2015 Mercedes-Benz CLA250
Safety record from NHTSA: recalls, owner complaints, investigations and service bulletins.
Have the VIN?
Vehicles › Mercedes-Benz › CLA250 › 2015
These records cover every 2015 Mercedes-Benz CLA250. To see whether one car still needs a recall repair, decode its VIN or check it with NHTSA.
Recalls
7 recalls name the 2015 Mercedes-Benz CLA250. Newest first.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2014-2020 C-Class, CLA, GLA, S-Class, GLC, and GLE vehicles. Please refer to MBUSA's recall report for specific vehicle details. The front roof panel located between the windshield and the panoramic sunroof may not have been bonded correctly to the vehicle during a prior repair, allowing the front panel…
Risk and remedy
Risk
A detached roof panel can become a road hazard, increasing the risk of a crash.
Remedy
Dealers will replace the front panel, free of charge. Owner notification letters were mailed on August 2, 2024. Owner notification letters will be mailed in phases, on, March 22,2024, and August 2, 2024. Owners may contact MBUSA customer service at 1-800-367-6372. This recall is an expansion of NHTSA recall number 21V-197.
Mercedes-Benz USA, LLC (MBUSA) is recalling certain 2017-2020 C300 Coupe, C43 Coupe AMG, C43 AMG, 2015-2020 C300, GLA250, 2016-2018 C350e, CLA45 Coupe AMG, 2015 C400, S65 AMG, 2015-2019 C63 AMG, 2016 C450, 2015-2016 GLA45 AMG, S600, 2016-2020 GLC300, 2017-2019 GLC43 AMG, GLE43 Coupe AMG, 2014-2019 CLA250 Coupe, 2014-2015 CLA45 AMG, 2018 GLC63 AMG, 2014-2017…
Risk and remedy
Risk
The adhesive bonding of the front panel might deteriorate, possibly causing the front panel to detach from the vehicle and become a road hazard, increasing the risk of a crash.
Remedy
Mercedes-Benz dealer will remove the bonded panel and will install a new front panel by following the detailed repair instructions and using the approved primer, cleaner and adhesive, free of charge. Owner notification letters were mailed on September 3, 2021 and October 26, 2021. Owners may contact MBUSA customer service at 1-800-367-6372.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2015-2018 CLA250 and CLA250 4MATIC, and 2017-2018 CLA45 AMG vehicles. The Occupant Classification System (OCS) may have been improperly calibrated, which may prevent the proper deployment of the front passenger air bag.
Risk and remedy
Risk
In the event of a crash, if the air bag does not deploy as designed, the front seat passenger has an increased risk of an injury.
Remedy
MBUSA will notify owners, and dealers will replace the passenger seat cushion, free of charge. The recall began July 31, 2020. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2020060012.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2013-2017 vehicles due to a software fault that may cause the date and time for the emergency call system (eCall) to differ from the actual date and time, potentially relaying an inaccurate vehicle location. For a full list of the affected models visit…
Risk and remedy
Risk
An inaccurate vehicle location may delay emergency responders, increasing the risk of injury.
Remedy
MBUSA has initiated an Over the Air (OTA) remote update. MBUSA will also notify owners, and dealers will check software for a successful OTA or update the communication module software as needed, free of charge. The recall began December 23, 2019. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2019120008.
Mercedes-Benz USA, LLC. (MBUSA) is recalling these vehicles: 2014-2018 CLA250, CLA250 4Matic, CLA45 AMG 4Matic, 2015-2018 GLA250, GLA250 4Matic, GLA45 AMG 4Matic, C300 4Matic, C63S AMG, 2012-2014 C250, C350, C300 4Matic, E550 4Matic, 2013-2014 C63 AMG, 2012-2015 C250 Coupe, C350 Coupe, C63 AMG Coupe, 2013-2015 C350 4Matic Coupe, GLK250 4Matic BlueTec…
Risk and remedy
Risk
If the driver air bag inadvertently deploys, it can increase the risk of injury and a crash.
Remedy
MBUSA will notify owners, and dealers will add sufficient grounding to the steering components, free of charge. The recall began in December 6, 2017. Owners may contact MBUSA customer service at 1-877-496-3691.
Mercedes-Benz USA, LLC. (MBUSA) is recalling certain 2015-2017 C300 4Matic, C300, CLA250, CLA250 4Matic and CLA45 AMG vehicles, 2017 C300 4Matic Cabrio, C300 4Matic Coupe, C300 Cabrio, C300 Coupe, E300, E300 4Matic, E400 4Matic Wagon, E43 AMG 4Matic, GLA250, GLA250 4Matic and GLC300 4Matic Coupe vehicles and 2016 C350e and GLC300 vehicles and 2016-2017 C450…
Risk and remedy
Risk
If the starting current limiter overheats, the surrounding components can melt, increasing the risk of a fire.
Remedy
MBUSA will notify owners, and dealers will install an additional fuse in the electrical line to the starter, free of charge. The recall began August 31, 2017. Owners may contact MBUSA customer service at 1-800-367-6372. MBUSA's number for this recall is 2017080002.
Mercedes-Benz USA, LLC (Mercedes-Benz) is recalling certain model year 2015 CLA250, CLA250 4Matic, GLA250, GLA250 4Matic, and 2016 SLK300 roadster vehicles manufactured July 17, 2015, to August 31, 2015. The affected vehicles have intake or exhaust camshafts whose welds may fail and possibly cause engine damage.
Risk and remedy
Risk
Engine damage may result in a stall, increasing the risk of a crash.
Remedy
Mercedes-Benz will notify owners, and dealers will replace the affected camshafts, free of charge. Interim notices were mailed to owners on December 9, 2015. The recall began on December 23, 2015. Owners may contact Mercedes-Benz customer service at 1-800-367-6372. Mercedes-Benz's number for this recall is 2015100006.
Owner complaints
61 complaints5 involved a crash4 injuries
What owners report most
Latest complaints
- Unknown or other
UNKNOWN- The check engine light came on and was taken for a diagnostic test and it returned a P052E code. This indicates a fault in the Positive Crankcase Ventilation Regulator Valve performance. This is a known issue with Mercedes Benz as there has been a recall for all the models except the CLA.
- Unknown or other
I was driving to work on Thursday, September 11th. Suddenly, I heard a loud noise like an explosion. Upon checking, I saw that my sunroof had exploded, shattering glass everywhere. The loud noise startled me, causing me to almost have an accident. I managed to pull over, check my vehicle, and drive it back home. I've contacted my insurance company and documented the damage with photos.
- Air bags · Electrical system · Engine and engine cooling
The contact owns a 2015 Mercedes-Benz CLA250. The contact stated that the air bag warning light was illuminated. The contact stated that the vehicle was previously involved in a collision, in which another vehicle crashed into the passenger's side of the vehicle, causing damage to the frame and…
The contact owns a 2015 Mercedes-Benz CLA250. The contact stated that the air bag warning light was illuminated. The contact stated that the vehicle was previously involved in a collision, in which another vehicle crashed into the passenger's side of the vehicle, causing damage to the frame and headlights; however, the air bags failed to deploy. The contact sustained soreness in the neck and back and received medical assistance. A police report was filed, but the contact did not have the police report information available. Additionally, the contact stated that while driving at 65 MPH, the vehicle stalled. The contact pulled to the shoulder of the road. The vehicle was able to restart; however, the failure recurred several times while driving. The contact related the failure to NHTSA Campaign Number: 15V662000(Engine and Engine Cooling). The contact stated that the vehicle had leaked excessive oil onto the ground. The contact stated that the vehicle had failed to start while pressing the Push to Start button. The vehicle was taken to the dealer, where the contact was informed that she would need to pay a fee for diagnostic testing. The vehicle was not diagnosed or repaired. The manufacturer was not notified of the vehicle. The failure mileage was approximately 80,000.
- Engine
Check Engine Light - Code P052E71 - Positive Crankcase Ventilation Valve Performance. The component failure can lead to increased exhaust gas emission, oil leaks, and internal engine damage resulting in unsafe operation. Yes, the problem has been confirmed by an independent certified service…
Check Engine Light - Code P052E71 - Positive Crankcase Ventilation Valve Performance. The component failure can lead to increased exhaust gas emission, oil leaks, and internal engine damage resulting in unsafe operation. Yes, the problem has been confirmed by an independent certified service center. This specific vehicle has not been inspected by the manufacturer, but this specific problem has been identified in other similar Mercedes-Benz years, make, and models. MBUSA LLC is only willing to apply the EMISSION EXTENDED WARRANTY to certain models within a certain model year, even though the design and engine components are nearly identical if not the same. My vehicle is the same model year and class, but a different model type and not included in the EMISSION EXTENDED WARRANTY. Repair cost can be in excess of $2,000 if not covered under the added warranty.
- Suspension
Mercedes subframes that prematurely rust or deteriorate. Mercedes has extended warranty for the mentioned parts on some models. But clearly it is not enough because more models have the same issues. This is a serious safety issues and Mercedes should have taken more responsibility.
- Power train
In November 2024, while at a stop, the car shut off. A few weeks later, while driving the car over speed tables/humps, the car shifted from drive into neutral. No warning or error lights appeared on the dashboard. It just showed that the car was now in neutral. I was able to shift back into drive…
In November 2024, while at a stop, the car shut off. A few weeks later, while driving the car over speed tables/humps, the car shifted from drive into neutral. No warning or error lights appeared on the dashboard. It just showed that the car was now in neutral. I was able to shift back into drive and continue. Fortunately, I was in a residential neighborhood, going about 10 miles per hour and had only one car behind me. This happened again in December, with the same scenario and on the same road, so I took the car to the dealer. They did a diagnostic and was not able to duplicate the problem, but said there were some error codes and it could possibly be the starter, auxiliary battery or transmisson service, since I had not done one. They also stated there was a Coolant Thermostat electrical fault code. They scheduled me to come back in January 2025 since I needed a loaner car. They kept my car for a couple of days to do a more detailed diagnostic. In the end they replaced the auxiliary battery and did a transmission service because they could not replicate the problem. Said that there was nothing in the transmission fluid of concern and, the starter code had not returned. Stated that it could have been an electrical fluke. No other codes were showing. They did say that some time in the future I would need a coolant thermostat. Car ran well for a few weeks and then in February 2025, going over the same road with speed humps, the car went into neutral. The car has been in the shop for the last 7 days and they are trying to figure out what is happening. I am submitting this because I found many other people posting on forums about having the same issue. My concern is what will happen if my car moves into neutral while I am going at a high speed. It puts me, my family and others lives in danger if my car stops suddenly.
- Engine
The contact owns a 2015 Mercedes-Benz CLA250. The contact stated that the vehicle was taken to a local dealer and the vehicle starting very rather slowly. The vehicle was diagnosed however, no cause for the failure was found. The contact stated that the vehicle operated normally; however, the…
The contact owns a 2015 Mercedes-Benz CLA250. The contact stated that the vehicle was taken to a local dealer and the vehicle starting very rather slowly. The vehicle was diagnosed however, no cause for the failure was found. The contact stated that the vehicle operated normally; however, the following day while driving approximately 50 MPH, the vehicle started to lose automotive power. The contact pulled over to the side of the highway until the vehicle came to a complete stop. The contact attempted to restart the vehicle; however, the vehicle failed to start. The vehicle was towed to the residence. The vehicle was inspected by two independent mechanics however, the contact was informed that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was not notified of the failure. The approximate failure mileage was 124,000.
- Visibility › Sun/moon roof assembly
The contact owns a 2015 Mercedes-Benz CLA250. The contact stated that after the vehicle was washed at the Car Wash, the contact opened the sunroof; however, moments later while attempting to close the sunroof, the sunroof failed to close properly. The local dealer was not contacted. The vehicle was not repaired. The manufacturer was notified of the failure. The approximate failure mileage was 69,080.
- Engine
There was a recent extended warranty issued by Mercedes-Benz to repair certain vehicle models free of charge that have a check engine light code P052E. Unfortunately my vehicle (2015 CLA 250) was not included in that recall, but the CLA250 models have the same issue and run the same risk of safety…
There was a recent extended warranty issued by Mercedes-Benz to repair certain vehicle models free of charge that have a check engine light code P052E. Unfortunately my vehicle (2015 CLA 250) was not included in that recall, but the CLA250 models have the same issue and run the same risk of safety being compromised. Now myself, and many others, have to pay a hefty out of pocket price for a malfunction that is strictly the fault of the manufacturer. Please look into this and strongly consider having Mercedes-Benz include the CLA 250 models in this warranty.
- Engine · Unknown or other
The component that malfunctioned is the Crankcase valve. This valve malfunction has caused issues will the car is idle. The issue has been confirmed by the dealership. The issue has been inspected by the manufacturer as the manufacturer has released extended warranties on other models. The…
The component that malfunctioned is the Crankcase valve. This valve malfunction has caused issues will the car is idle. The issue has been confirmed by the dealership. The issue has been inspected by the manufacturer as the manufacturer has released extended warranties on other models. The malfunction causes the check engine light to come on, however in the past it has gone off before a diagnostic test could be run; the check engine light would come on and go off then go on and go off, the exact amount of time is unknown.
- Unknown or other
The panoramic sunroof on my 2015 Mercedes Benz CLA 250 4Matic spontaneously exploded while I was driving. It was a clear sunny day with no weather and there were no vehicles in front of me that could have kicked up a rock. It sounded like a gunshot, and I scared enough that I veered into another…
The panoramic sunroof on my 2015 Mercedes Benz CLA 250 4Matic spontaneously exploded while I was driving. It was a clear sunny day with no weather and there were no vehicles in front of me that could have kicked up a rock. It sounded like a gunshot, and I scared enough that I veered into another lane. Thankfully I did not hit another vehicle. I had very small superficial cuts on my arm and back. The dealership does not acknowledge any manufacturing defect on the sunroof. After some research I have found there is an open class action lawsuit against Mercedes Benz for this exact issue. The was no warning prior to the issue. There was nothing to inspect as it was just a pile of broken class laying in my car.
- Engine
Engine light come on at about 43000 miles. Code scanner is p052e. Upon research is a common problem with Mercedes and approximately $2000 dealer repair.
- Engine
Error code P052E, relates to Crankcase Ventilation System, that requires replacement. My vehicle is under 55,000 miles and the part should last the full life of the engine. This is faulty part that the dealership requires over $4,000 to fix.
- Engine · Fuel/propulsion system · Unknown or other
I HAVE 2 MECEDES WITH THE SAME ISSUE PER MERCEDES BENZ OF USA INSPECTION CAUSING ENGINE LIGHT TO BE TRIGGERED PER DIAGNOSIS TESTING RAN ON BOTH CARS. 2015 VIN [XXX] GLA 250 4 MATIC 2016 VIN [XXX] CLA 250 MATIC I WAS TOLD BY A MERCEDES SERVICES ADVISOR THAT BOTH CARS HAVE THE SAME ENGINE FOR A…
I HAVE 2 MECEDES WITH THE SAME ISSUE PER MERCEDES BENZ OF USA INSPECTION CAUSING ENGINE LIGHT TO BE TRIGGERED PER DIAGNOSIS TESTING RAN ON BOTH CARS. 2015 VIN [XXX] GLA 250 4 MATIC 2016 VIN [XXX] CLA 250 MATIC I WAS TOLD BY A MERCEDES SERVICES ADVISOR THAT BOTH CARS HAVE THE SAME ENGINE FOR A 2015GLA AND A 2016 CLA - BOTH Due to both cars stalling in traffic on multiple time when driving I took both to the shop to run further testing to discover both had the same engine light trigger which is the CRANKSHAFT (AKA) OIL SEPERATOR (AKA)INTAKE TUBE DUE TO THIS BOTH CARS HAVE SUFFERED AN ISSUE WHEN TAKING EMMISSION TEST - MERCEDES DIGNOSIS TESTING CODES -P052E71- CRANKSHAFT VENTILATION MALFUNCTION - CAR WILL NOT PASS EMISSION TEST AND THIS PART DEFECTS ALSO CAUSES CAR TO STALL THAT CAN POSSIBLE CAUSE ACCIDENT THIS PART COMPLETE REPAIR COULD COST UP TO $2500-$3000 FOR PARTS AND LABOR PART NUMBER -270-090-07-00 (CRANKSHAFT) THE ENGINE LIGHT ISSUE TRIGGERED BY CRANKSHAFT AND WILL NOT PASS EMMISSION TESTING DUE TO THIS Description of this part below: Crankcase Ventilation is the process of venting or removing blow-by from an engine's crankcase to prevent excessive pressure build-up within the engine. Blow-by gases are mixed with oil mist and other contaminants that can harm an engine's internal components and contaminate the environment. How does the crankshaft ventilation work- When the vehicle is moving, airflow across the open end of the tube creates suction (a "draught" or draft) that pulls gases out of the crankcase. To prevent too much vacuum being created, the blow-by gases are replaced by fresh air using a device called a breather. The breather is often located in the oil cap. the engine misfires, you may have trouble getting your vehicle up to speed. Misfires often happen when your vehicle is under load while accelerating. This can result in slow or sluggish acceleration or a jerking motion while pressing down on the accel INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA),
- Visibility › Sun/moon roof assembly
The contact owns a 2015 Mercedes-Benz CLA250. The contact stated that the sunroof panel was not working properly and failed to close. The vehicle was not diagnosed or repaired by an independent mechanic or the dealer. The manufacturer was made aware of the failure and referred the contact the NHTSA Hotline for assistance. The failure mileage was 32,610.
- Power train
The head unit for the sound system begins a reset loop when navigating radio station and/or connecting bluetooth device. Seems to be a glitch in the head unit software. This is preventing use of navigation/GPS screen, backup camera, and Bluetooth connection.
- Structure
The contact owns a 2015 Mercedes-Benz CLA250. The contact stated while driving 55 MPH, there was an abnormal sound coming from the vehicle. There was no warning light illuminated. The contact arrived at his destination and became aware that the roof panel had detached from the vehicle. The vehicle…
The contact owns a 2015 Mercedes-Benz CLA250. The contact stated while driving 55 MPH, there was an abnormal sound coming from the vehicle. There was no warning light illuminated. The contact arrived at his destination and became aware that the roof panel had detached from the vehicle. The vehicle was diagnosed, and it was confirmed that the adhesive used to hold the glass panel was insufficient. The vehicle was not repaired. The manufacturer was made aware of the failure and provided a loaner vehicle and referred the contact to the NHTSA Hotline. The failure mileage was approximately 25,000.
- Unknown or other
I was driving down the highway yesterday when my Front Stationary Sunroof Panel flew off the top of the vehicle onto ongoing traffic. I have attached a picture of the exposed panel area now that the panel is gone. Thankfully it looks like it hit the ground before it could hit another vehicle. I…
I was driving down the highway yesterday when my Front Stationary Sunroof Panel flew off the top of the vehicle onto ongoing traffic. I have attached a picture of the exposed panel area now that the panel is gone. Thankfully it looks like it hit the ground before it could hit another vehicle. I came on here to see if there was a recall on that piece since it just flew off and it seems there was but my VIN number must not be included. This makes no sense since my vehicle is in the same year and model as the other recalls. This issue could have hit another car and seriously hurt someone this needs to be addressed on all those vehicles. The recall I found is Campaign number 2021070010, NHTSA ID: 21V197.
- Power train
The contact owns a 2015 Mercedes-Benz CLA250. The contact stated that while driving at various speeds, the vehicle would independently shift into neutral(N). The contact also stated that the check engine warning light flashed on the instrument panel after the second failure. The contact called the…
The contact owns a 2015 Mercedes-Benz CLA250. The contact stated that while driving at various speeds, the vehicle would independently shift into neutral(N). The contact also stated that the check engine warning light flashed on the instrument panel after the second failure. The contact called the dealer and scheduled an appointment with the dealer. The manufacturer was notified of the failure. The vehicle was not repaired. The failure mileage was approximately 61,000.
- Tires
Normal driving, daily driver. The rubber around the inner and outer sidewalls seems soft and tears easily. I have a matching set of these tires on my car, same brand and type, 4 altogether. I have multiple large torn chucks & tears in the rubber around the sidewall of these tires. The middle…
Normal driving, daily driver. The rubber around the inner and outer sidewalls seems soft and tears easily. I have a matching set of these tires on my car, same brand and type, 4 altogether. I have multiple large torn chucks & tears in the rubber around the sidewall of these tires. The middle section (non-sidewall) seems fine with normal wear. I have lifetime alignment and rotate and balance on these tires when purchased, and maintain this service. I have not seen this issue on other continentals in the past, and the wear is excessive on this brand.
- Structure › Body · Unknown or other
On May 10th while driving on I-35 Texas highway, San Antonio Texas, the panoramic sunroof of our 2015 Mercedes Benz CLA 250 completely shattered while wife driving and daughter as a passenger, they heard a big bang and suddenly pieces of shattered glass fell all over the interior some of the…
On May 10th while driving on I-35 Texas highway, San Antonio Texas, the panoramic sunroof of our 2015 Mercedes Benz CLA 250 completely shattered while wife driving and daughter as a passenger, they heard a big bang and suddenly pieces of shattered glass fell all over the interior some of the glass hitting my wife and daughter in the face, they immediately pulled over to evaluate the situation. This could have caused an accident or significant injury. She had SAPD meet her at a gas station as she thought someone has shot at the glass, but officer confirmed that indeed the panoramic sunroof completely shattered. We tried to fix the panoramic roof and both Mercedes dealerships in San Antonio and Boerne Texas refused to repair the panoramic sunroof, we had to file a claim with our insurance and take the car to a collision center. The collision center stated that the sunroof was on back order from Mercedes Corp and had no timeline as to when the part would be available. Due to the car was not safe to drive and timeline on the parts, our insurance offered to total the car, but the car is almost new, low miles and in perfect mechanical condition so we declined. We received a call 4 months later that the car was fixed and the panoramic roof was installed.
- Structure › Body
On May 10th while driving on I-35 Texas highway, the panoramic sunroof of our 2015 Mercedes Benz CLA 250 shattered the whole panoramic sunroof, my daughter describes as some shot at the car. there was particles of glass on the driver side and passenger, very dangerous situation. She pulled over…
On May 10th while driving on I-35 Texas highway, the panoramic sunroof of our 2015 Mercedes Benz CLA 250 shattered the whole panoramic sunroof, my daughter describes as some shot at the car. there was particles of glass on the driver side and passenger, very dangerous situation. She pulled over into a gas station and noticed there were pieces of glass shattered all over the interior some. The second incident happed about 2 weeks ago on the recalled part, while driving the panoramic sunroof stationary roof panel located between the windshield and the panoramic sunroof part came off while driving and hit the behind, luckily no one was harmed during the incident. I took the recalled letter to the local Mercedes in San Antonio refusing to fix the recalled part and apparently the part is not available and there is no date as to when is going to be available, in the meanwhile we can't drive the car. Also it took almost 4 months to replace the panoramic roof, I will file another complaint about the panoramic roof, apparently this is a common thing with this model CLA250.
- Engine · Unknown or other
I noticed for the last several weeks my car sometimes hesitates when I start the engine. I hadn't looked into it and wasn't sure what it could be because I changed my battery less than 2 years ago. I hoped it was a fluke or do to the increasing cold weather. Also the car occasionally shudders and…
I noticed for the last several weeks my car sometimes hesitates when I start the engine. I hadn't looked into it and wasn't sure what it could be because I changed my battery less than 2 years ago. I hoped it was a fluke or do to the increasing cold weather. Also the car occasionally shudders and hesitates when I increase and decrease speed and one or two the radio shut off on it's own. This morning, the automatic windshield wipers came on even though it was not raining and my windshield was not wet. This lasted for a few minutes before it stopped on it own. Then I drove about a mile and was at a stop light. When I eventually tried to accelerate, I wasn't able to and it was then that I noticed my car had slipped to neutral on it's own. I was on a busy road when this happened. The car also restarted on its own and I was able to shift to drive and continue driving. Thinking this was a fluke or perhaps a battery issue, I continued to drive for a few more minutes and again I found myself at a stop light and again, the car slipped into neutral. I quickly put my emergency lights on and restarted the car. The radio came but on, but I noticed the A/C did not come back on. I didn't bother turning it back on. I was able to drive 23 miles to my destination with no other incident. The majority of the 23 mile drive, after the car had stopped 2 times, was highway driving, so I did not need to stop much.
- Back over prevention › Warnings · Structure › Body · Vehicle speed control
Incident on 10/18/21, while coasting into a parking space, my car suddenly accelerated and smashed into a concrete wall. Damage was extensive and car was determined a loss. Service was maintained throughout ownership. There was no warning, no lights, messages, no ABS brakes. Airbag did not…
Incident on 10/18/21, while coasting into a parking space, my car suddenly accelerated and smashed into a concrete wall. Damage was extensive and car was determined a loss. Service was maintained throughout ownership. There was no warning, no lights, messages, no ABS brakes. Airbag did not deploy. Extensive seatbelt bruising. I'm upset car was a loss but I would never feel safe driving it. It was as if someone else had taken over control and I was powerless to alter the situation.
- Fuel/propulsion system
Inyector down after fueling gas
Defect investigations
NHTSA’s Office of Defects Investigation opened these reviews into vehicles including this one.
- Desiccated Air Bag Inflator Rupture
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant…
From 2000 through 2017, Takata produced millions of air bag inflators using two types of phase-stabilized ammonium nitrate ("PSAN") propellant -- propellant 2004 and propellant 2004L. After prolonged exposure to high temperature cycles and humidity, inflators using propellant 2004 can degrade, causing the propellant to burn too quickly when ignited. The rapid burning can cause the inflator to rupture during deployment, potentially causing serious or even fatal injury to vehicle occupants. See 2016 Blomquist Report at www.nhtsa.gov/sites/nhtsa.gov/files/documents/expert_report-hrblomquist.pdf.Consequently, all frontal inflators using propellant 2004 that do not contain a "desiccant" (a substance that traps and holds moisture) in US vehicles are under recall. These "non-desiccated" inflators either have been or are required to be replaced.In some cases, the remedy part for these recalled inflators was, or will be, an inflator using either propellant 2004 or 2004L that does contain a desiccant. None of these "desiccated" remedy parts (which were installed in older model year vehicles) are currently under recall for a degradation concern. Certain subsets of desiccated PSAN inflators using propellant 2004 for use as original equipment, however, have been recalled for a degradation concern. All Takata inflators produced with propellant 2004L contain desiccant, and none of these desiccated inflators using propellant 2004L are under recall for a degradation concern. There have been no reported field ruptures in any non-recalled desiccated PSAN inflators.It is understood that desiccants fully saturate at some threshold, at which point any additional moisture will not be captured. This means the degradation process observed in non-desiccated inflators using propellant 2004 may also occur in non-recalled desiccated inflators using propellant 2004, assuming additional moisture enters the inflator and high temperature cycling occurs. Based on available information, desiccant saturation can occur within the first five years in the worst environments, and the time required for full saturation is affected by multiple factors. While no present safety risk has been identified, further work is needed to evaluate the future risk of non-recalled desiccated inflators using propellant 2004.Three entities -- Takata (now known as TK Global), the Independent Testing Coalition, and Exponent -- have been studying the long-term behavior of Takata desiccated PSAN inflators using propellant 2004L (as well as 2004) in the presence of moisture and temperature cycling. The research efforts, which include development of predictive modeling techniques and field sample analysis, are ongoing. To date, none of the researchers have identified field evidence showing that propellant 2004L is undergoing a degradation process that leads to aggressive deployment and potential rupture. However, the time in service of such inflators remains short compared to that of the inflators using propellant 2004. Further study is needed to assess the long-term safety of desiccated inflators using propellant 2004L.The Office of Defects Investigation is opening this investigation to examine whether a safety defect related to propellant degradation exists in non-recalled desiccated PSAN frontal inflators manufactured by Takata. This investigation will require extensive information on Takata production processes and surveys of inflators in the field. Lists of recall actions that may have used desiccated PSAN inflators as remedy parts, as well as the makes and models originally manufactured with them, is available with the downloadable version of this document (see nhtsa.gov/recalls?nhtsaId=EA21002 -- note this information is subject to change/revision as the investigation proceeds). This investigation does not supersede EA15-001, which remains open.
- Front Roof Panel Detachment
On January 8, 2021, after ongoing review with Mercedes Benz, the National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation (ODI) opened PE21-001 to assess allegations of front roof panel detachments while driving at highway speeds in certain 2015 Mercedes-Benz (Mercedes) C-Class…
On January 8, 2021, after ongoing review with Mercedes Benz, the National Highway Traffic Safety Administration (NHTSA) Office of Defects Investigation (ODI) opened PE21-001 to assess allegations of front roof panel detachments while driving at highway speeds in certain 2015 Mercedes-Benz (Mercedes) C-Class vehicles.The subject front roof panel is a stationary panel composed of polycarbonate and is attached to the vehicle via adhesive at the time of manufacture. The panel is found on subject vehicles equipped with panoramic sunroofs. Over time, the subject panels may exhibit cosmetic degradation leading to replacement of the panel, a procedure which entails: removal of the old panel and adhesive, site preparation, and installation of a replacement panel with new adhesive.The consumer complaints that prompted the opening of PE21-001 all described detachments of front roof panels that had been replaced after the vehicle was put into service.Mercedes' internal investigation identified a broader scope of affected vehicles (2014-2020 CLA, GLA, C, S, GLC, and GLE class) and found the following potential service procedure- related causes of front roof panel detachments:- Improper surface pretreatments such as the use of the wrong primer or cleaner or scoring of the surface; or - Use of the incorrect adhesive.These conditions lead to a front roof panel bond that, even if sound at the time of repair, cannot maintain its strength over time and environmental exposure.Mercedes updated its service and parts ordering systems to reinforce the proper use of specified kits and procedures via webinars, shop foreman meetings, and explicit reference to the risks incurred by diverging from the repair procedures. Mercedes is also furnishing parts ordering assistance, and will hold dealerships accountable for improper repairs.ODI's analysis of the ten complaints it has received from the public (VOQ's) and MBUSA's complaint data submitted in response to the information request letter for PE21-001 identified a total of 57 non-duplicative reports alleging incidents in which the front roof panel detached from the vehicle while in motion. Included within the 57 reports are incidents where consumers state the panel detached ...and flew off into traffic.On March 19, 2021, Mercedes notified NHTSA that it would recall subject vehicles with front roof panels known to have been replaced after the original sale of the vehicle. In total, the recall (designated as Recall 21V197) covers 15,099 vehicles that were ever registered in the United States. Based on Recall 21V197 and the remedy implemented by Mercedes, further investigation does not appear to be warranted at this time.Accordingly, this investigation is closed.The ODI complaints cited above can be viewed at www.nhtsa.gov under the following ODI identification numbers: 11376425, 11352686, 11351629, 11349158, 11341541, 11337594, 11324100, 11311591, 11222127, 11404183
Service bulletins
Technical service bulletins and other communications the manufacturer sent dealers about this vehicle. Ask a dealer for the full document by its number.
- 11010818Complaint Transmission control unit Y3/8n4 (fully integrated transmission control unit (VGS)) not listed in quick test and/or no communication possible with VGS. Cause Transmission control unit Y3/8n4 Remedy It is important that LI54.15-P-057373 is processed before replacing any component parts (transmission 722.9). After processing and complying with the above documents, perform a reset on the transmission control unit Y3/8n4 (VGS) (ignition reset), check that the transmission connector is seated correctly and inspect the PINs for concerns. If communication with the VGS cannot be established afterwards, the component part 'electrohydraulic controller unit (EHS)' must be replaced, as it is not possible to transfer the valve characteristics under the above-mentioned conditions. Installation of a VGS repair kit is not permitted in this case.
- 11010755Complaint After a control unit replacement of "N112/9 - control unit for telematics services (HERMES)" or the "N112/2 - control unit for telematics services (RAMSES)", the Digital Extras (previously Mercedes me) cannot be activated. The DTC B15CE00 is active or active+saved. In vehicles with "N112/9 - control unit for telematics services (HERMES)": The message "SOS - service not activated" permanently lights up in the instrument cluster AND the actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/9 - control unit for telematics services (HERMES)", the registration error "CEP Invalid VIN/UniqueID combination" is displayed. In vehicles with "N112/2 - control unit for telematics services (RAMSES)": The actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/2 - control unit for telematics services (RAMSES)", the registration error "CEP_ VIN_UNIQUEID_INVALID" is displayed. The emergency call is not impaired. Cause In the event of a control unit replacement, sporadic problems in the back end could result in data from the new control unit not being updated in the back end system. Remedy Please create a TIPS case. In some cases, the problem rectifies itself on its own after a little while.
- 11010494Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress). Note: -If no reduction in the degree of fogging is visible, the rear lamp is defective and must be replaced. -It is not physically possible to defog the headlamps completely some residual fogging may remain. Fogging does not impair the functionality or the service life of the rear lamps. -Simultaneous fogging of multiple component parts indicates extreme climatic conditions and also does not impair the functionality or the service life of the rear lamps. Remedy 2: You can recognize a defective rear lamp as follows: 1. Check the rear lamps to ensure that no external damage is present, and that the differential aeration cells and the diaphragm are present and correctly seated. -> If there are signs of external damage on the rear lamp, the component parts must be replaced as per WIS instructions. 2. Check the electrical connectors of the plugs and pins. -> If moisture/corrosion/etc. is present, the component part must be replaced as per WIS instructions. 3. Check for leak tightness -> Close all openings with Terostat IX or similar and establish and stabilize via an overpressure (4050 mbar) via the plug. -> In the event of a sudden pressure drop, the component part must be replaced as per WIS instructions. Note: External damage to the rear lamps does not constitute a warranty or goodwill case.
- 11009122Complaint Washer fluid system leaks Cause Various possible causes: 1. Washer fluid reservoir itself. 2. Seal on washer fluid pump/washer fluid reservoir. 3. Washer fluid pump. 3.1. Distributor housing leaks. 3.2. Pump fitting leaks. 3.3. Washer fluid hose cannot be snapped into place on pump fitting. 3.4. Washer fluid hose will not stay on pump fitting, although connector OK. 4. Washer fluid line. 4.1 Connector will not stay on pump fitting because it is broken. 4.2 Sealing ring in connector missing. 4.3 Sealing ring in connector fitted, but deformed and therefore leaks. 4.4 Damage to washer line by animal. 5. Seal on heating washer fluid reservoir/washer fluid reservoir. Remedy Replace defective component parts only. Do not replace any adjacent component parts that are intact. Note: Repair kits for washer line hoses do exist to allow patches for line damage.
- 11008880Complaint After a control unit replacement of "N112/9 - control unit for telematics services (HERMES)" or the "N112/2 - control unit for telematics services (RAMSES)", the Digital Extras (previously Mercedes me) cannot be activated. The DTC B15CE00 is active or active+saved. In vehicles with "N112/9 - control unit for telematics services (HERMES)": The message "SOS - service not activated" permanently lights up in the instrument cluster AND the actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/9 - control unit for telematics services (HERMES)", the registration error "CEP Invalid VIN/UniqueID combination" is displayed. In vehicles with "N112/2 - control unit for telematics services (RAMSES)": The actual value "Error when replacing certificate (CEP.36)" is displayed in the actual values for the activation status under "Registration status" (see picture 1). In the control unit log of the "N112/2 - control unit for telematics services (RAMSES)", the registration error "CEP_ VIN_UNIQUEID_INVALID" is displayed. The emergency call is not impaired. Cause In the event of a control unit replacement, sporadic problems in the back end could result in data from the new control unit not being updated in the back end system. Remedy Please create a TIPS case. In some cases, the problem rectifies itself on its own after a little while.
- 11008712Complaint Check engine light on. One of the below fault codes is current in the engine control module (N3/10). P04DB29, P04DB31, P04DB79 Cause Open circuit or high resistance to crankcase vent line contact Remedy 1. Check the electrical connector for the relevant vent line contact switch noted below. Refer to attached photos of connection locations. 2. Ensure the bolted connection is secure and bolt can be torqued (9Nm). 3. Check continuity from vent line connection to ME control unit. Repair wire if damage is found. The circuit from ME provides 5V and is pulled to 0V when the ground connection is intact. M260 P04DB31- S88/15 P04DB79- S88/16 M264 P04DB31- S88/15 P04DB79- S88/16 P04DB29- S88/17 M270/M274 P04DB79- S88/5 Note: This repair is not warrantable if the connection was left loose during previous repair/maintenance.
- 11008323Complaint Headlamps fogged or droplets forming. Cause Due to its outlet openings, the headlamp is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate into the headlamp. This can lead to the formation of condensation on the lens of the headlamp. The headlamps comply with all applicable US standards and regulations. Remedy Check housing cover of lamp unit for natural fogging or condensation as per LI82.10-P-078301. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. Note: Order service covers and desiccant packs based on the validity description. 1. Remove headlamps. 2. Remove all grommets from outlet openings. 3. Seal vent openings with sealing profile. Important: All openings must be sealed carefully for the pressure compensation diaphragm to work properly! 4. Remove existing service cover. 5. Place desiccant packs into the new service covers and bolt down (Picture_01). 6. Glue the new diaphragm onto the intended surface at the service cover (Picture_02). Note: The bonding surface must be clean and dry. 7. Attach service cover with desiccant pack at headlamp. 8. Install headlamp. To ensure that the desiccant pack (absorption) acts effectively, the headlamp has to be air-sealed. Observe or check the following points for this: 1. Seals at the central connector must all be present and correctly fitted (Picture_03). 2. The new transparent diaphragm must be correctly bonded (Picture_04). 3. Check headlamp housing for any external damage.
- 11008091Complaint During a phone call, the called party has difficulty understanding/cannot understand the driver, or interference/background noises are audible to the called party during a call. It becomes increasingly difficult to understand as the speed rises. Cause A. Seating of the microphones in the headliner. Side edges are covered by the textile cover (see picture "1") B. Assembly of microphones (B25/20 or B25/21) in the headliner. C. Dirt inside the microphone housing Remedy 1. Press finger on rear of microphone (on adhesive tape) 2. Remove microphone cap from the front 3. Eliminate protruding material residues of the microphone cutout at the headliner, e.g. with a soldering iron. The microphone must be seated in the headliner as shown in picture "2". 4. Push microphone from behind until it is firmly pressed into the headliner 5. Maintain pressure and press/clip cap into microphone from the front. Note: The cover cap must be clearly heard and felt to engage. 6. This procedure must be carried out on both microphones (B25/20 and B25/21) Note: It is recommended to replace the cover caps. The non-woven cloth in the cover cap protects the microphone from soiling and must not be removed. NOTE: The information contained in this document is intended for use by trained, professional technicians with the knowledge to properly and safely perform diagnosis and repairs on Mercedes-Benz vehicles, using Mercedes-Benz approved tools and equipment. It informs service technicians about conditions that could occur in certain vehicles and provides information that could assist in proper vehicle diagnosis, service, or repair. It does not indicate that a defect is present in any vehicle referenced in this document nor does it imply warranty coverage. DO NOT assume that a symptom or condition, or a described cause of a symptom or condition, affects any particular vehicle or groups of vehicles, or that a described repair applies to any particular vehicle or groups of vehicles. There can be multiple causes resulting in the same or similar symptoms or conditions described in this document, and trained professional service technicians must use their diagnostic skills to make evaluations on a case-by-case basis. The information contained in this document does not guarantee warranty coverage nor does it extend the vehicles warranty in any way.
- 11007974Complaint Headlamps leaking or fogged Cause The fogging of the headlamp is a natural phenomenon which can occur under certain climatic conditions. In contrast to a leaky headlamp, physical fogging does not result in a technical impairment of the headlamp. A leak test must be performed to determine if physical fogging exists or if the headlamp is leaky. Remedy In advance, observe LI82.10-P-078301 "Headlamps or Front Fog Lamps Leaking or Fogged". 1. Prepare headlamp/check for external damage: For headlamps with a closed system 1. Check the headlamps for any external damage and check also for correct seating of the Gore-diaphragm/correct latching of the cover caps. 2. If the headlamp exhibits any external damage, replace the headlamp. For headlamps with an open system 1. Check the headlamps for any external damage and seal off the vent then make sure the cover caps are latched correctly into place. 2. If the headlamp exhibits any external damage, replace the headlamp. Note: A headlamp with external damage is not a warranty or goodwill case. 2. Leak test of headlamp with overpressure: Connect test adapter to pressure tester. (Figure 1) Check test adapter for leak tightness. To do so, connect plug and coupling (picture 2) and apply a maximum overpressure of 30 mbar. The pressure must remain constant. If the pressure does not remain constant, use a new adapter. Seal all the outlet openings using sealing compound and the given diaphragm with the plunger (picture 3). (Picture 4) Make allowance for the different headlamp variants here (there are different outlet openings). Check if the headlamp needs to be removed to gain access to the diagnostic socket on the headlamp housing. Plug the adapter onto the diagnostic socket on the headlamp housing. (Picture 5). Apply a maximum of 30 mbar overpressure to the headlamp housing. Note: If the maximum overpressure of 50 mbar is exceeded the headlamp seal will be damaged. If a pressure drop of less than 10 mbar is measured within 30 seconds, the headlamp is not leaky and the problem is down to natural physical fogging. If a pressure drop of more than 10 mbar is measured within 30 seconds, the headlamp is leaky. Note: The leaky position can be localized with the aid of soap suds. Replace any leaky headlamps. Note: Desiccant packs can be installed for headlamps that are not leaky. See: LI82.10-P-064766 Fogged headlamp, desiccant pack installed - open ventilation system LI82.10-P-078304 Fogged headlamp, desiccant pack installed - closed ventilation system
- 11007790Complaint Headlamps fogged or droplets forming. Cause Due to the housing cover with pressure compensation diaphragm, the headlamps are a "closed system". This means that the headlamps are protected against acid gases, dirt and exhaust gas. However, moisture can still enter from two sources. Through absorption and desorption (the commonest cause) or through permeation. Moisture is either absorbed by the plastic material and, when the light source is switched on, it is released from the plastic by desorption, or the moisture penetrates through the plastic materials of the headlamp from outside (permeation). This can lead to the formation of condensation on the lens of the headlamp. The headlamps comply with all applicable US standards and regulations. Remedy Check headlamps for natural fogging or condensation as per LI82.10-P-078301. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. Note: Order service covers and desiccant packs based on the validity description. 1. Remove existing service cover with diaphragm (Picture_01 (1)). 2. Insert desiccant packs (Picture_01 (2)) into new service covers with diaphragm and seal with protective grille and bolt down (Picture_01 (3)). Note: One desiccant pack is required for each small service cover, and two desiccant packs are required for each large service cover. 3. Stick the supplied diaphragm onto the new service cover and attach at the headlamp. Note: The bonding surface must be clean and dry. 4. If the headlamp housing has an additional 2nd diaphragm, this must be covered over with masking tape. Note: The bonding surface must be clean and dry. To ensure that the desiccant pack (absorption) acts effectively, the headlamp has to be air-sealed. Observe or check the following points for this: 1. Seals at the central connector must all be present and correctly fitted (Picture_02). 2. The new transparent diaphragm must be correctly bonded (Picture_03). 3. Check headlamp housing for any external damage.
- 11007753Complaint Headlamp or front fog lamp leaky or fogged Cause Fogging of the headlamps is a natural phenomenon, which can occur under certain climatic conditions. It does not lead to any technical impairment of the headlamp. Headlamps comply with all applicable standards. If a pressure compensation diaphragm is fitted in the housing cover, then the lamp unit is a "closed system". Remedy Headlamp: Remedy 1 Clearing fogged/condensed LED headlamps and LED rear lamps: 1. Drive vehicle into workshop (temperature higher than +18 C/+64.4 F) and connect the exhaust extraction. Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the hood or trunk. 4. Switch on the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Clearing fogged/condensed halogen/xenon headlamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4F). Note: Do not perform an engine wash before the defogging test. 2. Switch off the engine. 3. Open the hood. 4. Switch off the lights. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation, a significant reduction in the formation of condensation must be clearly recognizable (thawing progress). Note: If there is no visible reduction in the formation of condensation, check the headlamp for a defect. (See Remedy 2) It is not physically possible to defog the headlamps completely. Fogging does not impair the operation or the service life of the headlamp. Remedy 2 A Damaged headlamp can be identified as follows: 1. Check the headlamp for external damage and that the cover caps and the diaphragm are correctly seated. 2. Check the electrical connectors of the plugs and pins. 3. Check for leak tightness in accordance with LI82.10-P-078307. The test can only be conducted on headlamps. 4. If the headlamp or the rear lamp has any external damage, replace the component part in accordance with the WIS instructions. Note: External damage to the headlamp/rear lamp or faulty seating of the cover caps does not present a warranty or goodwill case. With headlamps, it is possible to install desiccant packs if the problem occurs repeatedly. Open ventilation system: LI82.10-P-064766. Closed ventilation system LI82.10-P-078304
- 11005294Complaint Rear lamps fogged up/not leaktight. Cause Fogging of the rear lamps is a natural phenomenon, which can occur under certain climatic conditions. This does not lead to any technical impairment of the rear lamps. Remedy Rear lamp: Remedy 1: Clearing fogged/condensed rear lamps: 1. Drive the vehicle into the workshop (temperature higher than +18 C/+64.4 F) Note: Do not wash the vehicle or subject it to high-pressure cleaning before the defogging test. 2. Switch off the engine and connect battery support via a charger. 3. Open the trunk. 4. Switch on the exterior lighting. 5. Leave the vehicle in this state for 60 minutes. 6. Check for formation of condensation -> a significant reduction in the formation of condensation must be clearly recognizable (defogging progress).
- 10248162Crease formation on genuine leather seat covers in vehicles with low mileage Objects left on the seats for extended periods of time (pressure marks). Objects wedged between the seat backrest and seat cushion (e.g. seat belt buckle). Light initial creases due to vehicle handling. Light creases in the outer covers originating from the production process (missing finish). Heat treatment of the seat covers using heat gun and plastic wedge. Be very careful to not overheat the seat material!
- 10246281Fault code P06DA00 is found current or stored in engine control unit. Check engine light may be activated. Various causes Up to Model year 2018 Fault code P06DA00 can be disregarded if not activating the check engine light, unless otherwise specified in the guided test. The vehicle continues to operate as designed. Further causes should be investigated if complaint of check engine light is received. If fault code P06DA00 is activating the check engine light, update software of the ME control unit. No further repairs needed if the code no longer activates check engine light after 2 drive cycles. Model year 2019 and later Fault code P06DA00 will activate check engine light as of model year 2019. No driveability concerns will be observed, only illumination of the CEL. This fault code indicates high resistance or open in the circuit to Y130 oil pump control valve. Perform guided test for component Y130 under list of tests in ME. Diagnose location of high resistance or open in Y130 circuit and repair as necessary. Warranty claims submitted without supporting guided test results may be subject to debit.
- 10241790The Mercedes me connect services cannot be activated. The remote status data does not update. Error in N112/9 - control unit for telematics services (HERMES). In the HERMES control unit log, under the "URL" tab, the value DEFAULT is stored for "atpServerUrl" and/or "rcsServerUrl". Please carry out a re-commissioning of the control unit N112/9 - Control unit for telematics services (HERMES), which includes both a software update as well as coding. The fault will be rectified by the newly included coding. As a result of the software update to the current software of the control unit N112/9 - Control unit for telematics services (HERMES), this fault will no longer occur in future.
- 10235989This Service Campaign has been initiated because Daimler AG (DAG) has determined that the air ducts under the instrument panel may not correspond to foot-well airflow specifications. To remedy this situation an authorized Mercedes-Benz Dealer with check, and retrofit the air ducts if necessary.
- 10235980The following part numbers should no longer be installed and any existing stock on hand must be returned to your facing PDC via Special Return, use Item Category SCM Authorized Part Return; include a copy of the NCA as your authorization to return these parts. This special return will not affect your return allowance and will not be accepted after the specified date. Substitution link were entered into Paragon. Please place orders to replenish your inventory, as needed.
- 10206077"MY15+ M278 and M157 Equipped Vehicles with Fault Code ""P023400 Boost Pressure is Too High"" "
- 10205841Spare wheel.
- 10205247Traffic information service and posibly the voice control, nonfunctional after navigation software update.
- 10205237The COMAND unit does not start or the display remains dark.
- 10205234Software update of COMAND Online control unit.
- 10205233Mobile phone cotacts are not transferred completely.
- 10205218New roller blind with blind bearing does not fit in previous panoramic with old roof mechanisms or blind guide rails.
- 10205200Parktronic inoperable.
- 10205156Intial startup not possible after replacement of transmisson 725.0 or of electrohydraulic controller unit.
- 10205154Gasket may settle causing a slight oil leak.
- 10199675Vibrations/ humming when moving off or maneuvering with the wheels turned
- 10187793Mercedes-Benz AG (?MBAG?), the manufacturer of Mercedes-Benz, has determined that on certain Model Year (?MY?) 2013-2017 B-Class, C-Class, CLA-Class, CLS-Class, E-Class, G-Class, GL-Class, GLA-Class, GLC-Class, GLE-Class, GLK-Class, GLS-Class, GT-Class, M-Class, S-Class, SL-Class, and SLK-Class (117, 156, 166, 172, 190, 204, 205, 207, 212, 217, 218, 222, 231, 242, 253, 292, and 463 platform), the software for the PASS control unit does not meet current series production configuration and therefore the possibility exists that a correct GPS position cannot be determined in the control unit for location based services, and an incorrect vehicle position may be displayed. Please note the E-call feature is not impacted by this issue. What We?re Doing MBUSA will conduct a Service Campaign. An authorized Mercedes-Benz dealer will update the PASS Control Unit Software
- 10183259Mercedes-Benz AG (?MBAG?), the manufacturer of Mercedes-Benz vehicles, has determined that on certain Model Year (?MY?) 2012-2015 Mercedes-Benz Model 204 and 172 vehicles (C250 and SLK250), the warranty on the camshaft adjuster will be extended from the original 4 years/50,000 miles to 10 years/120,000 miles (whichever occurs first) from the original warranty start date.
- 10179966Incorrect time and/or instrument cluster message "SOS, service not activated" and/or Mercedes Me connect services nonfunctional
- 10179907Engine diagnosis warning lamp activated - Fault code P012800
- 10179904Implausible "service due" instrument cluster message, head unit pop-up, or Mmc message
- 10177571Lamp unit fogged or droplets forming. Due to the vent openings, the lamp unit is an "open system". This means that acidic gases, moisture, dirt and exhaust gases can penetrate it. This can result in deposits on the diffuser and lens. Check housing cover of lamp unit for natural fogging or dew as per GI82.10-P-009047. . 1. If a reduction in the degree of fogging is visible, the desiccant packs can be used once the condensation has completely evaporated. 1.1. Order the required service covers by referring to the variant overview. 1.2. Remove lamp unit 1.3. Remove all grommets from vent openings. 1.4. Seal vent openings with sealing profile. Important: All openings must be sealed carefully for the pressure compensation membrane to work properly! 1.5. Remove existing service cover 1.6. Place desiccant packs in new service covers and bolt down 1.7. Stick new diaphragm onto specified surface on service cover [picture of service cover] Note: The bonding surface must be clean and dry. 06
- 10176670To enhance the satisfaction of our customers, avoid further costs of litigation and return focus to its core businesses, Mercedes-Benz USA, LLC (MBUSA) has entered into a settlement regarding claims relating to alleged mold and mildew type odors originating from the HVAC system in certain Mercedes-Benz vehicles. As part of the settlement, MBUSA has agreed to offer sliding-scale warranty coverage for certain vehicles diagnosed as having mold or mildew type odors originating from the HVAC system?although that coverage will not take effect until the settlement is judicially approved and other events occur; likely not until December 7, 2020 at the earliest (see below). If the settlement becomes effective, coverage will include cleaning of the evaporator and replacement of the HVAC filters
- 10171637Retrofitted front door exit lamps with logo projection flicker
- 10169602Replace Steering Gear Bolts
- 10169599Squeaking Noise from Exhaust Gas Flap
- 10167551Vehicle wanders to the left or right.
- 10167550Single, throttle lift-off, clunking noise from the side shaft when starting off (audible at the wheel). The clunk is heard once when changing from forward to reverse (and vice versa).
Every Mercedes-Benz CLA250 model year
Bars are owner complaints, dots mark years with recalls. Select a year to open its report.