2011 International 4400
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › International › 4400 › 2011
These records cover every 2011 International 4400. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2011 International 4400. Newest first.
Navistar, Inc. (Navistar) is recalling certain 2000-2003 International 8100, 2001-2003 International 9100i, 2001-2007 International 9400i, 2001-2010 International 9200i, 2002-2007, 2009 International 8500, 2003-2007, 2013 International 9900i, 2003-2018 International 8600, 2004, 2007 International 9900iX, 2008-2018 International ProStar, 2010-2011, 2013…
Risk and remedy
Risk
Low visibility or obstructed back up lights may not alert other drivers that the vehicle is backing up, increasing the risk of a crash.
Remedy
Dealers will replace the existing rear stop/turn signal lights, free of charge. Owner notification letters were mailed May 06, 2024. Owners may contact Navistar's customer service at 1-800-448-7825. Navistar's number for this recall is 23514.
Navistar IS recalling certain model year 2011 international commercial trucks models 4300 and 4400 and 2011 ic bus models ce and hc commercial buses manufactured from february 25, 2010, through september 20, 2010. the engine turbo oil supply line may rub on the frame rail possibly causing an oil leak in the engine compartment.
Risk and remedy
Risk
An oil leak in the engine compartment may cause a fire.
Remedy
Navistar will notify owners and international dealers will repair the buses free of charge. the safety recall IS expected to begin on or about january 14, 2011. owners may contact navistar 1-800-448-7825.
Navistar has notified nhtsa of a defect on certain model year 2008-2011 international trucks equipped with an optional jump start stud. corrosion at the base of the stud may cause an electrical short between the stud and battery box.
Risk and remedy
Risk
An electrical short may cause a vehicle fire.
Remedy
A final remedy has been established. navistar will notify owners, and dealers will repair the vehicles by installing a new jump start stud. repairs will be preformed free of charge. an interim action will involve the removal of the jump start stud and the connecting cable. the safety recall began on september 10, 2010. owners may contact international dealers at 1-800-448-7825.
Owner complaints
1 complaints
Latest complaints
- Suspension
On 19 june 2012,, we received information from our ambulance manafacture sales represenative on a safety concern of another ambulance service in the area that reported a failure of the bushings for the torque arms on their 2011 international navastar 4300, which has less than 60,000 miles. Upon…
On 19 june 2012,, we received information from our ambulance manafacture sales represenative on a safety concern of another ambulance service in the area that reported a failure of the bushings for the torque arms on their 2011 international navastar 4300, which has less than 60,000 miles. Upon receiving this information I immediately took both of our 2011 international navistar 4400 and had them inspected at the international dealership and one of our two 2011 international navistar 4400 was noted that the left rear torque arm bushing had moved out away from the arm and was against the frame of the truck. *Tr
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010428This article addresses chassis lean conditions on all chassis. This does not include any diagnostics for body leans such as a cab lean. Keep in mind that a chassis lean may cause or accentuate a cab lean. Filling out the printable form and using the notes in blue will help you to determine the source of the lean and identify the action and parts required to correct the lean.
- 10253979This document is to guide users to eliminate brake pedal rattle noise.
- 10251414Starter Diagnostics and warranty claim procedure; all engines EXCLUDING Cummins ISB engine with Allison transmission or PSI engine.
- 10251409Suggested alignment target values when performing a vehicle axle alignment.
- 10246231J1939 Data Link Source Address Information
- 10243610How to request a horsepower quote; all International and Cummins engines
- 10243596General Wheel Speed Sensor Troubleshooting
- 10243595Diagnosis of chassis wander complaints.
- 10241555J1939 Data Link Source Address Information
- 10241554J1939 Data Link Troubleshooting
- 10234000Starter diagnostics and warranty claim procedure for all engines and all chassis EXCLUDING vehicles equipped with PSI engines or Cummins ISB engine with Allison transmissions
- 10227455J1939 Data link source address information
- 10222490Pico Scope CCOS (Crankcase Separator Test)
- 10219330PicoScope Test One Channel RCT
- 10219325PicoScope Test Resistance and Ohmmeter
- 10219319PicoScope Test for Datalink (CAN) Health Shorts & opens
- 10219314PicoScope Test - Battery Loss of Charge - Parasitic Draw Test
- 10209487Calculating pulses per mile (speedometer setting); only models equipped with International engines
- 10208432ECM Calibration for DPF Replacement; Applies to MaxxForce Engines
- 10208431J1939 Data Link Source Address Information
- 10204139Power Steering Diagnostics Flow / Pressure Specifications For Power Steering Gears and Power Steering Pumps
- 10204137J1939 Data Link Troubleshooting
- 10204136Dual Drive Cab Throttle Position Harness for APS/IVS throttle pedals; only models with both left hand and right hand drive.
- 10204134WABCO Full Power Brake Diagnostic Code (DTC) Index
- 10202873How to program parameters after changing WABCO FPB ECU (Parking brake shows N/A)
- 10201758Engine Oil Capacities. All International electronic engines 1994 to present and Cummins ISB, ISM, or ISX engines
- 10199915General wheel speed sensor troubleshooting
- 10198708Aftertreatment Clamp Corrosion; Single Can Aftertreatment Systems
- 10189743Suggested alignment target values when performing a vehicle axle alignment
- 10189741Frame Rail Straightness Inspection Procedure
- 10185108ECM Calibration for DPF Replacement; only trucks and busses built with 2007- 2009 MaxxForce DT/9/10. 2010-2012 MaxxForce DT/9/10, 2007-2009 MaxxForce V8, 2008-2009 MaxxForce 11/13 engines
- 10181960Cab Lean Concern
- 10179294Driveline Information Center and Troubleshooting Procedures
- 10179289Repair Procedures for Vehicles Struck by Lightning
- 10177870Ambient Air Temperature (AAT) Sensor Faults/Location/Diagnostics
- 10177096A/C Refrigerant and Oil Capacities
- 10173025Cleaning and Disinfecting Trucks and Buses
- 10172045J1939 Data Link Troubleshooting
- 10170952Bendix EC80 Blank Module Replacement Program; This document will guide the user through selecting the correct ABS module when it has been determined a replacement is needed. Only Models with EC-80 ABS Controller
- 10169879Key Codes and Key Cutting Information (Not for CV Series)
Every International 4400 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.