2014 GMC Sierra 3500
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › GMC › Sierra 3500 › 2014
These records cover every 2014 GMC Sierra 3500. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2014 GMC Sierra 3500. Newest first.
General Motors, LLC (GM) is recalling certain 2014 Cadillac Escalade, Escalade ESV, Chevrolet Silverado 2500, Silverado 3500, Suburban, Tahoe, GMC Sierra 2500, Sierra 3500, Yukon, and Yukon XL vehicles originally sold, or ever registered, in the states of AL, CA, FL, GA, HI, LA, MS, SC, TX, PR, AS, GU, the MP, and VI or "Zone A." Additionally GM is…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants, resulting in serious injury or death.
Remedy
GM will notify owners, and dealers will replace the front passenger air bag inflator with an alternate one, free of charge. Interim letters notifying owners of the safety risk were mailed on February 25, 2021. Second notification letters will be mailed once the remedy is available. Owner notification letters were mailed to 40 VIN owners on May 11, 2021. A second owner notification letter was mailed to all other owners on January 24, 2022. Owners may contact Chevrolet customer service at 1-800-222-1020; Cadillac customer service at 1-800-458-8006; and GMC customer service at 1-800-462-8782. GM's number for this recall is N212328800.
General Motors LLC (GM) is recalling certain 2009-2014 Chevrolet Silverado HD and GMC Sierra HD, 2009 GMC Topkick 5000, 6000, 7000 and 8000 Series and Isuzu F Series, and 2009-2018 Chevrolet Express, and GMC Savana vehicles, equipped with certain Plastic-Handle Fire Extinguishers or Push Button 'Pindicator' Fire Extinguishers. These extinguishers may…
Risk and remedy
Risk
In the event of a fire, if the fire extinguisher does not function properly, it can increase the risk of injury.
Remedy
GM will notify owners, instructing them to contact Kidde to get a replacement fire extinguisher, free of charge. The recall began June 11, 2018. Owners may contact Chevrolet customer service at 1-800-222-1020, GMC customer service at 1-800-462-8782, and Isuzu customer service at 1-866-441-9638. GM's number for this recall is 18146.
General Motors LLC (GM) is recalling certain 2011-2015 Chevrolet Silverado 3500 and GMC Sierra 3500 trucks equipped with dual fuel tanks. The low fuel level sensor for the front tank may stick causing the rear tank to overfill the front tank.
Risk and remedy
Risk
If the front tank overfills, the excess pressure may cause the front tank to expand and contact the driveshaft, possibly resulting in a hole in the tank. The hole will leak fuel, which in the presence of an ignition source, can increase the risk of a fire.
Remedy
GM has notified owners, and dealers will replace the rear tank fuel pump or update the fuel-level sensor software, as well as inspect the front tank, replacing it as necessary, free of charge. The recall began December 11, 2017. Owners may contact GM customer service for Chevrolet 1-800-222-1020 or for GMC customer service at 1-800-462-8782. GM's number for this recall is 17399.
Owner complaints
7 complaints1 involved a crash1 injuries
What owners report most
Latest complaints
- Power train
Transmission Control Module TCM failed while driving down the freeway I84 in Boise Idaho. AC Delco part number 24256861. This caused the truck to go into limp mode when at highway speed. While in limp mode the truck would not respond to throttle commands. Truck slowed to 20mph causing a…
Transmission Control Module TCM failed while driving down the freeway I84 in Boise Idaho. AC Delco part number 24256861. This caused the truck to go into limp mode when at highway speed. While in limp mode the truck would not respond to throttle commands. Truck slowed to 20mph causing a disruption in traffic flow and making it very difficult to get off the freeway, dodging traffic. The TCM failure has been confirmed through a local GMC dealer (Dennis Dillon in Boise Idaho). The Manufacture (General Motors) has discontinued manufacturing this part leaving my vehicle and thousands of others failed. GM's responce is the part is on a national backorder. 24-26 months at the earliest. Aftermarket support is none existent. There were no warning lamps or messages or symptoms prior to the failure. Very limited parts are available on Ebay (10 or less) . Dealer price for the TCM is $710. Ebay pricing is 4-10 thousand. GM customer assistance provides no answers and fails to ackowledge the safety concern of the failed transmission controller.
- Electrical system · Exterior lighting · Vehicle speed control
Transmission control module failed. Reduced power to vehicle to first gear. Blinkers, speedometer door locks, and other Safety and driving devices did not work. Check engine turned on. Device is held at some gmc dealerships nationally however they will not sell the part to have the truck repaired.
- Engine · Fuel/propulsion system
CP4 High Pressure Fuel Pump failed/disintegrated causing metal shavings to be pumped through out the fuel lines, injectors and connected systems requiring a replacement of the pump, injector and fuel lines totaling over $11,000 in repairs. Trucks mileage was 94112 at the time.
- Service brakes
TL* the contact owns a 2014 GMC sierra 3500. The contact stated while driving at 35 mph, the brakes failed causing the front driver side of the vehicle to crash into a sign. The contact was able to drive the vehicle back home. The contact suffered some leg soreness. A police report was filed. The…
TL* the contact owns a 2014 GMC sierra 3500. The contact stated while driving at 35 mph, the brakes failed causing the front driver side of the vehicle to crash into a sign. The contact was able to drive the vehicle back home. The contact suffered some leg soreness. A police report was filed. The contact stated no warning light was illuminated. The vehicle was taken to ryan automotive group (1101 oliver rd, monroe, la 71201) where the body damage was repaired however, the failure cause was not diagnosed. The contact then received recall notification a few months later for nhtsa campaign number: 19v645000 (service brakes, hydraulic) and which the contact believed was related to his failure. The manufacturer had been informed of the failure and informed the contact that they could not reimburse the vehicle damage to the vehicle. The failure mileage was approximately 68,000.
- Fuel/propulsion system
Got a recall on december 15, 2017 about the second gas tank issue. advised not to fill the second tank because it cause the front tank to expand, rub the drive shaft, and cause a leak and possible fire. they said that they would notify when parts are available. have not heard anything back yet. It has been 2 months. we travel long distances with this truck and need the added fuel from the second tank. thank you
- Steering
Power steering failed while driving, brakes immediately less effective.
- Vehicle speed control
TL* the contact owns a 2014 GMC sierra 3500. While driving approximately 60 mph, the vehicle unintentionally accelerated without warning. In addition, while driving 25 mph, the vehicle accelerated unintentionally when the brake pedal was depressed. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The failure mileage was 14,638.
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11011989This service bulletin provides information on the harmful effects of ethylene glycol in transmission fluid.
- 11011900This diagnostic tip bulletin provides additional information on how to diagnose a possible valve, lifter or camshaft issue.
- 11011805This Preliminary information communicates a GM part number forreflective high temperature heat or insulating tape when repairing wiring harnesses.
- 11011709This bulletin advises the dealers to maintain the vehicle stock on hand by doing a full inspection on the vehicles before being sold (prepping) to the customer.
- 11011704This informational bulletin provides technicians and dealership personnel with spray-in bed liner general information and repair procedures.
- 11011205This informational bulletin explains Unscheduled Supplemental Services and the importance of GM Simplified Maintenance Schedules.
- 11011119This Preliminary information communicates to dealers GM is working on a solution for outdated Apps
- 11010546This informational bulletin provides technicians and dealership personnel with spray-in bed liner general information and repair procedures.
- 11010545This service bulletin provides information on key code security rules and information on GM keycode look-up applications (U.S).
- 11010544This service bulletin explains how to measure for oil consumption and possible reasons for loss of oil.
- 11010491This warranty administration bulletin provides policy information for GM courtesy transportation and roadside assistance programs.
- 11010490This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
- 11010421This warranty administration bulletin provides policy information on the requirements for 12V battery testing and warranty replacements.
- 11009764This service bulletin provides information on Concerns or Questions Regarding Installation of Dealer Installed Accessories.
- 11009756This bulletin provides information on Policies Applicable to All U.S. Dealers for Engine and Transmission Assembly Replacement Under Warranty, Policy or Customer Enthusiasm and information on Submission of Warranty Transaction in Global Warranty Management.
- 11009532This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
- 11009531This service bulletin provides information for maintenance cleaning of the fuel injectors and gasoline detergent additive.
- 11009118This Preliminary information communicates information on adding RPO UF3 Fast Idle to a vehicle.
- 11009088This service bulletin provides information on some vehicles that may rock or move slightly forward or rearward while in Park at start up after cold soak. This condition may be accompanied by a clunk noise. This is a slight movement that is more often seen visually, rather than felt, when viewed from the outside and using the auto-start feature, if equipped.
- 11009039This warranty administration bulletin provides policy information, proper labor operation selection and causal part identification for warranty transactions (U.S. Only).
- 11009037This service bulletin provides information on Enhancing Field Product Reports with Digital Pictures.
- 11009031This informational bulletin provides information on Steering Bump or Clunk Noise on Rough Roads or Potholes.
- 11008956This service bulletin provides information for dealers/technicians on When and How to Submit a Field Product Report (FPR) (U.S. and Canada Dealers Only).
- 11008906This service bulletin provides graphics, information and guidelines for engine component wear to assist service personnel as a guideline to perform necessary engine repairs and prevent unnecessary engine replacement.
- 11008898The bulletin provides direction on how to locate the Temporary Service Part (TSP) form in GlobalConnect.
- 11007936This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak.
- 11007935This service bulletin provides information to dealership personnel on diagnosis and replacement of shock absorber and strut due to fluid leak.
- 11007721This service bulletin provides information on AGM batteries that require less frequent charging in storage.
- 11007208This Preliminary Information communication provides information to the technician about changing the tire and wheel size on vehicles. General Motors will only support a tire calibration for tires that have been sized, tested and designed for the vehicle in question and its applications. Technician should not use the information that is provided by the antilock braking system tire size selection.
- 11007155This informational bulletin advises the technician that the engine and related parts will be debited if found that the tech did not properly prepare the engine block from dirt and debris in bolt holes or if found that the block was damaged by the tech.
- 11007121This bulletin provides information on Engine Concerns that could result from lack of scheduled maintenance, improper service or aftermarket calibrations.
- 11007116This bulletin provides information on identifying Non-GM Engine Calibrations for Gasoline Engines using the Tech 2 or GDS 2.
- 11007115This service bulletin provides information on Internal Engine Noise or Damage After Oil Filter Replacement.
- 11007095This bulletin provides information on the TOP TIER Detergent Gasoline Licensed Brands and the TOP TIER Diesel Fuel Licensed Brands that are recommended for use in all GM vehicles and the TOP TIER FUELS website URL.
- 11007091This service bulletin provides guidelines and diagnostic/repair information to technicians regarding vehicle engine oil consumption.
- 11006849This service bulletin provides information on regular inspection of the Seat Belt Lap Anchor.
- 11006682This service bulletin provides information on a guide to help reduce repeat visits for the same customer concern.
- 11006670This service bulletin advises about the possible issues that may occur when using a scotch brite pad or highly abrasive disk on gasket sealing surfaces or reused parts.
- 11006644This Warranty Administration service bulletin provides information for dealers/Service advisors on when and how to submit a Pre-Repair Authorization (PRA).
- 11006621Vehicle Wide Programming (VWP) is a new process to update software on GM Vehicles. It provides the ability via a single selection within Techline Connect to first identify which modules need updating and then proceed to updating affected modules (with some exceptions). The updating of modules is completed in parallel instead of the technician needing to update one module at a time. This allows a more streamlined approach for dealers and customers.
Every GMC Sierra 3500 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.