2005 International 4400
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › International › 4400 › 2005
These records cover every 2005 International 4400. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
4 recalls name the 2005 International 4400. Newest first.
Navistar, Inc. (Navistar) is recalling certain 2000-2003 International 8100, 2001-2003 International 9100i, 2001-2007 International 9400i, 2001-2010 International 9200i, 2002-2007, 2009 International 8500, 2003-2007, 2013 International 9900i, 2003-2018 International 8600, 2004, 2007 International 9900iX, 2008-2018 International ProStar, 2010-2011, 2013…
Risk and remedy
Risk
Low visibility or obstructed back up lights may not alert other drivers that the vehicle is backing up, increasing the risk of a crash.
Remedy
Dealers will replace the existing rear stop/turn signal lights, free of charge. Owner notification letters were mailed May 06, 2024. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23514.
Certain my 2005 through 2006 international heavy trucks and ic corp ce school buses manufactured between june 4, 2004, and march 31, 2005. the anchor bolt that IS the pivot point for the driveline parking brake shoes may fatigue and break as a result of an incorrect surface treatment.
Risk and remedy
Risk
If the bolt breaks, the park brake may not engage. this could cause the vehicle to roll away without warning and could result in a vehicle crash, possibly resulting in property damage, personal injury, or death.
Remedy
International recall no. 00518. international will notify owner and replace the affected anchor bolts free of charge. the recall began on october 14, 2005. customers may contact international at 1-800-448-7825.
On certain trucks, the bolts that mount the front of the cab to the mounting brackets were not properly torqued at the manufacturing plant.
Risk and remedy
Risk
These bolts can loosen during normal vehicle use and fall out. this may lead to the cab separating from the vehicle's chassis during a vehicle crash that may result in property damage, personal injury or death.
Remedy
As an interim action, dealers will properly tighten the existing cab mounting bolts and replace any missing bolts. as soon as parts are available, dealers will replace all sixteen bolts and tighten them properly. an interim letter was sent to owners on february 11, 2005. another letter was sent to owners on april 8, 2005, as soon as parts are available. owners should contact international at 1-800-448-7825.
On certain trucks built with iros rear air suspension systems, four rear suspension fasteners may not be tightened sufficiently. this hardware connects the main support members of the rear suspension to the hanger brackets.
Risk and remedy
Risk
This connection could fail if the nuts worked their way loose or off, or the bolts broke from fatigue. a failure of these fasteners could result in separation of the main support from the hanger bracket possibly resulting in a sudden loss of control of the vehicle, which could result in a crash.
Remedy
Dealers will replace all four bolts and tighten the bolts properly. the recall began on november 5, 2004. owners should contact international at 1-800-448-7825.
Owner complaints
1 complaints
What owners report most
Latest complaints
- Electrical system · Engine and engine cooling › Engine › Diesel
TL* the contact owns a 2005 international 4400 truck. The contact stated that the vehicle would stall sporadically and without warning. The vehicle was taken to the dealer where the contact was advised that the positive side cable wire needed to be replaced. the dealer also advised that the…
TL* the contact owns a 2005 international 4400 truck. The contact stated that the vehicle would stall sporadically and without warning. The vehicle was taken to the dealer where the contact was advised that the positive side cable wire needed to be replaced. the dealer also advised that the failure would likely recur because of corrosive fumes that were emitted from the battery. The failure and the current mileages were 110,118. updated 10/11/12
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010428This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean.
- 10251414Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine.
- 10251409Suggested alignment target values when performing a vehicle axle alignment.
- 10246231J1939 Data Link Source Address Information
- 10243610How to request a horsepower quote; all International and Cummins engines
- 10243595Diagnosis of chassis wander complaints.
- 10234000Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI engines or Cummins ISB engine with Allison transmissions
- 10227455J1939 Data link source address information
- 10219330PicoScope Test One Channel RCT
- 10219325PicoScope Test Resistance and Ohmmeter
- 10219319PicoScope Test for Datalink (CAN) Health Shorts & opens
- 10219314PicoScope Test - Battery Loss of Charge - Parasitic Draw Test
- 10209487Calculating pulses per mile (speedometer setting); only models equipped with International engines
- 10208431J1939 Data Link Source Address Information
- 10204139Power Steering Diagnostics Flow / Pressure Specifications For Power Steering Gears and Power Steering Pumps
- 10204137J1939 Data Link Troubleshooting
- 10204134WABCO Full Power Brake Diagnostic Code (DTC) Index
- 10201758Engine Oil Capacities. All International electronic engines 1994 to present and Cummins ISB, ISM, or ISX engines
- 10199915General wheel speed sensor troubleshooting
- 10198708Aftertreatment Clamp Corrosion; Single Can Aftertreatment Systems
- 10189743Suggested alignment target values when performing a vehicle axle alignment
- 10189741Frame Rail Straightness Inspection Procedure
- 10181960Cab Lean Concern
- 10179296Codes 141, 142, and 621 in a 2-box ECM/IDM; only models with 2-box ECM/IDM from 2003-2007
- 10179294Driveline Information Center and Troubleshooting Procedures
- 10179289Repair Procedures for Vehicles Struck by Lightning
- 10177096A/C Refrigerant and Oil Capacities
- 10173025Cleaning and Disinfecting Trucks and Buses
- 10172045J1939 Data Link Troubleshooting
- 10170952Bendix EC80 Blank Module Replacement Program; This document will guide the user through selecting the correct ABS module when it has been determined a replacement is needed. Only Models with EC-80 ABS Controller
- 10169879Key Codes and Key Cutting Information (Not for CV Series)
- 10165643Oil Capacities; All Electronic International Engines 1994 - Present. Cummins ISB, ISM & ISX
- 10163416Suspension Lean Diagnostics; All models
- 10162034J1939 Data Link Source Address Information
- 10160941Suggested alignment target values when performing a vehicle axle alignment
- 10156576Engine Emission Label Replacement, Certificate of Conformance and Clean Idle Sticker Addition Procedure
- 10156324Driveline Information Center and Troubleshooting Procedures
- 10156305Tool Instruction - BCM Programming Harness
- 10145721A/C Refrigerant and Oil Capacities
- 10145715Engine Oil Capacities All Electronic International Engines 1994 - Present. Cummins ISB, ISM & ISX
Every International 4400 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.