2018 Ford Fusion
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Vehicles › Ford › Fusion › 2018
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
These records cover every 2018 Ford Fusion. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
2 recalls name the 2018 Ford Fusion. Newest first.
Ford Motor Company (Ford) is recalling certain 2013-2018 Fusion and Lincoln MKZ vehicles. The front brake hoses may rupture and leak brake fluid.
A brake fluid leak will increase brake pedal travel and extend the distance needed to stop the vehicle, increasing the risk of a crash.
Dealers will replace the front brake hoses, free of charge. Owner notification letters were mailed June 27, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S12.
Ford Motor Company (Ford) is recalling certain 2014-2018 Lincoln MKZ and Ford Fusion vehicles. The steering wheel retaining bolt may loosen allowing the steering wheel to detach while driving.
A steering wheel detachment can cause a loss of steering control, increasing the risk of a crash.
Ford will notify owners, and dealers will replace the steering wheel bolt with a longer bolt, free of charge. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S08.
The contact owns a 2018 Ford Fusion. The contact stated that there was an abnormal sound coming from the rear of the vehicle. In addition, the engine made a bubbling sound after turning off the vehicle. The check engine warning light was illuminated. The vehicle was taken to an independent mechanic, where an engine misfire was diagnosed, and a fuel odor was detected. The mechanic determined that the engine had failed and needed to be replaced. The failure mileage was approximately 138,000.
My daughter was driving getting on the highway, went to accelerate and the car would no longer accelerate. AAMCO stated the internal pressure pump is failing and the transmission is losing pressure.
My 2018 Ford Fusion suffered a sudden and complete engine failure caused by internal coolant intrusion — coolant leaking into the cylinders and destroying the engine. Pep Boys diagnosed that the failure developed internally over time and could not have been avoided by the owner. This is a known Ford factory defect in the 2.0L EcoBoost engine, documented in Ford's own publications (SSM 47204, SSM 47462, TSB 19-2346, TSB 22-2229), all of which cover the 2018 Fusion. The root cause is Ford's open-deck engine-block design, which allows coolant intrusion and cracking between cylinders. Ford corrected the design in 2019 production. A federal class action (Nelson et al. v. Ford, E.D. California) and NHTSA defect petition DP26008 concern this same defect. The sudden loss of engine power created an unsafe driving condition. My warranty claim was denied based on a 'blown head gasket' finding, which is the symptom of the factory defect, not the cause.
Capital Ford of Wilmington diagnosed my vehicle with coolant intrusion into cylinder 2, accompanied by diagnostic trouble codes P0302 and P0316, after check engine light came on. I have been advised that the vehicle requires a complete engine replacement, with an estimated cost of $13,180.89. The vehicle has experienced sputtering and hesitation, creating concern that it could lose power or stall. These symptoms are concerning. After researching this issue, I have learned that coolant intrusion is a documented problem associated with certain Ford vehicles equipped with the 1.5L EcoBoost engine produced during the 2017–2019 period. Ford has addressed this issue through Technical Service Bulletins and Customer Satisfaction Program 21N12. I contacted Ford and was told that my VIN is not covered under the Customer Satisfaction Program. When asked why mine was not covered but other were , Ford stated that even if it is the same issue that is being recalled if my VIN is not flagged it will not be covered for any recall or assistance.I called Ford when I first purchase vehicle and asked about this recall and was told if I didn't have anything wrong with my car and no engine lights that my car was fine and to bring it in if I have any issues.
My 2018 Ford Fusion Titanium FWD (VIN: [XXX]) suffered a catastrophic engine failure while driving, causing sudden vehicle overheating, severe engine misfires, and a dangerous loss of power on the roadway.A certified Ford dealership inspection (Invoice #XXX) confirmed that the vehicle has a textbook manufacturing flaw known as EcoBoost coolant intrusion. A pressure test showed an immediate 5 PSI drop within 10 minutes, and a borescope confirmed that engine coolant is actively leaking across the block interface and pooling directly inside the engine cylinders (cylinders 2 and 3).This is a known, widespread structural engineering defect in Ford's block casting that creates a severe, sudden safety hazard by causing vehicle stalling and clouding exhaust smoke while operating at highway speeds. The vehicle is now entirely unsafe to drive and requires a full engine block replacement. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
My engine coolant keeps on overheating, I’ve tried changing the antifreeze tank out for a brand new one and it helped the issue for a while but I have to relieve the pressure myself which is a hazard. I’ve had to change the coolant in the tank more than 5 times and it just seems like it’s leaking somewhere other than going into the engine to cool it. When I go out roundabouts off a highway the engine overheats and makes the car go into a safe mode where it won’t go and I have to stop on the side of the road. When I’m driving with my heat on the heat will go cold when I slow down. If I’m not going over 3x1,000 RPMs it will go cold and fluctuate. This has been going on for months now.
Got home and vehicle would not go into park. I can get it to drive but its only low range. Upon having it inspected, it was discovered the shift cable bushing at the transmission lever was missing.
The contact owns a 2018 Ford Fusion. The contact stated that the check engine warning light was illuminated. Additionally, there was white smoke coming from the exhaust pipes. The vehicle was taken to an independent mechanic several times, and the contact was informed that the engine was consuming antifreeze. The ignition coils and spark plugs were replaced; however, the failure persisted. The mechanic associated the failure with the engine. The vehicle was taken to a dealer, where it was diagnosed and determined that the short block was warped and that the engine needed to be replaced. The vehicle was scheduled to be repaired. The contact researched the failure and stated that it was a known issue that the manufacturer had failed to correct. The manufacturer was notified of the failure via telephone; however, no assistance was provided. The failure mileage was approximately 122,000.
We have coolant intrusion in cylinder 2 of our engine. This can cause highway failure of engine cuts out, car runs rough and it can become a fire hazard. We paid for a diagnostics through a ford dealer. Who we uses all the time for our warranty needs. We noticed car was starting to run rough and check engine light came on 8/5/26
my 2018 ford fusion has catastrophic engine failure. Engine stuttering and misfires with check engine light. Low coolant levels with no visible puddles under the car. Engine overheating, could possibly catch fire. Car recently had a tuneup was told no issues at the time. Failure mileage at 109,000.
The 1.5L EcoBoost motor has coolant intrusion problem on cylinder 3. The 1.5L EcoBoost motor sputters while driving causing the engine to be sluggish and not get up to speed when turning and might cause an accident on the highway due to the motor failing due to coolant intrusion design flaw in Ford Motor. Yes, Ford dealership confirmed the coolant intrusion problem on cylinder 3 and check engine light keeps coming on and off. Yes, the Ford dealership inspected the 1.5L engine in the vehicle and ran test to confirm the coolant intrusion problem on cylinder 3. There was no other warning lamps or symptoms prior to the failure/degrade of engine
On August 10, 2026, I was driving my 2018 Ford Fusion at approximately 40 mph under normal driving conditions when, without warning, the hood unexpectedly released and flew completely backward into the windshield. The hood had been closed prior to driving and there was no warning before the failure. The hood struck the windshield with significant force, shattering it, immediately blocking my forward visibility, and sending broken glass into the passenger compartment and onto me. Because I suddenly could not see the roadway, I lost control and the vehicle left the road. Fortunately, no other vehicles or pedestrians were involved and I did not require medical treatment. This was not a hood that simply became loose or partially opened. The hood fully opened and struck the windshield. Based on what occurred, it appears the primary hood retention/latch and the secondary safety retention mechanism both failed to prevent the hood from fully opening. The exact mechanical cause requires inspection. The impact caused extensive damage to the hood and windshield and tore/deformed metal around the windshield/A-pillar/roof area. An independent eyewitness across the street personally witnessed the incident occur in real time, and I have photographs documenting the aftermath. The vehicle has approximately 156,000 miles, was in good operating condition, and remains unrepaired and unaltered following the incident so the hood latch, secondary safety catch, striker, hinges and related components can be inspected. Ford was notified immediately and opened case CXH-08862363-V8C8X7, which Ford advised was escalated to its Office of General Counsel. I am reporting this because this apparent hood-retention safety failure created an extremely dangerous situation. Had this occurred at highway speed, at a higher speed, in heavy traffic, or near pedestrians, the consequences could have been catastrophic.
Coolant leaking into the engine.
There is a recall for the transmission cable bushings for years 2013-2106. The recall came out in 2022. This same bushing is used in the 2018 ford fusion model that was not fixed. The bushing on my vehicle which is a 2018 complete failed while I was driving and left me immobile until I searched for a fix and found the bushing completely gone. Ford Escape: Model years 2013–2019, Ford C-Max: Model years 2013–2018; Ford Fusion: Model years 2013–2016; Ford Transit Connect: Model years 2013–2021; Ford Edge: Model years 2015–2018. Each model besides the fusion went past the 2018 model in which the 2018 fusion should be apart of
Transmission/cracked flexplate started approximately 12 months prior with vibrations getting progressively worse, complete failure needing replacement along with shift cable bushing causes vehicle to select wrong gear position when another is commanded by driver. Shrapnel from case or components could be expelled during flexplate/converter failure. Incorrect gear selection could lead to potential injury or damage from improper gear selection.
See attached document for complaint.
There is a known coolant intrusion into the engine that caused the engine to suddenly only go to a certain speed while on the freeway. It could have caused an accident on the freeway by suddenly going at such a slow speed. It is now found out that the problem is known by Ford and is part of a technical service bulletin, but no recall has been issued on this known problem. The TSB associated are 19-2139, 19-2375, 20-2100. By not making this a recall, Ford is knowingly putting lives at risk with potential sudden loss of speed in these engines. It is lucky this was late at night when not many cars were on the road.
Vehicle would not recognize car being in Park. Displayed warning messages: Shift Sys Fault Confirm Park Brake Before Exiting Vehicle. Transmission Not In Park
The electric power steering went out and locked my steering cannot figure out why and traction control light on and service light
Coolant Intrusion issue with the 1.5-litre EcoBoost. Short block was replaced by Ford Dealer then engine failed again after only 7,000-miles. Required complete new engine installed at my expense, $12,185.28.
I own a 2018 Ford Fusion EcoBoost. I purchase it in 2021 with 11K miles on it. Today it has 34K miles and the engine block developed a crack. Through my research and my Ford dealer, I've discovered this issue is a known issue with the 1.5 and 2.5 litre engines in the Fusion. My repair bill would be just about 7K.
My engine failed months ago, and my car has been sitting immobile ever since. My car stuttered while driving, and then turned off. As I started it back up and continued driving down the road, it was shaking very badly. I called my brother to come drive my car home and he pulled clear fluid out of my oil tank. The exact issue described has been put out in the new ford recall under code 26S43.
Ford's double-capped acorn lug nuts experienced outer cap expansion/separation during an emergency roadside tire change. A defective design known by Ford. Rendering the supplied tire iron and a separately purchased multisize tire iron ineffective at removing the lugs. The failure left the vehicle immobile on the side of a i75 in SWFL in the summer heat of June 2026. Present in the vehicle were the owner, spouse, and a [XXX] infant. They were stranded approximately 34 miles from home for nearly 3 hours, an extended period for a XXX, who quickly became visibly distressed. Standard FDOT Road Ranger assistance was unavailable, and towing services had estimated wait times exceeding 2 hours. The driver was unable to resolve the situation through any reasonable self-help measure due to the defective lugs, despite having successfully changed tires on the same vehicle previously using the same factory equipment. The defect was verbally identified during the incident by a responding AAA roadside technician. They recognized the defect as consistent with a known issue affecting Ford vehicles. No formal inspection by Ford Motor Company, law enforcement, or insurance representatives has taken place but will be pursued by the owner and available for inspection is requested. No warning lamps, dashboard alerts, or observable symptoms were present that would have indicated a lug nut defect to the owner. It only became apparent at the moment an emergency tire change was required. This is consistent with prior reported cases and litigation involving Ford. The owner was never informed of this defect during the vehicle purchase, service history, or extended warranty agreement. If known road side assistance would have been contacted, instead of self servicing the tire change which was rendered useless by a defect Ford has been aware of. Resulting in nearly 3 hours of preventable roadside exposure, emotional distress, and the endangerment of a [XXX] infant. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C.
Per mechanic, head gasket has failed due to known issue with 1.5L Ecoboost engines. Coolant is leaking into the engine. White smoke in the exhaust indicating coolant leak. Vehicle is currently availble for inspection upon request, but is destined to be sold. Driver safety as well as surrounding driver safety as risk should engine completely fail due to overheating while driving, potentially causing an accident. There is currently a class action lawsuit in the works for this issue as many other have had it. At this time vehicle has only been inspected by our local mechanic. There were no warning lamps, messages or other symptons prior ot the issue. When the issue stated, there was a "waterfall" sound in the engine compartment, which caused us to take the vehicle to the mechanic for diagnoses.
I purchase this car on XXX Clinton Ford Dealership and engine need replacement Jan 2020 . I at that time did many replacement until the final diagnostic said engine replacement confirm by dealership Ford Dealership Fayetteville NC . The purge valve canister went out in 2022 and was replaced by Ed’sTire in Hope Mills Rd 11/19–11/22/2022 and now mechanic said it is in need of replacement again . Car problems started 2026 Feb and three pieces were replaced because the system was reading those code now to find out the purge valve canister needs replacement again. These hardship have cost me financial difficulties that a new car should never have had within 2 years . I believe no consumer should have to go through this.
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
On August 8, 2022, the Office of Defects Investigation (ODI) opened this investigation based on 50 Vehicle Owner Questionnaires (VOQs) alleging front brake jounce hose ruptures on model year (MY) 2013-2018 Ford Fusion and Lincoln MKZ vehicles. A ruptured front brake hose results in a brake fluid leak. As a result, the driver may experience an increase in pedal travel and a reduction in the rate of deceleration, increasing the risk of a crash. It should be noted that the subject vehicles identified fell outside the scope of NHTSA Safety Recall 20V-469, which addressed front brake hoses rupturing on certain MY 2015-2018 Ford Edge and 2016-2018 Lincoln MKX vehicles. The result causes a brake fluid leak, lengthening the distance needing to stop the vehicle, increasing the risk of a crash.On March 10, 2023, Ford Motor Company (Ford) submitted to NHTSA Safety Recall 23V-162 (Ford Recall 23S12) to address front brake jounce hoses that may rupture. Ford found the rupture occurs from a localized failure of the internal reinforcement braid due to cyclic fatigue through tensile/bending and torsional inputs during suspension and steering articulations. The supplier for the front brake jounce hoses is Hitachi. This recall affects the subject vehicles equipped with non-hybrid engines and the suspect front brake jounce hoses (a total of 1,280,726 vehicles). The recall covers subject vehicles built from February 3, 2012 to July 19, 2017 when the suspect hoses were used in vehicle production. The remedy is for dealerships to replace both front brake jounce hoses with new hoses that have a revised braid material at no cost. The vehicles equipped with hybrid engines are excluded from the recall because the internal hose pressure is much lower due to the regenerative braking provided by the hybrid brake system. No failures of brake hoses on hybrid vehicles have been reported to ODI or Ford.Ford's actions address ODIs concerns at this time. Hybrid vehicles will be monitored for related failures. The agency reserves the right to take further action if warranted by new circumstances.The 103 ODI numbers cited above can be viewed at NHTSA.gov under the following ID numbers:11511014, 11510867, 11510318, 11509030, 11505993, 11504989, 11504400, 11502147, 11502082, 11501820, 11501283, 11498439, 11498296, 11496842, 11496335, 11494931, 11494851, 11494252, 11493001, 11492084, 11492070, 11491444, 11491274, 11488858, 11488027, 11487627, 11487416, 11487233, 11486150, 11484924, 11484526, 11484080, 11483948, 11483926, 11483739, 11483723, 11482773, 11482690, 11481077, 11480788, 11480294, 11480052, 11479338, 11479334, 11479252, 11479247, 11479187, 11479094, 11479048, 11478985, 11478953, 11478729, 11478216, 11476892, 11476282, 11470558, 11468994, 11467109, 11466294, 11462746, 11461217, 11456065, 11455367, 11444848, 11436419, 11436376, 11430685, 11428329, 11425083, 11421026, 11420738, 11420735, 11420298, 11418197, 11403926, 11397549, 11366991, 11366757, 11361016, 11359968, 11354569, 11352165, 11350344, 11348799, 11343929, 11343205, 11331947, 11329020, 11319596, 11310529, 11292271, 11288455, 11254787, 11253479, 11253244, 11234622, 11230669, 11230050, 11228240, 11221111, 11143630, 11129392 and 11120228.
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.