2003 Infiniti QX4
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Infiniti › QX4 › 2003
These records cover every 2003 Infiniti QX4. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2003 Infiniti QX4. Newest first.
Nissan North America, Inc. (Nissan) is recalling certain air bag inflator replacement service parts that may have been installed as part of a theft or collision repair. The parts include certain passenger-side air bag inflators designed to fit Infiniti 2002-2003 QX4, 2006-2010 M35 and M45; Nissan 2001-2003 Maxima, 2002-2006 Sentra, and both driver and…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Dealers will inspect and replace the inflators as necessary, free of charge. Owner notification letters are expected to be mailed September 14, 2022. Owners may contact Nissan's customer service at 1-800-867-7669.
Nissan North America, Inc. (Nissan) is recalling certain 2001-2003 Maxima, 2002-2006 Sentra, 2002-2004 Pathfinder, 2007-2011 Versa Sedan and Versa Hatchback, 2001-2004 Infiniti I30 and I35, 2002-2003 Inifiniti QX4, 2003-2008 Infiniti FX35 and FX45 and 2006-2010 M35 and M45 vehicles. The vehicles are equipped with non-desiccated, frontal passenger air bag…
Risk and remedy
Risk
An inflator explosion may result in sharp metal fragments striking the driver or other occupants resulting in serious injury or death.
Remedy
Nissan will notify owners, and dealers will replace the front passenger air bag inflators with alternate desiccated inflators, free of charge. The recall began February 12, 2020. Owners may contact Nissan customer service at 888-737-9511 or Infiniti customer service at 888-810-3715.
Nissan North America, Inc. (Nissan) is recalling certain model year 2001-2003 Nissan Maxima, 2002-2004 Pathfinder, 2002-2006 Sentra, 2002-2003 Infiniti QX4 and I35, 2003 FX35 and FX45, and 2001 I30 vehicles. Upon deployment of the passenger side frontal air bag, excessive internal pressure may cause the inflator to rupture.
Risk and remedy
Risk
In the event of a crash necessitating deployment of the passenger's frontal air bag, the inflator could rupture with metal fragments striking the vehicle occupants potentially resulting in serious injury or death.
Remedy
Nissan will notify owners, and dealers will replace the passenger air bag inflator, free of charge. The recall began on June 15, 2015. Owners may contact Nissan customer service at 1-800-647-7261. Note: On December 18, 2015 Nissan informed NHTSA of an amendment of this recall to remove 2004-2005 Infiniti FX35 and FX45 vehicles.
Nissan IS recalling certain model year 1996-2004 pathfinder and model year 1997-2003 infiniti QX4 vehicles originally sold, or currently registered in, connecticut, delaware, iowa, illinois, indiana, massachusetts, maine, maryland, michigan, minnesota, missouri, new hampshire, new jersey, new york, ohio, pennsylvania, rhode island, vermont, washington d.c.…
Risk and remedy
Risk
The strut housing may crack and pull away from the inner hood ledge assembly. this may lead to grinding noises, increased steering effort, and possibly the steering column to break, resulting in the loss of steering control, which could result in a crash.
Remedy
Nissan will inspect the strut housing and repair the vehicles as necessary, free of charge. an interim notification letter was sent out in may 2011. the second notice was mailed on july 25, 2011. owners may contact nissan at 1-800-647-7261.
Owner complaints
20 complaints2 involved a crash4 injuries
What owners report most
Latest complaints
- Air bags
I keep getting notices about this airbag recall, but this vehicle was donated to hudson high school and broken down for parts. This vehicle hasn't been on the road for over 3 years. Please take this off the recall list.
- Steering · Structure › Body
Bought a used car from a used car dealer with 1 previous owner. in 2011 a recall was supposedly done by indicating "inspected!" why wasn't the parts replaced?
- Structure · Suspension › Front › Macpherson strut
2003 infiniti QX4. consumer writes in regards to vehicle front strut tower severe rusts and cracks recall issues. *smd *tr
- Structure › Body · Suspension
This concern IS involving the r1109 recall issued by infiniti. The recall was performed six years ago, however rust, and holes in the metal are now visible. I was told that because the recall was already performed, there was nothing they could do to assist me. This vehicle will soon be unsafe to drive.
- Suspension
The control arm IS completely rusted away as the pathfinders that they recalled and IS doing exactly as they have done...but there IS no recall on the infiniti I was wondering why those and not the infiniti as we live in massachusetts and the salt does the same on this car now we have the death womble on this car
- Engine
TL* the contact owns a 2003 infiniti QX4. While driving over 45 mph, the front end of the vehicle shook and vibrated. The vehicle was taken to the dealer where it was discovered that the engine cradle was cracked due to rusting and corrosion. The manufacturer was notified of the failure. The failure mileage was 200,000.
- Fuel/propulsion system
Fuel filler neck has corroded causing gas to leak on to tire and brakes while filling gas tank. recall of previous model. *js
- Structure › Body
Running boards are completely rusted, they will either fall off while driving and could cause an accident or an unsuspecting person could be relying on them to enter the SUV and hurt them selves. The SUV was well taken care of, 1 owner, and the frame rails and chassis are considerably rust free.…
Running boards are completely rusted, they will either fall off while driving and could cause an accident or an unsuspecting person could be relying on them to enter the SUV and hurt them selves. The SUV was well taken care of, 1 owner, and the frame rails and chassis are considerably rust free. How come these are in such bad condition? Why don't infiniti have replacements for them alone and not the whole running board for over $1300 per side! That's insane and no one IS going to pay that for a 11+ year old SUV! *tr
- Suspension › Front
2003 infinity QX4. Attorney writes on behalf of the consumer in regards to the front driver's side strut tower housing unit *tgw the lawyer stated his client's vehicle was seized by infiniti and they offered to buy the vehicle back. His client never received a recall letter and was only made aware of the problem when he took the vehicle in for servicing. Recall# 11v244000. *Jb updated 08/09/12
- Suspension · Suspension › Front › Macpherson strut
Passenger side strut tower completely rusted out, the dealership deemed the vehicle unsafe to operate. However, the current recall does not cover the passenger side, only the drivers side and it's my responsibility to cover the cost of the replacement. *kb
- Steering
Tl*the contact owns a 2003 infiniti QX4. The contact stated the steering wheel became unresponsive while changing lanes. As a result the vehicle was involved in a rollover crash. A police report was filed and all four passengers in the vehicle suffered minor injuries. One of the passengers also…
Tl*the contact owns a 2003 infiniti QX4. The contact stated the steering wheel became unresponsive while changing lanes. As a result the vehicle was involved in a rollover crash. A police report was filed and all four passengers in the vehicle suffered minor injuries. One of the passengers also sustained a dislocated shoulder. The vehicle was destroyed. The vehicle was not taken to have the failure diagnosed or repaired. The manufacturer was not made aware of the failure. The failure and current mileages were 95,000.
- Suspension › Front
Tl*the contact owns a 2003 infiniti QX4. While driving approximately 40 mph, the contact heard a loud banging noise outside the vehicle and suddenly the vehicle began to lean towards the driver's side. The contact maneuvered to the side of the road to inspect the vehicle and then resumed with…
Tl*the contact owns a 2003 infiniti QX4. While driving approximately 40 mph, the contact heard a loud banging noise outside the vehicle and suddenly the vehicle began to lean towards the driver's side. The contact maneuvered to the side of the road to inspect the vehicle and then resumed with caution. The vehicle was taken to a repair shop where they informed that the frame was severely rusted; and the front driver side strut tower fractured due to excessive corrosion. the technician also stated that the failure would eventually affect the steering. The contact planned to have the vehicle repaired. There was an open investigation associated with nhtsa action number pe11004 (suspension: front: shock absorber). The failure mileage was 149,000. updated 03/22/11*lj updated 1/4/11 *cn
- Suspension › Front › Macpherson strut
Tl*the contact owns a 2003 infiniti QX4. The contact stated that while driving approximately 40 mph, the contact heard a banging noise coming from the front strut tower on the driver side. The vehicle was taken to an independent mechanic. The mechanic stated that where the subframe met the shock…
Tl*the contact owns a 2003 infiniti QX4. The contact stated that while driving approximately 40 mph, the contact heard a banging noise coming from the front strut tower on the driver side. The vehicle was taken to an independent mechanic. The mechanic stated that where the subframe met the shock tower was completely corroded. The mechanic stated he would have to weld in new metal in order to repair. The vehicle was repaired. There was an open investigation pe11004 (suspension: front: shock absorbe and suspension: front: macpherson strut ). The approximate failure mileage was 130,000.
- Power train › Axle assembly
TL* the contact owns a 2003 infiniti QX4. The contact stated while attempting a turn at 20 mph, the vehicle stalled without warning. the contact exited the vehicle and found the rear axle was extended three feet from the vehicle. The vehicle was towed to an authorized dealer. The dealer advised…
TL* the contact owns a 2003 infiniti QX4. The contact stated while attempting a turn at 20 mph, the vehicle stalled without warning. the contact exited the vehicle and found the rear axle was extended three feet from the vehicle. The vehicle was towed to an authorized dealer. The dealer advised there was not a recall for the failure and any repairs would be at his expense. The vehicle was not repaired. The approximate failure and current mileages were 74,000.
- Service brakes, hydraulic
There IS a pulsing feel in the brakes. Have checked online and realized that it seems to be a common enough complaint by other owners. On hard stops the push back by the pedal IS hard enough that the brakes lockup intermittently. This IS different from the pulsing feel of the anti-lock system. It…
There IS a pulsing feel in the brakes. Have checked online and realized that it seems to be a common enough complaint by other owners. On hard stops the push back by the pedal IS hard enough that the brakes lockup intermittently. This IS different from the pulsing feel of the anti-lock system. It feels as though the rotors are warped. It IS felt in the steering wheel also, and increasingly in the vehicle in normal driving without applying the brakes. It IS not the tires which are fastidiously kept new omi. No incident yet but I believe there IS a trend that needs to be investigated. *Tr
- Structure
Severe corrosion on factory installed running boards on infinity QX4 which could collapse causing injury. *Tr
- Visibility › Power window devices and controls
Tl*the contact owns a 2003 infiniti QX4. The front passenger and driver side windows roll down without warning intermittently. the failure has not been diagnosed by a dealer. The failure mileage was 65,000 and the current mileage was 71,000. Updated 09/23/09. *lj updated 09/23/09.*jb
- Structure › Frame and members · Suspension › Front
While driving my 2003 infiniti QX4 on the highway, I noticed a severe vibration coming from the left side of my vehicle and tire. I took it to a local service repair shop and they took off my left front tire and saw where my inner apron was severely corroded, cracked and perforated.they stated…
While driving my 2003 infiniti QX4 on the highway, I noticed a severe vibration coming from the left side of my vehicle and tire. I took it to a local service repair shop and they took off my left front tire and saw where my inner apron was severely corroded, cracked and perforated.they stated they never seen such a type of corrosion in this area and that I should have the manufacturer look at it and take it to a body shop. They stated that the vehicle should be repaired as soon as possible as it was a serious safety risk as the strut tower could dislodge and come up through the hood of my vehicle which IS close to my brake line and could affect my steering. I did take it 2 body shops both of which concurred that this type of corrosion should not have happened and they also stressed it was compromising my safety and there could be a shift of my suspension and loss of control of my vehicle while driving. I did contact infiniti service department and it was only glanced at not inspected. I filed a complaint with infiniti consumer affairs and wrote a letter to the owner of closest dealership. I was than about a week later asked by the local dealer if they could look at my SUV again and pictures were emailed by body shop to the service department of dealership and sent to corporate and my request to have them repair vehicle was denied and I have had vehicle repaired at my cost at local body shop. pictures are available that were taken by body shop and I statement of serious safety risk of vehicle IS also available from body shop. *Tr
- Service brakes, hydraulic
There was a severe pulsation in the rear of the vehicle when the brake were applied. The dealership serviced the vehicle over 20 times. *Jb
- Service brakes, hydraulic › Antilock/traction control/electronic limited slip
While driving at 35 mph on a dry single lane paved road, I unavoidably ran my infiniti QX4 SUV over a tree branch in the road. the tree branch briefly became entangled under the vehicle and then was expelled. once the tree branch was released, my ABS light came on. I took my vehicle to my…
While driving at 35 mph on a dry single lane paved road, I unavoidably ran my infiniti QX4 SUV over a tree branch in the road. the tree branch briefly became entangled under the vehicle and then was expelled. once the tree branch was released, my ABS light came on. I took my vehicle to my inifiniti dealer who put the vehicle on a lift. examination showed no damage to the vehicle other than the wiring assembly to the front wheel sensor had its wire and electrical pin pulled from the electrical connector to the front wheel sensor. ABS for the vehicle was disabled. *la
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Frame/Body Structure Corrosion
In their Defect Information Report (DIR) of April 20, 2011, Nissan North America, Inc. (Nissan) notified NHTSA that it would conduct a safety recall of certain 1996-2004 Nissan Pathfinder and 1997-2003 Infinity QX4 vehicles to repair corrosion damage to the driver's side front strut tower.The vehicles included in the…
In their Defect Information Report (DIR) of April 20, 2011, Nissan North America, Inc. (Nissan) notified NHTSA that it would conduct a safety recall of certain 1996-2004 Nissan Pathfinder and 1997-2003 Infinity QX4 vehicles to repair corrosion damage to the driver's side front strut tower.The vehicles included in the recall are those that were originally sold, or are currently registered in salt belt states including Connecticut, Delaware, Iowa, Illinois, Indiana, Massachusetts, Maine, Maryland, Michigan, Minnesota, Missouri, New Hampshire, New Jersey, New York, Ohio, Pennsylvania, Rhode Island, Vermont, West Virginia, Wisconsin, and the District of Columbia.The DIR states in part, ...the strut housing may crack and pull away from the inner hood ledge assembly.This could lead to the strut housing panel separating and contacting the steering column lower shaft.Contact with the steering column lower shaft can cause steering difficulties and may require an increase in steering effort by the driver.If the steering column lower shaft completely fractured it would result in a total loss of steering control.In some cases, the strut housing panel can contact or affect adjacent brake system components.Complainants reported experiencing either steering or brake system issues, and in some cases, both.Nissan dealer's will inspect the strut housing and, based on the level of corrosion found, make an assessment as to how to remedy the vehicle (see defect information report for additional details). Brake system components adjacent to, and in the area of, the strut tower (i.e., brake master cylinder, left front brake line, ABS wire harness, etc.) will also be inspected.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11002539INTELLIGENT KEY NOT DETECTED / ENGINE WILL NOT START This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001182WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001179REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 11001177WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232646REMOVING FOREIGN MATERIAL FROM THE WINDOW GLASS This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232645WHEEL BEARING COLLISION DAMAGE This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10232644WINDSHIELD CRACKING This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10192802SERVICE INFORMATION Because of collision damage or other vehicle repair, a replacement "Certification Label" or "VIN Plate / Label" may be needed. These items may be available from Infiniti by request if certain criteria are met. This bulletinlists the criteria and provides an application form for such replacements. See this bulletin for further detail.
- 10192693SERVICE INFORMATION Windshield "foreign material" that is on the surface of the glass in some cases can be cleaned off with a very particular type and grade of steel wool. * Most any foreign material on the surface of the Windshield can be cleaned off by using #0000 super fine steel wool. >The #0000 grade super fine steel wool can be found in most hardware stores. Please see this bulleitn for further details.
- 10192514SERVICE INFORMATION Changes or modifications to the front seat assembly trim materials may affect the proper operation of the Front Seat-Mounted Side-Impact Supplemental Air Bags and Passenger Occupant Classification Sensor and could result in serious personal injury or death. Infiniti STRONGLY RECOMMENDS AGAINST making any change to seat trim materials from the factory equipped condition. This specifically applies to replacing the seat trim with non-factory materials; adding leather/cloth seat covers, seat pads, or seat storage pouches, etc. around or over the seat back and the passenger seat cushion. See this bulletin for further detail.
- 10192505SERVICE INFORMATION Two methods are used to update/upgrade Navigation Map Data: 1. The customer goes to www.infinitinavigation.com and is mailed update disc(s) or SD card and installs data, OR 2. The dealership is mailed update disc(s) and the customer must visit the dealership to have data installed. Use the matrix in this bulletin to determine which method is utilized for each Applied Vehicle. See this bulletin for further detail.
- 10192314SERVICE INFORMATION Information necessary to service the Supplemental Restraint System (SRS) safely is included in the "RESTRAINTS" section of the Electronic Service Manual (ESM) for each vehicle IMPORTANT: Turn the ignition switch OFF, disconnect both battery terminals, and wait at least 3 minutes before performing any service on the SRS. See this bulletin for further detail.
- 10192290Infiniti is conducting a voluntary safety recall campaign on certain model year 1997 - 2003 QX4 vehicles that are currently registered in Salt States to inspect for corrosion, and if necessary repair the front strut housing panels. In addition to the recall campaign, in the interest of customer satisfaction, owners of similar vehicles that are not subject to the recall because they were originally sold in and are registered in States where corrosion is unlikely to occur will receive a courtesy notification and will be offered an opportunity to have their vehicles inspected at no charge. If necessary, the vehicles will also be remedied free of charge. See this bulletin for further detail. Campaign ID#: R1110 NHTSA #: 11V-244
- 10192235Infiniti Original Equipment or Genuine Accessory Alloy wheels, along with their finish coating (clear, chrome, titanium, etc.), are specifically developed to achieve Infiniti design and performance standards. These Original Equipment or Genuine Accessory wheels are subjected to testing to ensure they meet Infiniti's standards. Infiniti Original Equipment Alloy or Genuine Accessory wheels subjected to aftermarket chroming may no longer continue to meet these standards and may be seriously damaged. Therefore, Infiniti most strongly discourages, and recommends that these wheels NEVER be subjected to, aftermarket chroming. See this bulletin for further details.
- 10192219SERVICE INFORMATION - This bulletin is to assist you in responding to customer questions about brake operation, and provides diagnostic and repair information for each item listed, if any should occur. - Most brake issues fall into the following categories: a. Brake Noise: A squeak, squeal, clunk, or groan that occurs when the brakes are applied or released. b. Brake Judder: A vibration that can be felt in the vehicle, steering wheel, or brake pedal when the brakes are applied. c. Pedal Feel: The effort needed to operate the brakes is too high or too low. SERVICE PROCEDURE 1. Verify the condition by road testing the vehicle with the customer. 2. Determine the specific brake issue based on the description in the Service Information above. 3. Follow the appropriate repair procedure(s), listed on the following pages, for your specific issue. See this bulletin for further details.
- 10192218If YOU CONFIRM: A vehicle needs to have the brake rotors resurfaced (front or rear). ACTION: Use the ProCut PFM Series on-car brake lathe to perform brake rotor resurfacing and follow the tips listed in this bulletin. - The ProCut PFM Series brake lathe has been chosen as the approved tool for rotor resurfacing. - The ProCut PFM Series brake lathe can be ordered from TECH-MATE at 1-800-662-2001. - ProCut technical support or service can be obtained by calling 1-800-543-6618. NOTE: Brake rotors may need to be resurfaced during routine brake repair or for brake "judder" incidents. - Brake judder: A brake pedal pulsation and/or steering wheel shimmy when braking that occurs when there is too much thickness variation of the brake rotors (see ITB00-024). See this bulletin for further detail.
- 10192191As part of an enhanced emissions test for Inspection & Maintenance (I/M), some States may require the System Readiness Test (SRT) status be checked. - The SRT is used to indicate whether the engine control module (ECM) has completed self diagnosis of major emissions systems and components. - In these instances the State may require completion of the SRT before permitting the emissions inspection to proceed. Refer to this Bulletin for further details.
- 10192146SERVICE INFORMATION This bulletin provides information to identify: - A leaking strut or a shock absorber that qualifies for replacement under warranty. - A strut or shock absorber that has slight oil seepage, a condition which is considered normal, does not affect strut/shock absorber operation or performance, and does not require replacement. - A strut or shock absorber that should be replaced due to rod resistance/noise issues. See this bulletin for further detail.
- 10190150INFINITI; FRONT SONAR PARKING SENSOR SERVICE INFORMATION This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10190026NAVIGATION MAP DATA UPDATE MATRIX This bulletin has been amended. See AMENDMENT HISTORY on the last page. Please discard previous versions of this bulletin.
- 10183902The information below has been updated to include the INFINITI specific mail volume.
- 10183901Subject: INFORMATION Takata Recall - Owner Re-notification via UPS and U.S. Mail Details Summary: Starting this week INFINITI is initiating a special delivery re-notification mailing to owners affected by the Takata recall. These 125,383 mailings will occur via United Parcel Service in a UPS Ground envelope and a label with the words URGENT SAFETY RECALL in red. Owners residing in Alaska, Hawaii, or using a P.O. Box as their primary address will receive a certified proof of delivery mail from the postal service. Because of COVID-19 recommended practices, owner signatures will be waived, but the special delivery is intended to capture owners attention and signal the importance of this repair. These re-notifications, in English and Spanish, will urge clients to contact their retailer for a free recall remedy as soon as possible! INFINITI expects this targeted outreach activity to motivate a higher percentage of clients to complete the Takata recall. Similar initiatives for other manufacturers have seen a significant jump in response rates and completed repairs in the following weeks. We need retailer support to make this effort successful! This notice is being sent to make retailers aware of this mailing initiative so they can prepare their staff to help drive completions, consider any additional outreach, and respond to any questions that arise regarding the legitimacy and urgency of the special notification. What Retailers Should Do: 1.Retailers should stock the necessary parts and make efforts to support the repairs as quickly as possible. INFINITI requests same day or week appointments as much as possible and offer Takata recall services on weekends too if your service department is open. 2.If possible, offer mobile service. Each mobile repair is eligible for $100 incentive on top of parts and labor. Refer to Takata campaign announcements for additional details.
- 10183900INFINITI Owner Letter
- 10160176EXTERIOR CLEANING INFORMATION SERVICE INFORMATION When cleaning the exterior of an Infiniti vehicle, damage may occur when using a cleaner with too high of an alkaline concentration. - Always refer to the Appearance and care section of the related owner?s manual. - Not all cleaners are created equal. - Many cleaners come in concentrated form. - Alkaline cleaners (cleaners with a high pH value) can cause spots on paint and trim when not used as directed. - Some commercial car washes use cleaners with a high pH value. - When using cleaners that meet the conditions defined in the Appearance and care section, be sure to carefully follow the cleaner?s directions. - When finished cleaning/washing, rinse thoroughly with clean water. IMPORTANT: Damage to paint, glass, bright metal, or any other exterior surface caused by using improper cleaning products is not covered under warranty. Always refer to the Paint Incident Identification Manual (PIIM) and Assurance Products Reference Manual (APRM). Follow the guidelines in the PIIM and APRM for non-warrantable exterior body, glass, or painted surface quality issues. To access the PIIM and APRM, login to nnanet.com: - For the PIIM, select: MY LINKS > Warranty > Paint Incident Identification Manual - For the APRM, select: MY DOCUMENTS > Warranty > APRM See further information in this bulletin.
- 10152986Subject: Takata Completion Objectives for Q4 INFINITI is continuing to ask its retailers to urgently help increase customer participation in the Takata recalls to help it achieve 100% customer recall participation for the following vehicles: - 2001 I30 - 2002-04 I35 - 2003-08 FX - 2002-03 QX4 - 2006-10 M Sedan INFINITI expects to upload the next refreshed owner list to DBS around the middle of February. At the time of monthly updates, we reassign owner lists based on retailer buy/sells. We anticipate having this automated within DBS by the end of the fiscal year. This is an extremely serious safety issue and INFINITI is taking significant and unprecedented steps to increase client recall participation but it needs retailer help to achieve its remedy goals. A separate communication will be released later this week informing regional personnel of the requirements for bonus payout in Q4. The Q4 objective is based on the average number of repairs in Q3 multiplied by the number of service days in Q4 (Mon-Sat minus any holidays). Retailer engagement is critical with this effort. It is a company-wide responsibility to make it a priority to replace these dangerous airbag inflators in affected vehicles. Further, increasing recall participation represents significant gross profit opportunity for our retailers. Regional personnel can access current completions via the tableau Takata tracker (https://tableau.na.nissan.biz/#/site/SLSMKG/views/TakataCampaignReport/TakataCampaign?:iid=1). Q4 objectives will be updated in the tableau Takata tracker by the end of the week, but current overall completion rates are included above.
- 10152500Retailer Engagement for Takata Awareness INFINITI is committed to the safety and security of its clients and their passengers. As you are likely aware, INFINITI has initiated multiple field actions to execute the Takata Airbag Recall in accordance with the schedule set by the National Highway Traffic Safety Administration (NHTSA). INFINITI has employed a variety of methods to reach affected clients to increase repair completion. However, your help is needed to raise awareness to remedy the approximately one hundred twenty thousand vehicles that remain unrepaired. This is a serious issue and we need everyone?s help to further increase recall awareness. INFINITI is asking all retailers to provide their employees with instructions on how to identify vehicles affected by the Takata airbag recall and encourage them to help draw an affected owner?s attention to this danger. Your employee?s actions could save someone?s life or prevent a significant injury. Supporting Materials To assist with this request, each retailer will receive thirty ?Takata Airbag Recall Alert Cards? by December 5, 2018. Each ?Alert Card? has eight (8) individual tear off cards (written in English and Spanish) that can be distributed to owners to make them aware of how to check their vehicle for an open Takata recall, and of the importance of having the repair performed. To facilitate identification of affected vehicles, your employees can download the free Airbag Recall App from the App Store or Google Play. This app will work for any brand vehicle affected by the Takata recall, and will inform your employees if any of the affected vehicles listed below have an open Takata recall. Affected Vehicles: - INFINITI: - 2001 I30 - 2002-2004 I35 - 2002-2003 QX4 - 2003-2008 FX35/45 - 2006-2010 M35/45 - NISSAN: - 2001-2003 Maxima - 2002-2004 Pathfinder - 2002-2006 Sentra - 2007-2011 Versa Sedan - 2007-2012 Versa Hatchback
- 10149809PLASTIC INTERIOR TRIM PROTECTIVE COVERING REMOVAL SERVICE INFORMATION Vehicles are delivered with plastic interior trim protective covering on the front and rear seats, front and rear door panel finishers, steering wheel, and sun visors (see examples on page 2). When removing the protective covering, care must be used to avoid scuffs, scrapes, cuts, and other abrasive contact to interior trim components. DO NOT use sharp objects like razor blades, box cutters, knives, etc. when removing the plastic interior trim protective covering. IMPORTANT: All soft trim described in this bulletin is on automatic return to NNA. Any trim found damaged in the way described in this bulletin will be charged back to the dealer.
- 10149806TRANSMISSION & ENGINE AUTOMATED DATA COLLECTION AND DIAGNOSTIC REPORTING SERVICE INFORMATION To support proper diagnosis and to promote Fixed-Right-First-Time ? Infiniti may review CONSULT-III plus (CIII plus) data relating to vehicle operation and function to help with vehicle diagnosis and diagnostic validation. IMPORTANT: For transmission/engine repair or replacement, retailers are required to connect C-III plus and perform ?Diagnosis (All Systems)?. Performing C-III plus ?Diagnosis (All Systems)? is also required prior to contacting any Infiniti call center (i.e. TECH-LINE, PCC, or WCC) for diagnostic support or claim preauthorization. NOTE: For additional information regarding Automated Vehicle Data Collection, refer to IWBI/18-019. To support Automated Vehicle Data Collection, your C-III plus must have the Diagnosis result reporting function-Setting turned ON. If Diagnosis result reporting function-Setting is OFF: - It may cause dealer consideration for Audit or the Anomalous Repair Control (ARC) program, where applicable. - It may result in a repair being non-warrantable. Refer to the Service Procedure on the next page to confirm your C-III plus ?Diagnosis result reporting function-Setting? is turned ON.
- 10149803Infiniti USA Electronic Field Communication Subject: Takata Completion Objectives for Q3 INFINITI is continuing to ask its retailers to urgently help increase customer participation in the Takata recalls to help it achieve 100% customer recall participation for the following vehicles: ? 2001 I30 ? 2002-04 I35 ? 2003-08 FX ? 2002-03 QX4 ? 2006-10 M Sedan INFINITI expects to upload the next refreshed owner list to DBS within the next week. We will also be reassigning VINs to retailers based on information changes. We didn?t reassign any VINs in Q2 to avoid any mid-quarter objective impact. If VINs were repaired out of network, the retailer/region with the original assignment received credit for the repair. This is an extremely serious safety issue and INFINITI is taking significant and unprecedented steps to increase client recall participation but it needs retailer help to achieve its remedy goals. A separate communication will be released later this month informing regional personnel of the requirements for bonus payout in Q3 and Q2 results. The Q3 objective is based on the average number of repairs in Q2 multiplied by the number of service days in Q3 (Mon-Sat minus any holidays). Retailer engagement is critical with this effort. It is a company-wide responsibility to make it a priority to replace these dangerous airbag inflators in affected vehicles. Further, increasing recall participation represents significant gross profit opportunity for our retailers.
- 10149802Infiniti USA Electronic Field Communication Subject: Retailed Vehicle Open Campaign Report Lists Updated The lists for each retailer?s Retailed Vehicle Open Campaign Report has been updated today in DBS. We made our best effort to reassign vehicles to retailers based on the most recent owner information we received. The complexity of filtering out brokers (banks, salvage yards, and insurance companies) and reassigning VINs based on updated owner information affected over 123K records between INFINITI and Nissan, so we are unable to summarize the changes at a regional or retailer level. We suggest the retailers download their lists and have their outbound call centers compare information if necessary. If you have questions, please let us know. Additionally, we will have some enhancements coming in DBS effective November 17, 2018: Owner Data Updates (NNA side): 1. VIN, Campaign Code, and Source are the unique fields 2. Compare all fields except Remove Flag and Comments to see if there is a difference. a. If there is same VIN, Camp ID, and Source and all other fields are also the same then the record will be updated without changing Remove Flag and Comment field b. If there is same VIN, Camp ID, and Source and any other field is different, then the record will be inserted, in this case Remove Flag and Comment field will be blank as this is new record. The remove flag is being removed so the retailer will understand the information they previously flagged for removal has been updated and should be tried again before reapplying the removal flag. c. The retailer benefit of A & B above is duplicate records for the same VIN, Camp ID, and information source with the same customer contact information will no longer display in DBS on the Retailed Vehicle Open Campaign Report.
- 10148769Free Oil Change Specific Vehicles Subject to the Takata Recall ***** Detailed Information ***** To help accelerate repair completions on specific populations of vehicles recalled for the Takata airbag, INFINITI is offering a special incentive for certain populations of affected vehicles for a limited time. The expiration date for this offer is December 31, 2018. INFINITI is offering a complimentary oil change for participating customers free of charge. INFINITI Consumer Affairs will be outreaching to these eligible owners directly, but retailers may also offer this incentive to eligible owners found on your retailed vehicle open campaign report if their VIN has PC654 applied in Service Comm or DBS National Service History ? Open Campaign. ***** What Retailers Should Do ***** 1. Retailers should verify if vehicles are eligible for this complimentary oil change using Service Comm or DBS National Service History ? Open Campaign I.D. PC654. - The free oil change should only be performed if the Takata recall campaign has been performed first or at the same time as the oil change. NOTE: Clients should be informed that this free oil change offer is time-limited. Owners may redeem this free oil change offer at any point from the date of Takata repair until December 31, 2018. SERVICE COMM will be deactivated and the offer expires on January 1, 2019. 2. The service department should submit the free oil change offer and Takata recall repairs as two separate campaign repair claims. Once the oil change claim has been submitted and paid, the offer will no longer display in Service Comm.
- 10145541DBS Enhancement: Retailed Vehicle Open Campaign Report INFINITI announced the availability of a new DBS enhancement tool to the Service > Campaign screen: Retailed Vehicle Open Campaign Report on July 9, 2018, which identifies owner contact information for specific campaigns. Currently, only Takata campaign owner lists are available. The following personnel will have access to this tool: - Retailer: Dealer Principal, Executive Managers, General Managers, Parts/Service Managers, and/or Parts/Service Directors - Regions: Regional Aftersales Manager (RAM), Regional Operations Managers (ROM), Fixed Operations Manager (FOM), Dealer Operation Managers (DOM), Regional Service Operation Managers (RSOM), and Client Experience Managers (CEM) The report can be viewed on screen or exported to Microsoft Excel and identifies the following: - VIN - Campaign ID & Campaign Description - Model & Model Year - Data Source o Up to three data sources can be provided for each VIN - RO Info: If this VIN has visited an Infiniti retailer anywhere in the U.S. within the last twelve months, the RO information will be displayed. - Campaign Mailing List: This is DMV data for the VIN listed - Marketing List: If an owner is on your marketing list, their contact information from that list will be displayed here. DMV data is not used for marketing list owner information. - Contact Name - Last Name/First Name & Address (City, State, Zip) - Phone (1-3) & Email (1-3) - Remove Flag o This defaults to ?N? unless the retailer or INFINITI USA flags this VIN for removal. o The removed information will still show on the DBS screen and exported report, but can be filtered on the exported file to only display the records with ?N? in this column.
- 10145053OBD II EVAP Tube Warranty Enhancement UPDATE August 17, 2018 Please discard earlier versions of this bulletin. The announcement from March 21, 2017 has been revised to include: - Clarification that the refueling concern is extremely hard to fill, not intermittent, and occurs at multiple fueling stations and fuel pumps - Customer expense may be applicable if the vehicle is out of warranty
- 10145052OBD II EVAP Tube Warranty Enhancement UPDATE August 17, 2018 Please discard earlier versions of this bulletin The announcement from March 21, 2017 has been revised to include: o Clarification that the refueling concern is extremely hard to fill, not intermittent, and occurs at multiple fueling stations and fuel pumps o Client expense may be applicable if the vehicle is out of warranty
- 10144484NEW PAINT GUARD FILM REMOVAL INFORMATION This bulletin applies only to new, unsold vehicles with Paint Guard Film in Dealer Stock. This bulletin has been amended. The publication date has been revised to include the latest models and model years. No other changes have been made. Please discard previous versions of this bulletin.
- 10136636DBS Enhancement: Custom VIN Campaign Report INFINITI is pleased to announce the availability of a new DBS enhancement to the Service > Campaign screen: Custom VIN Campaign Report. The tool identifies open campaigns on a customized VIN list loaded into DBS for INFINITI and Nissan vehicles. The following personnel will have access to this tool: - Retailer: Executive Managers, Service Managers, and/or Service Directors - Regions: Regional Aftersales Manager (RAM), Area General Manager (AGM), Fixed Operations Manager (FOM), Regional Service Operation Managers (RSOM), and Retailer Technical Specialist (DTS) The VINS can be loaded individually or up to 10,000 VINs at a time. If you have more than 10,000 VINs, each incremental VIN file of 10,000 or less VINs will need to be loaded prior to selecting the Check For Open Campaigns option. The report can be viewed on screen or exported to Microsoft Excel and will identify the following for each VIN loaded into the tool: - Open Campaigns (ID and description) - Model Code, Model, and Model Year - Current Repair Status Blank: Repair order (RO) has not been opened yet Unrepaired: RO has been opened for the campaign, but not closed or submitted o Repaired: RO for the campaign has been closed and a warranty claim has been submitted - Current Claim Status o Blank: RO still open o Unsubmitted: A warranty claim for the campaign repair has not been submitted o Submitted: A RO has been closed and a campaign warranty claim has been submitted for payment o Suspended: The campaign warranty claim has suspended for one or more errors o Rejected: The campaign warranty claim has been denied for some reason (by retailer or NNA) o Paid: A campaign warranty claim has been submitted and paid by NNA, but the vehicle has not yet been removed from the NNA open campaign vehicle table - Stop Sale Applicability - Parts Restriction Applicability (If restricted, SVC order must be used to acquire parts)
- 10129111REDUCED VEHICLE LOAD CAPACITY LABEL (REGULATORY REQUIREMENT) This bulletin applies to vehicles equipped with dealer installed or VPC installed accessories. SERVICE INFORMATION The National Highway Traffic Safety Administration (NHTSA) requires that any automobile dealer that installs accessories on a vehicle prior to first retail sale must install a special label (?reduced capacity label?) on that vehicle if the total weight of all accessories on that vehicle exceeds 1.5 percent of the vehicle?s gross vehicle weight rating (GVWR) or 100 pounds, whichever is less. This includes accessories that the dealer installs (dealer installed factory accessories and dealer installed aftermarket accessories), and accessories installed at the Vehicle Processing Center (VPC) prior to the vehicle being delivered to the dealer. IMPORTANT: Failure to comply with this requirement may result in penalties imposed by NHTSA. Follow the instructions in this bulletin to help meet these requirements.
- 10127465WINDOW GLASS WARRANTY INFORMATION This bulletin has been amended to apply to the latest models and model years, and warranty information on page 2 has been updated. No other changes have been made. Please discard previous versions of this bulletin.
- 10127462WINDSHIELD CRACKING This bulletin has been amended to apply to the latest models and model years. Also, warranty information on pages 1 and 8 has been updated. No other changes have been made. Please discard previous versions of this bulletin.
- 10127461BRAKE NOISE/JUDDER/PEDAL FEEL DIAGNOSIS AND REPAIR This bulletin has been amended to include vehicles built up to the publication date. Also, tips for using the ProCut? brake lathe were added on page 8, and a Brake Noise Diagnostic Worksheet was added on page 10. Please discard previous versions of this bulletin.
Every Infiniti QX4 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.