2008 Infiniti G35
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Infiniti › G35 › 2008
These records cover every 2008 Infiniti G35. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
1 recall names the 2008 Infiniti G35. Newest first.
Nissan IS recalling 204,361 my 2007-2008 altima, altima hybrid, 350Z, 350Z roadster, my 2008 altima coupe, rogue, my 2009 murano, and infiniti my 2007-2008 G35 sedan, my 2008 G37 coupe and EX35 passenger vehicles equipped with continental automotive systems' occupant classification system (ocs) control units. a varistor in the ocs control unit located in…
Risk and remedy
Risk
This could result in the passenger air bag being suppressed which could fail to provide adequate protection in the event of a crash.
Remedy
Dealers will test the signal between the ocs and acu systems using a special tool to check that it IS functioning as designed. if necessary, the seat cushion (containing ocs hardware) will be replaced with a new one manufactured to specification. the recall began on november 4, 2008. owners may contact nissan at 1-800-647-7261 or infiniti at 1-800-662-6200.
Owner complaints
95 complaints10 involved a crash1 involved a fire3 injuries
What owners report most
Latest complaints
- Air bags
B1022 OCCUPANT SENS C/U [COMM FAIL] - CURRENT B1022 OCCUPANT SENS C/U [COMM FAIL] - PAST Passenger seat Air Bag: There is a recall on this part for my vehicle's year make and model, but my VIN shows my car isn't apart of the recall.
- Steering
Electronic Steering Column Lock (ESCL) failed leaving me stranded as car was unable to start. There was a recall on the 2009 model but not my 2008 even with identical part.
- Unknown or other
Water driving off of the roof of the car got plugged. Also, water running into the engine has caused rust holes. Water has gotten into the car through the sunroof. LOTS of complaints regarding this issue. Needs recalled.
- Unknown or other
Dashboard is melting/cracking causing a glare creating a visibility issue. Definitely a safety issue.
- Air bags
The contact owns a 2008 Infiniti G35. The contact stated there was a blinking alert for passenger air bag on the instrument panel and the centerpiece console. The contact took the vehicle to the dealer and it was confirmed the air bag sensor failed. The vehicle was not repaired due to cost and…
The contact owns a 2008 Infiniti G35. The contact stated there was a blinking alert for passenger air bag on the instrument panel and the centerpiece console. The contact took the vehicle to the dealer and it was confirmed the air bag sensor failed. The vehicle was not repaired due to cost and the VIN was not associated with the initial 2008 Infiniti recall. The contact stated the vehicle was purchased 1-2 weeks before the recall notice was issued. The contact referenced Infiniti TSB ITB08-045A as a possible solution however, the VIN was not included in the recall. The manufacturer was notified of the failure and opened a case. The failure milage was unknown.
- Air bags · Fuel/propulsion system · Unknown or other
Las Vegas
- Engine · Vehicle speed control
Runaway acceleration. Three times now in the last two weeks the RPMs went to maximum redline without my foot on the accelerator pedal. Fortunately all occurred when I was at very slow speed and either in a driveway or a parking lot. Each time I immediately put the transmission to neutral and…
Runaway acceleration. Three times now in the last two weeks the RPMs went to maximum redline without my foot on the accelerator pedal. Fortunately all occurred when I was at very slow speed and either in a driveway or a parking lot. Each time I immediately put the transmission to neutral and shut off the engine. For the first occurrence, Restarting the engine all went back to normal. But for the second instance, two weeks later on restart the engine again instantly went to maximum RPM (deep redline). On a second restart, with additional delay before attempting a restart, the problem cleared. I took the car to a mechanic and they said no error diagnostics were recorded. On test drive he said he noticed some brief unexpected surges. He said for liability reasons no way he would work on the car. No warnings, no instrument indications, car does not seem to "know" throttle is at max redline.
- Structure › Body · Suspension
The Suspension Subframe Crossmember (Front) Part Number: 544B2-EG300 Supersession(s): 544B2EG300 Fits Infiniti G35’s (2007-2009) Have issues where it starts to rust on all areas of it . This includes the joints of the cross member and support areas. The rusting that occurs definitely impacts the…
The Suspension Subframe Crossmember (Front) Part Number: 544B2-EG300 Supersession(s): 544B2EG300 Fits Infiniti G35’s (2007-2009) Have issues where it starts to rust on all areas of it . This includes the joints of the cross member and support areas. The rusting that occurs definitely impacts the structural integrity of the part and it can very well be a safety issue and a fatality waiting to occur . The cost of replacing this part may vary , as prices range from $473.00 +tax to $937.00 + tax not including labor cost that associates with the getting this unit replaced .
- Electrical system
Temperature gauge shows car as running hot even after having thermostat replaced. Car continuously runs hot with no resolution from Infiniti mechanics.
- Air bags › Sensor › Occupant classification › Front passenger
The contact owns a 2008 Infiniti G35. The contact stated that the air bag warning light intermittently illuminated. Additionally, the contact stated that the vehicle was taken to the dealer for routine maintenance; however, the vehicle was diagnosed, and it was determined that the passenger’s side…
The contact owns a 2008 Infiniti G35. The contact stated that the air bag warning light intermittently illuminated. Additionally, the contact stated that the vehicle was taken to the dealer for routine maintenance; however, the vehicle was diagnosed, and it was determined that the passenger’s side air bag sensor failed and needed to be replaced. The vehicle was not repaired. The contact referenced the NHTSA Campaign Number: 08V521000 (Air Bags, Electrical System). The manufacturer was notified of the failure and the contact was informed that the VIN was not included in the recall and the contact was provided a case number. The failure mileage was approximately 128,000.
- Structure › Body · Suspension
Brought car in for any state inspection and found the front suspension crossmember to 100% rusted thru. Car failed inspection. Found out that this is a common failure on this model of infiniti. In addition replacement part is on national back order. So on top of a poorly designed part they are unable to keep them in stock.
- Structure › Frame and members · Suspension
The contact owns a 2008 Infiniti G35. The contact stated that while at a complete stop, there was an abnormal popping sound as the rear-end of the vehicle lowered to the pavement upon depression of the accelerator pedal. Upon inspection of the vehicle, the contact discovered that the rear subframe…
The contact owns a 2008 Infiniti G35. The contact stated that while at a complete stop, there was an abnormal popping sound as the rear-end of the vehicle lowered to the pavement upon depression of the accelerator pedal. Upon inspection of the vehicle, the contact discovered that the rear subframe was detached from the vehicle. The contact initially towed the vehicle home and then to an independent mechanic. The mechanic discovered that the rubber bushings that held the subframe was not a strong reinforcement to hold the subframe in place. The contact notified several dealers about the failure and each informed him that they were unaware of such a failure. The dealers informed him that he had to purchase an entire new subframe which could contain the same defective rubber bushings. The manufacturer was not notified of the failure. The vehicle was not repaired. The failure mileage was 130,000.
- Service brakes
TL* the contact owns a 2008 infiniti G35. The contact stated that while driving 75 mph, the rear brakes ceased. There was an abnormal scraping noise detected. there were no warning lights illuminated. The vehicle was taken several times to an independent mechanic where the contact was informed…
TL* the contact owns a 2008 infiniti G35. The contact stated that while driving 75 mph, the rear brakes ceased. There was an abnormal scraping noise detected. there were no warning lights illuminated. The vehicle was taken several times to an independent mechanic where the contact was informed that the rotors and calipers needed to be replaced. the local dealer was not contacted. The vehicle was not diagnosed nor repaired. The manufacturer was contacted however, no further assistance was provided. The failure mileage was 30,000. The vin was not available.
- Electrical system · Power train · Suspension
My car has been stalling while driving at low speed. Several warning lights come up (check engine light, slip light, battery light) and then the engine shuts down completely. Upon placing the car in park, I am able to re-start it. This IS a major safety issue. I believe my car IS part of recall…
My car has been stalling while driving at low speed. Several warning lights come up (check engine light, slip light, battery light) and then the engine shuts down completely. Upon placing the car in park, I am able to re-start it. This IS a major safety issue. I believe my car IS part of recall number 03v455000 - engine and engine cooling. However, my vin IS not part of the recall, but I am experiencing the same issues associated with this recall. This needs to be re-addressed. I have children, and I am worried that this issue can cause an accident, especially while I am driving on the freeway. I have seen various similar complaints related to this issue with infiniti.
- Engine · Fuel/propulsion system · Vehicle speed control
The car idles when taking off even after warming it up... While cars are passing me by. It acts like it wants to cut off while in traffic. it was raining on the passenger side. I can't even filled the car up with a full tank of gas. Only had the car for 3 weeks and the service engine soon light come on. Took it back multiple times and still not fixed
- Air bags
TL* the contact owns a 2008 infiniti G35. Whenever the front passenger seat was occupied, the air bag warning indicator displayed that it was off. The air bag warning indicator started to flash. The vehicle was taken to an independent mechanic who determined that the sensor needed replacement on…
TL* the contact owns a 2008 infiniti G35. Whenever the front passenger seat was occupied, the air bag warning indicator displayed that it was off. The air bag warning indicator started to flash. The vehicle was taken to an independent mechanic who determined that the sensor needed replacement on the front passenger side. The vehicle was not taken to the dealer for diagnostic testing. The manufacturer was not notified of the failure. The vehicle was not repaired. The approximate failure mileage was 110,000.
- Air bags
Passenger seat occupancy sensor failure. This disables the airbags for the front passenger. Cost to repair approaches the value of the car ($6K-7K). seems to be a common issue with this vehicle.
- Unknown or other
While driving the vehicle on the highway smoke started coming out of the undercarriage and the vehicle started catching on fire. Had to pull over to get out and wait for the fire department to put it out.
- Air bags
In july 2019 the right side curtain airbag deployed while the car was sitting in my driveway. the car was off and not occupied.
- Engine · Unknown or other
In my car, my radiator failed. That then made the transmission fluid and the coolant mix. My fluid in my radiator and transmission are like slime in there. My car doesn't function like it should.
- Air bags
When passenger sits in front seat, airbag deactivates. infiniti diagnosed code as b1018 and wants $7K to replace seat cushion assembly. infiniti refuses to acknowledge safety defect as part of their recall program by saying my vin IS not affected. the passenger side airbag deactivates after sitting in front seat for about a minute.
- Visibility/wiper
Dashboard melted creating a sticky, shiny layer on the dash. This causes glare on the windshield creating a visibility hazard.
- Steering
I was traveling at around 25mph on broadway street in san francisco when all of a sudden I felt my car start to swerve on it's own. I steered to correct it but my steering wheel was completely disconnected it felt like. All I could do was hit my brakes as quickly as I could but I ended up crashing…
I was traveling at around 25mph on broadway street in san francisco when all of a sudden I felt my car start to swerve on it's own. I steered to correct it but my steering wheel was completely disconnected it felt like. All I could do was hit my brakes as quickly as I could but I ended up crashing into a parked vehicle. My steering wheel had no weight and turned freely while the front wheels had no movement whatsoever. I couldn't even reverse so had to wait for the tow truck to come and pull me away from the vehicle I collided with. I called infiniti and they said they will not investigate this since I bought the car used, the mileage and it was previously in a front end collision in 2013. However, this should not happen as there IS no required or recommended maintenance for steering. I was lucky that this didn't happen on the freeway or the car didn't swerve into oncoming traffic. This IS a huge safety issue and I believe infiniti/ nissan should further investigate this before someone IS killed.
- Air bags › Sensor › Occupant classification · Seats
TL* the contact owns a 2008 infiniti G35. While operating the vehicle, the air bag indicator illuminated and flashed off and on. In addition, the passenger side air bag indicator remained illuminated while operating the vehicle regardless if the passenger seat was occupied. The vehicle was taken to…
TL* the contact owns a 2008 infiniti G35. While operating the vehicle, the air bag indicator illuminated and flashed off and on. In addition, the passenger side air bag indicator remained illuminated while operating the vehicle regardless if the passenger seat was occupied. The vehicle was taken to orlando infiniti (4237 millenia blvd, orlando, fl) where it was diagnosed that the passenger seat occupant sensor was faulty and the front passenger seat needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 78,100.
- Electrical system · Engine · Steering
My car has started stalling while driving, while driving! I have gone to the dealer to have issue fixed, once I get it fixed it happens again, and then the dealer says it might be something else. I have a small child and its terrifying knowing that if I'm on the highway my car will stall or…
My car has started stalling while driving, while driving! I have gone to the dealer to have issue fixed, once I get it fixed it happens again, and then the dealer says it might be something else. I have a small child and its terrifying knowing that if I'm on the highway my car will stall or anywhere for that matter. It's been happening for weeks, started at very low speeds and as of yesterday the engine shut off, no steering while going at a higher speed, I could have easily been in a wreck, or even killed someone walking. It's unsafe! There are many forums online regarding this issue with infiniti vehicles and they don't care. Lawsuit waiting to happen.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11002539INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11002537CAN COMMUNICATION NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001653CAN COMMUNICATION CODES DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001182WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001179REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001177WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10233611ABS/VDC CAN DIAGNOSIS INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232646REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232645WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232644WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10208936DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10208930CAN COMMUNICATION NETWORK DIAGNOSTIC FLOW CHART This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10207844CAN COMMUNICATION CODES DIAGNOSTIC TIPS AND GUIDELINES This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10192822SERVICE INFORMATION Replacement 5-speed rear wheel drive Automatic Transmission (A/T) assemblies and replacement control valves (valve bodies) now come with blank Transmission Control Modules (TCMs). Blank TCMs come without software and must be programmed (not reprogrammed) and then configured after they are installed. When ordering a replacement A/T or control valve, use the Infiniti electronic parts information systems to obtain the correct software program part number See this bulletin for further detail.
- 10192806IF YOU CONFIRM A refrigerant leak at a refrigerant pipe/hose joint location, ACTIONS 1. Inspect the metal surfaces of the pipe/hose joint for damage or contamination. NOTE: Do not replace a refrigerant pipe, hose, or other A/C component if an o-ring seal will solve the leak incident, if it should occur. 2. If no damage is found to the joint metal surfaces, replace the O-ring seal. See this bulletin for further detail.
- 10192802SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement "Certification Label" or "VIN Plate / Label" may be needed. These items may be available from Infiniti by request if certain criteria are met. This bulletinlists the criteria and provides an application form for such replacements. See this bulletin for further detail.
- 10192788SERVICE INFORMATION If the clip for the fuel filler cap tether becomes lost or is detached for any reason, it is no longer necessary to replace the fuel filler cap. The clip or "pin" is now available as a separate service part. NOTE - Do not replace the fuel filler cap if only the pin is needed. See this bulletin for further detail.
- 10192728SERVICE INFORMATION The purpose of this bulletin is to give Infiniti dealers guidelines to help determine if windshield breakage is covered under warranty or is the customer?s responsibility. Nissan North America (NNA) is not responsible for damage to glass that is a result of objects striking or scratching the glass. However, NNA is responsible for manufacturing issues such as distorted glass and cracks that are due to improper installation or damage to the glass during vehicle assembly. NNA typically does not find any type of cracks in the windshield due to stress after the dealership PDI. See this bulletin for further detail.
- 10192693SERVICE INFORMATION Windshield "foreign material" that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool. * Most any foreign material on the surface of the Windshield can be cleaned off by using #0000 super fine steel wool. >The #0000 grade super fine steel wool can be found in most hardware stores. Please see this bulleitn for further details.
- 10192639SERVICE INFORMATION This bulletin has compiled Tire Pressure Monitor System (TPMS) and Low Tire Pressure Warning System (LTPWS) information for: - Basic diagnosing of TPMS/LTPWS systems - Radio frequency interference causing a "No Data" (C1708, C1709, C1710, C1711) condition - Sensor leaks - Moving TPMS/LTPWS wheel assemblies from one vehicle to another and TPMS/LTPWS sensor registration - Air pressure changes with altitude and ambient temperatures - Aftermarket tire sealers - Aftermarket wheels - Inflating/deflating tires with TPMS/LTPWS sensors See this bulletin for further detail.
- 10192598SERVICE INFORMATION When servicing run flat tires or low profile tires: - Special equipment and procedures are required to avoid damage. - Specifically, Tire Pressure Monitor transmitters (TPMS sensors) can be damaged when improperly dismounting and mounting tires. - TPMS sensors becoming damaged during mounting or dismounting tires are not covered under warranty. - To avoid such damage, ensure that the tire changer being used and the operator of the tire changer are capable of servicing run flat and low profile tires. - Operator?s manuals for such tire changers must be followed. See this bulletin for further detail.
- 10192589SERVICE INFORMATION After ECM reprogramming, the Calibration Verification Number (CVN) needs to be automatically calculated prior to State emissions testing (also known as Inspection Maintainence, I/M, or SMOG testing depending upon location). Allowing the vehicle to idle for 22 minutes will allow for faster CVN calculation. It is recommended that customers utilize this method if the vehicle needs to be tested for emissions soon after ECM reprogramming. See this bulletin for further detail.
- 10192569SERVICE INFORMATION The Body Control Module (BCM) for the Applied Vehicles in this bulletin is now shipped as a blank unit. As with previous BCM replacements, when a blank unit is installed, the configuration process must be performed. See this bulletin for further detail.
- 10192514SERVICE INFORMATION Changes or modifications to the front seat assembly trim materials may affect the proper operation of the Front Seat-Mounted Side-Impact Supplemental Air Bags and Passenger Occupant Classification Sensor and could result in serious personal injury or death. Infiniti STRONGLY RECOMMENDS AGAINST making any change to seat trim materials from the factory equipped condition. This specifically applies to replacing the seat trim with non-factory materials; adding leather/cloth seat covers, seat pads, or seat storage pouches, etc. around or over the seat back and the passenger seat cushion. See this bulletin for further detail.
- 10192511SERVICE INFORMATION DTC B2190 (NATS ANTENNA AMP) can be stored for the following reasons: 1. Something other than an Intelligent Key is inserted into the Key-Slot. 2. An Intelligent Key issue. 3. A wiring issue between the Key-Slot and the BCM. 4. A Key-Slot issue. If DTC B2190 is stored due to 1 or 2 above, it will not erase, or go to "PAST", until a known good registered Intelligent Key is inserted into the Key-Slot. For DTC B2190 diagnosis; first perform the Service Manual DTC Confirmation Procedure. See this bulletin for further detail.
- 10192505SERVICE INFORMATION Two methods are used to update/upgrade Navigation Map Data: 1. The customer goes to www.infinitinavigation.com and is mailed update disc(s) or SD card and installs data, OR 2. The dealership is mailed update disc(s) and the customer must visit the dealership to have data installed. Use the matrix in this bulletin to determine which method is utilized for each Applied Vehicle. See this bulletin for further detail.
- 10192475SERVICE INFORMATION If a customer describes lack of power or poor acceleration, perform the following checks before attempting any repair: * Check for stored DTCs. * Check if the driver is resting their left foot on the brake pedal while accelerating. Advise the customer not to rest their foot on the brake while accelerating. * Use CONSULT-III plus in Engine Data Monitor to check operation of the brake lamp circuit signal. Monitor the brake switch during the incident; it should be "OFF". Please see this bulletn for further details.
- 10192396SERVICE INFORMATION Related to communication codes U1000, U1001, U1002, U1010: - Always diagnose the communication codes first. - When a module reports a U1000 code, it is typically operating normally; however, there is a communication error external to that module on the CAN network. - U1000 indicates an error. V-CAN diagram or CAN Diag Support Monitor provides data to determine the location of the error. See this bulletin for more information.
- 10192314SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.
- 10192265SERVICE INFORMATION If one or more of these EVAP leak DTCs are stored (P0442, P0455, P0456) on a 2007 through 2011 Infiniti vehicle, a loose fuel fill cap may be the cause. Use the following resources to perform diagnostics and confirm the cause of stored DTCs. ASIST: - Appropriate Service Manual diagnostic procedures - Applicable Technical Service Bulletins (TSB). Leak Test: - With CONSULT-III plus - WORK SUPPORT >> EVAP SYSTEM CLOSE. NOTE: Use Essential Tool J-42909 or equivalent to pressurize the EVAP system. - With a "Smoke" leak detection machine. Refer to the machine's Operator's Manual for proper use. Make sure the customer is informed of the proper fuel filler cap installation.
- 10192235Infiniti Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Infiniti design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Infiniti's standards. Infiniti Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Infiniti most strongly discourages, and recommends that these wheels NEVER be subjected to, aftermarket chroming. See this bulletin for further details.
- 10192232SERVICE INFORMATION This TSB is for troubleshooting of CAN Modules with "Diag-On-CAN" Diagnostics. The flow charts below are meant to troubleshoot current CAN DTCs. The flow charts are intended to diagnose one module at a time; repeat the process as needed for additional control units. Please see this bulletin for further details.
- 10192219SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake issues fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel, or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake issue based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific issue. See this bulletin for further details.
- 10192218If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incidents. - Brake judder: A brake pedal pulsation and/or steering wheel shimmy when braking that occurs when there is too much thickness variation of the brake rotors (see ITB00-024). See this bulletin for further detail.
- 10192191As part of an enhanced emissions test for Inspection & Maintenance (I/M), some States may require the System Readiness Test (SRT) status be checked. - The SRT is used to indicate whether the engine control module (ECM) has completed self diagnosis of major emissions systems and components. - In these instances the State may require completion of the SRT before permitting the emissions inspection to proceed. Refer to this Bulletin for further details.
- 10192188SERVICE INFORMATION The navigation system in the Applied Vehicles of this bulletin has an HDD (Hard Disc Drive) map data storage system. This bulletin contains the information and instructions for updating/upgrading the map data with a new version. See this bulletin for further detail.
- 10192146SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement. - A strut or shock absorber that should be replaced due to rod resistance/noise issues. See this bulletin for further detail.
- 10192126SERVICE INFORMATION If a CD/DVD Player incident is noted, a possible cause may be improper CD/DVD disc care, condition, or usage. This bulletin provides updated CD/DVD Player operation instructions to avoid potential incidents/customer concerns caused by improper care and usage of CD/DVD discs. To aid in solving customer concerns, use the guidelines in this bulletin when speaking to customers or inspecting incident vehicles. - Customers must not use discs that are warped, scratched, chipped, cracked, have abnormal edges or are otherwise damaged. Damaged or poor condition discs may cause the Player internal mechanism to jam or have optical pick-up errors. NOTE - Do not make a Warranty claim against a Player that will not play damaged or poor condition discs as described in this bulletin. See this bulletin for further detail.
- 10192119IF YOU CONFIRM The customer reports any of the following: Engine hesitation at idle or very low speeds, and/or Engine speed drops lower than expected when decelerating or coming to a stop, and/or Engine stops running at idle or very low vehicle speeds (parking lot maneuvers), but can be restarted. NOTE: this incident may occur immediately after an oil change. ACTIONS 1. Refer to Step 2 in the Service Procedure to confirm this bulletin applies to the vehicle you are working on. 2. If this bulletin applies, reprogram the ECM. See this bulletin for further detail.
- 10190187INFINITI; DTC P0456 CAUSED BY EVAP LEAK AT VENT CONTROL VALVE O-RING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
Every Infiniti G35 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.