidde Plastic-Handle or Push Button 'Pindicator' Fire Extinguishers. A list of the affected trailer models is available at: https://static.nhtsa.gov/odi/rcl/2017/RMISC-17V824-0103.pdf. These extinguishers may become clogged, preventing the extinguisher from…
If the fire extinguisher does not function properly, it can increase the risk of injury in the event of a fire.
Chrysler will notify owners instructing them to contact Kidde for a replacement fire extinguisher, free of charge. The recall began February 14, 2018. Owners may contact Chrysler customer service at 1-800-853-1403 or Kidde customer service service toll-free at 1-855-262-3540, or online at www.kidde.com and click on "Product Safety Recall" for more information. Chrysler's number for this recall is T82.
Chrysler (FCA US LLC) is recalling certain 2017-2018 Chrysler Pacifica vehicles equipped with the 8-passenger seating option. In certain passenger seating and vehicle situations, the second-row center seating position seat belt buckle could cause the left outboard seat belt to become unlatched.
Inadvertent unlatching of the left outboard seat belt can increase the risk of injury in the event of a crash.
Chrysler will notify owners, and dealers will install a shorter second-row seat belt buckle, free of charge. The recall began October 26, 2017. Owners may contact Chrysler customer service at 1-800-853-1403. Chrysler's number for this recall is T54.
The engine powertrain system failed, specifically a catastrophic failure of the cylinder head gaskets alongside a stretched engine timing chain. The replaced components were discarded by the repair facility following the completion of the service and are not available for inspection. The failure caused a sudden, severe engine malfunction accompanied by a rough idle and immediate loss of smooth powertrain operation. Sudden engine failures of this nature create a severe hazard when operating on backroads or public highways, as they can cause unexpected stalling, a complete loss of motive power, or sudden deceleration in active traffic, significantly increasing the risk of a collision. The diagnosis of the blown head gasket and stretched timing chain was formally confirmed and documented by an independent service center (Rusty's Auto Service, Repair Order #118288). The vehicle has not been inspected by the manufacturer, police, or insurance representatives. It was inspected and repaired strictly by the independent service center. The vehicle experienced a sudden, momentary rough idle and rapid coolant loss without any prior overheating indications or warning lights. These symptoms appeared immediately prior to bringing the vehicle in for a professional diagnostic inspection.
Makes a clicking popping noise when turning the wheel. The sound is highly noticeable when stationary or moving very slowly, and occurs specifically when the steering wheel is forced almost all the way to the bump stop either way. Dealership quoted over $4000 for electric rack and pinion. I had just paid $17000 for it without an extended warranty.
Experiencing steering lockup around the 2 o clock position when cornering to the right. Doesn’t lock up to the left, only to the right.steering will Lock up and won’t release unless a slight tug on the steering wheel. We experience this every time you remotely hold in the 2 o clock position for the slightest bit of time. I have kids in this car and when we’re going 65+ down interstates, this is a serious safety issue and concerns me greatly for the safety of my family. Van only has 95k miles on it. Spent a considerable about of money on this can van and we can’t even drive it and have to pay a shop a few more thousand to fix this. It wouldn’t be a big deal if I was one of a few people but reports say 287k people are experiencing this. Unacceptable.
Radio screen frozen plus loud sounds from speaker when unlocked
My van has been reliable for 5 years until recall 73B was performed. Ever since it's install I have had 7 repair attempts and 250+ days out of service. Each repair attempt is preceesed by check engine lights, service hybrid system, check electronic throttle control, red wrench, blind spot temporarily unavailable, (occasionally) service airbag, service shifter, and stability control lights. Chrysler has been unable to fix this issue. They have replaced the abs module, 12v battery, can bus's, wiring, battery coolant heater, eflite motors and reducers, 400v battery, and the under hood wiring harness. Engineering has been involved, star cases opened, and technicians flown in to address these issues. The DTC code scans reveal many communication codes, both active and permanent. The last scan had 23 active codes. No one can tell me if this van is safe to drive, I don't think it is. I have had no drive events, and lost power steering momentarily at highway speeds. The latest incident had the messages start appearing at 45 mph. This can is unfit to be on the road, and stellantis does not seem to be able to fix it
On the morning of October 18, 2026 my daughter an I were driving home from a trip. 10 minutes after we left a friend's house the hood of the van flew open and smashed the windshield. An "hood open" indicator light never came on. I had no reason to believe the hood was not secure. So the indicator light, primary latch and safty latch all failed. This could have been a lot worse if we were on the highway already. Luckily, we were on a backroad where I had room to regain control of the van and stop with no other cars around. We were able to walk away with minor injuries. I just don't want this to happen to someone else. Someone could get seriously hurt. It was probably one of the scariest things I have had happen in my life.
Blown Head Gasket. Having the unknown blown head gasket issue may have caused extreme damage to other engine components. Vehicle has less than 145,000 miles.
The contact owns a 2018 Chrysler Pacifica. The contact stated that while driving at various speeds and steering left or right, the steering wheelbecame difficult to turn. The contact associated the failure with NHTSA Investigation: PE25009 (Steering). The failure mileage was approximately 85,000.
An Electric Power Steering System (EPS) code came up on the dash and then it locked up the steering going down the road with my wife and children in the car on 10-13-2026. Bought the car from a dealer on 10-12-2026. Replaced main and auxiliary batteries on behalf of dealerships expense on 10-14-2026. 10-16-2026 the code came back up and locked the steering up again going down the highway with my wife and children in the car. The dealer is taking action as we speak, we will see what they do.
The contact owns a 2018 Chrysler Pacifica modified with an electric wheelchair conversion and ramp. The contact stated that while opening the electric power sliding door, the hinges fractured and detached completely. When the automated sliding system activated and moved rearward, it broke the hinges and forced the door off the track. Due to the mechanical failure of the sliding door, the electrical system malfunctioned, causing the wheelchair ramp to fail to deploy. Furthermore, when the hinges detached, they struck the vehicle's glass, causing it to shatter. The vehicle was taken to a dealer, where the hinges were replaced for a second time; however, the failure reoccurred. The failure mileage was 19,500.
The contact owns a 2018 Chrysler Pacifica. The contact stated that while driving at 30 MPH, the engine seized. The vehicle was able to restart. The dealer was made aware of the failure. The contact was informed that the repair was not covered under an unknown recall associated with the failure because the VIN was not included. The failure mileage was approximately 38,000.
Head gasket issue. Known issue with this model. Costly repair "The primary reason is inadequate construction techniques, design, and materials. There isn't a preventive solution for this issue. If it occurs, it will be dealt with at that time." [XXX] [XXX] [XXX] [XXX] Cell INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2018 Chrysler Pacifica. The contact stated that while driving and turning the steering wheel in either direction, the steering wheel was sticking while attempting to return the steering wheel to center. The vehicle was taken to the local dealer. The cause of the failure was not yet determined. The manufacturer was not yet notified of the failure. The contact was notified of NHTSA Action Number: PE25009 (STEERING). The contact stated that the vehicle had experienced the failure listed in the investigation. The failure mileage was 72,000.
The transmission shifts harshly, clunks when shifted into Drive or Reverse, and hesitates before suddenly lurching. Engine RPM rises before the transmission engages, and some describe the resulting jolt as feeling like being hit from behind. The steering wheel locks stiffly during gentle turns to the right, then suddenly releases causing a jolt back to the left at times, all other times it requires a hard pull of the wheel manually to get the steering to release, which also causes a hard jerking to the opposite direction. Battery and stop/start system: Repeated Auxiliary battery replacements which power the stop/start system and warning lights. On 5 occasions the Aux battery has been replaced and within a week the system fails with no diagnostic readings identifying the cause. This leads to harder drains on the main battery. The main battery (purchased from Autozone, has been replaced on warranty because it never makes it past the 2-year mark) occasional starting difficulties, and inconsistent stop/start operation. Dash Screen: The screen freezes or turns blank while operating the vehicle. Complete loss of cabin temperature control. At other times the display will freeze on the Chrysler brand logo and is completely unresponsive to any haptic touch. The software just freezes. Even after complete shutdowns and time outs the display does not reset immediately. It's a coin flip if it's going to work. These problems have been ongoing since I purchased the vehicle in 2019. Dealerships have recognized them and consistently say that until Chrysler is forced to fix this the Dealerships can't do anything about it without charging me repairs/replacement.
Over the past year or two, especially as the temperatures begin to get cooler outside, I've noticed a sensation when doing a gradual turn anywhere between 20-60 MPH, and the steering wheel is at the 11 or 1 o clock position, the vehicle "sticks". I then have to put force on the steering wheel to get it back to center and straighten out the driving path. It happens more when returning to center from left hand turns vs right hand turns. This puts me and other drivers on the road in danger because it's extremely easy to oversteer and swerve off the road or into another driver, injuring or killing passengers. The auto centering nature found previously in the van is not consistent. I mentioned this issue to my dealer when it first started, they were unable to duplicate. As the issue persists, I did my own research and see there are numerous articles online clearly stating this is a very dangerous issue-specifically with my 2018 model year (as well as with 2017 models). I see no warning lights that accompany this behavior. And that makes it all the more dangerous. Without any awareness of the issue, it's a lot more probable to experience the behavior and cause an accident.
While steering my steering wheel sticks and I have to turn it hard to get it to straighten back out. I am afraid that I am going to over compensate and go into other lane of traffic
First, I had camshaft related error which turned out to be a bad intake camshaft on bank 1. The Camshaft, all rocker arms, lifters, camshaft adjuster and all VVL actuators have been replaced with genuine mopar parts. 3 weeks latet, the head gasket on bank 2 failed, caused coolant to leak into the cylinder. The van has 89k miles, very clean and always maintained on time.
I am writing to offer corroborating evidence for NHTSA PE25009. The electric power steering system malfunctioned, and on this vehicle, that is a single unit with the rack and pinion, electric assist motor, and controller. At any point in time, the driver can turn the steering wheel and the vehicle will fight them. If attempting to turn left, it’ll maybe get as far as 11:00 and refuse to turn more. For a right turn, it’s the same but 1:00. This could easily cause a crash. The issue has been confirmed by Parkway Chrysler in Pampa, TX. As far as I know, no representative of the manufacturer has inspected the component other than the dealer service center. All warning messages (Service Power Steering in the gauge cluster) are concurrent with the temporary failure described above; no prior warning is offered.
Intermittent loss of power steering, giving the sensation of "sticking" when the wheel is turned about 30 degrees clockwise. Generally happens at highway speeds, but can happen at lower speeds too. Steering feels locked me momentarily, needing extra force to either continue the turn past 30 degrees or to bring it back to center.
Head gasket blown! Vehicle is under 100k miles, never overheated, service properly maintained. When researching symptoms, I discovered I am one of hundreds if not thousands of 2017-2018 model Pacifica owners who have suffered this issue. Heads are known to be faulty and Chrysler will not address the root of it. It's very possible this could lead to a locked engine while driving and cause harm to driver or others.
Intermittent Loss Of Electric Power Steering. Steering sticks at 11:00 and 1:00 and has to be pulled back to prevent running of the road. NHTSA Action Number- PE25009
I have a 2018 Chrysler Pacifica with approximately 125,000 miles. At around 110,000 I started to notice that the steering would randomly stick when driving at speeds between 25-45 mph. Now, the steering wheel is beginning to stick almost everytime I drive the van, but seems to get worse after about 20-30 minutes of driving. This now seems like a severe safety hazard at both neighborhood and highway speeds. As I turn the wheel when driving down the road, the steering wheel becomes physically stuck when passing through the 11 o'clock and 1 o'clock positions. In order to return the wheel to 12 o'clcok, I have to extert extra force, can feel the power steering kick back in, and the van will sharply react as the steering wheel straightens risking an over-correction accident. This is now a recurring issue and makes it very difficult and dangerous to drive my vehicle. These symptoms seem to exactly match what my research has uncovered online regarding a failing steering rack and column. I believe a NHTSA invesigation has already been opened into this safety issue (seems to match the description for NHTSA PE25009).
The steering wheel of my 2018 Chrysler Pacifica sticks when I turn to the left (around 10-11 o'clock) and to the right (around 1-2 o'clock). Going about 40 miles per hour I can take my hands off the wheel and the steering will continue to stay locked in that position until I push it out of that locked position. I still own this vehicle as it is our family vehicle. If you are a driver that allows the steering wheel to turn itself back straight and not realize that it sticks, this could cause an accident. Even forcefully turning back causes an over correction and it is getting worse. Have not gotten it inspected yet. This issue just started within the last 2 weeks, August/September 2026. There are no warning lights. Main battery has no corrosion. Vehicle has 96,966 miles on it. Seems related to -- NHTSA CAMPAIGN NUMBER: PE25009
The contact owns a 2018 Chrysler Pacifica. While the contact's son was driving at an undisclosed speed, the shifter module warning light illuminated. The dealer was contacted by phone and was made aware of the failure. The vehicle was towed to the dealer where it was diagnosed with a shifter module failure. The contact was informed that the shifter module needed to be replaced. The vehicle was repaired; however, the failure reoccurred. While the contact's son was driving at an undisclosed speed, the brake pedal was depressed; however, the vehicle failed to stop as intended. In addition, the steering wheel failed to turn in the intended direction and several unknown warning lights illuminated. The vehicle was driven to the residence. The contact stated that the following day, the vehicle was started; however, the gear shifter failed to shift as needed. The dealer was contacted by phone and made aware of the failure. The vehicle was towed to the dealer, and the battery was replaced, but the failure reoccurred. The dealer was contacted by phone and made aware of the failure. The vehicle was towed to the dealer; however, the failure was not duplicated. The contact was informed that the failure was possibly caused by the wiring harness. The vehicle was not repaired. The contact was informed that the parts were discontinued. The manufacturer was contacted by phone, and a case was filed. The failure mileage was approximately 82,000.
I am a disabled Army veteran reporting a severe safety defect and dangerous commercial configuration of adaptive mobility equipment installed by Mobility Works ([XXX]). The business sold me a 2018 Chrysler Pacifica wheelchair van with a heated transfer seat sight-unseen. The dealership delivered a completely non-conforming transfer seat that did not match the photo I bought it from and listed on the window sticker or marketing materials. The installed seat was missing critical structural spacer component, causing the driver's seat to wobble and was especially bad while turning. Furthermore, the vehicle frame creaks loudly under the weight of a VA-issued 400lb power wheelchair, indicating underlying structural collapse from a hidden September 8, 2018, insurance total-loss salvage event. On XXX, the non-conforming transfer seat failed completely. It jammed and refused to rotate, trapping me inside the vehicle. Because of my physical disability, I was entirely helpless and stranded, requiring an emergency response from 911 personnel to extract me from the vehicle. The dealer's regional service manager has inspected the vehicle and admitted that a spacer was missing that cause the seat to wobble and drivers needing 3" cushion to sit on to see over the dash. The vehicle represents a severe, active life-safety hazard to disabled consumers. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
The Office of Defects Investigation (ODI) is opening this Preliminary Evaluation to assess the scope, frequency, and potential safety consequences of alleged defects related to the electric power steering (EPS) system in model year (MY) 2017–2018 Chrysler Pacifica vehicles. ODI has received 94 Vehicle Owner Questionnaires (VOQs) reporting a condition in which the steering system exhibits a sticking sensation during gradual turns, particularly when the steering wheel is positioned near the 11 o'clock or 1 o'clock position. Complainants allege that during these events, increased steering effort is required to return the wheel to center. In many cases, this is followed by a sudden reactivation of EPS assistance, which may result in an oversteer condition. This behavior could increase the risk of a crash, especially at higher speeds. ODI has identified multiple VOQs describing similar symptoms. This investigation will assess the frequency, root cause, and potential safety-related consequences of the alleged EPS malfunction. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
On July 22, 2022, the Office of Defects Investigation (ODI) opened investigation PE22-008 regarding complaints alleging a loss of motive power condition potentially due to a transmission malfunction in Model Years 2019-2021 Chrysler Pacifica Plug-In Hybrid Electric Vehicles (PHEV). On January 17, 2023, Fiat Chrysler Automobiles (FCA) issued safety recall (NHTSA Recall 23V-010) involving 2017-2023 Model Years (MY) Pacifica Plug-In Hybrid Electric Vehicles (PHEV) produced between August 12, 2016, through January 9, 2023. The recall states that the loss of motive power condition in these vehicles is caused by an internal transmission wiring connector that may short circuit, resulting in an unexpected engine shutdown. An unexpected engine shutdown can cause a loss of drive power, increasing the risk of a crash. In discussions with FCA on Recall 23V-010, ODI confirmed the recall was related to investigation PE22-008. The remedy for 23V-010 is to update the Power Inverter module (PIM) and/or Instrument Panel Cluster (IPC) software to provide drivers a message stating “Stop Safely - Vehicle Will Shut Off Soon” followed by a chime and MIL, PRNDL blinking (on cluster and shifter knob), low SOC (State of Charge) warning and reduced power mode. The recall remedy does not replace the defective hardware that was described in Recall 23V-010, and the wiring connector short still exists on these vehicles. To date, ODI has received 132 reports for the population of vehicles subject to recall 23V-010. These reports allege a loss of motive power condition that reduces the vehicles speed, followed by dashboard warning lamps displaying messages associated with recall 23V-010. The presence of these warning lamps and messages indicates the vehicle likely had the recall remedy applied. Follow up discussions with FCA confirm their remedy does not prevent a loss of motive power, but instead limits torque to the engine and after an unspecified number of miles or period of time, the engine will shut down. When this occurs, FCA relies on the owner to transport the vehicle to a dealership after they experience a loss of motive power condition, at which time the defective hardware is replaced. Furthermore, the dashboard messages introduced in the recall remedy may cause the driver to pull over in an unsafe location. Pulling over in an unsafe location may expose the occupants to undue harm. The Office of Defects Investigation is opening this Recall Query (RQ) to assess the adequacy, frequency, and safety consequence of the remedy for recall 23V-010. To review the ODI reports cited in the opening resume ODI report identification number document, go to NHTSA.gov.
On February 11, 2022, Fiat Chrysler Automobiles (FCA) issued a safety recall (NHTSA Recall 22V-077) on all 2017-2018 Pacifica Plug-In Hybrid Electric Vehicles (PHEV) produced between August 12, 2016 through August 7, 2018. The recall addresses ignition “OFF’ fires that originate at the high voltage (HV) battery pack assembly. An ignition ‘OFF’ vehicle fire can result in an increased risk of occupant injury, injury to persons outside the vehicle, and property damage, with little to no warning. At the time of the recall filing the root cause of the vehicle fires was unknown and under investigation by FCA and suppliers. A software remedy designed to improve thermal event detectability by monitoring battery diagnostics is currently being installed on subject vehicles as an interim remedy. As of November 23, 2023, the root cause of the battery failure is unknown. From December 2022 through December 2023, NHTSA has received four consumer complaints (VOQs) alleging vehicle thermal events involving recalled 2017 and 2018 Chrysler Pacifica PHEVs. Additional information collected from complainants confirmed a thermal event originating near or at the HV battery pack after the Recall 22V077 remedy had been applied to the vehicle. Follow up meetings with FCA and suppliers in November and December 2023 to discuss the ongoing root cause investigation and post-recall remedy incidents indicated a recent increase in HV battery thermal events. Furthermore, a review of NHTSA complaint data indicated the post-recall HV battery thermal event complaint rate now exceeds pre-recall levels. The Office of Defects Investigation (ODI) is opening this Recall Query (RQ) to review the effectiveness of the original recall remedy, understand the root cause of the battery fires, investigate additional reports of Pacifica PHEV HV battery fires, and to increase monitoring of the manufacturer root cause investigation. To review the ODI reports cited in the Opening Resume ODI Report Identification Number document, go to NHTSA.gov.
On July 22, 2022, the Office of Defects Investigation (ODI) opened PE22008 to investigate allegation of loss of motive power, potentially due to transmission malfunction, in certain Chrysler Pacifica vehicles. In a January 17, 2023 letter to NHTSA, Fiat Chrysler Automobiles (FCA) submitted recall notice 23V-010 involving a transmission motor wiring defect in 67,118 model year (MY) 2017-2023 Chrysler Pacifica plug-in hybrid electric vehicles (PHEVs) manufactured from August 12, 2016 through January 9, 2023. FCA determined that an internal transmission connector short could result in an unexpected engine shutdown under certain conditions. Follow up correspondence with FCA confirmed this defect results in an electric motor position trouble code that was the basis for opening PE22008, therefore NHTSA is closing this investigation. The 23V-010 recall remedy is a software update to address the hardware failure associated with PE22008. When a hardware failure is detected, the vehicle limits motive power while instructing the driver to pull over to a safe location. NHTSA is concerned that drivers will pull over to an unsafe location when the warning message associated with the recall remedy displays on the dashboard. Due to the nature of the recall remedy and related reports, NHTSA has opened Recall Query RQ24004 to assess the recall remedy. The reports and failure report summary values included with this closing action are related to allegations of Recall 23V-010 remedy inadequacy. The Agency reserves the right to take additional action if warranted by future circumstances. To review the ODI reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.