2011 Ford Fusion
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › Fusion › 2011
These records cover every 2011 Ford Fusion. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
9 recalls name the 2011 Ford Fusion. Newest first.
Ford Motor Company (Ford) is recalling certain 2007-2011 Ranger, 2006-2012 Fusion, Lincoln Zephyr, Lincoln MKZ, 2006-2011 Mercury Milan, 2007-2010 Ford Edge, and Lincoln MKX vehicles. The driver's side air bag inflator may explode due to propellant degradation occurring after long-term exposure to high absolute humidity, high temperatures, and high…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy
Ford will notify owners, and dealers will replace the driver-side airbag inflator or module with an alternate one, free of charge. Owner notification letters were mailed on April 9, 2021 for the passenger side, and November 14, 2022 for the driver side. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S12.
Ford Motor Company (Ford) is recalling certain air bag inflator and/or module replacement service parts that may have been used as part of a collision repair. The parts include certain driver-side air bag inflators and/or modules, designed to fit 2005-2014 Ford Mustang and Mustang GT500. It also includes certain passenger-side air bag inflators and/or…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the frontal air bag, an inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Ford will notify dealers that purchased the affected parts, and dealers will provide replacement parts to purchasers, free of charge. The recall began March 18, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S05.
Ford Motor Company (Ford) is recalling certain 2005-2014 Mustang, 2004-2011 Ranger, 2009-2011 Mercury Milan, 2006 Ford GT, 2008-2012 Fusion, 2007-2010 Edge and Lincoln MKX, and 2009-2010 Lincoln MKZ vehicles. These vehicles may be equipped with a driver or passenger frontal air bag inflator used as a replacement service part, that may explode due to…
Risk and remedy
Risk
In the event of a crash necessitating deployment of the frontal air bag, an inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Ford will notify owners, and dealers will inspect the driver and passenger air bag module, and replace either the module or the inflator, if necessary, free of charge. The recall began March 17, 2021. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 21S05.
Ford Motor Company (Ford) is recalling certain 2014 Ford Mustang vehicles sold, or ever registered, in the states of Alabama, California, Florida, Georgia, Hawaii, Louisiana, Mississippi, South Carolina, Texas, Puerto Rico, American Samoa, Guam, the Northern Mariana Islands (Saipan), and the U.S. Virgin Islands or "Zone A." Additionally, Ford is…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. The recall began February 13, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall 19S01.
Ford Motor Company (Ford) is recalling certain model year 2007-2011 Ford Ranger vehicles, 2006-2011 Ford Fusion, Mercury Milan and Lincoln Zephyr/MKZ vehicles, 2007-2010 Ford Edge, Lincoln MKX vehicles, 2005-2006 Ford GT vehicles, and 2005-2011 Ford Mustang vehicles originally sold, or ever registered, in Alabama, California, Florida, Georgia, Hawaii…
Risk and remedy
Risk
An inflator rupture may result in metal fragments striking the vehicle occupants resulting in serious injury or death.
Remedy
Owners are advised not to drive their vehicles until the repair has been performed. Ford will notify owners, and dealers will replace the passenger frontal air bag inflator, free of charge. Ford mailed interim letters informing owners that parts are not yet available on July 15, 2016. Owners will receive a second notice when remedy parts become available. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S01.
Ford Motor Company (Ford) is recalling certain model year 2010-2011 Ford Fusion vehicles manufactured July 21, 2008, to March 4, 2011, and 2010-2011 Mercury Milan vehicles manufactured July 23, 2008, to December 10, 2010. The affected vehicles have fuel vapor canisters whose purge valves may not operate properly resulting in abnormal pressure changes in…
Risk and remedy
Risk
The pressure changes may cause the tank to crack and leak fuel. A fuel leak in the presence of an ignition source increases the risk of a fire.
Remedy
Ford will notify owners, and dealers will update the vehicle powertrain control modules and inspect the vehicle for any diagnostic trouble codes (DTCs) for this issue and perform a leak test on the Canister Purge Valve (CPV). The fuel tank will be inspected for cracks. The CPV and fuel tank will be replaced as necessary. These repairs will be performed free of charge. The recall began on January 15, 2016. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S34.
Ford Motor Company (Ford) is recalling certain model year 2011-2012 Ford Fusion vehicles without a 3.5L engine and Lincoln MKZ hybrid electric vehicles, 2011 Mercury Milan vehicles, 2011-2012 Ford Taurus, Ford Flex, Lincoln MKS, and Lincoln MKT vehicles equipped with a 3.5L GTDI engine and 2013 Ford Taurus, Ford Flex, Lincoln MKS, and Lincoln MKT vehicles…
Risk and remedy
Risk
If the vehicle experiences a loss of power steering assist, extra steering effort will be required at lower speeds, increasing the risk of a vehicle crash.
Remedy
Ford will notify owners, and dealers will check the Power Steering Control Module (PSCM) for Diagnostic Trouble Codes (DTC). If dealers find any loss of steering assist DTCs, the steering gear will be replaced, free of charge. If, no codes are found during the PSCM inspection, the PSCM software will be updated, free of charge. The recall began on July 21, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S18.
Ford Motor Company (Ford) is recalling certain all weather driver side accessory floor mats sold for use in model year 2006-2011 Ford Fusion and Mercury Milan, 2006 Lincoln Zephyr, and 2007-2011 Lincoln MKZ vehicles manufactured November 9, 2007, through October 31, 2010. The affected floor mats may move and possibly interfere with the accelerator pedal.
Risk and remedy
Risk
The floor mat could shift such that it could interfere with the accelerator pedal, preventing its return to an idle position, which could result in unintended vehicle speeds, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will install new replacement mats, free of charge. The recall began in July 2014. Owners may contact Ford's customer service at 1-800-392-3673. Ford's number for this recall is 14S07. NOTE: Vehicles built after October 31, 2010, while potentially equipped with the same floor mats, are equipped with a Brake Over Accelerator (BOA) feature that prevents simultaneous accelerator and brake application, allowing the vehicle to be safely stopped by pressing firmly and steadily on the brake pedal.
Ford IS recalling certain model year 2010-2011 ford fusion and mercury milan vehicles equipped with 17 inch steel wheels and built from april 1, 2009, through april 30, 2009, and from december 1, 2009, through november 13, 2010. the wheel studs may fracture, potentially causing a wheel to separate.
Risk and remedy
Risk
While driving, multiple stud fractures could occur at the wheel location, and the operator may experience vehicle vibration and/or wheel separation, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will inspect the rear brake disc surface for flatness and replace the discs as necessary. Additionally, the wheel lug nuts will be replaced on all four wheels. the safety recall IS expected to begin on or about january 24, 2012. owners may contact the ford motor company customer relationship center at 1-866-436-7332.
Owner complaints
2,795 complaints80 involved a crash11 involved a fire46 injuries1 deaths
What owners report most
Latest complaints
- Steering
The power steering is messed up
- Electrical system
The vehicle caught fire July 7, 2026 after it was parked and we were in bed, woke up to the front dash and under the steering wheel being melted. The ignition was melted severe damage to the entire driver's side
- Steering
My mom’s 2011 Ford Fusion SEL experienced a loss of electric power steering assistance. I cannot determine the exact moment the failure occurred. When I started the vehicle and attempted to drive away, I noticed that the steering wheel was extremely stiff. The dashboard displayed a “Power Steering…
My mom’s 2011 Ford Fusion SEL experienced a loss of electric power steering assistance. I cannot determine the exact moment the failure occurred. When I started the vehicle and attempted to drive away, I noticed that the steering wheel was extremely stiff. The dashboard displayed a “Power Steering Assist Fault” warning. The steering assistance has not returned, including after replacing the vehicle’s battery. I diagnosed the vehicle using FORScan, which identified the following diagnostic trouble codes in the Power Steering Control Module (PSCM): U3000:96-C8 — Control Module, Component Internal Failure. C200C:2F-48 — Steering Shaft Torque Sensor 2, Signal Erratic. Both codes were recorded as previously set and not present at the time of the diagnostic request. However, the power steering warning remains displayed and the steering wheel remains extremely difficult to turn with the engine running. This vehicle was previously included in Ford Safety Recall 15S18 / NHTSA Recall 15V340, addressing loss of electric power steering assistance. Ford confirmed that the recall was completed in 2015 through reprogramming the Power Steering Control Module only rather than replacing the steering gear. The current diagnostic codes are specifically identified in Ford’s original recall service instructions as codes associated with steering gear replacement under the recall procedure. I contacted Ford customer service regarding the recurrence of loss of steering assistance. Ford opened a case for internal review but did not confirm repair coverage or provide a decision timeline. I am reporting this because the vehicle has lost power steering assistance despite having previously received the recall remedy. I am concerned that the original safety-related condition may not have been permanently resolved.
- Steering
The contact owns a 2011 Ford Fusion. The contact stated that while driving at an undisclosed speed, the vehicle suddenly lost power steering assist, nearly causing the contact to lose steering control as the steering locked up, and an audible warning chime sounded. The contact safely maintained…
The contact owns a 2011 Ford Fusion. The contact stated that while driving at an undisclosed speed, the vehicle suddenly lost power steering assist, nearly causing the contact to lose steering control as the steering locked up, and an audible warning chime sounded. The contact safely maintained control of the vehicle and observed that a power steering warning light was illuminated. The contact associated the failure with NHTSA Campaign Number: 15V340000 (Steering); however, the VIN was not included in the recall. The vehicle was towed to the residence. The manufacturer was notified of the failure. The failure mileage was 100,000.
- Steering
The contact owns a 2011 Ford Fusion. The contact stated that while his daughter was driving 35 MPH and making a turn, the vehicle almost crashed into the neighbor's lawn because the steering wheel had seized. The contact's daughter stated that the steering wheel was firm and required extra effort…
The contact owns a 2011 Ford Fusion. The contact stated that while his daughter was driving 35 MPH and making a turn, the vehicle almost crashed into the neighbor's lawn because the steering wheel had seized. The contact's daughter stated that the steering wheel was firm and required extra effort to turn the steering wheel. Additionally, at the time of the failure, the contact's daughter claimed that there were three dinging sounds, like when putting the keys into the ignition of the vehicle. An unknown warning light was illuminated. The failure was a recurring failure. The contact associated the failure with NHTSA Campaign Number: 15V340000 (Steering); however, the VIN was not included in the recall. The dealer was contacted. The manufacturer was contacted by phone and made aware of the failure. The failure mileage was approximately 211,000.
- Steering
I am filing an official complaint against Grieco Ford of Fort Lauderdale regarding Safety Recall 15S18 (NHTSA Campaign 15V340) for my 2011 Ford Fusion. The official recall status is 'Recall Incomplete'. The dealership refused to perform the mandatory safety repair, claiming that the vehicle's…
I am filing an official complaint against Grieco Ford of Fort Lauderdale regarding Safety Recall 15S18 (NHTSA Campaign 15V340) for my 2011 Ford Fusion. The official recall status is 'Recall Incomplete'. The dealership refused to perform the mandatory safety repair, claiming that the vehicle's factory warranty has expired. According to federal law, safety recalls do not expire and must be performed free of charge regardless of warranty status. Because of this unlawful refusal, my vehicle remains deactivated on Lyft, causing me immediate loss of income. Please investigate this dealership's failure to remedy a federal safety recall.
- Steering
The contact owns a 2011 Ford Fusion. The contact stated that while driving at various speeds, the steering wheel became stiff and excessive force was needed to make a left or right turn. The power steering assist and Advancetrac warning lights were illuminated. The vehicle was taken to a local…
The contact owns a 2011 Ford Fusion. The contact stated that while driving at various speeds, the steering wheel became stiff and excessive force was needed to make a left or right turn. The power steering assist and Advancetrac warning lights were illuminated. The vehicle was taken to a local dealer where it was diagnosed and confirmed that the rack and pinion needed to be replaced. The contact stated that the vehicle was previously taken to a local independent mechanic; however, the failure was not duplicated. The manufacturer was made aware of the failure. The failure mileage was approximately 56,000.
- Steering
My steering got rough out of nowhere I just been driving regular I need help. Because I almost crashed
- Steering
Turning on my car and the message power steering asstist fault comes on. Turning g off the car would work for awhile but not now. We got a new battery and that didn't help. I had the recall done in 7/30/2015. I called Ford 10/2/2026 and they said even tho I had very low miles the 10 years had…
Turning on my car and the message power steering asstist fault comes on. Turning g off the car would work for awhile but not now. We got a new battery and that didn't help. I had the recall done in 7/30/2015. I called Ford 10/2/2026 and they said even tho I had very low miles the 10 years had passed first so the one time fix wouldn't apply. Someone may call me from Ford to ask further details. Also advised to save receipts on any repairs I do in case there is a chance down the road I can be reimbursed! I said that's absurd Ford isn't standing behind this issue, knowing it's an ongoing problem with many of the cars since the recall was done!
- Unknown or other
Unknown
- Steering
The contact owns a 2011 Ford Fusion. The contact stated that while driving 35 MPH, the vehicle lost power steering assist, making the steering wheel difficult to turn and causing the vehicle to wobble from side to side. The message "Power Steering Assist" was displayed, and an unknown warning light…
The contact owns a 2011 Ford Fusion. The contact stated that while driving 35 MPH, the vehicle lost power steering assist, making the steering wheel difficult to turn and causing the vehicle to wobble from side to side. The message "Power Steering Assist" was displayed, and an unknown warning light illuminated. The contact stated that the failure posed a safety risk to the contact and her children. The contact pulled over to the side of the road, and the vehicle was towed to her parent's residence. The contact associated the failure with NHTSA Campaign Number: 15V340000 (Steering); however, the VIN was not included in the recall. The manufacturer was notified of the failure by phone.
- Electrical system · Steering
Unknown
- Vehicle speed control
The contact owns a 2011 Ford Fusion. The contact stated that while driving at an undisclosed speed, the vehicle independently accelerated while the brake pedal was depressed. No warning light was illuminated. The failure reoccurred on several occasions. The vehicle was towed to a tow yard; however…
The contact owns a 2011 Ford Fusion. The contact stated that while driving at an undisclosed speed, the vehicle independently accelerated while the brake pedal was depressed. No warning light was illuminated. The failure reoccurred on several occasions. The vehicle was towed to a tow yard; however, the vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 58,000.
- Steering
The vehicle experienced a sudden, complete failure of the electronic power steering assist while operating, resulting in a dangerous increase in steering effort and an immediate safety hazard. A professional OBD-II diagnostic scan retrieved active trouble codes C1277-20 (Steering Wheel Angle Sensor…
The vehicle experienced a sudden, complete failure of the electronic power steering assist while operating, resulting in a dangerous increase in steering effort and an immediate safety hazard. A professional OBD-II diagnostic scan retrieved active trouble codes C1277-20 (Steering Wheel Angle Sensor Signal Failure) and C1963-20 (Stability Control Inhibit Warning). This internal sensor failure matches the exact physical defect detailed in NHTSA Campaign Number 15V340000 (Ford Recall 15S18). Ford Corporate and the local dealership refuse to authorize a hardware replacement because they claim a software update completed in 2015 closed the recall on this VIN, despite the software patch failing to prevent the underlying physical hardware failure.
- Steering
Yesterday evening, my power steering went out (EPAS), it did that when the car had been parked for the night and not in motion thankfully so nobodies safety was at risk, but I don’t know if and when it’ll happen again. According to Ford, it has been a recurring problem with ford fusion modules…
Yesterday evening, my power steering went out (EPAS), it did that when the car had been parked for the night and not in motion thankfully so nobodies safety was at risk, but I don’t know if and when it’ll happen again. According to Ford, it has been a recurring problem with ford fusion modules similar to mine, that the EPAS has been defective, and therefore making it dangerous to drive. My exact car has been inspected by a mechanic, and while it has been looked at, there were no warnings of this error happening, the vehicle was driving fine and all of a sudden, the error occurred.
- Electrical system
On July 4, the electrical system under the dash caught fire and burned the ignition and dash, all the electrical under the dash
- Steering
See attached document for complaint.
- Steering
Having loss of power steering assist the advanced trac peering steering says service now I feel it should fall under a recall cause I took it to a mechanic shop and they told me they ford fusion have issues with the power assist steering cause it goes out
- Electrical system · Steering
The power steering keeps going out after it was brought in for recall years ago and the recall is up the the issue keeps goin on with the car I don't understand what to do because the shop i brought it to said the power steering is brand new they don't understand why it's even doin it and also they couldn't even reprogram the system I wanted to know why doesn't ford fix this and why wouldn't they want to help
- Steering
The contact owns a 2011 Ford Fusion. The contact stated that while driving at 65 MPH, the power steering became inoperable. While reversing, the steering wheel became inoperable but corrected itself. No warning lights were illuminated. The contact stated the failure was related to NHTSA Campaign…
The contact owns a 2011 Ford Fusion. The contact stated that while driving at 65 MPH, the power steering became inoperable. While reversing, the steering wheel became inoperable but corrected itself. No warning lights were illuminated. The contact stated the failure was related to NHTSA Campaign Number: 15V340000 (Steering). The local dealer was called, who confirmed there were only certain vehicles covered. The dealer informed there was no recall coverage for his VIN. The vehicle was not diagnosed or repaired. The dealer referred him to the manufacturer. The manufacturer was contacted, but no additional assistance was provided. The failure mileage was approximately 165,000.
- Steering
The contact owns a 2011 Ford Fusion. The contact stated while driving at an undisclosed speed, the steering wheel failed to steer in the intended direction. In addition, the power steering failure warning light illuminated. The contact had to apply all of her strength to turn the steering wheel in…
The contact owns a 2011 Ford Fusion. The contact stated while driving at an undisclosed speed, the steering wheel failed to steer in the intended direction. In addition, the power steering failure warning light illuminated. The contact had to apply all of her strength to turn the steering wheel in the intended direction. The vehicle was driven to the contact's residence. The vehicle was not diagnosed or repaired by an independent mechanic or dealer. The contact referenced an unknown recall which had a similar failure description, however the contact's VIN was not associated. The manufacturer was not made aware of the failure. The failure mileage was unknown.
- Steering
The contact owns a 2011 Ford Fusion. The contact stated that while driving at a low speed, the steering wheel became difficult to turn. The vehicle was turned off and restarted, and the steering wheel started operating as intended. The dealer was contacted; however, the vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was unavailable.
- Steering
The contact owns a 2011 Ford Fusion. The contact stated that upon starting the vehicle, the message "Service Power Steering Now" was displayed and the steering wheel was difficult to turn. The vehicle was restarted and regained power steering functionality. The following day, the vehicle was taken…
The contact owns a 2011 Ford Fusion. The contact stated that upon starting the vehicle, the message "Service Power Steering Now" was displayed and the steering wheel was difficult to turn. The vehicle was restarted and regained power steering functionality. The following day, the vehicle was taken to the dealer, and an appointment was scheduled for the vehicle to be diagnosed and repaired. Upon investigation, the contact discovered NHTSA Campaign Number: 15V340000 (Steering); however, the VIN was not included in the recall. The vehicle was not repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 44,000.
- Electrical system · Steering
On my 2011 Ford Fusion the power steering has failed and it seems to be covered by 15V340000 (15S18), specially supplement 3 but the dealership doesn't wish to acknowledge the warranty replacement. Currently the vehicle cannot be driven safely. I have had several mechanics look at the vehicle including a Ford authorized dealership. The suggested fix is as explained in the 15V340000 (15S18) and 15N01.
- Steering
The contact owns a 2011 Ford Fusion. The contact stated that while driving at approximately 35 MPH, the steering wheel became difficult to turn left or right. The contact stated that an unknown warning light was illuminated, and the message "Service Power Steering Now" was displayed. The contact…
The contact owns a 2011 Ford Fusion. The contact stated that while driving at approximately 35 MPH, the steering wheel became difficult to turn left or right. The contact stated that an unknown warning light was illuminated, and the message "Service Power Steering Now" was displayed. The contact had not taken the vehicle to a local dealer or independent mechanic to be diagnosed or repaired. The contact stated that the steering wheel failed to turn as needed. The contact researched online and related the failure to NHTSA Campaign Number: 15V340000 (Steering); however, the VIN was not included in the recall. The manufacturer was not informed of the failure. The failure mileage was approximately 120,000.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Power Steering Failure
On September 28, 2016, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE16-011) to investigate claims of power steering assist loss on model year (MY) 2010 Ford Fusion vehicles. During the PE, ODI received 718 unique claims related to the alleged problem with 598 reports indicating the…
On September 28, 2016, the Office of Defects Investigation (ODI) opened a Preliminary Evaluation (PE16-011) to investigate claims of power steering assist loss on model year (MY) 2010 Ford Fusion vehicles. During the PE, ODI received 718 unique claims related to the alleged problem with 598 reports indicating the power steering assist failed while driving at various speeds with no warning. Ford Motor Company (Ford) provided 1,851 unique reports and 1,720 warranty claims related to the alleged problem. It should be noted that as the result of investigation PE14-030, Ford conducted a safety recall (15V-340) ofMY 2011-2012 Ford Fusion and other vehicles using the same electric power assist steering unit to rectify incidents of loss of power steering assist. On November 20, 2017, PE16-011 was upgraded to this Engineering Analysis (EA17-004) to further assess the scope, frequency, and consequence of this failure. This was based on an analysis of the subject vehicle complaint data that had indicated an increased likelihood of failure as the vehicles age. At the time, the rate of occurrence of this failure was comparable to previous investigations involving loss of power steering assist including the previously mentioned PE14-030. During the EA, ODI’s analysis of the alleged defect in the subject vehicles identified the following: testing showed minor steering effort changes between “assist” and “no assist”, no root cause identified, a declining failure trend, the ramp-down or reduced assist provided when a DTC is set, a lower failure rate than the recalled Fusion vehicles, and the high age of the vehicles. A safety-related defect trend has not been identified. Accordingly, this Engineering Analysis is closed. See the attached Engineering Analysis Closing Report for details. The closing of this investigation does not constitute a finding by NHTSA that a safety defect does not exist, and ODI will take further actions if warranted by future circumstances. To review the reports cited in the Closing Resume ODI Report Identification Number document, go to NHTSA.gov.
- Electric power steering failure
The Office of Defects Investigation (ODI) opened a preliminary evaluation to investigate complaints of the loss of power steering while driving. The subject vehicles are equipped with a rack mounted Electric Power Assisted Steering (EPAS) unit.Some of the complaints alleged that the steering assist failed and resulted…
The Office of Defects Investigation (ODI) opened a preliminary evaluation to investigate complaints of the loss of power steering while driving. The subject vehicles are equipped with a rack mounted Electric Power Assisted Steering (EPAS) unit.Some of the complaints alleged that the steering assist failed and resulted in increased steering efforts that contributed to a loss of control and in some cases a crash.The EPAS system was manufactured by TRW Automotive for Ford and was designated as Generation I.These units were first produced and put into vehicle production in July 2008 beginning with the model year (MY) 2010 Ford Fusion and Mercury Milan.The system is comprised of a mechanical steering rack-and-pinion gear with torque sensor, electric assist motor, motor position sensor and a power steering control module (PSCM). The PSCM is self-monitoring and designed to detect faults within the system and can store diagnostic trouble codes (DTCs) if a problem is detected.There are 29 potential DTCs the system can detect.Many of these allow the system to go into reduced-assist steering mode by using the default vehicle speed signal should the live speed signal be lost, if voltage to EPAS system falls below 10.7 or goes above 17 volts, the temperature at the PSCM goes above 105C (221F), or if high friction is detected.Some DTCs will cause the system to go into manual steering mode (no assist). On July 1, 2015, Ford filed a Defect Information Report (DIR) identifying a safety related defect in TRW GEN I EPAS systems installed in some of the subject vehicles (NHTSA Recall 15V-340, Ford No. 15S18).The DIR indicated that intermittent electrical connections caused by quality issues associated with conformal coat contamination and ribbon cable pin misalignment within the steering gear motor may lead to a loss of the motor position sensor signal, resulting in a sudden loss of power assist while driving.The recall covers approximately 393,623 vehicles built from September 2010 through February 2012:2011-12 Fusion built SEP 2010 - FEB 2012; 2011-12 Lincoln MKZ built SEP 2010 - FEB 2012; 2011 Milan built SEP 2010 - DEC 2010; 2011-13 Taurus built SEP 2010 - FEB 2012; 2011-13 Flex with 3.5L GTDI engine built SEP 2010 - FEB 2012; and 2011-13 MKS, MKT with 3.5L GTDI engine built SEP 2010 - FEB 2012.The repair consists of updating the PSCM software to prevent a loss of steering assist while driving. The revised software will provide audible and visual warnings to the driver. If one or more of the following DTCs are stored, C1B00-62, C200B-2F, C200B-61, C200B-62, C200C-2F, C200D-49, U0300-00, U2011-49, U2011-61, U3000-46, U3000-49, U3000-61, U3000-72, U3000-96, P07AE-09, the dealer will replace the EPAS system at no charge to the owner.ODI's analysis of failure data for this PE identified a total of 2,584 complaints to ODI and Ford and 9,967 Ford warranty claims related to the alleged defect.The recalled vehicles account for 1,634 of the complaints and 7,311 of the warranty claims.ODI's analysis identified 40 complaints alleging crashes that may be related to loss of steering assist while driving, 20 of which involved vehicles included in Ford's recall.The information available for the alleged crashes were not sufficient to assess specific causes of the incidents or to verify EPAS malfunctions in each case.Most of the crashes were low-speed impacts with curbs or roadside objects resulting in wheel or minor body damage.None of the injury claims indicated medical attention was required.In addition, statistical modeling of the failure data by NHTSA's National Center for Statistics and Analysis projected 10-year failur
- Electronic Throttle Body Malfunction
On February 21, 2013, the Office of Defects Investigations (ODI) opened Preliminary Evaluation PE13-003 to investigate allegations of electronic throttle body (ETB) failures resulting in sudden reduction of engine power in model year (MY) 2009-2013 Ford Escape, Fusion, Mariner and Milan vehicles. During this…
On February 21, 2013, the Office of Defects Investigations (ODI) opened Preliminary Evaluation PE13-003 to investigate allegations of electronic throttle body (ETB) failures resulting in sudden reduction of engine power in model year (MY) 2009-2013 Ford Escape, Fusion, Mariner and Milan vehicles. During this investigation, Ford identified a condition in subject vehicles equipped with 2.5L and 3.0L engines that may result in a sudden reduction of engine power.According to Ford, the ETB internal motor contacts may develop a high resistance material buildup condition on the commutator, resulting in intermittent electrical connectivity and reduced engine power. When this condition occurs, the Malfunction Indicator Lamp (MIL) or Wrench light will illuminate and the vehicle may enter a limited limp home mode.Ford?s trade name for the feature is Failure Mode Effects Management (FMEM) mode.In this mode, engine power and vehicle speed are reduced, while full function of the power steering, power braking, lighting, and climate control systems are maintained.ODI?s complaint analysis indicate that the predominant failure mode involved reduced motive power associated with the limited limp home mode with engine speeds limited to approximately 900 RPM. Analysis of warranty claims provided by Ford identified 59,807 claims related to ETB replacements and approximately 50 percent of claims are associated with diagnostic trouble codes (DTC) P2111, Throttle Body Stuck Open, and P2112, Throttle Body Stuck Closed.Ford described several factors where the ETB motor may fail resulting in DTCs P2111 or P2112 but the failure is not an existing stuck open or closed ETB valve position.According to Ford, the ETB control strategy provides the driver with three FMEM modes that allow varying degrees of vehicle mobility depending on the severity of the fault detected.DTCs associated with stuck open or closed throttle valves are designated the highest failure severity resulting in engine speeds limited to high idle corresponding to the limited limp home mode.Vehicles are not likely to unexpectedly stall as a result of this condition, but drivers may characterize the reduced functionality as a stall, even though their vehicle may still has motive capability.Other FMEM limp modes may result in reduced engine performance but will maintain vehicle speed above 20mph. During this investigation, Ford and its suppliers, Delphi and Igarashi, updated the powertrain control module (PCM) software to include a throttle body motor cleaning cycle during key-on and modified the ETB internal motor components design, surface finish and material composition to improve durability. Additionally, Ford developed a remedy procedure and issued a special Customer Satisfaction Program (CSP) 13N03 extending the ETB warranty coverage and instructing dealers to update the powertrain calibration to improve vehicle performance in the event that intermittent electrical connectivity of the throttle body motor contacts occurs. The program extends the coverage for up to 10 years of service or 150,000 miles from the warranty start date of the vehicle, all vehicles are eligible for the program through January 31, 2015 regardless of mileage.Owners of the affected vehicles will be contacted by mail to take their vehicle to a Ford dealer who will reprogram the PCM to the latest calibration. The bulletin was sent to dealers on January 17, 2014 and the owner letter mailing began on January 27, 2014. See the investigative file for copies of Ford's bulletin and owner letter. This preliminary evaluation is closed. The closing of this investigation does not constitute a finding that
- Floor mat interference with accelerator
On May 27, 2014, Ford Motor Company submitted recall 14E-028 (Ford recall #14S07) to correct a safety-related problem with certain driver's side Ford optional all-weather floor mats sold for use in model year 2006 through 2011 model year Ford Fusion, Mercury Milan, Lincoln Zephyr, and Lincoln MKZ vehicles built at…
On May 27, 2014, Ford Motor Company submitted recall 14E-028 (Ford recall #14S07) to correct a safety-related problem with certain driver's side Ford optional all-weather floor mats sold for use in model year 2006 through 2011 model year Ford Fusion, Mercury Milan, Lincoln Zephyr, and Lincoln MKZ vehicles built at Hermosillo Assembly Plant (HAP) from November 9, 2007, to October 31 ,2010.NHTSA testing determined that the original accessory all-weather mat with a single retention clip (Figure 1), may interfere with accelerator pedal return to idle with the mat retained by the clip and rotated clockwise.Both the single- and double-clip (Figure 2) all-weather floor mats may interfere with the accelerator pedal return to idle when the mats are not secured by the retention clip(s).Testing showed that this can occur if the mats are moved forward from the clipped position approximately two inches into a position in which the rear edge of the mats will abut the retention clip(s) when installed singly and align with the clip(s) when stacked on another floor mat.The pedal interference incidents reviewed by the Office of Defects Investigation (ODI) include 1 crash and 9 incidents with allegations of brake friction materials smoking and/or requiring repair for heat related damage.The crash incident occurred after the parking brake was applied at speed, resulting in loss-of-control vehicle yaw event caused by lock-up of the rear tires.The spin-out resulted in a side impact collision with an oncoming vehicle in an opposing lane of traffic. For the 29 incidents with sufficient information available to make an assessment; 23 (79%) were controlled by the driver either shifting to neutral, turning the engine off, or both; 4 (14%) were ended by the driver either kicking the pedal free (2) or pulling the mat away from the pedal (2); and 2 (7%) were ended by the pedal freeing itself from the mat with no apparent driver action.None of the drivers who reacted to the incident by shifting to neutral or turning the engine off reported any difficulties with either action.The subject mats were sold by Ford and Lincoln dealers directly to customers as an optional accessory equipment item or, beginning in November 2007, the mats were also available as a factory installed accessory if ordered with a new vehicle.Ford estimates that approximately 82,579 affected driver's side all weather floor mats were sold worldwide; either over the counter through Ford dealerships or as original equipment.Owners that purchased the subject all-weather floor mats as a factory installed accessory with their new vehicle will be notified to return their all weather floor mats to their Ford or Lincoln Dealership in exchange for replacement mats.Owners of all other potentially affected vehicles will be notified that, if they have an affected Ford driver's side all weather floor mat, they should return their mats to the dealership in exchange for replacement mats.The VOQs associated with the closing of this investigation are: 10327597, 10332233, 10334211, 10335336, 10339330, 10348772 (and duplicate 10342572), 10372674, 10379562, 10415911, 10426255, 10434107, 10521053, 10554966.This investigation is hereby closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10250305When performing any transmission fluid change or topoff involving Motorcraft Premium ATF, MERCON V has replaced all versions of Motorcraft Premium ATF and can be used going forward. Mixing Motorcraft Premium ATF and MERCON V in the same transmission is acceptable. After 31-Jan-2024, Motorcraft Premium ATF will no longer be manufactured and will only be available until inventory depletes.
- 10240415Certain 2005-2014 Mustang, 2005-2006 GT, 2004-2011 Ranger, 2006-2012 Fusion and MKZ/Zephyr, 2006-2011 Milan, and 2007-2010 Edge & MKX Vehicles Driver & Passenger Airbag Module Quality Control Inspection REASON FOR THIS SUPPLEMENT Updated Ranger Technical Information to include images of a pass and fail airbag inflator inspection for 2007-2011 model years.
- 10236689Some 2010-2012 Fusion/Milan and 2011-2012 MKZ vehicles equipped with a 2.5L or 3.0L engine and electronic power assist steering (EPAS), a remanufactured replacement steering gear (MU2Z-3V504-ARM) is available which is significantly less expensive than a new replacement gear. When conducting repairs that are customer pay, offer the customer a remanufactured gear when possible. This would include vehicles not included in field service action (FSA) 15N01 (built on or before 7-Sep-2010) or vehicles included in FSA 15N01 that have exceeded the 10 year/150,000 mile terms of the program.
- 10234103Some 2010-2012 Fusion hybrid electric vehicles (HEV), 2010-2011 Milan HEV and 2011-2012 MKZ HEV vehicles may experience reduced electric vehicle operation and increased gasoline engine operation around 10 years of vehicle age and beyond. This may be due to software in the battery energy control module (BECM) and the powertrain control module (PCM). To correct the condition, follow the Service Procedure to reprogram the BECM and PCM.
- 10209374Certain 2005-2014 Mustang, 2005-2006 GT, 2004-2011 Ranger, 2006-2012 Fusion & MKZ/Zephyr, 2006-2011 Milan, and 2007-2010 Edge & MKX Vehicles Driver & Passenger Airbag Module Quality Control Inspection: Ford Motor Company has determined that some vehicles claimed by dealers as repaired under Takata Airbag Safety Recalls 15S21, 17S42, 18S02, 19S01, and 21S12 may not have received the claimed repairs. The propellant in certain Takata airbag inflators can experience an alteration over time with exposure to certain climate conditions. A combination of time, high temperature fluctuations, and humidity contribute to the degradation of the propellant in the inflators. This degradation can cause the propellant to burn too quickly, creating high pressure inside the inflator, and in extreme cases causing the inflator to rupture in the event of a crash necessitating airbag deployment. A ruptured inflator can send inflator parts toward vehicle occupants resulting in serious injury or death. Additional information regarding Takata recalls can be found at www.nhtsa.gov and www.safercar.gov.
- 102050086F35 Transmission - Fluid leak at left side halfshaft seal - built on or before 10/14/2013
- 10164508Some 2010-2020 vehicles may exhibit distorted glass with a subtle orange peel pattern or streaking etched into the surface. This is caused by hydrofluoric acid which is used in some car wash solutions as a cleaning agent. Hydrofluoric acid can attack the glass and cause visual distortion and/or discoloration on the outer surface which cannot be removed by further cleaning. If this type of distortion is found, inspect the area of the glass that is covered by the cowl and/or molding. The portion of glass that is covered by the cowl or molding will not be affected by the acid. Hydrofluoric acid damage is not a defect in material or workmanship and is not a warrantable condition.
- 10160931On vehicles equipped with an automatic transmission it is imperative that the converter pilot hub be greased with Motorcraft Multi-Purpose Grease Spray XL-5-A even if grease was not applied from the factory. Also verify that the engine/transmission alignment dowel pins are present as well as the engine crankshaft dowel pin, if equipped, when installing the transmission. Failure to adequately lubricate the converter hub greatly increases the likelihood of the flexplate cracking in the future. Missing dowels may cause a misalignment issue also resulting in a premature failure. Refer to Workshop Manual (WSM), Section 307-01.
- 10140323The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10138524The Accessory (Wireless) Keyless Entry Keypad can only be used with vehicles that are factory built with Remote Keyless Entry (RKE). The master code for the Accessory (Wireless) Keyless Entry Keypad can be retrieved from FMCDealer - Parts and Service - Parts Product Line Information - Keys/Entry Devices - Aftermarket Keyless Entry Keypad Code Access. Access to this site is granted through Dealer Program Enrollment System (DPES) and Dealer Principal, General Manager or Parts and Service Director can authorize users. Once authorized the retrieval process for master code can be obtained. The master code for the Accessory Keyless Entry Keypad cannot be retrieved from the body control module(BCM) with a diagnostic tool.
- 10137113Replacing the original equipment SYNC/Navigation system with either an aftermarket SYNC/Navigation kit or modifying original SYNC/Navigation parts to provide additional features is not recommended nor supported on any Ford, Mercury or Lincoln vehicle. Only approved Genuine Ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: Monroney Label (Window Sticker), Professional Technician Society (PTS) OASIS tab select SYNC or HVBOM. For Genuine Ford accessories use: PTS Workshop Tab select Dealer Installed Accessory or Accessory Installation.
- 101365972010-2018 various vehicles equipped with SYNC or SYNC 3 may not function when attempting to find or use the Spotify app via AppLink. As of an update released on 1/15/2018 Spotify will no longer be supporting their AppLink integration. No repair attempts should be attempted to correct this concern.
- 10109070The Powertrain Control/Emissions Diagnosis (PC/ED) manual has been revised for diagnosing electronic throttle bodies (ETBs). The ETC_ACT and ETC_DSD PIDs should not used to diagnose possible ETB concerns. The IDS has a limited refresh rate when reading these PIDs and cannot display quickly enough to validate a concern. The PCM automatically monitors these inputs more accurately and will set diagnostic trouble codes (DTCs) when appropriate. Using these PIDs for diagnostics will lead to inaccurate results and improper ETB replacements. If a concern is intermittent and no DTCs are present, refer to historical DTCs and the PC/ED, Section 3 No DTCs Present Index chart for further information.
- 10095995Some 2010-2016 epas equipped vehicles may exhibit steering related noises. The workshop manual (wsm) diagnostic procedures have been updated in section 211-02. When diagnosing and repairing epas steering noises use the updated procedures.
- 10095184Replacing the original equipment sync/navigation system with either an aftermarket sync/navigation kit or modifying original sync/navigation parts to provide additional features IS not recommended nor supported on any ford, mercury or lincoln vehicle. Only approved genuine ford accessories or originally installed systems are supported and certified to function correctly with other vehicle systems. If you suspect a system has been modified, the following resources can be used to verify original equipment: monroney label (window sticker), professional technician society (pts) oasis tab select sync or hvbom. For genuine ford accessories use: pts workshop tab select dealer installed accessory or accessory installation.
- 10091151Some 2008-2017 ford/mercury/lincoln vehicles equipped with sync may generate a vhr that identifies a concern with the brakes and suspension category indicating service IS required due to a brake system warning lamp being illuminated. If the park brake was applied when the vhr was gathering data from the major vehicle systems, the brakes and suspension message will be reported as the vhr looks for any warning lamps illuminated in the instrument cluster. Rerun the vhr with the engine on and vehicle in park, and ensure the park brake IS disengaged. If the sync vhr IS still reporting a concern to the customers sync owners account, refer to the appropriate workshop manual section for diagnosis by dtc or symptom. Starting in 2015 not all sync equipped vehicles support vhr, refer to the owners manual for vhr operation.
- 10091138Certain 2011-2012 model year fusion vehicles equipped with 2.5L or 3.0L engines - powertrain control module reprogramming and canister purge valve inspection
- 10090681Some 2008-2017 ford/mercury/lincoln vehicles equipped with sync may generate a vhr that identifies a concern with the brakes and suspension category indicating service IS required due to a brake system warning lamp being illuminated. If the park brake was applied when the vhr was gathering data from the major vehicle systems, the brakes and suspension message will be reported as the vhr looks for any warning lamps illuminated in the instrument cluster. Rerun the vhr with the engine on and vehicle in park, and ensure the park brake IS disengaged. If the sync vhr IS still reporting a concern to the customers sync owners account, refer to the appropriate workshop manual section for diagnosis by dtc or symptom. Starting in 2015 not all sync equipped vehicles support vhr, refer to the owners manual for vhr operation.
- 10090508Some 2010-2012 fusion hybrid, milan hybrid and MKZ hybrid vehicles may exhibit an illuminated malfunction indicator lamp (mil) with diagnostic trouble codes (dtcs) p0030 and/or p0130. Follow the service procedure steps to correct the condition.
- 100752736F35 TRANSMISSION - FLUID LEAK AT LEFT SIDE HALFSHAFT SEAL BUILT ON OR BEFORE 10/14/2013 ISSUE Some 2009-2014 Escape, 2009-2011 Mariner, 2010-2014 Fusion, 2010-2011 Milan, 2012-2014 Edge/Explorer, and 2013-2014 Taurus/MKT/MKZ vehicles built on or before 10/14/2013 and equipped with a 6F35 automatic transmission may exhibit a fluid leak from the left hand (LH) transmission halfshaft seal due to wear on the transmission case bushing.
- 10058463Lincoln/ford: some vehicles will experience, in hot extreme ambient temperatures, a stop safely now or a malfunction indicator lamp (mil) illuminated in present of battery energy control module (becm) dtc p0a7e and becm needs replaced, and reprogram. Model 2010-12 fusion, milan, MKZ.
- 10058067Ford 2009-2014 escape, 2010-2014 fusion, 2012-2014 edge, explorer, 2013-2014 taurus: lincoln 2013-2014 mkt,mkz: mercury 2009- 2011 mariner, 2010-2011 milan. Some vehicles equipped with 6F35 automatic transmission may exhibit a fluid leak from the left hand transmission halfshaft seal due to wear on the transmission case bushing.
- 10057834Ford: no service action IS recommended for this condition. Please use at your discretion. Various 2010-2015 vehicles may experience a turbulence noise, similar to an helicopter noise, at highway speeds when the rear door window(s) or sunroof are open.
- 10057723Ford: a job aid was developed and now available for the ptu internal or external fluid leakage for all wheel drive vehicles.
- 10056711Ford/lincoln: there IS an extended warranty coverage for the loss of ABS speed signal related communication that disable obdii system monitors for pcm reprogramming. Model 2011-14 f-super duty, escape, taurus, fusion, MKT, MKZ.
- 10056184Lincoln/ford: in powertrain control module (pcm), that allows anti lock brake system (ABS) and output shaft speed sensor (oss) signal faults, a software error has occur and disabled on board diagnostic (obd) monitors with no illumination of malfunction indicator lamp (mil). Model 2011-2014 f-super duty, escape, taurus,fusion, MKT, MKZ.
- 10056183Ford: the throttle body internal motor contacts may be contaminated, resulting in an electrical, intermittent, connectivity, causing malfunction indicator lamp (mil) or wrench light to be illuminated. Model 2009-2012 fusion, milan, escape, mariner. Updated 11/18/14.
- 10056026Lincoln/ford: steering system senses, half front lower control arms/rearward IS experiencing a higher friction condition and causing the instrument cluster stability/traction to illuminate. Model 2011-2012 fusion, MKZ.
- 10055321Mercury/ford: on some vehicles, there IS a fluid leakage, coming from left hand (lh) halfshaft seal of the automatic transmission and a service kit IS available now, for repair. Model 2009-2012 escape, mariner, fusion, milan.
- 10054926Ford: throttle body will develop contamination on internal motor contacts resulting in an intermittent electrical connectivity and malfunction indicator lamp (mil) or wrench light will illuminate. Model 2009-2013 fusion, milan, escape, mariner. Updated 5/7/14.
- 10054575Ford: on the left hand half shaft seal, there IS a fluid leak from the transmission because of wear on case bushing. Model 2009-2012 escape, 2009-2011 mariner, 2010-2012 fusion, 2010-2011 milan.
- 10053656Ford: due to an intermittent loss of rpm or lack of acceleration, in some vehicles, with illuminated wrench light, diagnostic trouble codes (dtcs) p2111, p2112 may or may not be stored in powertrain control module (pcm). Models 2009-12 escape, mariner, fusion, milan.
- 10053408Ford: on various vehicles with my touch,after any apim programming, replacement or disconnect from front display interface module (fdim), touchscreen calibration must be performed. Model years 2011-2013. No models listed.
- 10052191Ford/lincoln/mercury: some vehicles may experience an illuminated mil or safety stop now message, or a no start condition or possible misfire or roughness at idling through 2000rpm or a lack of acceleration. Models 2009-12 escape, 2009-11 mariner, milan, 2010-12 fusion, 2011-14 mustangs, 2013 c-max, fusion, MKZ hybrid.
- 10044899Ford/lincoln: a diagnostic trouble code (dtc) p0a0a (high voltage system interlock circuit) shows when certain vehicles experience red triangle on/stop safely now message and/or a condition of no start.
- 10044230Ford/mercury/lincoln: some vehicles exhibit a cold weather phenomenon where fluid has expelled out of vent on rear drive units (rdu) and fluid, on occasion, would burp out.
- 10043648Ford: the variable camshaft timing vct) solenoid movement may be temporarily restricted due to debris in engine oil that IS causing diagnostic trouble codes (dtcs).
- 10043325Ford/mercury/lincoln: some model year vehicles may exhibit a message with a red triangle on and stop safely now, and/or have a diagnostic trouble code, no start condition.
- 10042506Mercury/lincoln/ford: the red brake lamp will illuminate with no change in brake pedal feel.
Every Ford Fusion model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.