2001 GMC Envoy
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
These records cover every 2001 GMC Envoy. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2001 GMC Envoy. Newest first.
Vehicle description: certain sport utility vehicles fail to comply with the requirements of fmvss no. 201, "occupant protection in interior impacts." these vehicles have a console cover/armrest cam latch that could release at less than the required load of the standard.
Risk and remedy
Risk
During a crash, the console cover could open and the cover or items stored under it could injury an occupant.
Remedy
Dealers will replace the console latch mechanism.
Owner complaints
5 complaints
What owners report most
Latest complaints
- Electrical system › Instrument cluster/panel
I own 2 envoy's 1 IS a 03 and the other one IS a 05 my 03 oil pressure and tach. Gauge messes up from time to time... My 05 oil pressure and speedometer doesn't work. I called GMC and they said to contact you... My air bag light stays on my 03, I'm guessing that means it won't work if needed..... *Tr
- Power train › Automatic transmission
Dt*: the contact stated while driving 30 mph, the vehicle shuddered while braking to a stop and accelerating from a stop. while braking, the vehicle also jerked forward slightly as if trying to accelerate. the vehicle was then parked and shut off. when the vehicle was restarted and shifted into…
Dt*: the contact stated while driving 30 mph, the vehicle shuddered while braking to a stop and accelerating from a stop. while braking, the vehicle also jerked forward slightly as if trying to accelerate. the vehicle was then parked and shut off. when the vehicle was restarted and shifted into reverse, the vehicle did not move. the transmission was then shifted into drive, but again did not move. a service dealer was notified, but the vehicle was not taken in for service.
- Air bags › Frontal › Sensor/control module · Electrical system › Horn · Suspension › Front › Control arm › Lower ball joint · Suspension › Front › Control arm › Upper ball joint
Consumer took the vehicle in to have the ball joints replaced at the dealer. after receiving the vehicle back consumer found that the horn no longer worked. Also, dealer examined the vehicle air bag module was defective. *ak
- Electrical system › Wiring › Front underhood
Vehicle stalled out on highway and died without warning due to a defective wire harness. dealer has inspected vehicle and will replace wire harness.*ak everthing shut down and the message displayed on the console to check brake system. Dealership installed wire harness and new pcm. *tt
- Fuel system, gasoline · Unknown or other · Visibility › Rearview mirrors/devices › Exterior
During normal operation of vehicle, engine check light illuminated, and then went off intermittently. Dealership has not been able to reproduce the problem.*ak consumer also stated that driver door mirror changes positons every time the vehicle IS put into reverse, the memory does not retain setting position, gas mileage IS poor.*slc
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Hazard light switch failure
On november 30, 2001, general motors (gm) conducted safety recall 01v-364 for the subject vehicles built between september 16, 1999 and august 28, 2001 to remedy a defective hazard switch that would cause a loss of hazard and stop lamp illumination.the hazard switch IS contained within the vehicle multifunction…
On november 30, 2001, general motors (gm) conducted safety recall 01v-364 for the subject vehicles built between september 16, 1999 and august 28, 2001 to remedy a defective hazard switch that would cause a loss of hazard and stop lamp illumination.the hazard switch IS contained within the vehicle multifunction switch.odi opened this investigation based on reports that some consumers were not notified of the original recall or that they had repairs done under 01v-364 but experienced subsequent multifunction switch failures.the multifunction switch supports the operation of cruise control, windshield wipers, exterior lighting and turn signals in addition to hazard and stop lamps. On may 21, 2008, gm notified the agency that it erroneously missed identifying 5,862 vehicles that should have been included in recall 01v-364.gm will now notify owners of these vehicles under a new nhtsa recall number 08v-231.owner notification began on june 17.the primary cause of brake lamp failure was a design change from copper to brass contact material in the hazard switch.this change was effective for vehicles built after september 16, 1999.gm changed the material back to copper for vehicles built after august 28, 2001. The remedy part for both 01v-364 and 08v-231 contains copper contacts.gm's data shows that less than 1% of vehicles repaired under recall 01v-364 required additional subsequent repair or replacement of the hazard or multifunction switch.this investigation IS closed.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11009156This Preliminary Information communicates to the dealer the process for downloading or updating operating software for the Tire Pressure Monitor, Active Fuel Injector tester, multi media tester, PICO Scope, GR8 starting/charging tester and Vehicle Data Recorder tools, giving website address and step by step instructions to complete the update.
- 11007744This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
- 11007743This Preliminary Information communication provides information to the technician about vehicles that the Heater-Vent-Air Conditioning blows warm air. Before calling General Motors Technical Assistance Center technician will need to have high and low pressures, outside temperature, humidity, and vent temperature.
- 11006621Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
- 11006421GM is receiving damaged (cracked or broken) transmission cores returned to the reman facilities. The damage is being caused either in the removal process by the technician, or inadequate packaging or shipping. This bulletin advises the dealers to be more careful not to damage the transmissions during removal and to package the core properly for return.
- 11004761This service bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
- 11004557This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
- 11002312This service bulletin provides information for dealers/technicians on Service Programming System (SPS) Error Codes E4398, E4399, E4401, E4403, M4404, M4413, M6954, M6955, E4414, E4423, E4491, E4492, or E6961 and resolution information.
- 10251890This technical bulletin advises of a new fuel injection cleaner kit used for decarbonizing the intake valves to correct conditions of rough idle, Crank no start, extended crank or misfire, MIL with DTCs, and explains how Top Tier fuels should be used to reduce carbon build-up.
- 10251887This bulletin advises the technician of possible location of an internal coolant leak from a specific cylinder head and location.
- 10250775This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10249590This bulletin provides information for use on a Product Assistance Claim (PAC), which is formerly known as a Product Allegation Resolution (PAR) claim.
- 10249579This PI bulletin advises the technician on the proper way to install the pistons in an engine.
- 10249011This informational bulletin provides information for dealers/technicians on Headlamp, Tail Lamp, License Lamp or Fog/Driving Lamp Damage.
- 10248444Vehicle Recalls
- 10247681Information On Requests To Add OnStar Bluetooth Option.
- 10247552This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
- 10246952Programming And Activation Of Replacement OnStar Modules.
- 10246951Programming And Activation Of Replacement OnStar Modules.
- 10246631Expanded Availability for Remanufacture and Return (R&R) Electronic Control Modules
- 10245951Canadian Customers Unable To Place Calls And Turn By Turn Inoperative In The United States.
- 10245950Canadian Customers Unable To Place Calls In The United States
- 10244274This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10244201This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
- 10242843The service bulletin advises the tech of a normal transmission shift condition and the delay in throttle response when the throttle plate is opened rapidly and advises the customer that it is normal for the delay.
- 10242262This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
- 10235799This service bulletin provides information about the Hunter wheel Road Force balancers that should be utilized for all repairs requiring balance and Road Force measurement.
- 10235713This bulletin provides information on Warranty Administration Required Operating Procedures - 8 Points (U.S. Only).
- 10234110This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10232287This warranty administration bulletin provides information regarding the field action courtesy transportation policy.
- 10232136This service bulletin provides information for dealers/technicians on Exterior Lamp Condensation and Water Leaks and Replacement Guidelines.
- 10228888This service bulletin provides diagnostic tips/steps on testing for possible EVAP leaks in the system to correct a customer concern of an MIL Illuminated with DTCs P0442 and/or P0455 Set.
- 10227056This service bulletin provides service information to technicians on guidelines to replace Oil Cooler, Oil Cooler Lines and Oil Tank if the engine was replaced where large amounts of debris has flowed throughout the oiling system.
- 10225615This service bulletin provides information on Module Harvesting.
- 10224820This service bulletin provides information for dealers on how to submit a product information report (PIR) (Canada Only).
- 10222839This service bulletin provides information on Handling Requests for Modifications to Permanently Import/Export Vehicles Between the U.S. and Canada.
- 10222796This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
- 10220319This diagnostic tip advises the tech not to separate the flexplate from the torque convertor or damage my occur if the engine is started while diagnosing for noise from the engine or transmission.
- 10219266This bulletin provides information on tools available to find an intake vacuum leak or exhaust leak to correct a condition of MIL Illuminated with Multiple Fuel Trim and/or Oxygen Sensor Codes Set.
- 10214869This service bulletin provides service information on new torque specification and installation procedure for ACDelco Spin-On Oil Filters.
Every GMC Envoy model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.