2013 Ford Fusion
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Ford › Fusion › 2013
These records cover every 2013 Ford Fusion. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
19 recalls name the 2013 Ford Fusion. Newest first.
Ford Motor Company (Ford) is recalling certain 2015-2018 Focus and 2013-2016 Fusion vehicles previously repaired incorrectly under recall numbers 18V169 and 18V845. The clutch may fracture, resulting in damage to the transmission assembly and possibly a transmission fluid leak.
Risk and remedy
Risk
A transmission fluid leak in the presence of an ignition source such as hot engine or exhaust components can increase the risk of a fire.
Remedy
Dealers will update the software, free of charge. Additionally, dealers will inspect Focus vehicles and replace the clutch assembly as necessary, free of charge. Owner notification letters were October 16, 2026. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 26S43. Vehicle Identification Numbers (VINs) involved in this recall will become searchable on NHTSA.gov on July 6,2026.
Ford Motor Company (Ford) is recalling certain 2013-2018 Fusion and Lincoln MKZ vehicles. The front brake hoses may rupture and leak brake fluid.
Risk and remedy
Risk
A brake fluid leak will increase brake pedal travel and extend the distance needed to stop the vehicle, increasing the risk of a crash.
Remedy
Dealers will replace the front brake hoses, free of charge. Owner notification letters were mailed June 27, 2023. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 23S12.
Ford Motor Company (Ford) is recalling certain 2013-2019 Escape, 2013-2018 C-Max, 2013-2016 Fusion, 2013-2021 Transit Connect, and 2015-2018 Edge vehicles. The bushing that attaches the shifter cable to the transmission may degrade or detach.
Risk and remedy
Risk
A damaged or missing bushing may prevent the vehicle from shifting into the intended gear, and cause the vehicle to move in an unexpected direction. Additionally, the vehicle may roll after the driver selects the 'Park' position. Either scenario increases the risk of a crash or injury.
Remedy
Dealers will replace the under hood shift bushing and add a protective cap over the shift cable bushing, free of charge. Interim owner notification letters, informing owners of the safety risk, were mailed July 1, 2022. Remedy parts are expected to be available in 4th Quarter 2022. Owner notification letters were mailed October 27, 2022. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 22S43.
Ford Motor Company (Ford) is recalling certain 2011-2014 Fiesta, 2013-2014 Fusion, 2015 Mustang, 2013-2015 Escape and C-Max, 2012-2015 Focus, 2014-2016 Transit Connect, 2013-2014 Lincoln MKZ, and 2015 MKC vehicles. These vehicles were previously recalled and repaired under recalls 15V-246, 16V-643 or 17V-210, however the repair may not have been completed…
Risk and remedy
Risk
A door that is not securely latched could open while the vehicle is in motion, increasing the risk of injury to a vehicle occupant.
Remedy
Ford will notify owners, and dealers will inspect the latch date codes to confirm if the repair was done correctly, and replace the side door latches if necessary, free of charge. Owners will also have the option to inspect their own vehicle's door latches and enter the date codes into a website to determine if the latches are correct. Owner notification letters were mailed on July 27, 2020. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 20S30.
Ford Motor Company (Ford) is recalling certain 2013-2016 Ford Fusion and Lincoln MKZ, 2015-2016 Ford Edge, and 2016 Lincoln MKX vehicles originally sold, or currently registered in Connecticut, Delaware, the District of Columbia, Illinois, Indiana, Iowa, Maine, Maryland, Massachusetts, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York…
Risk and remedy
Risk
If the bolts corrode, the steering gear motor may detach from the gear housing resulting in a loss of power steering assist, requiring a greater steering effort, especially at lower speeds, and increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the steering gear motor bolts and apply a wax sealer. If any of the steering gear motor attachment bolts are broken or missing, a new steering gear will be installed in the vehicle. These repairs will be performed free of charge. The recall began October 18, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S26.
Ford Motor Company (Ford) is recalling certain 2013-2016 Fusion vehicles equipped with 2.5 liter engines. The bushing that attaches the transmission shifter cable to the transmission may degrade over time and cause the bushing to detach from the transmission. The condition could allow the driver to move the shift lever to Park and remove the ignition key…
Risk and remedy
Risk
If the vehicle is exited without the transmission being in Park and without the parking brake being applied, the vehicle may unexpectedly move, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the shifter cable bushing, free of charge. The recall began September 10, 2019. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 19S16. Note: Owners are directed to use the parking brake until the recall remedy repairs can be made. This recall is an expansion of 18V471.
Ford Motor Company (Ford) is recalling certain 2013-2014 Ford Escape, and 2013-2016 Ford Fusion vehicles, equipped with six-speed automatic transmissions. The bushing that attaches the transmission shifter cable to the transmission may degrade over time and cause the bushing to detach from the transmission. The condition could allow the driver to move the…
Risk and remedy
Risk
If the vehicle is exited without the transmission being in Park and without the parking brake being applied, the vehicle may unexpectedly move, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the shifter cable bushing, free of charge. The recall began September 20, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S20. Note: Owners are directed to use the parking brake until the recall remedy repairs can be made.
Ford Motor Company (Ford) is recalling certain 2013-2014 Ford Fusion vehicles equipped with a 1.6L GTDI engine and 6-speed manual transmission and 2015-2016 Ford Focus vehicles equipped with a 1.0L GTDI engine and 6-speed manual transmission. Also included are four 2017 Ford Focus vehicles that had clutch replacements with potentially affected parts. The…
Risk and remedy
Risk
A transmission fluid leak in the presence of an ignition source such as hot engine or exhaust components can increase the risk of a fire.
Remedy
Ford will notify owners, and dealers will update the Focus vehicles with software that detects and prevents prolonged clutch slip, and will replace the clutch, as necessary, free of charge. Owners of Fusion vehicles will have their clutch assembly replaced free of charge. The recall began August 3, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 18S07.
Ford Motor Company (Ford) is recalling certain 2014 Escape, 2014-2015 Fiesta ST, 2013-2014 Fusion and 2013-2015 Transit Connect vehicles equipped with 1.6L GTDI engines. If the vehicle is started and driven with an insufficient level of coolant within the engine cooling system, the engine cylinder head may overheat, crack and leak oil.
Risk and remedy
Risk
If the cylinder head cracks and leaks oil, the oil may contact a hot engine or exhaust component, increasing the risk of a fire.
Remedy
Ford will notify owners, and dealers will install a coolant level sensor and the supporting hardware and software, free of charge. Interim notices informing owners of the safety risk were mailed April 21, 2017. The recall began on January 5, 2018. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 17S09.
Ford Motor Company (Ford) is recalling certain 2014 Ford Fiesta, 2013-2014 Ford Fusion and 2013-2014 Lincoln MKZ vehicles. A component within the door latches may break making the doors difficult to latch and/or leading the driver or a passenger to believe a door is securely closed when, in fact, it is not.
Risk and remedy
Risk
A door that is not securely latched could open while the vehicle is in motion, increasing the risk of injury to a vehicle occupant.
Remedy
Ford will notify owners, and dealers will replace all four door latches, free of charge. The recall began May 1, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S16.
Ford Motor Company (Ford) is recalling certain model year 2013-2016 Ford Fusion vehicles manufactured November 2, 2012, to July 31, 2014, and 2013-2015 Lincoln MKZ vehicles manufactured November 14, 2012, to July 31, 2014. In the event of a crash, heat from the deployment of a seat belt pretensioner may cause a front seat belt anchor cable to fail.
Risk and remedy
Risk
If the driver or front passenger seatbelt cables cannot properly restrain the front seat occupants, they would be at an increased risk of injury.
Remedy
Ford will notify owners, and dealers will apply a protective coating to the seat belt cable, free of charge. The recall began May 16, 2017. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 16S42.
Ford Motor Company (Ford) is recalling certain model year 2013-2015 Ford Fusion and Lincoln MKZ vehicles manufactured February 3, 2012, to March 20, 2015, and 2015 Ford Edge vehicles manufactured February 26, 2015, to February 28, 2015, and originally sold, or currently registered in, Connecticut, Delaware, Illinois, Indiana, Iowa, Maine, Maryland…
Risk and remedy
Risk
If the bolts corrode, the steering gear motor may detach from the gear housing resulting in a loss of power steering assist. Loss of power steering assist would require a higher steering effort, especially at lower speeds, which may increase the risk of a crash.
Remedy
Ford will notify owners, and dealers will apply sealer and replace the steering gear motor bolts as required. If one or more of the steering gear motor attachment bolts are broken or missing, a new steering gear will be installed in the vehicle. These repairs will be performed free of charge. The recall began on June 24, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S14.
Ford Motor Company (Ford) notified the agency on April 23, 2015, that they are recalling certain model year 2013-2014 Ford Fusion and Lincoln MKZ vehicles manufactured July 1, 2012, to May 31, 2013, and 2012-2014 Fiesta vehicles manufactured February 1, 2012, to May 31, 2013. On April 30, 2015, Ford expanded the recall to cover an additional 119,567…
Risk and remedy
Risk
A door that is not securely latched could open while the vehicle is in motion, increasing the risk of injury to a vehicle occupant.
Remedy
Ford will notify owners, and dealers will replace all four door latches with an improved part, free of charge. Interim notifications were mailed to owners on June 5, 2015. The recall began on December 18, 2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 15S16.
Ford Motor Company (Ford) is recalling certain model year 2013-2014 Ford C-Max vehicles manufactured January 19, 2012, to November 21, 2013; Ford Fusion vehicles manufactured February 3, 2012, to August 24, 2013; Ford Escape vehicles manufactured October 5, 2011, to November 1, 2013; and Lincoln MKZ vehicles manufactured April 25, 2012, to September 30…
Risk and remedy
Risk
The short circuits could cause the frontal air bags, side curtain air bags and the seat belt pretensioners to not function as intended when needed, increasing the risk of occupant injury in the event of a crash.
Remedy
Ford will notify owners, and dealers will replace the RCM, free of charge. Parts are not currently available. The recall began on May 26,2015. Owners may contact Ford customer service at 1-866-436-7332. Ford's number for this recall is 14S21.
Ford Motor Company (Ford) is recalling certain model year 2013-2014 Ford Fusion and Lincoln MKZ vehicles manufactured August 15, 2012, through September 10, 2013, 2013-2014 Ford Escape vehicles manufactured June 5, 2012, through August 12, 2013, and 2013-2014 Ford C-Max vehicles manufactured from July 23, 2012, through May 28, 2013. The driver and…
Risk and remedy
Risk
The back of the subject seats may become loose or lean while driving and potentially increase the risk of injury in certain crashes.
Remedy
Ford will notify owners, and dealers will replace the seatback, free of charge. The recall began on May 30, 2014. Owners may contact Ford at 1-800-392-3673. Ford's number for this recall is 14C03.
Ford is recalling certain model year 2013 Explorer, Taurus, Flex, Fusion, Police Interceptor Sedan and Police Interceptor Utility vehicles; and certain model year 2013 Lincoln MKS, MKT, and MKZ vehicles. In the affected vehicles, the fuel delivery module may develop a crack, allowing fuel to leak.
Risk and remedy
Risk
A fuel leak in the presence of an ignition source may result in a fire.
Remedy
Ford will notify owners, and dealers will replace the fuel delivery module, free of charge. The recall began on July 20, 2013. Owners may contact Ford Motor Company Customer Relationship Center at 1-866-436-7332. Ford's recall campaign number is 13S04.
Ford is recalling certain model year 2013 Fusion vehicles manufactured April 19, 2013, through April 23, 2013. The steering gears may be missing an internal retaining clip. If the clip is missing, components inside the steering gear may become dislodged inside the gear assembly.
Risk and remedy
Risk
This could result in impaired steering, including the loss of steering control, increasing the risk of a crash.
Remedy
Ford will notify owners, and dealers will replace the steering gear, free of charge. The recall began on June 17, 2013. Ford's recall number is 13S06. Owners may contact the Ford customer relationship center at 1-866-436-7332.
This is an update to a recently announced recall. Ford is recalling certain model year 2013 Escape vehicles manufactured from October 5, 2011, through November 26, 2012, equipped with 1.6L engines, as well as certain model year 2013 Fusion vehicles manufactured from February 3, 2012, through November 29, 2012, equipped with 1.6L engines. Coolant system…
Risk and remedy
Risk
If flammable engine fluids come in contact with the vehicles hot exhaust system, a vehicle fire could occur.
Remedy
Ford will notify owners, and dealers will inspect the engine for coolant system leaks and reprogram the vehicles powertrain control module and instrument cluster with an updated calibration and overheat strategy software. There will be no charge to owners for this service. Owners were recently notified to contact dealers to arrange for alternative transportation as Ford developed a remedy. Owners will be shortly receiving notifications to contact Ford dealers to schedule the free remedy repair. Owners may contact Ford Motor Company Customer Relationship Center at 1-866-436-7332.
Ford is recalling certain model year 2013 Fusion vehicles, manufactured from February 3, 2012, through October 20, 2012, for failing to conform to the requirements of Federal Motor Vehicle Safety Standard (FMVSS) number 108, "Lamps, Reflective Devices, and Associated Equipment." The affected vehicles may not have had the low beam headlamp projector coating…
Risk and remedy
Risk
An improperly cured projector coating will become hazy through operation, over time, reducing the brightness of the low-beam lamp. This may decrease driver visibility and increase the risk of a vehicle crash.
Remedy
Ford will notify owners, and dealers will replace the headlamp assembly. The recall began on December 18, 2012. Owners may contact Ford Motor Company Customer Relationship Center at 1-866-436-7332.
Owner complaints
1,792 complaints63 involved a crash91 involved a fire54 injuries1 deaths
What owners report most
Latest complaints
- Engine · Power train
The contact owns a 2013 Ford Fusion. While driving at an undisclosed speed, the vehicle lost motive power. The failure had occurred over twenty-five times. The vehicle was able to be restarted three times, and on other occasions, the vehicle was towed by AAA to the residence. AAA informed the…
The contact owns a 2013 Ford Fusion. While driving at an undisclosed speed, the vehicle lost motive power. The failure had occurred over twenty-five times. The vehicle was able to be restarted three times, and on other occasions, the vehicle was towed by AAA to the residence. AAA informed the contact that the battery needed to be replaced. The contact had Walmart replace the battery and perform an oil change, during which an engine oil leak was found. An independent mobile mechanic then diagnosed the vehicle and determined that the transmission needed to be replaced. The vehicle was towed to a transmission specialist, who replaced the transmission, clutch filter seal, and piston, and performed a suspension alignment. The failure persisted. Another mobile mechanic replaced the alternator and performed electrical repairs. The failure recurred, and the vehicle was towed to the dealer; however, the cause of the failure could not be determined, and the contact was refunded the diagnostic test fee. The contact associated the failure with an unknown DTC and an unknown recall for a 2016 Ford Fusion.
- Engine
On October 16, 2017, we were driving this vehicle on the interstate when we noticed smoke in the rearview mirror. We pulled over right away, and within seconds of getting out, the car was engulfed in flames. It burned so fast that by the time firefighters arrived, about seven minutes later, there…
On October 16, 2017, we were driving this vehicle on the interstate when we noticed smoke in the rearview mirror. We pulled over right away, and within seconds of getting out, the car was engulfed in flames. It burned so fast that by the time firefighters arrived, about seven minutes later, there was nothing left of it. Neither of us was physically injured, but we got out with almost no time to spare. The fire department responded and a report was filed. The car was equipped with the 1.6L GTDI EcoBoost engine and falls within the population of Safety Recall 17S09 / NHTSA 17V-209, which covers localized cylinder head overheating and cracking that can cause a pressurized oil leak and an engine compartment fire. At the time our car burned, the interim recall notice had gone out but no remedy parts were available; the actual recall repair did not begin until January 5, 2018. Ford later contacted us and offered a small settlement, conditioned on signing away any right to bring future claims. We declined.
- Unknown or other
Car has element B direct clutch issue. This is recalled on other 2013 fusions but not on my specific car.
- Steering
My power steering failed. There is no pump it's electronic so I can get it replaced without taking it to a dealer. There were 2 recalls for the Power Steering for this make and model, but my VIN number does not show up in the search. You need to expand the recall. My Power steering failed
- Engine · Service brakes, hydraulic
The contact owns a 2013 Ford Fusion. The contact stated that while stopped in a drive-thru, there was an abnormal hissing sound coming from the brake pedal. There was no warning light illuminated. The brake pedal was depressed to the floorboard, and excessive force was needed to stop the vehicle.…
The contact owns a 2013 Ford Fusion. The contact stated that while stopped in a drive-thru, there was an abnormal hissing sound coming from the brake pedal. There was no warning light illuminated. The brake pedal was depressed to the floorboard, and excessive force was needed to stop the vehicle. The vehicle was driven to the residence. The contact stated that after restarting the vehicle, the "Check Engine" warning light was illuminated and the "Brake Level Low" message was displayed. The contact associated the failure with NHTSA Campaign Number: 23V162000 (Service Brakes, Hydraulic); but was unable to secure an appointment with two local dealers for a timely repair. The contact requested authorization to have the vehicle repaired by an independent mechanic with reimbursement, but the manufacturer declined the request. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer denied a request for a loaner vehicle. The contact was provided a case number. The vehicle was not repaired. The failure mileage was 172,318.
- Service brakes, hydraulic · Service brakes, hydraulic › Foundation components › Disc › Pads
The contact owns a 2013 Ford Fusion. The contact stated that while her son was driving at an undisclosed speed, the brake pedal was depressed; however, the brakes became inoperable. The brake pedal was depressed all the way to the floorboard for the vehicle to stop. There was no warning lights…
The contact owns a 2013 Ford Fusion. The contact stated that while her son was driving at an undisclosed speed, the brake pedal was depressed; however, the brakes became inoperable. The brake pedal was depressed all the way to the floorboard for the vehicle to stop. There was no warning lights illuminated. The contact's husband became aware that brake fluid was leaking from the vehicle after the contact and her son returned to the residence. The contact stated that the vehicle had been recently serviced on June 8, 2026, and there was no mention of an issue with the braking system. The dealer was contacted and stated that the brake pads were extremely worn, and the brake lines needed to be replaced along with the brake master cylinder. The vehicle was repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 122,385.
- Engine
While driving my Ford Fusion, I experienced a serious transmission-related loss of propulsion. Leading up to the failure, I noticed that the engine RPM would fluctuate considerably and the vehicle appeared to have difficulty maintaining engagement in a gear. On the day of the failure, I was…
While driving my Ford Fusion, I experienced a serious transmission-related loss of propulsion. Leading up to the failure, I noticed that the engine RPM would fluctuate considerably and the vehicle appeared to have difficulty maintaining engagement in a gear. On the day of the failure, I was traveling approximately 50 mph when the vehicle suddenly stopped responding normally to the accelerator. When I pressed the accelerator, the engine RPM increased significantly, but the vehicle would not accelerate accordingly. It appeared that engine power was no longer being properly transferred through the transmission to the wheels. I was only able to get the vehicle home in a severely reduced-performance/limp condition. The vehicle was also leaking fluid associated with this failure. I subsequently received an NHTSA recall alert for Recall 26V376, “Transmission Clutch May Fracture and Leak Fluid,” which includes certain Ford Fusion model years. The failure I experienced appears very similar to the condition described in this recall, particularly the loss of propulsion accompanied by increased engine RPM and the presence of a fluid leak. However, when I checked my VIN, I was informed that my vehicle is not currently included in the recall. I am submitting this safety complaint because my vehicle experienced what appears to be a substantially similar failure, including loss of propulsion while traveling approximately 50 mph and subsequent fluid leakage. I am requesting that NHTSA review my vehicle's failure in connection with Recall 26V376 and determine whether the affected vehicle population may need to be expanded.
- Engine
Vehicle blew upper radiator hose due to blown head gasket. Vehicle has trouble starting and releases grey blue smoke via exhaust at all times. Has not been looked at by anyone other than an odot employee and myself. Hose was replaced but issues continue. Vehicle engine light came on after low…
Vehicle blew upper radiator hose due to blown head gasket. Vehicle has trouble starting and releases grey blue smoke via exhaust at all times. Has not been looked at by anyone other than an odot employee and myself. Hose was replaced but issues continue. Vehicle engine light came on after low coolant warning and overheating. Vehicle is available for inspection. Google states this is an extremely common occurrence with this particular year and model of vehicle.
- Engine and engine cooling
The contact owns a 2013 Ford Fusion. The contact stated that while driving at an undisclosed speed, the low coolant warning light illuminated, and the vehicle stalled. The failure was a recurring failure. The contact associated the failure with NHTSA Campaign Number: 12V551000 (Engine and Engine…
The contact owns a 2013 Ford Fusion. The contact stated that while driving at an undisclosed speed, the low coolant warning light illuminated, and the vehicle stalled. The failure was a recurring failure. The contact associated the failure with NHTSA Campaign Number: 12V551000 (Engine and Engine Cooling); however, the VIN was not included. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was unknown.
- Electrical system · Engine · Fuel/propulsion system
My 2013 Ford Fusion equipped with the 1.6L EcoBoost engine started blowing thick white smoke (Burning Coolant) while I was driving on the freeway. Engine coolant was leaking and my card died right there, that had blown the head gasket. I received no warning, no message. This was an incredibly…
My 2013 Ford Fusion equipped with the 1.6L EcoBoost engine started blowing thick white smoke (Burning Coolant) while I was driving on the freeway. Engine coolant was leaking and my card died right there, that had blown the head gasket. I received no warning, no message. This was an incredibly dangerous situation because I was on the freeway and was forced to stop immediately. Ford Motor Company has refused to include my vehicle’s VIN in the applicable recall programs despite my vehicle experiencing the same issues described in NHTSA recalls 12V551000 (Ford Campaign 12S41) and 17V209 (Ford Campaign 17S09) The recalls identify issues involving coolant loss, overheating, insufficient warning of coolant loss, potential engine damage, cylinder head damage, and the risk of engine compartment fire. My vehicle exhibited these same symptoms and consequences which can be confirmed by the autobody shop where it was evaluated. The purpose of these recalls was to address a known safety concern involving the 1.6L EcoBoost engine cooling system. Despite this, when I contacted Ford and requested assistance and asked that my VIN be added to the recall population, Ford denied my request and stated that my vehicle was not included. I believe this decision fails to address the fact that my vehicle experienced the same defect and safety risk identified in the recall documents. The safety issue is not limited to the VINs currently listed in the recall population; rather, my vehicle demonstrates the same failure mode that prompted the recalls. My concern is that vehicles equipped with the same engine and experiencing the same defect may continue to pose a safety risk to drivers and passengers. A coolant loss event and overheating condition can result in significant engine damage, sudden loss of vehicle operation, costly repairs, and the potential for an engine compartment fire. respectfully request that this matter be reviewed and that Ford be required to re-evaluate their decision.
- Power train
Vehicle transmission shifts harshly from 2nd to 3rd gear and occasionally from 1st to 2nd gear I believe it’s a safety issue because it causes slower acceleration and jerkiness which causes vehicle instability The problem has been reproduced by the dealer but no solution was found yet The transmission hasn’t been fully inspected yet There are no warning lamps or codes present for this issue yet
- Engine · Fuel/propulsion system · Power train
Vehicle makes strange sounds from the fuel fill inlet and proceeds to stall shortly after while driving and most of the times fails to restart based on my own research it looks like purge valve issues My safety was put at risk by almost being rear ended multiple times from stalling on the…
Vehicle makes strange sounds from the fuel fill inlet and proceeds to stall shortly after while driving and most of the times fails to restart based on my own research it looks like purge valve issues My safety was put at risk by almost being rear ended multiple times from stalling on the expressway and red lights The problem has not been reproduced yet by the dealer it will be looked at on 07/15/26 The component has not been inspected yet The check engine light illuminated when the issue started
- Engine
Engine lacks substantial power and has almost cause multiple collisions. Check engine light is on for a P0299 turbocharger underboost code Based off of my own research it looks like the part is the whole turbocharger assembly or the east gate solenoid I believe it’s a safety issue for merging…
Engine lacks substantial power and has almost cause multiple collisions. Check engine light is on for a P0299 turbocharger underboost code Based off of my own research it looks like the part is the whole turbocharger assembly or the east gate solenoid I believe it’s a safety issue for merging onto expressways and not being fully up to speed and because of trying to turn onto busy highways The problem has been reproduced by the dealer but not fixed The components themselves have not been inspected There was no check engine light until the issue started happening
- Service brakes
While driving home from work. I heard a pop and seen smoke coming from my tire. I pulled over and seen fire behind the wheel. After looking it over the emergency parking brake motor that attaches to the brake caliper was blown apart. The pistons in the caliper pushed so hard against the brake pad that it was bent to a 90 degree angle. Had to replace pads, rotors, and calipers in both sides.
- Electrical system · Unknown or other
“Temporary loss service climate system ford fusion 2013” Ac turns on and off windows lock up when ac turns off. everything freezes up! I see online this should be a recall a lot of ford owners having the same problem!
- Steering
The steering wheel of my 2013 ford fusion S.E 2.5 Lm was tightly connected to the steering system until now. It has start wobbling over time and the problem have greatly increased as of 05\31\2026. I fear that if I can’t this problem fixed soon the whole steering wheel will disconnect one day. When…
The steering wheel of my 2013 ford fusion S.E 2.5 Lm was tightly connected to the steering system until now. It has start wobbling over time and the problem have greatly increased as of 05\31\2026. I fear that if I can’t this problem fixed soon the whole steering wheel will disconnect one day. When I told a mechanic about the problem he told me there was a recall put out by Ford Fusion Motors on many Ford Fusion Sedans for similar issues. I truly believe my car had to miss the recall.
- Engine · Unknown or other · Vehicle speed control
The vehicle goes into limp mode without warning no matter the speed. cylinder head temp sensor is not applicable on this 1.6 engine model. The coolant over temp light illuminates with or without the car running. coolant temperature sensor was replaced and indicates no faults to the obd. the coolant level and temperature is within spec.
- Steering
The contact owns a 2013 Ford Fusion. The contact stated that while steering the vehicle at various speeds, an abnormal, grinding sound would emit from the vehicle without warning. Upon investigation, the contact discovered that the vehicle was NHTSA Campaign Number: 23V162000(SERVICE BRAKES…
The contact owns a 2013 Ford Fusion. The contact stated that while steering the vehicle at various speeds, an abnormal, grinding sound would emit from the vehicle without warning. Upon investigation, the contact discovered that the vehicle was NHTSA Campaign Number: 23V162000(SERVICE BRAKES, HYDRAULIC). The contact made an appointment and spoke with the dealer about the failure. The contact was informed by a dealer mechanic that the grinding noise was not related to brake system but the Electric Power-Assisted Steering (EPAS). Upon further investigation, the contact discovered NHTSA ID Number: 15V250000(Steering) which the contact linked to the failure. The manufacturer was notified of the failure and the contact was informed that the vehicle was not included in the recall. The vehicle was not repaired. The failure mileage was approximately 210,000.
- Unknown or other
A power steering assist fault warning popped up on my vehicle after starting my car. It’s now extremely difficult to turn the wheel. There was no previous indication that there was an issue with the power steering.
- Unknown or other
No incident - back up camera issue. Glitches often, then goes black and does not work. Have also received error messages indicating "Camera is unavailable. Please contact your dealership." Has happened a few times in the past but is now happening more often
- Steering
I was driving the vehicle and a warning message came on related to the power steering module not functioning correctly. Immediately after the steering column locked up and was stiff and to tough to continue driving. I looked into repairs and notice a recall # 19S26 was issued in 2019 with my…
I was driving the vehicle and a warning message came on related to the power steering module not functioning correctly. Immediately after the steering column locked up and was stiff and to tough to continue driving. I looked into repairs and notice a recall # 19S26 was issued in 2019 with my specific vehicle in the list by year, brand and model for the exact problem described. When I contacted Ford, they advised me that my VIN # was not included in the recall. Wanted to file complaint due to the lack of coverage Ford offers for cars specifically covered under the recall.
- Service brakes
Brakes went out while driving. Brake fluid reservoir is full.
- Air bags · Electrical system › Horn · Service brakes
See attached document for complaint.
- Steering
Power steering / power steering assist failure. Complete loss of power steering
- Steering
The steering locked up while driving. I was unable to turn the steering wheel. My self and my brother were in the vehicle. At this time, I am contacting the dealer to look at the unit. It will not turn and is stuck in my driveway. I am being told the electronic steering rack may have failed.…
The steering locked up while driving. I was unable to turn the steering wheel. My self and my brother were in the vehicle. At this time, I am contacting the dealer to look at the unit. It will not turn and is stuck in my driveway. I am being told the electronic steering rack may have failed. Why does this not break way and allow some turning like the old hydraulic models? If I had been driving highway speeds, this would have been a serious accident.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Front Brake Jounce Hose Failures
On August 8, 2022, the Office of Defects Investigation (ODI) opened this investigation based on 50 Vehicle Owner Questionnaires (VOQs) alleging front brake jounce hose ruptures on model year (MY) 2013-2018 Ford Fusion and Lincoln MKZ vehicles. A ruptured front brake hose results in a brake fluid leak. As a result, the…
On August 8, 2022, the Office of Defects Investigation (ODI) opened this investigation based on 50 Vehicle Owner Questionnaires (VOQs) alleging front brake jounce hose ruptures on model year (MY) 2013-2018 Ford Fusion and Lincoln MKZ vehicles. A ruptured front brake hose results in a brake fluid leak. As a result, the driver may experience an increase in pedal travel and a reduction in the rate of deceleration, increasing the risk of a crash. It should be noted that the subject vehicles identified fell outside the scope of NHTSA Safety Recall 20V-469, which addressed front brake hoses rupturing on certain MY 2015-2018 Ford Edge and 2016-2018 Lincoln MKX vehicles. The result causes a brake fluid leak, lengthening the distance needing to stop the vehicle, increasing the risk of a crash.On March 10, 2023, Ford Motor Company (Ford) submitted to NHTSA Safety Recall 23V-162 (Ford Recall 23S12) to address front brake jounce hoses that may rupture. Ford found the rupture occurs from a localized failure of the internal reinforcement braid due to cyclic fatigue through tensile/bending and torsional inputs during suspension and steering articulations. The supplier for the front brake jounce hoses is Hitachi. This recall affects the subject vehicles equipped with non-hybrid engines and the suspect front brake jounce hoses (a total of 1,280,726 vehicles). The recall covers subject vehicles built from February 3, 2012 to July 19, 2017 when the suspect hoses were used in vehicle production. The remedy is for dealerships to replace both front brake jounce hoses with new hoses that have a revised braid material at no cost. The vehicles equipped with hybrid engines are excluded from the recall because the internal hose pressure is much lower due to the regenerative braking provided by the hybrid brake system. No failures of brake hoses on hybrid vehicles have been reported to ODI or Ford.Ford's actions address ODIs concerns at this time. Hybrid vehicles will be monitored for related failures. The agency reserves the right to take further action if warranted by new circumstances.The 103 ODI numbers cited above can be viewed at NHTSA.gov under the following ID numbers:11511014, 11510867, 11510318, 11509030, 11505993, 11504989, 11504400, 11502147, 11502082, 11501820, 11501283, 11498439, 11498296, 11496842, 11496335, 11494931, 11494851, 11494252, 11493001, 11492084, 11492070, 11491444, 11491274, 11488858, 11488027, 11487627, 11487416, 11487233, 11486150, 11484924, 11484526, 11484080, 11483948, 11483926, 11483739, 11483723, 11482773, 11482690, 11481077, 11480788, 11480294, 11480052, 11479338, 11479334, 11479252, 11479247, 11479187, 11479094, 11479048, 11478985, 11478953, 11478729, 11478216, 11476892, 11476282, 11470558, 11468994, 11467109, 11466294, 11462746, 11461217, 11456065, 11455367, 11444848, 11436419, 11436376, 11430685, 11428329, 11425083, 11421026, 11420738, 11420735, 11420298, 11418197, 11403926, 11397549, 11366991, 11366757, 11361016, 11359968, 11354569, 11352165, 11350344, 11348799, 11343929, 11343205, 11331947, 11329020, 11319596, 11310529, 11292271, 11288455, 11254787, 11253479, 11253244, 11234622, 11230669, 11230050, 11228240, 11221111, 11143630, 11129392 and 11120228.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Door Latch Failures
In December 2019, the Office of Defects Investigation (ODI) opened this investigation based on 235 Vehicle Owner Questionnaires (VOQs) alleging doors failed to latch when closed, and/or inadvertently opened while driving, on model year (MY) 2012-2014 Ford Fiesta, and 2013-2014 Fusion and Lincoln MKZ. Some VOQs…
In December 2019, the Office of Defects Investigation (ODI) opened this investigation based on 235 Vehicle Owner Questionnaires (VOQs) alleging doors failed to latch when closed, and/or inadvertently opened while driving, on model year (MY) 2012-2014 Ford Fiesta, and 2013-2014 Fusion and Lincoln MKZ. Some VOQs reported the failure occurred after the latch had been remedied under a prior recall which involved fracture of the latch pawl spring tab due to thermally induced cyclic fatigue. Other VOQs alleged a similar failure in vehicles not previously recalled. A latch with a fractured pawl spring tab typically results in a ?door will not close? condition, however in certain somewhat rare circumstances, may result in the door coming open while driving. In response to ODI?s investigation, Ford has announced three field actions, as discussed below.On March 23, 2020, Ford submitted Safety Recall 20V-177 (Ford 20S15), a regional recall campaign to address door latch failures in vehicles not previously recalled under Safety Recalls 15V-246, 16V-643 and 17V-210. The recall affects vehicles currently or ever registered in certain high ambient temperature states (see 20V-177 for affected states). As a remedy, Ford will replace all four door latches free of charge.On August 24, 2020, Ford issued a non-safety regional field action (Ford 20R01) to address door latch failures on the same model/MY vehicles not covered under 20V-177 (i.e., not currently/ever registered in affected states). According to Ford, spring tab failure rates for vehicles covered by this action are about half that of the 20V-177 vehicles. Under this action, dealers will replace all door latches, free of charge, if either; a) the vehicle exhibits a related latch concern, or b) if the vehicle owner expresses a concern about the latches in their vehicles. Details can be found under NHTSA TSB No. 10190990, a copy of which is available in this investigative file available at NHTSA.gov.On June 8, 2020, Ford submitted Safety Recall 20V-331 (Ford 20S30) addressing vehicles previously remedied under NHTSA Recalls 15V-246, 16V-643 and 17V-210, where the repair may not have been properly completed, specifically not all of the door latches were replaced, or replaced correctly. This recall involves an inspection of the latches, with the option for a consumer self-inspection; owners could view the date codes on their latches (and confirm child safety locks are present on the rear doors) and then submit the information to Ford?s mobile app or website. A dealership inspection option was also available. Any vehicle found to have unreplaced defective latches requires the replacement of all door latches as directed by Ford.Regarding the 4,494 reports cited above, 1,485 involve scope-related failures (with 13% alleging door opening), and the remaining 3,009 reports involving remedy concerns (with 18% alleging door opening - note ODI was unable to verify the allegations of door opening). The three ODI injuries were all relatively minor. Ford?s reported injury incidences include one (unconfirmed) report of an ejection, three minor injuries with the others involving undisclosed injuries. Ford?s crashes involved two (unconfirmed) crashes alleging the incident door contacted another vehicle and three involving doors striking other property.The recalled vehicles include MY 2011-2015 Ford Fiesta, 2013-2016 Ford Fusion and Lincoln MKZ, 2015 Ford Mustang and Lincoln MKC, 2013-2015 Ford Escape and Ford C-MAX, 2012-2015 Ford Focus and 2014-2016 Ford Transit Connect.Ford's actions address ODI's concerns at this time. ODI will take further action if warranted by new information. The reference (OD
- Door Latch Failure
The Office of Defects Investigation (ODI) opened an investigation based on consumer allegations of doors failing to latch and/or inadvertently opening on model year (MY) 2011-2013 Ford Fiesta, MY 2013 Ford Fusion and MY 2013 Lincoln MKZ vehicles. All of the affected vehicles share the same door latch design.ODI has…
The Office of Defects Investigation (ODI) opened an investigation based on consumer allegations of doors failing to latch and/or inadvertently opening on model year (MY) 2011-2013 Ford Fiesta, MY 2013 Ford Fusion and MY 2013 Lincoln MKZ vehicles. All of the affected vehicles share the same door latch design.ODI has received 281 unique reports related to the alleged problem, with over 100 claiming that the door(s) opened inadvertently while the vehicle was in motion. There were no crashes reported however three separate injuries were indicated, all caused by a rebounding door striking a consumer after they attempted to close it. In response to ODI's Information Request (IR) letter, Ford Motor Company (Ford) responded with 1,102 unique reports related to the alleged problem. There were no injury claims but there were two claims of low speed accidents occurring involving the door opening while driving and damaging property. Ford also submitted 10,883 warranty claims related to door latch failures.Many customers indicated that the door would not latch at all and accordingly they decided to restrain the door by other means (looping the seatbelt through the door, or using rope or tape) in order to drive the vehicle.Some customers also reported multiple door latch failures occurring on the same vehicle on different doors occurring months apart.On April 23rd, 2015 Ford notified ODI that it would conduct a safety recall (15V-246) to remedy door latches failures on certain MY 2011-2014 Ford Fiesta and MY 2013-2014 Ford Fusion and Lincoln MKZ vehicles.According to Ford, the pawl spring tab located within the door latch can break off, or separate and result in a ?door will not close condition.The recalled vehicles include Fiesta vehiclesmanufactured from the start of the MY 2011 to May 2013 and Fusion and MKZ vehicles manufactured from the start of the MY 2013 year until May 2013.In May 2013 Ford reports that it made a manufacturing quality control change, specific to the spring tab, to improve the performance of the existing part.The door latch spring tab was redesigned and the new latch was phased into production in December 2014 with a new part number.Ford will replace all four door latches on the affected vehicles with the new latch design currently in production.The recall action initiated by the manufacturer appears to address the safety risks of concern to ODI.Accordingly, the investigation is closed.The ODI reports cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the identification (ODI) numbers found in the attached list.
- Electronic Throttle Body Malfunction
On February 21, 2013, the Office of Defects Investigations (ODI) opened Preliminary Evaluation PE13-003 to investigate allegations of electronic throttle body (ETB) failures resulting in sudden reduction of engine power in model year (MY) 2009-2013 Ford Escape, Fusion, Mariner and Milan vehicles. During this…
On February 21, 2013, the Office of Defects Investigations (ODI) opened Preliminary Evaluation PE13-003 to investigate allegations of electronic throttle body (ETB) failures resulting in sudden reduction of engine power in model year (MY) 2009-2013 Ford Escape, Fusion, Mariner and Milan vehicles. During this investigation, Ford identified a condition in subject vehicles equipped with 2.5L and 3.0L engines that may result in a sudden reduction of engine power.According to Ford, the ETB internal motor contacts may develop a high resistance material buildup condition on the commutator, resulting in intermittent electrical connectivity and reduced engine power. When this condition occurs, the Malfunction Indicator Lamp (MIL) or Wrench light will illuminate and the vehicle may enter a limited limp home mode.Ford?s trade name for the feature is Failure Mode Effects Management (FMEM) mode.In this mode, engine power and vehicle speed are reduced, while full function of the power steering, power braking, lighting, and climate control systems are maintained.ODI?s complaint analysis indicate that the predominant failure mode involved reduced motive power associated with the limited limp home mode with engine speeds limited to approximately 900 RPM. Analysis of warranty claims provided by Ford identified 59,807 claims related to ETB replacements and approximately 50 percent of claims are associated with diagnostic trouble codes (DTC) P2111, Throttle Body Stuck Open, and P2112, Throttle Body Stuck Closed.Ford described several factors where the ETB motor may fail resulting in DTCs P2111 or P2112 but the failure is not an existing stuck open or closed ETB valve position.According to Ford, the ETB control strategy provides the driver with three FMEM modes that allow varying degrees of vehicle mobility depending on the severity of the fault detected.DTCs associated with stuck open or closed throttle valves are designated the highest failure severity resulting in engine speeds limited to high idle corresponding to the limited limp home mode.Vehicles are not likely to unexpectedly stall as a result of this condition, but drivers may characterize the reduced functionality as a stall, even though their vehicle may still has motive capability.Other FMEM limp modes may result in reduced engine performance but will maintain vehicle speed above 20mph. During this investigation, Ford and its suppliers, Delphi and Igarashi, updated the powertrain control module (PCM) software to include a throttle body motor cleaning cycle during key-on and modified the ETB internal motor components design, surface finish and material composition to improve durability. Additionally, Ford developed a remedy procedure and issued a special Customer Satisfaction Program (CSP) 13N03 extending the ETB warranty coverage and instructing dealers to update the powertrain calibration to improve vehicle performance in the event that intermittent electrical connectivity of the throttle body motor contacts occurs. The program extends the coverage for up to 10 years of service or 150,000 miles from the warranty start date of the vehicle, all vehicles are eligible for the program through January 31, 2015 regardless of mileage.Owners of the affected vehicles will be contacted by mail to take their vehicle to a Ford dealer who will reprogram the PCM to the latest calibration. The bulletin was sent to dealers on January 17, 2014 and the owner letter mailing began on January 27, 2014. See the investigative file for copies of Ford's bulletin and owner letter. This preliminary evaluation is closed. The closing of this investigation does not constitute a finding that
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11008948While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions. While performing a transmission repair on some 2012-2024 Ford and Lincoln vehicles, a transmission seal kit may be on backorder due to supply chain interruptions.
- 10254138All accessory stick-on keyless entry keypads come with a wallet card containing the master code. If the accessory keypad was factory installed, this card will be placed in the glove box and should be handed to the vehicles owner during initial delivery. Unlike the integrated (wired) factory keypad, the accessory keypad master code cannot be retrieved from the vehicle using a diagnostic scan tool. If the wallet card for an accessory keypad is lost, follow these steps to recover the code. Dealer Key Code access is granted through the Dealer Program Enrollment System (DPES); dealership management can authorize users. The authorized user must go to FMCDealer.com > Parts and Service > Parts Product Line Information > Keys/Entry Devices > Aftermarket Keyless Entry Keypad Code Access. Follow the instructions on the screen to obtain the master code for the accessory keypad.
- 10240407Certain 2013 Model Year Fusion Vehicles Driver Airbag Module Replacement REASON FOR THIS SUPPLEMENT This program is being expanded to include VINs in the state of Texas in an effort to increase the number of parts returned for research.
- 10235153For 2000-2024 Ford and Lincoln vehicles, swapping a module from a vehicle for diagnosis purposes is likely to cause errors and is not recommended. It is also not recommended to order a replacement module using a vehicle identification number (VIN) from a different vehicle. Most modules on these affected vehicles are VIN/vehicle specific and hardware variations between modules do exist. Swapping a module from a vehicle or ordering a module using a different vehicle/VIN can cause ineffective repairs and additional vehicle down time. Make sure all appropriate Workshop Manual (WSM) procedures are followed when diagnosing the condition prior to all module replacements and only order modules using the correct VIN.
- 10228876Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
- 10226752Some 2013-2016 Escape/Fusion/MKZ vehicles may display an error message when updating the All Wheel Drive-ATC Barcode using the IDS service function after installing a new rear drive unit assembly (RDU) or active torque coupling (ATC) clutch assembly. To prevent this error from occurring, enter the universal ATC 4 digit barcode 7772. Once programmed, perform several figure 8 turns at parking lot speeds to verify there is no binding from the all wheel drive (AWD) system. If the vehicle binds in a turn, perform Pinpoint Test A. Refer to the Workshop Manual (WSM), Section 308-07A > Diagnosis and Testing.
- 10225458Some 2013-2020 Fusion, MKZ and 2013-2018 C-Max vehicles equipped with an HF35 transmission may exhibit a thumping/rubbing or grinding noise coming from the transmission. The noise may be present in all gear ranges including neutral when the vehicle is moving but will not be present when the vehicle is stationary or in park.
- 10222788Some Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
- 10222518Certain 2015-2018 Model Year Edge and Lincoln MKX Vehicles and 2013-2018 Model Year Fusion and Lincoln MKZ Vehicles Front Brake Flexible Hose Replacement Submitting Owner Letters
- 10218633Certain 2013 Model Year Fusion Vehicles Driver Airbag Module Replacement; Supplement 2 Labor and Parts Ordering Information
- 10218617Some 2013-2017 C-MAX Energi, 2013-2018 Focus battery electric vehicle (BEV), 2013-2020 Fusion plug-in hybrid electric vehicle (PHEV), 2015-2017 MKZ/MKZ Hybrid/MKC, 2016-2017 MKX and 2017 Continental vehicles equipped with 8 inch or larger center display screen may be unable to complete modem authorization after 3G to 4G modem upgrade was performed. No Authorization Pop-up will be displayed on the center display screen during the Authorization process. The vehicle may also not have proper functionality of remote app features such as remote start, return odometer, fuel information, or vehicle location incorrect in the app. This may be due to the SYNC software. To correct the condition, follow the Service Procedure to toggle Valet Mode.
- 10214758Some 2013-2017 C-MAX Energi, 2013-2018 Focus battery electric vehicle (BEV), 2013-2020 Fusion plug-in hybrid electric vehicle (PHEV), 2015-2017 MKZ/MKZ Hybrid/MKC, 2016-2017 MKX and 2017 Continental vehicles equipped with SYNC screens 8 inch or larger may be unable to complete modem authorization after 3G to 4G modem upgrade was performed. No Authorization Popup will be displayed on SYNC infotainment screen during the Authorization process. The vehicle may also not have proper functionality of remote app features such as remote start, and return odometer and fuel information to the app. This may be due to the SYNC software. To correct the condition, follow the Service Procedure to toggle Valet Mode.
- 10212957Some 2013-2023 Ford or Lincoln vehicles with modems activated through FordPass or LincolnWay may experience 12 volt battery drain symptoms when the customer uses non-Ford/Lincoln phone applications as an alternate channel to access vehicle commands such as door lock/unlock, remote start, vehicle location, etc. The battery drain may be caused by excessive calls for data through the vehicle network keeping it in an activated state. Recommend that the customer uninstall the app to ensure this is not contributing to battery symptoms experienced. Advise the customer that unaffiliated third-party app developers do not work directly with Ford to adhere to security, vehicle communication, and privacy requirements.
- 10211728Some 2013-2018 C-Max, 2013-2020 Fusion/MKZ, 2020-2022 Escape, 2021-2022 Corsair, 2022 Maverick vehicles equipped with HF35/HF45 hybrid transmissions can now be disassembled to repair and clean any contamination that may have been the result of a differential or transfer shaft bearing failure and the transmission can be overhauled/rebuilt. Service tools and service parts are now available. Refer to the Workshop Manual, Section 307-01.
- 10210730Some 2013-2016 Fusion, 2013-2018 C-MAX, 2014-2019 Escape, 2014-2021 Transit Connect, and 2015-2018 Edge vehicles may indicate an incorrect shifter lever position. This may be due to the bushing at the transmission end of the shifter lever cable resulting in a mismatch of cluster and selected gear position. To correct the condition, follow the Service Procedure steps to replace the bushing and on certain vehicles install the protective cap over the selector at the transmission end of the selector lever cable.
- 10209209This article supersedes TSB 21-2236 to update the models and year affected. Some 2013-2018 C-Max, 2013-2020 Fusion/MKZ, 2013-2022 Escape, 2015-2018 Focus, 2015-2019 MKC, 2015-2022 Edge/F150/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017-2022 F-Super Duty, 2018-2022 EcoSport/Expedition, 2019-2022 Ranger/Nautilus, 2021-2022 Bronco/Bronco Sport/Mustang Mach-E, 2022 Maverick vehicles may experience seat pan looseness, lateral movement, or a clunk/thump noise on turns. This may be due to the seat pan track. To correct the condition, follow the Service Procedure steps to install a reinforcement.
- 10209129Certain 2013 Model Year Fusion Vehicles - Driver Airbag Module Replacement: The program is a proactive effort to gather parts for research. Ford is voluntarily conducting this program to replace certain airbag modules manufactured by Takata Corporation on vehicles always registered and always residing in Florida. The replacement module being installed contains an inflator that was manufactured by a different supplier (does not contain a Takata inflator) and does not contain ammonium nitrate. The purpose of this program is to obtain field parts for testing and evaluation.
- 10207907This program is a proactive effort to gather parts for research. Ford is voluntarily conducting this program to replace certain airbag modules manufactured by Takata Corporation on vehicles always registered and always residing in Florida. The replacement module being installed contains an inflator manufactured by a different supplier (does not contain a Takata inflator) and does not contain ammonium nitrate. The purpose of this program is to obtain field parts for testing and evaluation.
- 10205040Hard start/no start/loss of engine RPM after refueling - built on or before 11/09/2013
- 10205031Touchscreen navigation system - arabic language - blank screen
- 10205013Reverse park aid chime - difficult to hear - audio system on . The 2013 Fulsion vehicles do not lower the audio system volume during a reverse park aid chime event. This feature was not implemented for 2013 model year.
- 102050102.0L Ecoboost - Fuel odor
- 102050086F35 Transmission - Fluid leak at left side halfshaft seal - built on or before 10/14/2013
- 102049962.0L GTDO - Illuminated MIL with DTC p2096 - Built on 09/01/2012 and through 08/01/2013
- 1020498749 CFR Part 579.5 Monthly Communications - March 2016 Air bag warning light illuminated with diagnostic trouble code (DTC) B141B and/or B141C
- 1020498649 CFR Part 579.5 Monthly Communications - January 2016
- 102049821.6L GTDI - Lack of power with MIL Illuminated - DTCS P0234, P0245, P0246 And/Or P0299. Some 2013-2016 Escape 2014-2016 Fiesta ST, and 2013-2014 Fusion vehicles equipped with a 1.6L Gasoline Turbocharged Direct Injection (GTDI) engine may exhibit a lack of power concern with malfunction indicator lamp (MIL) illuminated and diagnostic trouble codes (DTCs) P0234, P0245, P0246 and/or P0299 stored in powertrain control module (PCM) MEMORY.
- 10203850Various 2012-2015 vehicles equipped with a 3G modem may experience a lack of 3G modem performance. This may be due to the 3G cellular service functionality being decommissioned starting August 2021 and through March 2022. As the 3G cellular service is decommissioned, vehicles equipped with the 3G telematics control unit (TCU) will lose MyFord Mobile and MyLincoln Mobile app functionality/connectivity. Repair or Replacement of the TCU should no longer be performed using existing service stock. Replacement of the 3G TCU for this concern will result in programming concerns and repairs should not be performed.
- 10201034Some 2013-2021 Ford and Lincoln vehicles may exhibit noise when the brakes are applied. When diagnosing and repairing brake noise conditions, use the Workshop Manual (WSM) and the appropriate pinpoint test in section 206-00. The brake rotors should only be machined if directed by the WSM because one or more of the following conditions are present on the braking surface: scoring, excessive corrosion/rust or pitting, bluing/discoloration and/or heat spots. For additional information, refer to WSM section 206-00.
- 10199536Some 2013-2018 C-Max, 2013-2020 Fusion/MKZ, 2013-2021 Escape, 2015-2018 Focus, 2015-2019 MKC, 2015-2021 Edge/F150/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017-2021 F-Super Duty, 2018-2021 EcoSport/Expedition, 2019-2021 Ranger/Nautilus, 2021 Bronco Sport/Mustang Mach-E vehicles may experience seat pan looseness, lateral movement, or a clunk/thump noise on turns. This may be due to the seat pan track. To correct the condition, follow the Service Procedure steps to install a reinforcement.
- 10194434Some 2013-2016 Fusion, 2013-2018 C-MAX, 2014-2019 Escape, 2014-2021 Transit Connect, and 2015-2018 Edge vehicles may indicate an incorrect shifter lever position. This may be due to the bushing at the transmission end of the shifter lever cable resulting in a mismatch of cluster and selected gear position. To correct the condition, follow the Service Procedure steps to replace the bushing and on certain vehicles install the protective cap over the selector at the transmission end of the selector lever cable.
- 10189767Some 2013-2016 Fusion, 2013-2018 C-MAX, 2013-2019 Escape, 2014-2021 Transit Connect, and 2015-2018 Edge vehicles may indicate an incorrect shifter lever position. This may be due to the bushing at the transmission end of the shifter lever cable resulting in a mismatch of cluster and selected gear position. To correct the condition, follow the Service Procedure steps to replace the bushing and install the protective cap over the selector at the transmission end of the selector lever cable.
- 10183776Some 2013 Escape, 2013-2014 Fusion and MKZ vehicles built on or before 11/9/2013 may exhibit a hard start, no start and/or a loss of engine RPM after refueling. Some vehicles may also exhibit an illuminated malfunction indicator lamp (MIL) with diagnostic trouble code (DTC) P1450 and/or P0456 stored in powertrain control module (PCM) memory.
- 10183767Some 2012-2016 vehicles equipped with a touchscreen navigation system and the language set to Arabic may exhibit a blank screen. This may be the result of the ribbon cables not being fully seated inside the front display interface module (FDIM) or an improper software configuration of the FDIM.
- 10181933This article supersedes 17-2225 to update the vehicle model years affected and Service Procedure. Some 2013-2014 Fusion and 2013-2020 MKZ vehicles may exhibit unintended exterior mirror movement in wet weather conditions. This may be due to water intrusion into the exterior mirror connector. To correct the condition, follow the Service Procedure steps to remove the 16 pin connector and install two weather tight 8 pin connectors.
- 10180428Some 2009-2020 Ford and Lincoln vehicles equipped with turbochargers may exhibit an oil leak from the turbocharger oil supply or return tubes, O-rings or 6.7L pedestal gasket. Although oil may collect on the turbocharger, it is very rare for a turbocharger to leak oil. To isolate the source of the leak, refer to Workshop Manual (WSM), Section 303-00 General Information > Diagnosis and Testing > Engine > Engine Oil Leaks - Fluorescent Oil Additive Method procedure. When an oil leak is present at a turbocharger oil supply or drain tube, remove the affected oil tube and inspect for damage, and replace the O-ring seals, pedestal gasket or oil tube as required. Refer to WSM, Section 303-04. For claiming, use the affected oil tube or pedestal gasket as the causal part and applicable labor operations in Sections 6 and 9 of the Service Labor Time Standards (SLTS) Manual.
- 10177863This article supersedes TSB 19-2026 to update the vehicle model years affected. Some 2000 and newer Ford/Lincoln/Mercury vehicles equipped with aluminum body panels may exhibit corrosion concerns appearing as bubbled and/or peeling paint with or without accompanying white dust. Panel replacement is recommended.
- 10177123Some 2013-2016 Fusion/MKZ/C-MAX vehicles equipped with an HF35 transmission and built on or before 15-Aug-2015 may exhibit a thumping/rubbing or grinding noise coming from the transmission. The noise may be present in all gear ranges including neutral when the vehicle is moving but will not be present when the vehicle is stationary or in park. This may be due to the differential side bearings and/or the transfer shaft and housing. To correct the condition, follow the Service Procedure to install either a transfer shaft kit or a remanufactured transmission assembly.
- 10176123Some 2012-2020 Ford and Lincoln vehicles equipped with a TCU may exhibit an inoperative remote start with a 'Vehicle Failed To Start' message when using MyFord Mobile/Ford Pass/Lincoln Way mobile applications. The cellular cloud systems will only allow two remote start requests from the MyFord Mobile/Ford Pass/Lincoln Way apps without a vehicle drive event occurring. If a third remote start request is received, a Vehicle Failed To Start message will be displayed quickly in the mobile app. Once the vehicle is driven, the remote start counter is reset and will allow remote start commands to be sent from the mobile app. If the remote start system is not functioning using the key fob, refer to Workshop Manual (WSM) Section 303-06 for further diagnosis.
- 10175895Some 2013-2018 C-Max, 2013-2020 Escape/Fusion/MKZ, 2015-2018 Focus,2015-2019 MKC, 2015-2020 Edge/F150/Mustang, 2016-2018 MKX, 2016-2019 Explorer, 2017-2020 F-Super Duty, 2018-2020 EcoSport/Expedition, 2019-2020 Ranger/Nautilus vehicles may experience seat pan looseness, lateral movement, or a clunk/thump noise on turns. This may be due to the seat pan track. To correct the condition, follow the Service Procedure steps to install a reinforcement.
Every Ford Fusion model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.