2005 Mercedes-Benz AMG E55
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mercedes-Benz › AMG E55 › 2005
These records cover every 2005 Mercedes-Benz AMG E55. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
3 recalls name the 2005 Mercedes-Benz AMG E55. Newest first.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please see the recall report for a complete list of models and model years. The glass sunroof panel may not be properly secured and can detach.
Risk and remedy
Risk
A detached sunroof panel can become a road hazard, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the sunroof panel as necessary, free of charge. Owner notification letters were mailed January 10, 2025. Owners may contact MBUSA customer service at 1-800-367-6372. This recall is an expansion of previous NHTSA recall number 22V-954. MBUSA's number for this recall is 2024120001/2/3.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2001-2011 C-Class, CLK, E-Class, and CLS vehicles. Please refer to MBUSA's recall report for specific vehicle model details. The glass sunroof panel may not be properly secured and may detach.
Risk and remedy
Risk
A detached sunroof panel may become a road hazard, increasing the risk of a crash.
Remedy
Dealers will inspect and replace the sunroof panel as necessary free of charge. Owner notification letters were mailed February 3, 2023. Owners may contact MBUSA customer service at 1-800-367-6372. This recall expands NHTSA recall number 19V-918. MBUSA's numbers for this recall are 2023010004, 2023010005, and 2023010006.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2001-2011 vehicles. The bonding between the glass panel and the sliding roof frame may deteriorate, possibly resulting in the glass panel detaching from the vehicle. For a full list of the affected models visit: https://static.nhtsa.gov/odi/rcl/2019/RMISC-19V918-4126.pdf
Risk and remedy
Risk
A detached glass panel can separate from the vehicle and become a road hazard, increasing the risk of a crash.
Remedy
MBUSA will notify owners, and dealers will inspect the glass panel bonding and replace the sliding roof, as necessary, free of charge. The recall began July 10, 2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020040011.
Owner complaints
132 complaints
What owners report most
Latest complaints
- Fuel/propulsion system
Fuel pump housing failed allowing gas to leak, further degrading parts of the fuel system, ultimately causing the locking ring to fail and gas to leak under rear passenger seat. Fumes filled the cabin while my family and I including two young children were inside. Fortunately, this issue was…
Fuel pump housing failed allowing gas to leak, further degrading parts of the fuel system, ultimately causing the locking ring to fail and gas to leak under rear passenger seat. Fumes filled the cabin while my family and I including two young children were inside. Fortunately, this issue was discovered rather quick, if not the fuel could have leaked onto the hot exhaust under the tank and ignited. I recently found this issue is well known in the Mercedes-Benz W211 chassis. You have multiple complaints on file. Mercedes had in fact issued an extended warranty of the fuel system however, it has since expired. The car provided no warning messages prior to failure. The car has yet to be inspected by the dealer, mechanic, or insurance.
- Fuel system, gasoline
The contact owns a 2005 Mercedes-Benz E55 AMG. The contact stated that after refueling the vehicle and arriving to the residence; the contact became aware that after parking the vehicle in the garage, there was an abnormally strong gasoline odor coming from the vehicle. Additionally, the contact…
The contact owns a 2005 Mercedes-Benz E55 AMG. The contact stated that after refueling the vehicle and arriving to the residence; the contact became aware that after parking the vehicle in the garage, there was an abnormally strong gasoline odor coming from the vehicle. Additionally, the contact saw fuel leaking from the fuel tank. No warning lights were illuminated. The vehicle was part of an Extended Warranty program however, the Extended Warranty Program had expired. The local dealer was contacted, but the vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 54,000.
- Fuel/propulsion system
Gas tank leak from under heat Shield Recall claims in 2012 it was extended for 15 years
- Service brakes
Mercedes benz of fort washington has denied a replacement of sbc unit and components under a safety recall. I lost brakes while driving. 'decreased brakes power' red message appeared
- Fuel/propulsion system
Sharp gas oder when entering the car cabin and driving
- Fuel/propulsion system
After filling vehicle gas tank, extremely strong fuel odor noticed in cabin and outside of vehicle. Smell existed both at standstill and at street speeds (40mph) with windows down or up. *tr
- Fuel/propulsion system
Strong gas odor around and inside the car
- Fuel/propulsion system
With a full tank of gas, gas leaked out of the top of the fuel tank where the fuel sender/filter IS located. The fuel wicked up the foam wrapped around the signal/ power wires, came between the access panel screwed to the floor and the floor. This IS the floor directly under the rear passenger…
With a full tank of gas, gas leaked out of the top of the fuel tank where the fuel sender/filter IS located. The fuel wicked up the foam wrapped around the signal/ power wires, came between the access panel screwed to the floor and the floor. This IS the floor directly under the rear passenger seat. The fuel soaked into the insulation below the rear passenger seat and the foam seat. This continues to occur at all times until the fuel level reaches approximately 3/4 of a tank.
- Fuel/propulsion system
Gasoline smell interior of the car. Gets worse with full gas tank. We have had it in the mercedes dealer 3 times for the problem and it IS not fixed.
- Fuel/propulsion system
I had filled my gas tank to full. While the vehicle was parked in my driveway, there was a leak by the drivers rear wheel. Smelled like gas. I found out this IS a recall from mercedes benz. "Check fuel filter module assembly and repair or replace if necessary" the emission recall campaign IS: 2008020001
- Fuel/propulsion system
Strong fuel smell after filling tank, drivers side fuel sending unit on drivers side of fuel tank leaking fuel. Noticeable cracks in corners of unit around fuel pressure sender.
- Fuel/propulsion system
Driver's side fuel/pump sender unit IS leaking fuel causing strong smell of gasoline inside of cabin and posing serious security risk to driver and passengers. After removing inspection cover from driver's side pump/sender unit, pooled fuel was observed on top of sending unit.
- Fuel/propulsion system
Fuel filter and sending unit leaking under rear seat. Both parts replaced. rear seat cushion saturated and required replacement due to strong fuel smell in vehicle. Vehicle service history shows same part replaced at 26,864 miles by previous owner. Same part replaced again at 69,383 miles with same leaking issue. *tr
- Fuel system, gasoline
Fuel smell inside and outside of vehicle. Inspected fuel pump inspection doors under backseat to find a pool of gasoline. *tr
- Fuel system, gasoline
Check engine light illuminated, code scan revealed code p0456. Inspection reveals fuel leakage at both the left fuel sender and the right fuel pump housings. Liquid fuel IS externally evident along with the associated smell of raw fuel vapor. this IS a very common problem with these vehicles and the manufacturer should be held responsible for repair of what IS a potentially dangerous issue. *tr
- Electrical system · Engine · Fuel system, gasoline
Vehicle has had a constant strong gas odor in car. Under extended warranty the vehicle has had... 2/8/08 left sending unit connect seize and crack replaced also fuel tank replaced. 4/23/08 fuel filter module assembly fuel filter replaced.10/7 +11/6odor continues. continue to bring in car…
Vehicle has had a constant strong gas odor in car. Under extended warranty the vehicle has had... 2/8/08 left sending unit connect seize and crack replaced also fuel tank replaced. 4/23/08 fuel filter module assembly fuel filter replaced.10/7 +11/6odor continues. continue to bring in car nothing happens 1/20 sending unit,sensor,seal rings replaced(seals leaking around pressure sensors. 2/2/10 odor continues 8/18 odor continues 7/22/11 replace leftsending unit.3/4/14 fuel tank and sensors recommended to be replaced by dealer at cost to myself. I have all dealer worksheets of this fuel leaking strong odor problem being a constant complaint. please help. *tr
- Electrical system · Fuel/propulsion system
I smelled a gas order that was progressively getting worse. I decided to pull the passenger seat to follow the smell and noticed a puddle of gas on top of my fuel pump sending unit. I decided to pull out the unit and noticed the unit was discolored around the connector terminals. I believe the…
I smelled a gas order that was progressively getting worse. I decided to pull the passenger seat to follow the smell and noticed a puddle of gas on top of my fuel pump sending unit. I decided to pull out the unit and noticed the unit was discolored around the connector terminals. I believe the terminal melted the sending unit causing the sending unit to leak fuel. I have this IS a very common problem with these cars, please help. *tr
- Fuel/propulsion system
I filled my tank with gas drove it home and parked it in my garage. later I went out to the garage and smelled a very strong odor of gas. I thought my husband might have left a container of gas in the garage. A couple of days later I went to a friends home in the country side and noticed an…
I filled my tank with gas drove it home and parked it in my garage. later I went out to the garage and smelled a very strong odor of gas. I thought my husband might have left a container of gas in the garage. A couple of days later I went to a friends home in the country side and noticed an intense smell of fuel in my car. I thought somehow maybe my husband transported gas in a container it the interior of the car, but he had not. I had to call road side assistance because on the return trip not only was the gas smell more intense, but I had a flat tire. immediately road side assistance came changed the tire and took us home and drove the car to the mb dealership. I paid for a new tank to be installed and they paid to remove the padding and liner and replace it from the seat behind the tank. from 2010 to 2014 three more events of fuel smell in and out of the car after filling the tank have since occurred and required repair. once it was said to be the lines or injection system. After the lines were repaired though the smell remained and this was solved by placing a new tank again in october 2012. The latest leak occurred just as the first, and on november 7, 2014 a new tank has not been placed yet. the interior of the car IS intolerably caustic with gas fumes. I am out of warranty and am driving an explosive time bomb filled with carcinogenic petroleum. these cars need a recall. I see I am not the only to submit a complaint for this dangerous hazard. the tank fuel leak for the s class and e class spanning 2003-2008 IS discussed on mercedes benz forums, as well. *tr
- Fuel/propulsion system
Topped the gas tank with gasoline on 11/02/14, only to find the smell of gasoline inside the vehicle. Later that same day my wife and kid noticed the smell as well and that made it a concern for me to find the problem. After a sniff test, I located a strong gasoline smell emitting from under the…
Topped the gas tank with gasoline on 11/02/14, only to find the smell of gasoline inside the vehicle. Later that same day my wife and kid noticed the smell as well and that made it a concern for me to find the problem. After a sniff test, I located a strong gasoline smell emitting from under the rear driver side seat. I detached the rear seat cushion and the cover plate that conceals the fuel sender unit. When I removed the cover plate, gasoline was sitting atop of the fuel sender unit and around the gas tank- fuel sender connection area. At this time the smell of gasoline was very strong and with the electrical wires that feed power to the fuel pressure sensor which sits atop/connected to the fuel sender unit makes for a very explosive situation. after drying the gasoline, I noticed a large number of small hair line cracks all around the top of the fuel sender unit. In the process of pricing fuel sender unit for replacement. *tr
- Fuel/propulsion system
Over the last few months I have noticed a significant smell of fuel whenever I get in and out of my E55. I had the dealer look it at during my last service a month ago and they said nothing was wrong... I have not noticed any fuel leaking from below the car. after viewing the hundreds of threads…
Over the last few months I have noticed a significant smell of fuel whenever I get in and out of my E55. I had the dealer look it at during my last service a month ago and they said nothing was wrong... I have not noticed any fuel leaking from below the car. after viewing the hundreds of threads and comments on the following 30 pages on a mercedes forum, I decided to have a look for myself: http://mbworld.org/forums/w211-amg/363759-urgent-notice-03-06-e55-s-were-involved-fuel-sender-recall-bombs.html when I took off the metal covers on top of the passenger side and driver side sending units I found fresh fuel on top of both units. the passenger was very little. the driver side was significant and squirting out from a plastic nipple that IS part of the sending unit. mercedes refuses to take care of this problem based on the 30+ pages found on the link above. your organization IS aware of this issue, there IS even a class action lawsuit against mbna. I will have my vehicle repaired at my own expense by my own mechanic because I don't have the patience to put up with an arrogant service advisor who will surely deny this IS was ever a problem on the W211 E55 mercedes. I think its time that your organization force mbusa/mbna to recall these vehicles. *tr
- Fuel/propulsion system
TL* the contact owns a 2005 mercedes benz E55. The contact stated that there was a strong odor of fuel present inside the vehicle. The vehicle was not diagnosed or repaired. The manufacturer was notified of the failure. The approximate failure mileage was 91,000.
- Fuel/propulsion system
Just found out my fuel sending units are leaking, strong gas smell coming from the rear drivers side wheel well.. hg motorsorts diagnosed, will be taking to acg automotive for second opinion.. *tr
- Fuel/propulsion system
Fuel leak in sending unit above gas tank. Very strong smell of gas in car and gas leaking in my garage. Took it to mercedes benz of colorado springs and it took three visits to fix the problem in 2009. Now 9/14/14 having the same problem with strong smell of fuel in the car and fuel leaking in the sending unit all the way to the foam of the back seat. *tr
- Fuel/propulsion system
After filling up the fuel tank...strong fuel odor inside the vehicle. *Tr
- Fuel system, gasoline
Existing issue nhtsa action number ea13003 fuel sender leakage already 116 reports on the e55amg model per the report. this will increase to 117. total cost to me quoted at $1300.00 in 2012 I paid approx. $2000.00 for a separate issue with the fuel system. I am the original owner of the car and have had all service performed by mercedes. *tr
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Fuel Leakage From The Fuel Tank
The Office of Defects Investigation (ODI) opened this investigation on January 23, 2012 as PE12-001 based on 20 consumer reports in model year (MY) 2003-2006 E55 AMG vehicles.Based on new reports in other E-Class vehicles, ODI upgraded the investigation to Engineering Analysis (EA) 13-003 on March 15, 2013, and…
The Office of Defects Investigation (ODI) opened this investigation on January 23, 2012 as PE12-001 based on 20 consumer reports in model year (MY) 2003-2006 E55 AMG vehicles.Based on new reports in other E-Class vehicles, ODI upgraded the investigation to Engineering Analysis (EA) 13-003 on March 15, 2013, and expanded the scope to all E-Class vehicles through MY 2008.The complainants alleged a strong odor of gasoline fuel both inside and outside of their vehicle, particularly after refilling the fuel tank.Many of the complainants noted that the odor subsided or went away after driving some distance thereby lowering the fuel level in the tank.Other owners reported they would only fill the tank to about three quarters full to avoid the odor altogether.Some complainants alleged fuel leaked from the fuel filter/sender, located on the top of the fuel tank on the driver's side, and collected on top of the tank.There were also allegations that the fuel leaks were associated with an Emissions Recall Campaign (No. 2008020001) conducted by Mercedes-Benz USA, LLC (Mercedes) in 2008 on MY 2003-2006 E-Class and CLS-Class AMG models.The issue in the recall involved small cracks in the pressurized outlet fitting of the fuel filter/sender.AMG vehicles are high performance models that operate at higher fuel pressure and use a different fuel filter/sender and fuel pump than non-AMG models.Information on Recall No. 2008020001 is available from the U.S. Environmental Protection Agency (EPA) website at www.EPA.gov.ODI's investigation found various leak sources that are unrelated to the outlet fitting cited in the EPA recall campaign.Through interviews with complainants, field inspections of complaint vehicles, and the collection and laboratory analysis of failed parts, three identifiable leak sources were found.The component parts and areas of the leaks involve the On-Board Diagnostic fuel tank pressure sensor (located on top of the fuel filter/sender), the outlet of the centrally mounted fuel tank fuel filling limiter valve, and the top of the fuel pump. These areas of leakage are located at the top of the fuel tank in unpressurized parts of the fuel system. When the tank is full, fuel can slowly weep/seep from micro-cracks in these components and may collect in cavities on top of the filter/sender, pump, or tank.Contrary to complainant's allegations that fuel entered the inside of their vehicle under the rear seat bench, neither ODI nor Mercedes found a plausible way for this to occur.The fuel tank is located outside of the passenger compartment, attached to the underside of the vehicle.The service access ports for the fuel filter/sender (driver's side) and fuel pump (passenger's side) are located under the rear seat bench, covered by a steel plate, sealed and bolted to the vehicle floor.When technicians service the fuel filter/sender, which has a regularly scheduled 60,000 mile service interval, and/or the fuel pump, the work is performed from inside the vehicle by working through the access ports.By letter dated September 4, 2014, Mercedes has notified the agency that it will extend the original warranty coverage to 15 years and unlimited mileage on Covered Fuel Tank Components in E-Class vehicles in MY 2003-2009 and CLS-Class vehicles in MY 2006-2011.The covered fuel tank components for the warranty extension include the fuel tank, fuel filter/sender, fuel pump, and all related gaskets/seals and retention rings.ODI is closing this investigation based on the manufacturer's extend warranty of the affected fuel system components and in consideration that the nature of the leaks does not appear to present an un
- Fuel System (Tank/Sender) Leakage
The Office of Defects Investigation (ODI) opened this investigation based on 20 consumer reports.All of the vehicles were E55 AMG models and the complainants alleged fuel leaks or a strong odor of gasoline both inside and outside of their vehicle, particularly after refueling.Some complainants alleged that the leaks…
The Office of Defects Investigation (ODI) opened this investigation based on 20 consumer reports.All of the vehicles were E55 AMG models and the complainants alleged fuel leaks or a strong odor of gasoline both inside and outside of their vehicle, particularly after refueling.Some complainants alleged that the leaks may be related to a 2008 Mercedes Benz emission recall (Campaign No. 2008020001) on the fuel filter module. This recall pertained to model years 2003-2006 E and CLS AMG models only.These AMG models use a different fuel pump and fuel filter module than the non-AMG E-class, however, they share other fuel system components, including the fuel tank.Since opening the investigation ODI has received an additional 350 reports relevant to this investigation.Of those reports, 116 reports are on the E55 AMG model.The remaining 234 reports are on other E-class models (i.e., E320, E350, E500, E550 and E63) which are now included in the scope of EA13-003.The investigation has been upgraded to Engineering Analysis, EA13-003, for further study.The ODI reports cited above can be reviewed at www-odi.nhtsa.dot.gov/owners/SearchNHTSAID under the identification (ODI) numbers cited on the following page.
- Driver Air Bag Circuit High Resistance
Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty…
Mercedes-Benz USA (MBUSA) has reported a high number of warranty claims for air bag warning lamp illumination due to a diagnostic fault code 9103 or 9123 indicating a high resistance in the driver's frontal air bag firing circuit.MBUSA's testing and evaluation have shown that this condition is the result of a faulty connector (specifically, improper wire crimp) but that it will not prevent proper deployment of the driver's frontal air bag.The faulty connector can cause the air bag circuit resistance levels to exceed the threshold that illuminates the air bag warning lamp, but they do not exceed a higher limit at which proper deployment of the air bag may no longer occur.The agency believes that further expenditure of agency resources does not appear to be warranted at this time.The closing of this investigation does not constitute a finding by NHTSA that no safety-related defect exists.The agency will monitor the issue and reserves the right to take future action if warranted by the circumstances.During the investigation, ODI learned that MBUSA will initiate a warranty extension program to address the faulty connectors in subject model year 2005 and 2006 E-Class and other MBUSA model/model year vehicles.This action will extend the warranty coverage for this issue to 10 years or 100,000 miles, whichever occurs first.MBUSA will notify all affected vehicle owners of this action.A bulletin describing this program is available in the investigative file.
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11009122Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer line by animal. 5. Seal on heating washer fluid reservoir/washer fluid reservoir. Remedy Replace defective component parts only. Do not replace any adjacent component parts that are intact. Note: Repair kits for washer line hoses do exist to allow patches for line damage.
- 11008323Complaint Headlamps fogged or droplets forming. Cause Due to its outlet openings, the headlamp is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate into the headlamp. This can lead to the formation of condensation on the lens of the headlamp. The headlamps comply with all applicable US standards and regulations. Remedy Check housing cover of lamp unit for natural fogging or condensation as per LI82.10-P-078301. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. Note: Order service covers and desiccant packs based on the validity description. 1. Remove headlamps. 2. Remove all grommets from outlet openings. 3. Seal vent openings with sealing profile. Important: All openings must be sealed carefully for the pressure compensation diaphragm to work properly! 4. Remove existing service cover. 5. Place desiccant packs into the new service covers and bolt down (Picture_01). 6. Glue the new diaphragm onto the intended surface at the service cover (Picture_02). Note: The bonding surface must be clean and dry. 7. Attach service cover with desiccant pack at headlamp. 8. Install headlamp. To ensure that the desiccant pack (absorption) acts effectively, the headlamp has to be air-sealed. Observe or check the following points for this: 1. Seals at the central connector must all be present and correctly fitted (Picture_03). 2. The new transparent diaphragm must be correctly bonded (Picture_04). 3. Check headlamp housing for any external damage.
- 11008091Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protruding material residues of the microphone cutout at the headliner, e.g. with a soldering iron. The microphone must be seated in the headliner as shown in picture "2". 4. Push microphone from behind until it is firmly pressed into the headliner 5. Maintain pressure and press/clip cap into microphone from the front. Note: The cover cap must be clearly heard and felt to engage. 6. This procedure must be carried out on both microphones (B25/20 and B25/21) Note: It is recommended to replace the cover caps. The non-woven cloth in the cover cap protects the microphone from soiling and must not be removed. NOTE: The information contained in this document is intended for use by trained, professional technicians with the knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz vehicles, using Mercedes-Benz approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes resulting in the same or similar symptoms or conditions described in this document, and trained professional service technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained in this document does not guarantee warranty coverage nor does it extend the vehicles warranty in any way.
- 11007974Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front Fog Lamps Leaking or Fogged". 1. Prepare headlamp/check for external damage: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for correct seating of the Gore-diaphragm/correct latching of the cover caps. 2. If the headlamp exhibits any external damage, replace the headlamp. For headlamps with an open system 1. Check the headlamps for any external damage and seal off the vent then make sure the cover caps are latched correctly into place. 2. If the headlamp exhibits any external damage, replace the headlamp. Note: A headlamp with external damage is not a warranty or goodwill case. 2. Leak test of headlamp with overpressure: Connect test adapter to pressure tester. (Figure 1) Check test adapter for leak tightness. To do so, connect plug and coupling (picture 2) and apply a maximum overpressure of 30 mbar. The pressure must remain constant. If the pressure does not remain constant, use a new adapter. Seal all the outlet openings using sealing compound and the given diaphragm with the plunger (picture 3). (Picture 4) Make allowance for the different headlamp variants here (there are different outlet openings). Check if the headlamp needs to be removed to gain access to the diagnostic socket on the headlamp housing. Plug the adapter onto the diagnostic socket on the headlamp housing. (Picture 5). Apply a maximum of 30 mbar overpressure to the headlamp housing. Note: If the maximum overpressure of 50 mbar is exceeded the headlamp seal will be damaged. If a pressure drop of less than 10 mbar is measured within 30 seconds, the headlamp is not leaky and the problem is down to natural physical fogging. If a pressure drop of more than 10 mbar is measured within 30 seconds, the headlamp is leaky. Note: The leaky position can be localized with the aid of soap suds. Replace any leaky headlamps. Note: Desiccant packs can be installed for headlamps that are not leaky. See: LI82.10-P-064766 Fogged headlamp, desiccant pack installed - open ventilation system LI82.10-P-078304 Fogged headlamp, desiccant pack installed - closed ventilation system
- 11007753Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 C/+64.4 F) and connect the exhaust extraction. Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the hood or trunk. 4. Switch on the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Clearing fogged/condensed halogen/xenon headlamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4F). Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine. 3. Open the hood. 4. Switch off the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Note: If there is no visible reduction in the formation of condensation, check the headlamp for a defect. (See Remedy 2) It is not physically possible to defog the headlamps completely. Fogging does not impair the operation or the service life of the headlamp. Remedy 2 A Damaged headlamp can be identified as follows: 1. Check the headlamp for external damage and that the cover caps and the diaphragm are correctly seated. 2. Check the electrical connectors of the plugs and pins. 3. Check for leak tightness in accordance with LI82.10-P-078307. The test can only be conducted on headlamps. 4. If the headlamp or the rear lamp has any external damage, replace the component part in accordance with the WIS instructions. Note: External damage to the headlamp/rear lamp or faulty seating of the cover caps does not present a warranty or goodwill case. With headlamps, it is possible to install desiccant packs if the problem occurs repeatedly. Open ventilation system: LI82.10-P-064766. Closed ventilation system LI82.10-P-078304
- 11005294Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress).
- 10252770As previously reported, to enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a Settlement regarding claims relating to allegations that the 590 Mars Red paint available as an original, exterior color option for certain models of Mercedes-Benz vehicles may experience peeling, flaking, or bubbling of the exterior paint or clear coat. This Mars Red paint is sometimes referred to as Fire Opal. The purpose of this update is to alert you that: 1. The Settlement has received final approval. The Settlement will go into effect on March 11, 2024. As of that date, customers are eligible to receive extended warranty coverage under the Settlement. 2. Under the Settlement, an eligible customer might receive extended warranty coverage as of the date the vehicle is presented to your dealership OR certain customers might have validated Qualified Future Repair claims, making them eligible for a different level of coverage. To determine if a customer: (a) is eligible for extended warranty coverage; and (b) what level of warranty coverage is available to them, please refer to the Service Packages section in VMI/Netstar. 3. Damage code 21800 (damage type 00) must be used for warranty claims covered pursuant to the Settlement. Please note that you should only claim for the percentage of warranty repair cost reflected in VMI/Netstar (see below, e.g., for Period Two, claim only 50% of warranty repair cost). 4. Before the dealership agrees to perform any work: The customer should be given a Repair Order containing: (1) an estimate for the repair, (2) the portion covered under the extended warranty; and (3) the customers contribution amount for the repair, if applicable. The customer must agree to pay their contribution amount for the repair and sign the Repair Order before the repair is performed.
- 10248162Crease formation on genuine leather seat covers in vehicles with low mileage Objects left on the seats for extended periods of time (pressure marks). Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). Light initial creases due to vehicle handling. Light creases in the outer covers originating from the production process (missing finish). Heat treatment of the seat covers using heat gun and plastic wedge. Be very careful to not overheat the seat material!
- 10235972Enclosed for your information and pursuant to part 579.5, please find our latest Service and Warranty Bulletins for March, 2016
- 10205233Mobile phone cotacts are not transferred completely.
- 10205225Headlamps fogged.
- 10186142Unmotivated Reaction from Park Assist - model series 213 facelift / 238 facelift with option code 235 (active par- king assist) and option code 501 (surround view system)
- 10186135If the customer brakes sharply from a speed of > 30mph, without ABS intervention, there is a single cracking noise from the area of the ESP hydraulic unit
- 10181124Harsh engagement when changing gear range from P to D or R
- 10181123Harsh engagement when changing gear range from P to D
- 10179951AIRMATIC Fault Message "Max 80 km/ h (50 mph) " In Instrument Cluster
- 10167561Xenon burner inoperative or flickers
- 10167525Apple products (iPhone or iPod) are not charged via the serial USB interface of the COMAND Online control unit (A40/3) in the stowage compartment of the center console.
- 10167489Noise: A rattling noise may be heard from the area of the chain drive for approx. 2-5 seconds after engine start. And/or: Fault code entries in engine control unit: SIM271DE20: P001177 The position of the intake camshaft (cylinder bank 1) deviates from the specified value. The commanded position cannot be reached. P001762 The position of the exhaust camshaft (cylinder bank 1) is implausible in comparison with the position of the crankshaft. The signal comparison is faulty. P001192 The position of the intake camshaft (cylinder bank 1) deviates from the specified value. The function or the instruction is faulty. P001195 The position of the intake camshaft (cylinder bank 1) deviates from the specified value. The mechanical setup is not OK. P001477 The position of the exhaust camshaft (cylinder bank 1) deviates from the specified value. The commanded position cannot be reached. P001492 The position of the exhaust camshaft (cylinder bank 1) deviates from the specified value. The function or the instruction is faulty. P001495 The position of the exhaust camshaft (cylinder bank 1) deviates from the specified value. The mechanical setup is not OK. P001600 The position of the intake camshaft (cylinder bank 1) is implausible in comparison with the position of the crankshaft. P001662 The position of the intake camshaft (cylinder bank 1) is implausible in comparison with the position of the crankshaft. The signal comparison is faulty. P001700 The position of the exhaust camshaft (cylinder bank 1) is implausible in comparison with the position of the crankshaft.
- 10167000Surface damage on steering wheel trim
- 10166976Message in instrument cluster "DISTRONIC PLUSCurrently Unavailable - See Owner's Manual"
- 10166975This Customer 1 Action has been initiated because certain mbrace subscribers were recently contacted by mbrace informing them that they need to have an i-button call performed to ensure their mbrace device has registered with the Verizon Telematics systems. If the i-button call failed or if the customer was unable to perform the i-button call, the mbrace agent instructed the customer to make an appointment with their dealer to have the issue corrected and/or i-button call performed. The vehicles impacted range from model year 2002 to 2014.
- 10166103The controls on the partially electric seat adjustment switch stick or are loose or broken.
- 10166092Dynamic seat control is not functioning correctly and/or air cushions do not inflate fully.
- 10166084Rubbing noises at the point at which the covering rubs against the cover. Only occurs on vehicles with the sport package .
- 10166083Rubbing noises arise between the covering and cover of the sidebag
- 10166082Noises from area of seat adjuster or cushion frame.
- 10166081Noise complaints when load on backrest frame changes. Affects the driver and front passenger seats. Also perform the remedial action if you are performing work on: - backrest frame - backrest cover or - guide rail of head restraint. If the backrest frame is exposed as a result, the actions must always be performed in order to avoid follow-up repairs.
- 10158329Oil in engine wiring harness
- 10151959Seat belt extender toothed rack sluggish or makes noises
- 10151948Display of suspension setting in head unit implausible
- 10151924Liftgate intermittently does not open fully
- 10136031Engine noises (rattling) after engine start
- 10135917Malfunctions of various control units and/or on-board power supply problems caused by water in the control unit tray under the driver/front passenger seat (dislocated, pinched or leaking condensation hose)
- 10135748Quiescent current in seat control unit
- 10135628iPhone mobile phone: Various complaints after software update to iOS8
- 10135598Engine diagnosis warning lamp lights up in instrument cluster, fault code U145400: "Implausible data were received from the ethanol sensor"
- 10037653Mercedes-benz: there are electrical production quality issues that cause the air bag warning light to illuminate.
- 10034605Mercedes: seat belts, emergency tensioning retractors. Model series 204 (with codes 299 and 800), 207, 212. Seat belt can only be pulled out with great effort. At the same time a noise can be heard from the reversible reel tensioner gearing. Customer continuously pulled on seat belt strap while adjusting the fit of the belt after buckling up (to reduce the slack). This caused the drive of the reversible reel tensioner to remain engaged. Updated 4/26/12. Updated 5/22/2012.
- 10033070Xentry (mercedes): engine warning lamp IS currently on or was on and a delay fault of the camshaft adjust to current or stored in the engine control unit. Models 171, 203, 209, 211, 219, 221, 216, 230, 164, 251, and 403. No model years listed.
Every Mercedes-Benz AMG E55 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.