2014 Mercedes-Benz CLA250
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mercedes-Benz › CLA250 › 2014
These records cover every 2014 Mercedes-Benz CLA250. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
6 recalls name the 2014 Mercedes-Benz CLA250. Newest first.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2014-2020 C-Class, CLA, GLA, S-Class, GLC, and GLE vehicles. Please refer to MBUSA's recall report for specific vehicle details. The front roof panel located between the windshield and the panoramic sunroof may not have been bonded correctly to the vehicle during a prior repair, allowing the front panel…
Risk and remedy
Risk
A detached roof panel can become a road hazard, increasing the risk of a crash.
Remedy
Dealers will replace the front panel, free of charge. Owner notification letters were mailed on August 2, 2024. Owner notification letters will be mailed in phases, on, March 22,2024, and August 2, 2024. Owners may contact MBUSA customer service at 1-800-367-6372. This recall is an expansion of NHTSA recall number 21V-197.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2017-2020 C300 Coupe, C43 Coupe AMG, C43 AMG, 2015-2020 C300, GLA250, 2016-2018 C350e, CLA45 Coupe AMG, 2015 C400, S65 AMG, 2015-2019 C63 AMG, 2016 C450, 2015-2016 GLA45 AMG, S600, 2016-2020 GLC300, 2017-2019 GLC43 AMG, GLE43 Coupe AMG, 2014-2019 CLA250 Coupe, 2014-2015 CLA45 AMG, 2018 GLC63 AMG, 2014-2017…
Risk and remedy
Risk
The adhesive bonding of the front panel might deteriorate, possibly causing the front panel to detach from the vehicle and become a road hazard, increasing the risk of a crash.
Remedy
Mercedes-Benz dealer will remove the bonded panel and will install a new front panel by following the detailed repair instructions and using the approved primer, cleaner and adhesive, free of charge. Owner notification letters were mailed on September 3, 2021 and October 26, 2021. Owners may contact MBUSA customer service at 1-800-367-6372.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2013-2017 vehicles due to a software fault that may cause the date and time for the emergency call system (eCall) to differ from the actual date and time, potentially relaying an inaccurate vehicle location. For a full list of the affected models visit…
Risk and remedy
Risk
An inaccurate vehicle location may delay emergency responders, increasing the risk of injury.
Remedy
MBUSA has initiated an Over the Air (OTA) remote update. MBUSA will also notify owners, and dealers will check software for a successful OTA or update the communication module software as needed, free of charge. The recall began December 23, 2019. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2019120008.
Mercedes-Benz USA, LLC. (MBUSA) is recalling these vehicles: 2014-2018 CLA250, CLA250 4Matic, CLA45 AMG 4Matic, 2015-2018 GLA250, GLA250 4Matic, GLA45 AMG 4Matic, C300 4Matic, C63S AMG, 2012-2014 C250, C350, C300 4Matic, E550 4Matic, 2013-2014 C63 AMG, 2012-2015 C250 Coupe, C350 Coupe, C63 AMG Coupe, 2013-2015 C350 4Matic Coupe, GLK250 4Matic BlueTec…
Risk and remedy
Risk
If the driver air bag inadvertently deploys, it can increase the risk of injury and a crash.
Remedy
MBUSA will notify owners, and dealers will add sufficient grounding to the steering components, free of charge. The recall began in December 6, 2017. Owners may contact MBUSA customer service at 1-877-496-3691.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2014 CLA250 vehicles manufactured December 14, 2012, to April 24, 2013 equipped with gasoline engines. The affected vehicles have a fitting that connects the vacuum line to the brake booster which may break causing increased forced to be needed to apply the brakes.
Risk and remedy
Risk
If the vehicles unexpectedly need increased pressure on the brake pedal to apply the brakes, there would be an increased risk of a crash.
Remedy
MBUSA will notify owners, and dealers will replace the connector end fitting at the brake booster, free of charge. The recall began July 21, 2017. Owners may contact MBUSA customer service at 1-800-367-6372.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain model year 2014 CLA 250C vehicles manufactured September 10, 2014, to September 11, 2014, 2014 CLA 250C 4Matic vehicles manufactured September 13, 2014, to September 25, 2014, and 2014 CLA 45 AMG 4Matic vehicles manufactured September 10, 2014, to September 25, 2014. The affected vehicles have fuses that…
Risk and remedy
Risk
If the fuses were not properly installed, they may lose electrical contact. In the event of a loss of electrical contact, certain systems may be impacted, including the function of the front passenger seat occupancy recognition system, the passenger side air bag indicator lamp, the instrument cluster and the windshield wipers. Should the function of the front passenger seat occupancy recognition system or the passenger side airbag indicator lamp be affected, the risk of injury for passengers in the event of a crash would be increased. Should the function of the instrument cluster and the windshield wipers be affected, the risk of a crash would be increased.
Remedy
MBUSA will notify owners, and dealers will inspect the position and orientation of the fuses, and if necessary, replace the fuse box, free of charge. The recall began on August 18, 2015. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2015060007.
Owner complaints
179 complaints5 involved a crash3 involved a fire6 injuries
What owners report most
Latest complaints
- Wheels
. Left front wheel assembly lug bolts. All five lug bolts sheared off completely while driving, resulting in a wheel separation and structural failure. Yes, four of the five physical sheared lug bolts are preserved and immediately available for independent forensic laboratory inspection upon…
. Left front wheel assembly lug bolts. All five lug bolts sheared off completely while driving, resulting in a wheel separation and structural failure. Yes, four of the five physical sheared lug bolts are preserved and immediately available for independent forensic laboratory inspection upon request.\n\n2. The left front wheel assembly separated while operating the vehicle on a public roadway at speed. This caused an immediate loss of directional vehicle control and severe chassis instability, posing an imminent, life-threatening risk of a high-speed rollover, collision with oncoming traffic, or total wheel detachment on a major highway.\n\n3. Yes. Following the incident, the vehicle was towed directly to B&H Auto Body. Their certified technicians physically inspected the remaining wheel hubs on-site and confirmed in writing that widespread over-torquing of lug fasteners was present across the vehicle's remaining wheel assemblies.\n\n4. Yes.\n\nIndependent Repair Facility: B&H Auto Body physically inspected the vehicle, wheel assemblies, and remaining hubs post-incident.\n\nThird-Party Claims Administrator / Consultant: [XXX] (TPA for Costco Wholesale) retained GT Technical Consultants ([XXX]), who conducted a photo-only desktop review. However, the consultant refused physical inspection of the preserved hardware and issued a denial based on disproven third-party dealer mileage assumptions (refuted by official Mercedes-Benz Repair Order #XXX).\n\n5. No prior warning lamps or diagnostic messages. The failure occurred suddenly without dashboard warning indicators. The vehicle experienced an immediate catast INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Wheels
1. Left front wheel assembly lug bolts. All five lug bolts sheared off completely while driving, resulting in a wheel separation and structural failure. Yes, four of the five physical sheared lug bolts are preserved and immediately available for independent forensic laboratory inspection upon…
1. Left front wheel assembly lug bolts. All five lug bolts sheared off completely while driving, resulting in a wheel separation and structural failure. Yes, four of the five physical sheared lug bolts are preserved and immediately available for independent forensic laboratory inspection upon request. 2. The left front wheel assembly separated while operating the vehicle on a public roadway at speed. This caused an immediate loss of directional vehicle control and severe chassis instability, posing an imminent, life-threatening risk of a high-speed rollover, collision with oncoming traffic, or total wheel detachment on a major highway. 3. Yes. Following the incident, the vehicle was towed directly to B&H Auto Body. Their certified technicians physically inspected the remaining wheel hubs on-site and confirmed in writing that widespread over-torquing of lug fasteners was present across the vehicle's remaining wheel assemblies. 4. Yes. Independent Repair Facility: B&H Auto Body physically inspected the vehicle, wheel assemblies, and remaining hubs post-incident. Third-Party Claims Administrator / Consultant: [XXX] (TPA for Costco Wholesale) retained GT Technical Consultants ([XXX]), who conducted a photo-only desktop review. However, the consultant refused physical inspection of the preserved hardware and issued a denial based on disproven third-party dealer mileage assumptions (refuted by official Mercedes-Benz Repair Order #XXX). 5. No prior warning lamps or diagnostic messages. The failure occurred suddenly without dashboard warning indicators. The vehicle experienced an immediate catast INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Air bags
The contact owns a 2014 Mercedes-Benz CLA250. The contact stated that while driving at undisclosed speeds, the air bag warning light illuminated. The contact stated that there was an abnormal snapping sound coming from the vehicle. The vehicle was taken to a dealer where a code reader retrieved…
The contact owns a 2014 Mercedes-Benz CLA250. The contact stated that while driving at undisclosed speeds, the air bag warning light illuminated. The contact stated that there was an abnormal snapping sound coming from the vehicle. The vehicle was taken to a dealer where a code reader retrieved information that there was a fault with the SRS sensor. The contact was charged for a diagnostic test and provided an estimate for the repair. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was approximately 150,000.
- Electrical system
The shifter randomly stops working so I could have the car in reverse and not be able to put it in drive and be stuck in traffic or vice versa. I can have the car and drive and not be able to put it in reverse. I'd be stuck in traffic very dangerous.
- Air bags › Side/window · Engine · Structure
The contact owns a 2014 Mercedes-Benz CLA-Class. The contact stated that upon approaching the vehicle, she discovered that the driver's side window was shattered. The sunroof was brown, and there was a hole in the dashboard showing the engine. The contact stated that the vehicle had caught fire…
The contact owns a 2014 Mercedes-Benz CLA-Class. The contact stated that upon approaching the vehicle, she discovered that the driver's side window was shattered. The sunroof was brown, and there was a hole in the dashboard showing the engine. The contact stated that the vehicle had caught fire; however, the fire extinguished on its own. There were no prior warning lights illuminated. There were no reported injuries, air bag deployment, or police report filed. The fire department responded and was present at the scene, and disconnected several wires. The local dealer was not contacted. The manufacturer was not notified of the failure. The failure mileage was unknown.
- Engine
I own a 2014 Mercedes-Benz CLA 250 with the 2.0L turbocharged 4-cylinder M270 engine. The check-engine light came on and an OBD-II scan showed fault code P052E / P052E71, which indicates that the valve for crankcase ventilation (PCV / crankcase ventilation valve integrated into the valve cover) has…
I own a 2014 Mercedes-Benz CLA 250 with the 2.0L turbocharged 4-cylinder M270 engine. The check-engine light came on and an OBD-II scan showed fault code P052E / P052E71, which indicates that the valve for crankcase ventilation (PCV / crankcase ventilation valve integrated into the valve cover) has a malfunction and the actuator is blocked. The vehicle is available for inspection and, if the repair is performed, the failed part can be retained. This appears to be the same failure that has been documented by other owners and by Mercedes-Benz on the related M274 engine used in other models (same 2.0L turbo engine family and PCV / crankcase ventilation design, but in a longitudinal layout). For those vehicles, Mercedes has issued technical service bulletins and extended emissions-related warranty coverage for the crankcase ventilation / PCV system, but vehicles like my CLA with the M270 engine are excluded even though they show the same DTCs and failure. In my case, the problem has so far shown up as a check-engine light and stored fault codes, without obvious drivability symptoms yet. However, a blocked or failed crankcase ventilation valve can increase crankcase pressure, cause oil leaks, fuel vapor or oil smells, and potential turbocharger or drivability issues, which may create a safety risk if the problem worsens (loss of power or stalling). The problem has been reproduced multiple times with different OBD-II scan tools. I contacted Mercedes-Benz and was told there are no recalls or warranty coverage for this issue on my vehicle.
- Engine · Fuel/propulsion system
P052e common crankcase ventilator issue mercedez extended warranty for later models for this same consistent issue in all the cars excluding 2014 starting at 2015 vehicles making us pay over $2000 for a fix supposed to be free being that it's all mercedes even the year before Should be a recall along with the hundreds of thousands of people with same issue online same car.
- Structure
The contact owns a 2014 Mercedes-Benz CLA250. The contact stated while driving 30 MPH, the contact briefly lost control of the vehicle, prompting the contact to pull over to the shoulder of the roadway. After a visual inspection, the contact observed excessive rust underneath the rear subframe. No…
The contact owns a 2014 Mercedes-Benz CLA250. The contact stated while driving 30 MPH, the contact briefly lost control of the vehicle, prompting the contact to pull over to the shoulder of the roadway. After a visual inspection, the contact observed excessive rust underneath the rear subframe. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the failure, the contact related the failure to Extended Warranty–Rear Subframe Damage Code: 35441 47. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was 100,000.
- Unknown or other
my rear subframe rusted from the inside out and due to the rust my control arm broke off
- Engine · Fuel/propulsion system
Check engine code p052e - PCV valve replacement (Crankcase Ventilation valve) - common issue on car and known recall for other models
- Visibility › Sun/moon roof assembly
The contact owns a 2014 Mercedes-Benz CLA250. The contact stated that while driving at an undisclosed speed, the contact became aware that the sunroof was inoperable. The contact stated that the glass panel had detached, and the contact became aware of a crack on the glass panel. The dealer was…
The contact owns a 2014 Mercedes-Benz CLA250. The contact stated that while driving at an undisclosed speed, the contact became aware that the sunroof was inoperable. The contact stated that the glass panel had detached, and the contact became aware of a crack on the glass panel. The dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 89,000.
- Unknown or other
I was driving down the highway without any vehicles in front of me at around 65mph when all of a sudden my panoramic roof exploded out of nowhere, it sounded like a gunshot going off inside the car and I nearly crashed my vehicle from the sudden explosion, I luckily had the glass shade cover up and…
I was driving down the highway without any vehicles in front of me at around 65mph when all of a sudden my panoramic roof exploded out of nowhere, it sounded like a gunshot going off inside the car and I nearly crashed my vehicle from the sudden explosion, I luckily had the glass shade cover up and glass did not fall in my face, I had my [XXX] daughter and [XXX] son in the backseat and they are now terrified to get back into any vehicle. This is extremely dangerous situation and will cause a serious accident in the future if not fixed. Nothing hit my roof and I wasn’t even using it at the time no one touched the thing, it just exploded out of nowhere. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Electrical system · Engine
The contact owns a 2014 Mercedes-Benz CLA250. The contact stated while driving at approximately 70 MPH, the vehicle stalled. The contact stated that when the vehicle stalled, an audible chime sounded, and the air bag warning light illuminated, and a RED triangle symbol flashed on the instrument…
The contact owns a 2014 Mercedes-Benz CLA250. The contact stated while driving at approximately 70 MPH, the vehicle stalled. The contact stated that when the vehicle stalled, an audible chime sounded, and the air bag warning light illuminated, and a RED triangle symbol flashed on the instrument panel. The contact stated that the instrument cluster went blank, and the vehicle lost power steering assist. Additionally, the brake pedal was very difficult to depress. The contact was able to restart the vehicle after several attempts, and the vehicle returned to normal functionality. The contact stated that the failure reoccurred. The contact drove the vehicle to a dealer who diagnosed the vehicle and determined that the battery needed to be replaced. The vehicle was repaired. The contact stated that the failure reoccurred and the vehicle had not taken back to the dealer. The manufacturer was not informed of the failure. The failure mileage was 76,850.
- Engine · Vehicle speed control
Apparently the TPS (Throttle Position Sensor) which is built into the gas pedal on this 2014 MB CLA250 only lasts so long before it becomes defective under highway conditions and causes the vehicle to go into LIMP MODE. When full acceleration is necessary, the unit will work for perhaps a few…
Apparently the TPS (Throttle Position Sensor) which is built into the gas pedal on this 2014 MB CLA250 only lasts so long before it becomes defective under highway conditions and causes the vehicle to go into LIMP MODE. When full acceleration is necessary, the unit will work for perhaps a few months or less, and then continue to fail worse and more frequently with each attempt at full acceleration. At highway speeds, this is an essential feature in a 4-cylinder vehicle such as this one and without the necessary acceleration capability, can expose the driver to serious risk of collision with other on-coming vehicles traveling at highway speeds. This "Limp Mode" features is extremely dangerous and hazardous to not only the driver of their vehicle, but to other drivers around them since they are left in a devastating position of being unable to accelerate normally and as necessary and as one would expect in any vehicle, let alone a Mercedes Benz. Never before have I driven a car that falls out of full acceleration mode only to subject the driver to serious collision circumstances. Whoever the imbecile is at MB engineering who incorporated this Limp Mode Feature should be fired!!! To make matters worse, this cheaply built TPS, which is the cause of the problem in my vehicle specifically, was only warrantied twice by the dealer and now they will not replace it under warranty which is a two-year period. I've only had the part 5 months before it failed again due to poor manufacturing and I had to pay all over again for a new one despite my warranty validity. There have been many other MB owners who have the same complaint for Limp Mode, which tells me that it's definitely not me, but rather the poorly built or engineered vehicle, as a matter of fact. MB has denied having these complaints to me, which of course, is a lie. That's misleading and deceptive business practices in my State and MB needs to live up to its warranty provisions and respect its customers.
- Wheels
I was driving my 2014 Mercedes CLA 250 on [XXX] traveling away from Fairfax County and towards Prince William County on Christmas morning right before [XXX]. The front right passenger side wheel started shaking and then flew off. I brought the car to a stop on the left hand shoulder of the road on…
I was driving my 2014 Mercedes CLA 250 on [XXX] traveling away from Fairfax County and towards Prince William County on Christmas morning right before [XXX]. The front right passenger side wheel started shaking and then flew off. I brought the car to a stop on the left hand shoulder of the road on three wheels. My wheel hit the metal fence and then ricocheted back across to the left crossing both sides of traffic (four lanes), hitting a concrete wall and becoming airborne before landing in the stream below. It was sunny and there was no rain. Speed was 45 mph. Witnesses observed the incident and I have their contact information. A police report was filed. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
- Electrical system · Unknown or other
As I was driving yesterday afternoon, I heard a noise and normally we don't hear any type of noise or air coming into the car. I decided to open the sunroof to see if there was something wrong with it like if it was stuck open or if something was stuck in it, and the whole sunroof almost flew off…
As I was driving yesterday afternoon, I heard a noise and normally we don't hear any type of noise or air coming into the car. I decided to open the sunroof to see if there was something wrong with it like if it was stuck open or if something was stuck in it, and the whole sunroof almost flew off the car. I had to pull over as fast as I could into the break down lane and it took me a while to close it and it still seems to be open, I didn't see anything stuck in the guide rails or in the area when closing it. I was very scared for the safety of my children and myself and for the other drivers on the highway. I have made an appointment so the shop and check the car out and run some diagnostics. There are no warning lights or messages prior to the sunroof almost flying off the car.
- Air bags
Component failure was steering column module. Safety issue was air bag could inadvertently deploy while driving. Recall NHTSA # 17V627 was issued. Vehicle inspected by Stargate Garage, Caliber Collision and Mercedes of Pompano Beach FL. Message displayed was front left malfunction and red warning…
Component failure was steering column module. Safety issue was air bag could inadvertently deploy while driving. Recall NHTSA # 17V627 was issued. Vehicle inspected by Stargate Garage, Caliber Collision and Mercedes of Pompano Beach FL. Message displayed was front left malfunction and red warning light for SRS system. Warning message and red light appeared 18 months after dealer supposedly repaired this recalled item. Vehicle was returned to dealer to make proper repair on this recalled item and they refused to replace it. Steering column module was replace by Stargate Garage and the message left front malfunction and red light warning SRS no longer appears on instrument panel. Stargate Garage was paid $685 to make this repair which should have been the dealer's responsibility. Therefor I am requesting that the dealer reimburse me my out of pocket expense of $685.00 since it was there responsibility to make this repair under the recall that was issued. I was unable to upload my documentation so I will also be sending this information in the mail.
- Engine
Common issue with this make and model and many others Check engine code P052E
- Engine
My engine light is and as per mechanics I have seen it is a very common problem with mercedes benz around crankcase ventilation actuator. As per mechanics its faulty part and mercedes have changed it for new models but there is no recall on the older models. Cost to repair the part is around $3500.…
My engine light is and as per mechanics I have seen it is a very common problem with mercedes benz around crankcase ventilation actuator. As per mechanics its faulty part and mercedes have changed it for new models but there is no recall on the older models. Cost to repair the part is around $3500. Issue with the part if causing environment problem as mileages is reduced and more fuel burning. This eventually impacts the engine and car.
- Structure
The contact owns a 2014 Mercedes-Benz CLA250. The contact stated that the front panel around the panoramic roof was separating. The contact called a dealer and was informed that there was a recall for the panel separation, however, the VIN was not included. The contact was informed that the VIN was…
The contact owns a 2014 Mercedes-Benz CLA250. The contact stated that the front panel around the panoramic roof was separating. The contact called a dealer and was informed that there was a recall for the panel separation, however, the VIN was not included. The contact was informed that the VIN was not included in NHTSA Campaign Number: 21V197000 (Structure). The vehicle had not been repaired. The manufacturer had been informed of the failure. The failure mileage was approximately 150,000.
- Power train
Please let me preface this by saying that I am a certified aircraft mechanic and have a good working knowledge of cars. My vehicle had NO prior indications, symptoms or abnormalities! This was completely out of the blue. Absolutely no warning that this was going to happen. The transmission of my…
Please let me preface this by saying that I am a certified aircraft mechanic and have a good working knowledge of cars. My vehicle had NO prior indications, symptoms or abnormalities! This was completely out of the blue. Absolutely no warning that this was going to happen. The transmission of my 2014 CLA 250 Base model, while operating at 65mph on the interstate, all on its own, went into neutral and now will not engage into Drive. Initially following this incident, as I dogged the other vehicles on the interstate and coasted to the emergency lane, there were the following warning lights: ABS, TRACTION CONTROL, PARKING BRAKE accompanied with the alerts….PRE-SAFE Functions Limited, ABS/TRACTION CONTROL Currently Unavailable See O.M., Parking Brake See O.M. I then took it to the MB dealership and after they attempted transmission adaptation (which was not successful) they showed me the following fault codes: 079200-RPM sensor 1 has a malfunction, 287C00-Adaptation was not completed successfully. The alerts now state….Service Required: Do Not Shift Gears, visit dealer. The dealer wanted to change the transmission. I refused. I have had zero noticeable issues with the transmission with 72,000 miles. I had the transmission fluid replaced at 65,000 miles. I baby the car. I shouldn’t need to explain the dangers of a vehicle, while driving, randomly shifting into neutral, and not being able to be shifted back into Drive. I attempted all possible means of shifting the automatic transmission into drive, including the use of manual gear selection, and none of them worked, even after shutting the vehicle off and restarting multiple times. This is an extremely DANGEROUS malfunction!!
- Electrical system · Engine · Unknown or other
As I was driving, the car is on D but it slips into N and I cannot shift to any other gear accept P. This happens randomly and happened three times. I noticed the GLA250 also had this issue. I have to turn off my engine and restart my car to get it running again normally.
- Unknown or other
When accelerating, the car loses power. My teenager was almost hit by another car as she was trying to enter the highway via an off-ramp. It happens very often. This started occurring at 60k! When stopped with your foot on the brake or even in park, the car goes slams backward and cuts the engine…
When accelerating, the car loses power. My teenager was almost hit by another car as she was trying to enter the highway via an off-ramp. It happens very often. This started occurring at 60k! When stopped with your foot on the brake or even in park, the car goes slams backward and cuts the engine back to a rev. This has been occurring since 37k. Additionally, there is a loud clunking noise when you turn the wheel. This has been occurring since 50k. Power seat on driver’s side loses all power and locks. This has been replaced/repaired three times! Glove box locked and will not unlock even with key. All of these issues are frequently reported via complaint sites, yet no recalls on this very expensive car. It is truly a hazard!! https://www.mercedescla.org/threads/loss-of-power.40274/
- Power train
While driving the transmission slips into neutral. Must come to a complete stop and turn off the car then turn it on again to shift into gear.
- Unknown or other
The sunroof no longer works. Found pieces of plastic in the guide rails as the shoe horn pieces seems to be broken apart and had to force my sunroof to close and now it whistles as I am on the highway. I have seen hundreds of complains about this on the Mercedes Benz message boards
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Front Roof Panel Detachment
On January 8, 2021, after ongoing review with Mercedes Benz, the National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation (ODI) opened PE21-001 to assess allegations of front roof panel detachments while driving at highway speeds in certain 2015 Mercedes-Benz (Mercedes) C-Class…
On January 8, 2021, after ongoing review with Mercedes Benz, the National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation (ODI) opened PE21-001 to assess allegations of front roof panel detachments while driving at highway speeds in certain 2015 Mercedes-Benz (Mercedes) C-Class vehicles.The subject front roof panel is a stationary panel composed of polycarbonate and is attached to the vehicle via adhesive at the time of manufacture. The panel is found on subject vehicles equipped with panoramic sunroofs. Over time, the subject panels may exhibit cosmetic degradation leading to replacement of the panel, a procedure which entails: removal of the old panel and adhesive, site preparation, and installation of a replacement panel with new adhesive.The consumer complaints that prompted the opening of PE21-001 all described detachments of front roof panels that had been replaced after the vehicle was put into service.Mercedes' internal investigation identified a broader scope of affected vehicles (2014-2020 CLA, GLA, C, S, GLC, and GLE class) and found the following potential service procedure- related causes of front roof panel detachments:- Improper surface pretreatments such as the use of the wrong primer or cleaner or scoring of the surface; or - Use of the incorrect adhesive.These conditions lead to a front roof panel bond that, even if sound at the time of repair, cannot maintain its strength over time and environmental exposure.Mercedes updated its service and parts ordering systems to reinforce the proper use of specified kits and procedures via webinars, shop foreman meetings, and explicit reference to the risks incurred by diverging from the repair procedures. Mercedes is also furnishing parts ordering assistance, and will hold dealerships accountable for improper repairs.ODI's analysis of the ten complaints it has received from the public (VOQ's) and MBUSA's complaint data submitted in response to the information request letter for PE21-001 identified a total of 57 non-duplicative reports alleging incidents in which the front roof panel detached from the vehicle while in motion. Included within the 57 reports are incidents where consumers state the panel detached ...and flew off into traffic.On March 19, 2021, Mercedes notified NHTSA that it would recall subject vehicles with front roof panels known to have been replaced after the original sale of the vehicle. In total, the recall (designated as Recall 21V197) covers 15,099 vehicles that were ever registered in the United States. Based on Recall 21V197 and the remedy implemented by Mercedes, further investigation does not appear to be warranted at this time.Accordingly, this investigation is closed.The ODI complaints cited above can be viewed at www.nhtsa.gov under the following ODI identification numbers: 11376425, 11352686, 11351629, 11349158, 11341541, 11337594, 11324100, 11311591, 11222127, 11404183
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010818Complaint Transmission control unit Y3/8n4 (fully integrated transmission control unit (VGS)) not listed in quick test and/or no communication possible with VGS. Cause Transmission control unit Y3/8n4 Remedy It is important that LI54.15-P-057373 is processed before replacing any component parts (transmission 722.9). After processing and complying with the above documents, perform a reset on the transmission control unit Y3/8n4 (VGS) (ignition reset), check that the transmission connector is seated correctly and inspect the PINs for concerns. If communication with the VGS cannot be established afterwards, the component part 'electrohydraulic controller unit (EHS)' must be replaced, as it is not possible to transfer the valve characteristics under the above-mentioned conditions. Installation of a VGS repair kit is not permitted in this case.
- 11010755Complaint After a control unit replacement of "N112/9 - control unit for telematics services (HERMES)" or the "N112/2 - control unit for telematics services (RAMSES)", the Digital Extras (previously Mercedes me) cannot be activated. The DTC B15CE00 is active or active+saved. In vehicles with "N112/9 - control unit for telematics services (HERMES)": The message "SOS - service not activated" permanently lights up in the instrument cluster AND the actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/9 - control unit for telematics services (HERMES)", the registration error "CEP Invalid VIN/UniqueID combination" is displayed. In vehicles with "N112/2 - control unit for telematics services (RAMSES)": The actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/2 - control unit for telematics services (RAMSES)", the registration error "CEP_ VIN_UNIQUEID_INVALID" is displayed. The emergency call is not impaired. Cause In the event of a control unit replacement, sporadic problems in the back end could result in data from the new control unit not being updated in the back end system. Remedy Please create a TIPS case. In some cases, the problem rectifies itself on its own after a little while.
- 11010494Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress). Note: -If no reduction in the degree of fogging is visible, the rear lamp is defective and must be replaced. -It is not physically possible to defog the headlamps completely some residual fogging may remain. Fogging does not impair the functionality or the service life of the rear lamps. -Simultaneous fogging of multiple component parts indicates extreme climatic conditions and also does not impair the functionality or the service life of the rear lamps. Remedy 2: You can recognize a defective rear lamp as follows: 1. Check the rear lamps to ensure that no external damage is present, and that the differential aeration cells and the diaphragm are present and correctly seated. -> If there are signs of external damage on the rear lamp, the component parts must be replaced as per WIS instructions. 2. Check the electrical connectors of the plugs and pins. -> If moisture/corrosion/etc. is present, the component part must be replaced as per WIS instructions. 3. Check for leak tightness -> Close all openings with Terostat IX or similar and establish and stabilize via an overpressure (4050 mbar) via the plug. -> In the event of a sudden pressure drop, the component part must be replaced as per WIS instructions. Note: External damage to the rear lamps does not constitute a warranty or goodwill case.
- 11009122Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer line by animal. 5. Seal on heating washer fluid reservoir/washer fluid reservoir. Remedy Replace defective component parts only. Do not replace any adjacent component parts that are intact. Note: Repair kits for washer line hoses do exist to allow patches for line damage.
- 11008880Complaint After a control unit replacement of "N112/9 - control unit for telematics services (HERMES)" or the "N112/2 - control unit for telematics services (RAMSES)", the Digital Extras (previously Mercedes me) cannot be activated. The DTC B15CE00 is active or active+saved. In vehicles with "N112/9 - control unit for telematics services (HERMES)": The message "SOS - service not activated" permanently lights up in the instrument cluster AND the actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/9 - control unit for telematics services (HERMES)", the registration error "CEP Invalid VIN/UniqueID combination" is displayed. In vehicles with "N112/2 - control unit for telematics services (RAMSES)": The actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/2 - control unit for telematics services (RAMSES)", the registration error "CEP_ VIN_UNIQUEID_INVALID" is displayed. The emergency call is not impaired. Cause In the event of a control unit replacement, sporadic problems in the back end could result in data from the new control unit not being updated in the back end system. Remedy Please create a TIPS case. In some cases, the problem rectifies itself on its own after a little while.
- 11008712Complaint Check engine light on. One of the below fault codes is current in the engine control module (N3/10). P04DB29, P04DB31, P04DB79 Cause Open circuit or high resistance to crankcase vent line contact Remedy 1. Check the electrical connector for the relevant vent line contact switch noted below. Refer to attached photos of connection locations. 2. Ensure the bolted connection is secure and bolt can be torqued (9Nm). 3. Check continuity from vent line connection to ME control unit. Repair wire if damage is found. The circuit from ME provides 5V and is pulled to 0V when the ground connection is intact. M260 P04DB31- S88/15 P04DB79- S88/16 M264 P04DB31- S88/15 P04DB79- S88/16 P04DB29- S88/17 M270/M274 P04DB79- S88/5 Note: This repair is not warrantable if the connection was left loose during previous repair/maintenance.
- 11008323Complaint Headlamps fogged or droplets forming. Cause Due to its outlet openings, the headlamp is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate into the headlamp. This can lead to the formation of condensation on the lens of the headlamp. The headlamps comply with all applicable US standards and regulations. Remedy Check housing cover of lamp unit for natural fogging or condensation as per LI82.10-P-078301. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. Note: Order service covers and desiccant packs based on the validity description. 1. Remove headlamps. 2. Remove all grommets from outlet openings. 3. Seal vent openings with sealing profile. Important: All openings must be sealed carefully for the pressure compensation diaphragm to work properly! 4. Remove existing service cover. 5. Place desiccant packs into the new service covers and bolt down (Picture_01). 6. Glue the new diaphragm onto the intended surface at the service cover (Picture_02). Note: The bonding surface must be clean and dry. 7. Attach service cover with desiccant pack at headlamp. 8. Install headlamp. To ensure that the desiccant pack (absorption) acts effectively, the headlamp has to be air-sealed. Observe or check the following points for this: 1. Seals at the central connector must all be present and correctly fitted (Picture_03). 2. The new transparent diaphragm must be correctly bonded (Picture_04). 3. Check headlamp housing for any external damage.
- 11008091Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protruding material residues of the microphone cutout at the headliner, e.g. with a soldering iron. The microphone must be seated in the headliner as shown in picture "2". 4. Push microphone from behind until it is firmly pressed into the headliner 5. Maintain pressure and press/clip cap into microphone from the front. Note: The cover cap must be clearly heard and felt to engage. 6. This procedure must be carried out on both microphones (B25/20 and B25/21) Note: It is recommended to replace the cover caps. The non-woven cloth in the cover cap protects the microphone from soiling and must not be removed. NOTE: The information contained in this document is intended for use by trained, professional technicians with the knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz vehicles, using Mercedes-Benz approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes resulting in the same or similar symptoms or conditions described in this document, and trained professional service technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained in this document does not guarantee warranty coverage nor does it extend the vehicles warranty in any way.
- 11007974Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front Fog Lamps Leaking or Fogged". 1. Prepare headlamp/check for external damage: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for correct seating of the Gore-diaphragm/correct latching of the cover caps. 2. If the headlamp exhibits any external damage, replace the headlamp. For headlamps with an open system 1. Check the headlamps for any external damage and seal off the vent then make sure the cover caps are latched correctly into place. 2. If the headlamp exhibits any external damage, replace the headlamp. Note: A headlamp with external damage is not a warranty or goodwill case. 2. Leak test of headlamp with overpressure: Connect test adapter to pressure tester. (Figure 1) Check test adapter for leak tightness. To do so, connect plug and coupling (picture 2) and apply a maximum overpressure of 30 mbar. The pressure must remain constant. If the pressure does not remain constant, use a new adapter. Seal all the outlet openings using sealing compound and the given diaphragm with the plunger (picture 3). (Picture 4) Make allowance for the different headlamp variants here (there are different outlet openings). Check if the headlamp needs to be removed to gain access to the diagnostic socket on the headlamp housing. Plug the adapter onto the diagnostic socket on the headlamp housing. (Picture 5). Apply a maximum of 30 mbar overpressure to the headlamp housing. Note: If the maximum overpressure of 50 mbar is exceeded the headlamp seal will be damaged. If a pressure drop of less than 10 mbar is measured within 30 seconds, the headlamp is not leaky and the problem is down to natural physical fogging. If a pressure drop of more than 10 mbar is measured within 30 seconds, the headlamp is leaky. Note: The leaky position can be localized with the aid of soap suds. Replace any leaky headlamps. Note: Desiccant packs can be installed for headlamps that are not leaky. See: LI82.10-P-064766 Fogged headlamp, desiccant pack installed - open ventilation system LI82.10-P-078304 Fogged headlamp, desiccant pack installed - closed ventilation system
- 11007790Complaint Headlamps fogged or droplets forming. Cause Due to the housing cover with pressure compensation diaphragm, the headlamps are a "closed system". This means that the headlamps are protected against acid gases, dirt and exhaust gas. However, moisture can still enter from two sources. Through absorption and desorption (the commonest cause) or through permeation. Moisture is either absorbed by the plastic material and, when the light source is switched on, it is released from the plastic by desorption, or the moisture penetrates through the plastic materials of the headlamp from outside (permeation). This can lead to the formation of condensation on the lens of the headlamp. The headlamps comply with all applicable US standards and regulations. Remedy Check headlamps for natural fogging or condensation as per LI82.10-P-078301. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. Note: Order service covers and desiccant packs based on the validity description. 1. Remove existing service cover with diaphragm (Picture_01 (1)). 2. Insert desiccant packs (Picture_01 (2)) into new service covers with diaphragm and seal with protective grille and bolt down (Picture_01 (3)). Note: One desiccant pack is required for each small service cover, and two desiccant packs are required for each large service cover. 3. Stick the supplied diaphragm onto the new service cover and attach at the headlamp. Note: The bonding surface must be clean and dry. 4. If the headlamp housing has an additional 2nd diaphragm, this must be covered over with masking tape. Note: The bonding surface must be clean and dry. To ensure that the desiccant pack (absorption) acts effectively, the headlamp has to be air-sealed. Observe or check the following points for this: 1. Seals at the central connector must all be present and correctly fitted (Picture_02). 2. The new transparent diaphragm must be correctly bonded (Picture_03). 3. Check headlamp housing for any external damage.
- 11007753Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 C/+64.4 F) and connect the exhaust extraction. Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the hood or trunk. 4. Switch on the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Clearing fogged/condensed halogen/xenon headlamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4F). Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine. 3. Open the hood. 4. Switch off the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Note: If there is no visible reduction in the formation of condensation, check the headlamp for a defect. (See Remedy 2) It is not physically possible to defog the headlamps completely. Fogging does not impair the operation or the service life of the headlamp. Remedy 2 A Damaged headlamp can be identified as follows: 1. Check the headlamp for external damage and that the cover caps and the diaphragm are correctly seated. 2. Check the electrical connectors of the plugs and pins. 3. Check for leak tightness in accordance with LI82.10-P-078307. The test can only be conducted on headlamps. 4. If the headlamp or the rear lamp has any external damage, replace the component part in accordance with the WIS instructions. Note: External damage to the headlamp/rear lamp or faulty seating of the cover caps does not present a warranty or goodwill case. With headlamps, it is possible to install desiccant packs if the problem occurs repeatedly. Open ventilation system: LI82.10-P-064766. Closed ventilation system LI82.10-P-078304
- 11005294Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress).
- 10248162Crease formation on genuine leather seat covers in vehicles with low mileage Objects left on the seats for extended periods of time (pressure marks). Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). Light initial creases due to vehicle handling. Light creases in the outer covers originating from the production process (missing finish). Heat treatment of the seat covers using heat gun and plastic wedge. Be very careful to not overheat the seat material!
- 10246281Fault code P06DA00 is found current or stored in engine control unit. Check engine light may be activated. Various causes Up to Model year 2018 Fault code P06DA00 can be disregarded if not activating the check engine light, unless otherwise specified in the guided test. The vehicle continues to operate as designed. Further causes should be investigated if complaint of check engine light is received. If fault code P06DA00 is activating the check engine light, update software of the ME control unit. No further repairs needed if the code no longer activates check engine light after 2 drive cycles. Model year 2019 and later Fault code P06DA00 will activate check engine light as of model year 2019. No driveability concerns will be observed, only illumination of the CEL. This fault code indicates high resistance or open in the circuit to Y130 oil pump control valve. Perform guided test for component Y130 under list of tests in ME. Diagnose location of high resistance or open in Y130 circuit and repair as necessary. Warranty claims submitted without supporting guided test results may be subject to debit.
- 10241790The Mercedes me connect services cannot be activated. The remote status data does not update. Error in N112/9 - control unit for telematics services (HERMES). In the HERMES control unit log, under the "URL" tab, the value DEFAULT is stored for "atpServerUrl" and/or "rcsServerUrl". Please carry out a re-commissioning of the control unit N112/9 - Control unit for telematics services (HERMES), which includes both a software update as well as coding. The fault will be rectified by the newly included coding. As a result of the software update to the current software of the control unit N112/9 - Control unit for telematics services (HERMES), this fault will no longer occur in future.
- 10205841Spare wheel.
- 10205247Traffic information service and posibly the voice control, nonfunctional after navigation software update.
- 10205237The COMAND unit does not start or the display remains dark.
- 10205234Software update of COMAND Online control unit.
- 10205233Mobile phone cotacts are not transferred completely.
- 10205218New roller blind with blind bearing does not fit in previous panoramic with old roof mechanisms or blind guide rails.
- 10205200Parktronic inoperable.
- 10205156Intial startup not possible after replacement of transmisson 725.0 or of electrohydraulic controller unit.
- 10205154Gasket may settle causing a slight oil leak.
- 10199675Vibrations/ humming when moving off or maneuvering with the wheels turned
- 10187793Mercedes-Benz AG (?MBAG?), the manufacturer of Mercedes-Benz, has determined that on certain Model Year (?MY?) 2013-2017 B-Class, C-Class, CLA-Class, CLS-Class, E-Class, G-Class, GL-Class, GLA-Class, GLC-Class, GLE-Class, GLK-Class, GLS-Class, GT-Class, M-Class, S-Class, SL-Class, and SLK-Class (117, 156, 166, 172, 190, 204, 205, 207, 212, 217, 218, 222, 231, 242, 253, 292, and 463 platform), the software for the PASS control unit does not meet current series production configuration and therefore the possibility exists that a correct GPS position cannot be determined in the control unit for location based services, and an incorrect vehicle position may be displayed. Please note the E-call feature is not impacted by this issue. What We?re Doing MBUSA will conduct a Service Campaign. An authorized Mercedes-Benz dealer will update the PASS Control Unit Software
- 10183259Mercedes-Benz AG (?MBAG?), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (?MY?) 2012-2015 Mercedes-Benz Model 204 and 172 vehicles (C250 and SLK250), the warranty on the camshaft adjuster will be extended from the original 4 years/50,000 miles to 10 years/120,000 miles (whichever occurs first) from the original warranty start date.
- 10179966Incorrect time and/or instrument cluster message "SOS, service not activated" and/or Mercedes Me connect services nonfunctional
- 10179907Engine diagnosis warning lamp activated - Fault code P012800
- 10179904Implausible "service due" instrument cluster message, head unit pop-up, or Mmc message
- 10177571Lamp unit fogged or droplets forming. Due to the vent openings, the lamp unit is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate it. This can result in deposits on the diffuser and lens. Check housing cover of lamp unit for natural fogging or dew as per GI82.10-P-009047. . 1. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. 1.1. Order the required service covers by referring to the variant overview. 1.2. Remove lamp unit 1.3. Remove all grommets from vent openings. 1.4. Seal vent openings with sealing profile. Important: All openings must be sealed carefully for the pressure compensation membrane to work properly! 1.5. Remove existing service cover 1.6. Place desiccant packs in new service covers and bolt down 1.7. Stick new diaphragm onto specified surface on service cover [picture of service cover] Note: The bonding surface must be clean and dry. 06
- 10176670To enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a settlement regarding claims relating to alleged mold and mildew type odors originating from the HVAC system in certain Mercedes-Benz vehicles. As part of the settlement, MBUSA has agreed to offer sliding-scale warranty coverage for certain vehicles diagnosed as having mold or mildew type odors originating from the HVAC system?although that coverage will not take effect until the settlement is judicially approved and other events occur; likely not until December 7, 2020 at the earliest (see below). If the settlement becomes effective, coverage will include cleaning of the evaporator and replacement of the HVAC filters
- 10171637Retrofitted front door exit lamps with logo projection flicker
- 10169602Replace Steering Gear Bolts
- 10169599Squeaking Noise from Exhaust Gas Flap
- 10167551Vehicle wanders to the left or right.
- 10167550Single, throttle lift-off, clunking noise from the side shaft when starting off (audible at the wheel). The clunk is heard once when changing from forward to reverse (and vice versa).
- 10167518Creaking noises in area of center console
- 10167517The center stowage compartment does on close or open smoothly.
- 10167512ESP, BAS, PRE-SAFE, HOLD function, Hill-Start Assist and ESP trailer stabilization are unavailable due to a malfunction. Also the adaptive brake lights, Adaptive Brake Assist and/or ATTENTION ASSIST may have failed or be deactivated. The brake system continues to operate with normal effectiveness. The support functions listed may have failed, but are available again after an ignition off/on cycle. One or more of the faults relating to the accelerator pedal (B37) listed under 'Control unit / Fault code' are stored in the engine control unit. Consequential faults may be stored in the ESP; see also under 'Control unit / Fault code'.
Every Mercedes-Benz CLA250 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.